Advanced search
Publication Cover
Philosophical Magazine Volume 83, 2003 - Issue 26
Submit an article Journal homepage
568
Views
148
CrossRef citations to date
0
Altmetric
Original Articles

Nanostructures and deformation mechanisms in a cryogenically ball-milled Al-Mg alloy

X. Z. Liao Division of Materials Science and Technology, Los Alamos National Laboratory, Los Alamos, New Mexico, 87545, USA
,
J. Y. Huang Division of Materials Science and Technology, Los Alamos National Laboratory, Los Alamos, New Mexico, 87545, USA
,
Y. T. Zhu Division of Materials Science and Technology, Los Alamos National Laboratory, Los Alamos, New Mexico, 87545, USA
,
F. Zhou Department of Chemical Engineering and Materials Science, University of California, Davis, California, 95616, USA
&
E. J. Lavernia Department of Chemical Engineering and Materials Science, University of California, Davis, California, 95616, USA
Pages 3065-3075 | Published online: 15 Nov 2010

Citations (148)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (12)

Shuang Li, Lei Li, Ayoub Soulami, Cynthia A. Powell, Suveen Mathaudhu, Arun Devaraj & Chongmin Wang. (2022) In-situ observation of deformation twin associated sub-grain boundary formation in copper single crystal under bending. Materials Research Letters 10:7, pages 488-495.
Read now
Walaa Abd-Elaziem, Mohsen A. Hassan, Takehiko Makino & Atef Hamada. (2021) Grain size affecting the deformation characteristics via micro-injection upsetting. Materials Science and Technology 37:10, pages 918-929.
Read now
Walaa Abdel-Aziem, Atef Hamada, Takehiko Makino & M. Hassan. (2020) Microstructural evolution during extrusion of equal channel angular-pressed AA1070 alloy in micro/mesoscale. Materials Science and Technology 36:11, pages 1169-1177.
Read now
Xiaotian Fang, Xiaolong Ma, Liwen Zhang & Yuntian Zhu. (2016) Nucleation of deformation twins in nanocrystalline fcc alloys. Philosophical Magazine 96:36, pages 3790-3802.
Read now
Xiaoli Kang, Fan Yang, Jiangshan Luo & Yongjian Tang. (2015) Thermal-Ignition and Combustion Behavior of Pyrotechnic Composition Containing Mechanically Activated Commercial Mg-Al Alloy. Combustion Science and Technology 187:6, pages 963-975.
Read now
S.S. Razavi-Tousi & J.A. Szpunar. (2015) Microstructural evolution and grain subdivision mechanisms during severe plastic deformation of aluminum particles by ball milling. Philosophical Magazine 95:13, pages 1425-1447.
Read now
X.L. Ma, W.Z. Xu, H. Zhou, J.A. Moering, J. Narayan & Y.T. Zhu. (2015) Alloying effect on grain-size dependent deformation twinning in nanocrystalline Cu–Zn alloys. Philosophical Magazine 95:3, pages 301-310.
Read now
F. Wu, Y.T. Zhu & J. Narayan. (2014) Macroscopic Twinning Strain in Nanocrystalline Cu. Materials Research Letters 2:2, pages 63-69.
Read now
Baolong Zheng, Ying Li, Weizong Xu, Yizhang Zhou, Suveen N. Mathaudhu, Yuntian Zhu & Enrique J. Lavernia. (2013) Twinning in cryomilled nanocrystalline Mg powder. Philosophical Magazine Letters 93:8, pages 457-464.
Read now
Troy D. Topping, Tao Hu, K. Manigandan, T.S. Srivatsan & E.J. Lavernia. (2013) Quasi-static deformation and final fracture behaviour of aluminium alloy 5083: influence of cryomilling. Philosophical Magazine 93:8, pages 899-921.
Read now
Baolong Zheng, Ying Li, John E. Smugeresky, Yizhang Zhou, Dean Baker & Enrique J. Lavernia. (2011) Hybrid Al + Al3Ni metallic foams synthesized in situ via laser engineered net shaping. Philosophical Magazine 91:26, pages 3473-3497.
Read now
M.Yu. Gutkin, I.A. Ovid’ko & N.V. Skiba. (2008) Crack-stimulated generation of deformation twins in nanocrystalline metals and ceramics. Philosophical Magazine 88:8, pages 1137-1151.
Read now

Articles from other publishers (136)

J.L. Dong, F.C. Li, Z.P. Gu, M.Q. Jiang, Y.H. Liu, G.J. Wang & X.Q. Wu. (2023) Impact resistance and energy dissipation mechanism of nanocrystalline CoCrNi medium entropy alloy nanofilm under supersonic micro-ballistic impact. International Journal of Plasticity 171, pages 103801.
Crossref
Siyu Xie, Wenjia Sun, Junliang Sun, Xinhua Wan & Jie Zhang. (2023) Apparent symmetry rising induced by crystallization inhibition in ternary co-crystallization-driven self-assembly. Nature Communications 14:1.
Crossref
Zizheng Song, Ranming Niu, Xiangyuan Cui, Elena V. Bobruk, Maxim Yu. Murashkin, Nariman A. Enikeev, Ji Gu, Min Song, Vijay Bhatia, Simon P. Ringer, Ruslan Z. Valiev & Xiaozhou Liao. (2023) Mechanism of room-temperature superplasticity in ultrafine-grained Al–Zn alloys. Acta Materialia 246, pages 118671.
Crossref
Xiang Wang, Sixue Zheng, Chuang Deng, Christopher R. Weinberger, Guofeng Wang & Scott X. Mao. (2023) In Situ Atomic-Scale Observation of 5-Fold Twin Formation in Nanoscale Crystal under Mechanical Loading . Nano Letters 23:2, pages 514-522.
Crossref
Yuntian Zhu & Xiaolei Wu. (2023) Heterostructured materials. Progress in Materials Science 131, pages 101019.
Crossref
Jingfan Zhang, Dengshan Zhou, Xueyong Pang, Bowen Zhang, Yue Li, Binhan Sun, Ruslan Z. Valiev & Deliang Zhang. (2023) Deformation-induced concurrent formation of 9R phase and twins in a nanograined aluminum alloy. Acta Materialia 244, pages 118540.
Crossref
Yuntian Zhu & Xiaolei Wu. 2023. Introduction to Heterostructured Materials. Introduction to Heterostructured Materials 31 50 .
Dengshan Zhou, Xiuzhen Zhang, Ali Tehranchi, Junhua Hou, Wenjun Lu, Tilmann Hickel, Dirk Ponge, Dierk Raabe & Deliang Zhang. (2022) Stacking faults in a mechanically strong Al(Mg)–Al3Mg2 composite. Composites Part B: Engineering 245, pages 110211.
Crossref
Guojian Lin, Zhengwei Guo, Lu Li, Yugeng Li, Yanhua Sun, Yuzhang Li & Jia Wang. (2022) The annealing microstructural evolution of Al-10Zn alloy prepared by continuous extrusion of mixed heterogeneous elemental powders. Materials Research Express 9:6, pages 066508.
Crossref
Peng Gao, Zihao Ma, Ji Gu, Song Ni, Tao Suo, Yulong Li, Min Song, Yiu-Wing Mai & Xiaozhou Liao. (2021) Exceptional high-strain-rate tensile mechanical properties in a CrCoNi medium-entropy alloyCrCoNi中熵合金优异的高应变速率拉伸力学性能. Science China Materials 65:3, pages 811-819.
Crossref
Lianxin Li, Tinghong Gao, Quan Xie & Zean Tian. (2022) Analysis of grain size and five-fold twins during rapid solidification processes inTi 3 Al alloy . RSC Advances 12:11, pages 6440-6448.
Crossref
Yingbin Chen, Shuchun Zhao, Qishan Huang, Qi Zhu, Kexing Song, Haofei Zhou & Jiangwei Wang. (2022) A geometrical model for grain boundary migration mediated formation of multifold twins. International Journal of Plasticity 148, pages 103128.
Crossref
Xiaolong Ma, Yuntian Zhu & Mohamad Ramadan. 2022. Encyclopedia of Smart Materials. Encyclopedia of Smart Materials 412 431 .
Hao Wang, Dengke Chen, Xianghai An, Yin Zhang, Shijie SunYanzhong TianZhefeng ZhangAnguo Wang, Jinqiao Liu, Min Song, Simon P. Ringer, Ting Zhu & Xiaozhou Liao. (2021) Deformation-induced crystalline-to-amorphous phase transformation in a CrMnFeCoNi high-entropy alloy. Science Advances 7:14.
Crossref
M. Prashanth, R. Karunanithi, S. Rasool Mohideen & S. Sivasankaran. (2021) An exploration on microstructural observation and mechanical behavior of nanocrystallite Al 7017 alloy via mechanical alloying and uniaxial hot pressing. Materials Characterization 171, pages 110803.
Crossref
M. Prashanth, R. Karunanithi, S. Rasool Mohideen, A. Karthik & Prasanta Kumar Rout. 2021. Advances in Design and Thermal Systems. Advances in Design and Thermal Systems 81 93 .
Shuchun Zhao, Qi Zhu, Kexing Song, Haofei Zhou & Jiangwei Wang. (2020) Role of intersecting grain boundary on the deformation of twin-twin intersection. Scripta Materialia 188, pages 184-189.
Crossref
Qinqin Shao, Jinming Guo, Jianghua Chen & Zaoli Zhang. (2020) Atomic-scale investigation on the structural evolution and deformation behaviors of Cu–Cr nanocrystalline alloys processed by high-pressure torsion. Journal of Alloys and Compounds 832, pages 154994.
Crossref
Jinming Guo, Qinqin Shao, Oliver Renk, Lei Li, Yunbin He, Zaoli Zhang & Reinhard Pippan. (2020) Combined Fe and O effects on microstructural evolution and strengthening in Cu–Fe nanocrystalline alloys. Materials Science and Engineering: A 772, pages 138800.
Crossref
Guo-zheng QUAN, Rui-ju SHI, Jiang ZHAO, Qiao LIU, Wei XIONG & Hui-min QIU. (2019) Modeling of dynamic recrystallization volume fraction evolution for AlCu4SiMg alloy and its application in FEM. Transactions of Nonferrous Metals Society of China 29:6, pages 1138-1151.
Crossref
Yu. S. Projdak, V. Z. Kutsova, T. V. Kotova, H. P. Stetsenko & V. V. Prutchykova. (2019) Regularities of Formation of Structure, Texture and Properties under the Combined Plastic Deformation of the Low-Carbon and Ultralow-Carbon Steels for Cold Press Forming. Uspehi Fiziki Metallov 20:2, pages 213-284.
Crossref
Yang Cao, Song Ni, Xiaozhou Liao, Min Song & Yuntian Zhu. (2018) Structural evolutions of metallic materials processed by severe plastic deformation. Materials Science and Engineering: R: Reports 133, pages 1-59.
Crossref
Shubhadeep Maity, Arijit Sinha & Supriya Bera. (2018) A novel study on mechanically alloyed Al–Mg system by X-ray diffraction technique. Nano-Structures & Nano-Objects 16, pages 63-68.
Crossref
L. Wang, J. Teng, Y. Wu, J. Zou, G. Yu, Z. Zhang & X. Han. (2018) Size dependence of dislocation activities and independence on theoretical elastic strain limit in Pt nanocrystals revealed by atomic-resolution in situ investigation. Materials Today Nano 2, pages 1-6.
Crossref
Ligang Sun, Xiaoqiao He & Jian Lu. (2018) Nanotwinned and hierarchical nanotwinned metals: a review of experimental, computational and theoretical efforts. npj Computational Materials 4:1.
Crossref
Z.M. Wu, Y.X. Liang, E.G. Fu, J.L. Du & P.P. Wang. (2018) The process and mechanisms for the transformation of coarse grain to nanoscale grain in tungsten by ball milling. Powder Technology 326, pages 222-227.
Crossref
M. Chinababu, Kondaiah Gudimetla, K. Sivaprasad & B. Ravisankar. (2018) Microstructure and Mechanical properties of Cu-7wt.% Al Alloy produced by Equal Channel Angular pressing with different routes. Materials Today: Proceedings 5:2, pages 8241-8248.
Crossref
Bangwei Zhang. 2018. Physical Fundamentals of Nanomaterials. Physical Fundamentals of Nanomaterials 211 250 .
C. C. Koch, T. G. Langdon & E. J. Lavernia. (2017) Bulk Nanostructured Materials. Metallurgical and Materials Transactions A 48:11, pages 5181-5199.
Crossref
Ning Pang, Feng Ye & Ying Jiang. (2017) Synthesis of magnetically exchange coupled SrFe 12 O 19 /FeCo composites through cryogenic ball milling . Materials Research Express 4:7, pages 075031.
Crossref
N. Jia, Y. F. Shen, J. W. Liang, X. W. Feng, H. B. Wang & R. D. K. Misra. (2017) Nanoscale spheroidized cementite induced ultrahigh strength-ductility combination in innovatively processed ultrafine-grained low alloy medium-carbon steel. Scientific Reports 7:1.
Crossref
Wenqian Wu, Min Song, Song Ni, Jingshi Wang, Yong Liu, Bin Liu & Xiaozhou Liao. (2017) Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion. Scientific Reports 7:1.
Crossref
Zhenyu Zhang, Siling Huang, Leilei Chen, Zhanwei Zhu & Dongming Guo. (2017) Formation mechanism of fivefold deformation twins in a face-centered cubic alloy. Scientific Reports 7:1.
Crossref
Dongdong Zhao, Ole Martin Løvvik, Knut Marthinsen & Yanjun Li. (2017) Combined effect of Mg and vacancy on the generalized planar fault energy of Al. Journal of Alloys and Compounds 690, pages 841-850.
Crossref
Spencer L. Thomas, Alexander H. King & David J. Srolovitz. (2016) When twins collide: Twin junctions in nanocrystalline nickel. Acta Materialia 113, pages 301-310.
Crossref
Y.Z. Tian, L.J. Zhao, N. Park, R. Liu, P. Zhang, Z.J. Zhang, A. Shibata, Z.F. Zhang & N. Tsuji. (2016) Revealing the deformation mechanisms of Cu–Al alloys with high strength and good ductility. Acta Materialia 110, pages 61-72.
Crossref
Xiaolong Ma & Yuntian Zhu. 2016. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Y. Z. Tian, L. J. Zhao, S. Chen, A. Shibata, Z. F. Zhang & N. Tsuji. (2015) Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes. Scientific Reports 5:1.
Crossref
Yuefei Zhang, Jin Wang, Haiquan Shan & Kejie Zhao. (2015) Strengthening high-stacking-fault-energy metals via parallelogram nanotwins. Scripta Materialia 108, pages 35-39.
Crossref
Hossein Ramezanalizadeh, Masoud Emamy & Mohammadreza Shokouhimehr. (2015) A novel aluminum based nanocomposite with high strength and good ductility. Journal of Alloys and Compounds 649, pages 461-473.
Crossref
Haiming Wen, Yaojun Lin, David N. Seidman, Julie M. Schoenung, Isabella J. van Rooyen & Enrique J. Lavernia. (2015) An Efficient and Cost-Effective Method for Preparing Transmission Electron Microscopy Samples from Powders. Microscopy and Microanalysis 21:5, pages 1184-1194.
Crossref
Xiaohui Yang, Song Ni & Min Song. (2015) Partial dislocation emission in a superfine grained Al–Mg alloy subject to multi-axial compression. Materials Science and Engineering: A 641, pages 189-193.
Crossref
J.S. Carpenter, T. Nizolek, R.J. McCabe, M. Knezevic, S.J. Zheng, B.P. Eftink, J.E. Scott, S.C. Vogel, T.M. Pollock, N.A. Mara & I.J. Beyerlein. (2015) Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding. Acta Materialia 92, pages 97-108.
Crossref
Guangyu Liu, Ji Gu, Song Ni, Yong Liu & Min Song. (2015) Microstructural evolution of Cu–Al alloys subjected to multi-axial compression. Materials Characterization 103, pages 107-119.
Crossref
Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon & Y.T. Zhu. (2015) Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins. Scripta Materialia 100, pages 98-101.
Crossref
Zhu Xu, Ning Li, Huawen Jiang & Lin Liu. (2015) Deformation nanotwins in coarse-grained aluminum alloy at ambient temperature and low strain rate. Materials Science and Engineering: A 621, pages 272-276.
Crossref
Man-ping LIU, Ting-hui JIANG, Xue-feng XIE, Qiang LIU, Xue-feng LI & Hans J. ROVEN. (2014) Microstructure evolution and dislocation configurations in nanostructured Al–Mg alloys processed by high pressure torsion. Transactions of Nonferrous Metals Society of China 24:12, pages 3848-3857.
Crossref
Yaojun Lin, Haiming Wen, Ying Li, Bin Wen, Wei Liu & Enrique J. Lavernia. (2014) Erratum to: Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy. Metallurgical and Materials Transactions B 45:5, pages 1948-1964.
Crossref
M.R. Rokni, C.A. Widener, A.T. Nardi & V.K. Champagne. (2014) Nano crystalline high energy milled 5083 Al powder deposited using cold spray. Applied Surface Science 305, pages 797-804.
Crossref
Yaojun Lin, Haiming Wen, Ying Li, Bin Wen, Wei Liu & Enrique J. Lavernia. (2014) Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy. Metallurgical and Materials Transactions B 45:3, pages 795-810.
Crossref
Yaojun Lin, Haiming Wen, Ying Li, Bin Wen, Wei Liu & Enrique J. Lavernia. (2014) Stress-Induced Grain Growth in an Ultra-Fine Grained Al Alloy. Metallurgical and Materials Transactions A 45:6, pages 2673-2688.
Crossref
Yaojun Lin, Bocong Xu, Yongzhao Feng & Enrique J. Lavernia. (2014) Stress-induced grain growth during high-temperature deformation of nanostructured Al containing nanoscale oxide particles. Journal of Alloys and Compounds 596, pages 79-85.
Crossref
Mao Wen & Mingwei Chen. (2013) Comparative Study on Plastic Deformation of Nanocrystalline Al and Ni. Metallurgical and Materials Transactions A 45:3, pages 1631-1638.
Crossref
C. Hofmeister, A. Giri, S. Brennan, Y.H. Sohn, T. Delahanty & K. Cho. 2014. Light Metals 2014. Light Metals 2014 1339 1346 .
Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon & Y.T. Zhu. (2014) Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion. Acta Materialia 63, pages 16-29.
Crossref
C. Hofmeister, A. Giri, S. Brennan, Y. H. Sohn, T. Delahanty & K. Cho. 2016. Light Metals 2014. Light Metals 2014 1343 1346 .
Fuping Yuan & Xiaolei Wu. (2013) Formation sequences and roles of multiple deformation twins during the plastic deformation in nanocrystalline fcc metals. Materials Science and Engineering: A 580, pages 58-65.
Crossref
Y. Cao, Y.B. Wang, Z.B. Chen, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon & Y.T. Zhu. (2013) De-twinning via secondary twinning in face-centered cubic alloys. Materials Science and Engineering: A 578, pages 110-114.
Crossref
G. F. Zhang, X. Sauvage, J. T. Wang, N. Gao & T. G. Langdon. (2013) Evolution of a martensitic structure in a Cu–Al alloy during processing by high-pressure torsion. Journal of Materials Science 48:13, pages 4613-4619.
Crossref
Y. T. Zhu, X. Z. Liao, X. L. Wu & J. Narayan. (2013) Grain size effect on deformation twinning and detwinning. Journal of Materials Science 48:13, pages 4467-4475.
Crossref
Y. B. Wang, X. Z. Liao, Y. H. Zhao, J. C. Cooley, Z. Horita & Y. T. Zhu. (2013) Elemental separation in nanocrystalline Cu-Al alloys. Applied Physics Letters 102:23.
Crossref
S.Q. Zhu, H.G. Yan, J.H. Chen, Y.Z. Wu, Y.G. Du & X.Z. Liao. (2013) Fabrication of MgAlZnMn alloy sheets with homogeneous fine-grained structures using high strain-rate rolling in a wide temperature range. Materials Science and Engineering: A 559, pages 765-772.
Crossref
Y. Cao, Y. B. Wang, X. Z. Liao, M. Kawasaki, S. P. Ringer, T. G. Langdon & Y. T. Zhu. (2012) Applied stress controls the production of nano-twins in coarse-grained metals. Applied Physics Letters 101:23, pages 231903.
Crossref
Yaojun Lin, Bo Yao, Zhihui Zhang, Ying Li, Yongho Sohn, Julie M. Schoenung & Enrique J. Lavernia. (2012) Strain Energy During Mechanical Milling: Part II. Experimental. Metallurgical and Materials Transactions A 43:11, pages 4258-4265.
Crossref
Jitang Fan & Tao Fu. (2012) Toughened austenitic stainless steel by surface severe plastic deformation. Materials Science and Engineering: A 552, pages 359-363.
Crossref
Y.T. Zhu, X.Z. Liao & X.L. Wu. (2012) Deformation twinning in nanocrystalline materials. Progress in Materials Science 57:1, pages 1-62.
Crossref
Rampada Manna, N.K. Mukhopadhyay & G.V.S. Sastry. (2011) Grain Refinement Mechanisms Oterative during Equal Channel Angular Pressing of Aluminium. Materials Science Forum 702-703, pages 135-138.
Crossref
Y. Y. Zhang, X. K. Wu, H. Cui & J. S. Zhang. (2011) Cold-Spray Processing of a High Density Nanocrystalline Aluminum Alloy 2009 Coating Using a Mixture of As-Atomized and As-Cryomilled Powders. Journal of Thermal Spray Technology 20:5, pages 1125-1132.
Crossref
Michael B. Kerber, Michael J. Zehetbauer, Erhard Schafler, Florian C. Spieckermann, Sigrid Bernstorff & Tamas Ungar. (2011) X-ray line profile analysis—An ideal tool to quantify structural parameters of nanomaterials. JOM 63:7, pages 61-70.
Crossref
S. Ni, Y.B. Wang, X.Z. Liao, S.N. Alhajeri, H.Q. Li, Y.H. Zhao, E.J. Lavernia, S.P. Ringer, T.G. Langdon & Y.T. Zhu. (2011) Strain hardening and softening in a nanocrystalline Ni–Fe alloy induced by severe plastic deformation. Materials Science and Engineering: A 528:9, pages 3398-3403.
Crossref
M.Y. Gutkin. 2011. Nanostructured Metals and Alloys. Nanostructured Metals and Alloys 329 374 .
Y. Li, Y.J. Lin, Y.H. Xiong, J.M. Schoenung & E.J. Lavernia. (2011) Extended twinning phenomena in Al–4%Mg alloys/B4C nanocomposite. Scripta Materialia 64:2, pages 133-136.
Crossref
Y.T. Zhu, X.L. Wu, X.Z. Liao, J. Narayan, L.J. Kecskés & S.N. Mathaudhu. (2011) Dislocation–twin interactions in nanocrystalline fcc metals. Acta Materialia 59:2, pages 812-821.
Crossref
R.D.K. Misra, Z. Zhang, P.K.C. Venkatasurya, M.C. Somani & L.P. Karjalainen. (2010) Martensite shear phase reversion-induced nanograined/ultrafine-grained Fe–16Cr–10Ni alloy: The effect of interstitial alloying elements and degree of austenite stability on phase reversion. Materials Science and Engineering: A 527:29-30, pages 7779-7792.
Crossref
Troy D. Topping, Enrique J. Lavernia, M. Kuruvilla & T. S. Srivatsan. 2010. Fatigue of Materials. Fatigue of Materials 147 168 .
Peter V. Liddicoat, Xiao-Zhou Liao, Yonghao Zhao, Yuntian Zhu, Maxim Y. Murashkin, Enrique J. Lavernia, Ruslan Z. Valiev & Simon P. Ringer. (2010) Nanostructural hierarchy increases the strength of aluminium alloys. Nature Communications 1:1.
Crossref
Manping Liu, Hans J. Roven, Xintao Liu, Maxim Murashkin, Ruslan Z. Valiev, Tamas Ungár & Levente Balogh. (2010) Grain refinement in nanostructured Al–Mg alloys subjected to high pressure torsion. Journal of Materials Science 45:17, pages 4659-4664.
Crossref
Shan Jiang, Hongwu Zhang, Yonggang Zheng & Zhen Chen. (2010) Loading path effect on the mechanical behaviour and fivefold twinning of copper nanowires. Journal of Physics D: Applied Physics 43:33, pages 335402.
Crossref
Feng Shen, Jianqiu Zhou, Yingguang Liu, Rongtao Zhu, Shu Zhang & Ying Wang. (2010) Deformation twinning mechanism and its effects on the mechanical behaviors of ultrafine grained and nanocrystalline copper. Computational Materials Science 49:2, pages 226-235.
Crossref
R.D.K. Misra, S. Nayak, P.K.C. Venkatasurya, V. Ramuni, M.C. Somani & L.P. Karjalainen. (2010) Nanograined/Ultrafine-Grained Structure and Tensile Deformation Behavior of Shear Phase Reversion-Induced 301 Austenitic Stainless Steel. Metallurgical and Materials Transactions A 41:8, pages 2162-2174.
Crossref
Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, S.P. Ringer, Z. Horita, T.G. Langdon & Y.T. Zhu. (2010) The role of stacking faults and twin boundaries in grain refinement of a Cu–Zn alloy processed by high-pressure torsion. Materials Science and Engineering: A 527:18-19, pages 4959-4966.
Crossref
D. Anthony Fredenburg, Naresh N. Thadhani & Tracy J. Vogler. (2010) Shock consolidation of nanocrystalline 6061-T6 aluminum powders. Materials Science and Engineering: A 527:15, pages 3349-3357.
Crossref
Y.F. Shao & S.Q. Wang. (2010) Quasicontinuum study on formation of fivefold deformation twin in nanocrystalline aluminum. Scripta Materialia 62:6, pages 419-422.
Crossref
Y.B. Wang, M. Louie, Y. Cao, X.Z. Liao, H.J. Li, S.P. Ringer & Y.T. Zhu. (2010) High-pressure torsion induced microstructural evolution in a hexagonal close-packed Zr alloy. Scripta Materialia 62:4, pages 214-217.
Crossref
Yanbo Wang, Xiaozhou Liao & Yuntian Zhu. (2009) Grain refinement and growth induced by severe plastic deformation. International Journal of Materials Research 100:12, pages 1632-1637.
Crossref
R. Vogt, Z. Zhang, Y. Li, M. Bonds, N.D. Browning, E.J. Lavernia & J.M. Schoenung. (2009) The absence of thermal expansion mismatch strengthening in nanostructured metal–matrix composites. Scripta Materialia 61:11, pages 1052-1055.
Crossref
Y. Li, Y.H. Zhao, V. Ortalan, W. Liu, Z.H. Zhang, R.G. Vogt, N.D. Browning, E.J. Lavernia & J.M. Schoenung. (2009) Investigation of aluminum-based nanocomposites with ultra-high strength. Materials Science and Engineering: A 527:1-2, pages 305-316.
Crossref
Ilya A. Ovidko & A.G. Sheinerman. (2009) Crack Blunting through Lattice Dislocation Slip in Nanocrystalline and Ultrafine-Grained Materials. Materials Science Forum 633-634, pages 55-62.
Crossref
R.D.K. Misra, S. Nayak, S.A. Mali, J.S. Shah, M.C. Somani & L.P. Karjalainen. (2009) Microstructure and Deformation Behavior of Phase-Reversion-Induced Nanograined/Ultrafine-Grained Austenitic Stainless Steel. Metallurgical and Materials Transactions A 40:10, pages 2498-2509.
Crossref
Alexey E. Romanov & Anna L. Kolesnikova. (2009) Application of disclination concept to solid structures. Progress in Materials Science 54:6, pages 740-769.
Crossref
Y.T. Zhu, J. Narayan, J.P. Hirth, S. Mahajan, X.L. Wu & X.Z. Liao. (2009) Formation of single and multiple deformation twins in nanocrystalline fcc metals. Acta Materialia 57:13, pages 3763-3770.
Crossref
Manping Liu, Hans J. Roven, Maxim Murashkin & Ruslan Z. Valiev. (2009) Structural characterization by high-resolution electron microscopy of an Al–Mg alloy processed by high-pressure torsion. Materials Science and Engineering: A 503:1-2, pages 122-125.
Crossref
S. Qu, X.H. An, H.J. Yang, C.X. Huang, G. Yang, Q.S. Zang, Z.G. Wang, S.D. Wu & Z.F. Zhang. (2009) Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing. Acta Materialia 57:5, pages 1586-1601.
Crossref
Dieter Wolf & Vesselin Yamakov. 2009. Bulk Nanostructured Materials. Bulk Nanostructured Materials 165 199 .
Yuntian T. Zhu, Bing Q. Han & Enrique J. Lavernia. 2009. Bulk Nanostructured Materials. Bulk Nanostructured Materials 87 108 .
Yinmin M. Wang & Evan Ma. 2009. Bulk Nanostructured Materials. Bulk Nanostructured Materials 423 453 .
Tamás Ungár, Erhard Schafler & Jenö Gubicza. 2009. Bulk Nanostructured Materials. Bulk Nanostructured Materials 361 386 .
Xiaozhou Liao & Xiaoxu Huang. 2009. Bulk Nanostructured Materials. Bulk Nanostructured Materials 325 342 .
Bing Q. Han, Jichun Ye, A. Piers Newbery, Yuntian T. Zhu, Julie M. Schoenung & Enrique J. Lavernia. 2009. Bulk Nanostructured Materials. Bulk Nanostructured Materials 273 291 .
Z.W. Wang, Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, Y.T. Zhu, Z. Horita & T.G. Langdon. (2009) Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials. Scripta Materialia 60:1, pages 52-55.
Crossref
Y.H. Zhao, X.Z. Liao, Z. Horita, T.G. Langdon & Y.T. Zhu. (2008) Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu–Zn alloys. Materials Science and Engineering: A 493:1-2, pages 123-129.
Crossref
E.J. Lavernia, B.Q. Han & J.M. Schoenung. (2008) Cryomilled nanostructured materials: Processing and properties. Materials Science and Engineering: A 493:1-2, pages 207-214.
Crossref
Y. T. Zhu, X. Z. Liao & X. L. Wu. (2008) Deformation twinning in bulk nanocrystalline metals: Experimental observations. JOM 60:9, pages 60-64.
Crossref
Sandip Ghosh Chowdhury, Amit Mondal, Jenő Gubicza, György Krállics & Árpád Fodor. (2008) Evolution of microstructure and texture in an ultrafine-grained Al6082 alloy during severe plastic deformation. Materials Science and Engineering: A 490:1-2, pages 335-342.
Crossref
R.D.K. Misra, B. Ravi Kumar, M. Somani & P. Karjalainen. (2008) Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels. Scripta Materialia 59:1, pages 79-82.
Crossref
Manping Liu, Hans J. Roven, Yingda Yu & Jens C. Werenskiold. (2008) Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing. Materials Science and Engineering: A 483-484, pages 59-63.
Crossref
M. Brochu, T. Zimmerly, L. Ajdelsztajn, E.J. Lavernia & G. Kim. (2007) Dynamic consolidation of nanostructured Al–7.5%Mg alloy powders. Materials Science and Engineering: A 466:1-2, pages 84-89.
Crossref
Yuntian T. Zhu. (2007) Deformation Mechanisms of Nanocrystalline Materials. Materials Science Forum 539-543, pages 270-277.
Crossref
Manping Liu, Hans J. Roven & Yingda Yu. (2007) Deformation twins in ultrafine grained commercial aluminum. International Journal of Materials Research 98:3, pages 184-190.
Crossref
H. W. Zhang & N. Hansen. (2007) Deformed metals and alloys with a structural scale from 5 nm to 100 nm. Journal of Materials Science 42:5, pages 1682-1693.
Crossref
B. Q. Han, J. Ye, F. Tang, J. Schoenung & E. J. Lavernia. (2007) Processing and behavior of nanostructured metallic alloys and composites by cryomilling. Journal of Materials Science 42:5, pages 1660-1672.
Crossref
Tamás Ungár. (2006) Characterization of nanocrystalline materials by X-ray line profile analysis. Journal of Materials Science 42:5, pages 1584-1593.
Crossref
Jichun Ye, Zhonghoon Lee, Byungmin Ahn, Steve R. Nutt, Jianhong He & Julie M. Schoenung. (2006) Cryomilling for the fabrication of a particulate B4C reinforced Al nanocomposite: Part II. Mechanisms for microstructural evolution. Metallurgical and Materials Transactions A 37:10, pages 3111-3117.
Crossref
G. Lucadamo, N.Y.C. Yang, C. San Marchi & E.J. Lavernia. (2006) Microstructure characterization in cryomilled Al 5083. Materials Science and Engineering: A 430:1-2, pages 230-241.
Crossref
X. L. Wu & Y. T Zhu. (2006) Partial-dislocation-mediated processes in nanocrystalline Ni with nonequilibrium grain boundaries. Applied Physics Letters 89:3.
Crossref
Levente Balogh, Gábor Ribárik & Tamás Ungár. (2006) Stacking faults and twin boundaries in fcc crystals determined by x-ray diffraction profile analysis. Journal of Applied Physics 100:2.
Crossref
Zhihui Zhang, Bing Q. Han, Kyung H. Chung & Enrique J. Lavernia. (2006) On the behavior of microstructures with multiple length scales. Metallurgical and Materials Transactions A 37:7, pages 2265-2273.
Crossref
Y.H. Lu, Z.-J. Liu & Y.G. Shen. (2006) Investigation of nanostructure evolution and twinning of nanocrystallites in Ti–Bx–Ny nanocomposite thin films deposited by magnetron sputtering at low temperature by means of HRTEM and Monte Carlo simulations. Acta Materialia 54:11, pages 2897-2905.
Crossref
Yuntian T. Zhu. (2006) Deformation Twins Formed in Nanocrystalline Materials. Materials Science Forum 503-504, pages 125-132.
Crossref
D.B. Witkin & E.J. Lavernia. (2006) Synthesis and mechanical behavior of nanostructured materials via cryomilling. Progress in Materials Science 51:1, pages 1-60.
Crossref
Yuntian T. Zhu. 2006. Nanostructured Materials by High-Pressure Severe Plastic Deformation. Nanostructured Materials by High-Pressure Severe Plastic Deformation 3 11 .
Yuntian T. Zhu & Terence G. Langdon. (2005) Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials. Materials Science and Engineering: A 409:1-2, pages 234-242.
Crossref
C. Suryanarayana. (2005) Recent Developments in Nanostructured Materials. Advanced Engineering Materials 7:11, pages 983-992.
Crossref
Y. H. Lu, Z. K. Xu, Haydn Chen, Y. G. Shen & K. Y. Li. (2005) Effect of B content on nanostructure evolution and twinning deformation of nanocrystallite in nc-Ti(N,B)∕a-(TiB2,BN) nanocomposite thin films. Applied Physics Letters 87:15.
Crossref
Y. T. Zhu, X. Z. Liao, S. G. Srinivasan & E. J. Lavernia. (2005) Nucleation of deformation twins in nanocrystalline face-centered-cubic metals processed by severe plastic deformation. Journal of Applied Physics 98:3.
Crossref
F. Zhou, Z. Lee, S. R. Nutt & E. J. Lavernia. (2005) The influence of Sc on thermal stability of a nanocrystalline Al-Mg alloy processed by cryogenic ball milling. Metallurgical and Materials Transactions A 36:6, pages 1587-1594.
Crossref
B. Q. Han & E. J. Lavernia. (2005) Deformation Mechanisms of Nanostructured Al Alloys. Advanced Engineering Materials 7:6, pages 457-465.
Crossref
B. Q. Han & E.J. Lavernia. (2005) High‐strain‐rate Superplasticity in a Nanostructured Al‐Mg Alloy. Advanced Engineering Materials 7:4, pages 247-250.
Crossref
Y. T. Zhu, X. Z. Liao & R. Z. Valiev. (2005) Formation mechanism of fivefold deformation twins in nanocrystalline face-centered-cubic metals. Applied Physics Letters 86:10.
Crossref
Leonardo Ajdelsztajn, Julie M. Schoenung, Bertrand Jodoin & George E. Kim. (2005) Cold spray deposition of nanocrystalline aluminum alloys. Metallurgical and Materials Transactions A 36:3, pages 657-666.
Crossref
D. Wolf, V. Yamakov, S.R. Phillpot, A. Mukherjee & H. Gleiter. (2005) Deformation of nanocrystalline materials by molecular-dynamics simulation: relationship to experiments?. Acta Materialia 53:1, pages 1-40.
Crossref
X. Z. Liao, Y. H. Zhao, Y. T. Zhu, R. Z. Valiev & D. V. Gunderov. (2004) Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion. Journal of Applied Physics 96:1, pages 636-640.
Crossref
F. Zhou, D. Witkin, S.R. Nutt & E.J. Lavernia. (2004) Formation of nanostructure in Al produced by a low-energy ball milling at cryogenic temperature. Materials Science and Engineering: A 375-377, pages 917-921.
Crossref
X. Z. Liao, Y. H. Zhao, S. G. Srinivasan, Y. T. Zhu, R. Z. Valiev & D. V. Gunderov. (2004) Deformation twinning in nanocrystalline copper at room temperature and low strain rate. Applied Physics Letters 84:4, pages 592-594.
Crossref
F. Zhou, Z. Lee, E. J. Lavernia & S.R. Nutt. (2011) Bimodal Microstructures in Nanocrystalline Al and Al-Mg Alloy Powders Prepared by Cryogenic Ball Milling. MRS Proceedings 821.
Crossref
X. Z. Liao, F. Zhou, E. J. Lavernia, D. W. He & Y. T. Zhu. (2003) Deformation twins in nanocrystalline Al. Applied Physics Letters 83:24, pages 5062-5064.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.