Advanced search
Publication Cover
Philosophical Magazine Volume 87, 2007 - Issue 24
Submit an article Journal homepage
1,451
Views
81
CrossRef citations to date
0
Altmetric
Original Articles

Selection of α variants during microstructural evolution in α/β titanium alloys

E. Lee Center for the Accelerated Maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, Ohio, USA
,
R. Banerjee Department of Materials Science and Engineering, University of North Texas, Denton, Texas, USACorrespondence[email protected].
,
S. Kar Center for the Accelerated Maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, Ohio, USA
,
D. Bhattacharyya Center for the Accelerated Maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, Ohio, USA
&
H. L. Fraser Center for the Accelerated Maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, Ohio, USA
Pages 3615-3627 | Received 15 Aug 2006, Accepted 28 Mar 2007, Published online: 22 Oct 2010

Citations (81)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

Abdul Khadar Syed, Mustafa Awd, Frank Walther & Xiang Zhang. (2019) Microstructure and mechanical properties of as-built and heat-treated electron beam melted Ti–6Al–4V. Materials Science and Technology 35:6, pages 653-660.
Read now

Articles from other publishers (80)

Soham Mukherjee, Joysurya Basu & Rajiv Kumar Mandal. (2024) Structural transformations and characterisation in nano-engineered alloys. Progress in Crystal Growth and Characterization of Materials 70:1, pages 100606.
Crossref
Yu Wang, Zhichao Sun, Zhikun Yin, Lijiao Yin & Zhenyu Dang. (2023) Evolution of Lamellar α in Ti6242S Ti-Alloy After β-Forging Combined with Two-phase Zone Heat Treatment. JOM.
Crossref
Ahmet Alptug Tanrikulu, Aditya Ganesh-Ram, Behzad Farhang & Amirhesam Amerinatanzi. (2023) Unveiling the impact of layerwise laser preheating on microstructure and mechanical response in laser powder bed fusion. Journal of Materials Science 58:45, pages 17362-17382.
Crossref
Jianwei Xu, Weidong Zeng, Zhishou Zhu, Mingbing Li, Jingyao Du & Xinnan Wang. (2023) Morphology evolution and orientation characteristics of precipitate of ultra-high strength titanium alloy. Materials Today Communications, pages 106619.
Crossref
Yan Chong, Reza Gholizadeh, Kaichi Yamamoto & Nobuhiro Tsuji. (2023) New insights into the colony refinement mechanism by solute boron atoms in Ti-6Al-4V alloy. Scripta Materialia 230, pages 115397.
Crossref
Yan Chong, Jangho Yi, Guanyu Deng & Nobuhiro Tsuji. (2023) On the Aging Behavior of Ti-1.0 wt pct Fe Alloy With an Equiaxed α + β Initial Microstructure. Metallurgical and Materials Transactions A 54:6, pages 2133-2145.
Crossref
Charlotte de Formanoir & Roland E. Logé. 2023. Quality Analysis of Additively Manufactured Metals. Quality Analysis of Additively Manufactured Metals 261 320 .
Jianwei Xu, Weidong Zeng, Zhishou Zhu, Mingbing Li, Jingyao Du, Shengtong He & Xinnan Wang. (2022) Precipitation and evolution behaviors of grain boundary α and α side plates for ultra-high strength titanium alloy during continuous cooling. Materials & Design, pages 111562.
Crossref
Bowen Zhang, Zhujun Liu, Xiaogang Wu & Deliang Zhang. (2022) Sustaining an excellent strength-ductility combination of a PM α + β titanium alloy with fine prior β grains and heterogeneous microstructure. Journal of Alloys and Compounds 926, pages 166736.
Crossref
Runchen Jia, Weidong Zeng, Zibo Zhao, Simin Wang, Jianwei Xu & Qingjiang Wang. (2022) Growth mechanism of αp and interface relationships between αp and αs during cooling of a near α titanium alloy. Materials & Design 223, pages 111191.
Crossref
Ming Chen, Steven Van Petegem, Zhiyi Zou, Marco Simonelli, Yau Yau Tse, Cynthia Sin Ting Chang, Malgorzata Grazyna Makowska, Dario Ferreira Sanchez & Helena Moens-Van Swygenhoven. (2022) Microstructural engineering of a dual-phase Ti-Al-V-Fe alloy via in situ alloying during laser powder bed fusion. Additive Manufacturing 59, pages 103173.
Crossref
Inna A. Naschetnikova, Stepan I. Stepanov, Andrey A. Redikultsev, Valentin Yu. Yarkov, Maria A. Zorina & Mikhail L. Lobanov. (2022) Crystallographic Features of Phase Transformations during the Continuous Cooling of a Ti6Al4V Alloy from the Single-Phase β-Region. Materials 15:17, pages 5840.
Crossref
Rongpei Shi, Dian Li, Stoichko Antonov, Xingjun Liu & Yufeng Zheng. (2022) Origin of morphological variation of grain boundary precipitates in titanium alloys. Scripta Materialia 214, pages 114651.
Crossref
Yu Wang, Zhichao Sun, Zhikun Yin, Lijiao Yin & Long Huang. (2022) Formation and characteristics of bilamellar microstructure in Ti6242S titanium alloy under dual heat treatment. Materials Characterization 187, pages 111835.
Crossref
Long Huang, Zhichao Sun, Jing Cao, Zhikun Yin, Yu Wang & Lijiao Yin. (2021) The evolution of primary alpha phase and its effect on microtexture in Ti6242S during post-deformation heat treatment. Journal of Alloys and Compounds 885, pages 160894.
Crossref
Jinhu Zhang, Xuexiong Li, Dongsheng Xu, Chunyu Teng, Hao Wang, Liang Yang, Hongtao Ju, Haisheng Xu, Zhichao Meng, Yingjie Ma, Yunzhi Wang & Rui Yang. (2021) Phase field simulation of the stress-induced α microstructure in Ti–6Al–4 V alloy and its CPFEM properties evaluation. Journal of Materials Science & Technology 90, pages 168-182.
Crossref
Xiongxiong Gao, Saifei Zhang, Lei Wang, Kun Yang, Peng Wang & Hongyuan Chen. (2021) Evolution of grain boundary α phase during cooling from β phase field in a α + β titanium alloy. Materials Letters 301, pages 130318.
Crossref
Thorsten Hermann Becker, Punit Kumar & Upadrasta Ramamurty. (2021) Fracture and fatigue in additively manufactured metals. Acta Materialia 219, pages 117240.
Crossref
Muhammad Rizwan, Junxia Lu, Fei Chen, Ruxia Chai, Rafi Ullah, Yuefei Zhang & Ze Zhang. (2021) Microstructure Evolution and Mechanical Behavior of Laser Melting Deposited TA15 Alloy at 500 °C under In-Situ Tension in SEM. Acta Metallurgica Sinica (English Letters) 34:9, pages 1201-1212.
Crossref
Ryan DeMott, Nima Haghdadi, Xiaozhou Liao, Simon P. Ringer & Sophie Primig. (2021) 3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4 V. Journal of Materials Science 56:26, pages 14763-14782.
Crossref
Yu Zhang, Renlong Xin, Baoqi Guo, Ke Wang & Qing Liu. (2021) Influence of alternate grain boundary α on the development of Widmanstätten microstructure in TC21 Ti alloy. Materials Characterization 177, pages 111162.
Crossref
Ke Hua, Fan Zhang, Hongchao Kou, Qiong Wan, Yongliang Zhang, Weimin Gan & Jinshan Li. (2021) New insight into deformation induced α variant selection in a metastable β titanium alloy during isothermal compression at 600 ​°C. Progress in Natural Science: Materials International 31:3, pages 471-476.
Crossref
Mariana C.M. Rodrigues, Thomas Garcin & Matthias Militzer. (2021) In-situ measurement of α formation kinetics in a metastable β Ti-5553 alloy using laser ultrasonics. Journal of Alloys and Compounds 866, pages 158954.
Crossref
Igor Drstvenšek, Franc Zupanič, Tonica Bončina, Tomaž Brajlih & Snehashis Pal. (2021) Influence of local heat flow variations on geometrical deflections, microstructure, and tensile properties of Ti-6Al-4 V products in powder bed fusion systems. Journal of Manufacturing Processes 65, pages 382-396.
Crossref
D. Suárez Fernández, B.P. Wynne, P. Crawforth & M. Jackson. (2021) Titanium alloy microstructure fingerprint plots from in-process machining. Materials Science and Engineering: A 811, pages 141074.
Crossref
Huan Wang, Yongqing Zhao, Qinyang Zhao, Shewei Xin, Wei Zhou & Weidong Zeng. (2021) Microstructure evolution and fracture behavior of Ti-5Al-3Mo-3V-2Zr-2Cr-1Nb-1Fe alloy during BASCA heat treatments. Materials Characterization 174, pages 110975.
Crossref
Long Huang, Zhichao Sun, Jing Cao & Zhikun Yin. (2021) The formation and evolution of macrozone in Ti-6242S alloy during thermo-mechanical processing. Journal of Alloys and Compounds 861, pages 158533.
Crossref
Long Huang, Zhichao Sun, Jing Cao & Zhikun Yin. (2021) The precipitation mechanism of secondary α-phase and formation of a bimodal microstructure in Ti6242S alloy cooled from the α + β phase field. Journal of Alloys and Compounds 855, pages 157428.
Crossref
D. Suárez Fernández, B.P. Wynne, P. Crawforth, K. Fox & M. Jackson. (2021) The effect of forging texture and machining parameters on the fatigue performance of titanium alloy disc components. International Journal of Fatigue 142, pages 105949.
Crossref
A.E. Davis, J.R. Hönnige, F. Martina & P.B. Prangnell. (2020) Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis. Materials Characterization 170, pages 110673.
Crossref
P.L. Stephenson, N. Haghdadi, R. DeMott, X.Z. Liao, S.P. Ringer & S. Primig. (2020) Effect of scanning strategy on variant selection in additively manufactured Ti-6Al-4V. Additive Manufacturing 36, pages 101581.
Crossref
Zhiying Zheng, Linjiang Chai, Kang Xiang, Weijiu Huang, Yongfeng Wang, Liangliang Liu & Lin Tian. (2020) Typical Microstructural Characteristics of Ti–5Al–5Mo–5V–3Cr–1Fe Metastable β Ti Alloy Forged in α + β Region. Acta Metallurgica Sinica (English Letters) 33:12, pages 1601-1608.
Crossref
Ryan DeMott, Peter Collins, Charlie Kong, Xiaozhou Liao, Simon Ringer & Sophie Primig. (2020) 3D electron backscatter diffraction study of α lath morphology in additively manufactured Ti-6Al-4V. Ultramicroscopy 218, pages 113073.
Crossref
N. Haghdadi, R. DeMott, P.L. Stephenson, X.Z. Liao, S.P. Ringer & S. Primig. (2020) Five-parameter characterization of intervariant boundaries in additively manufactured Ti-6Al-4V. Materials & Design 196, pages 109177.
Crossref
Ehsan Farabi, Vahid Tari, Peter D. Hodgson, Gregory S. Rohrer & Hossein Beladi. (2020) The role of phase transformation mechanism on the grain boundary network in a commercially pure titanium. Materials Characterization 169, pages 110640.
Crossref
Shravan Kotha, Deniz Ozturk & Somnath Ghosh. (2020) Uncertainty-quantified parametrically homogenized constitutive models (UQ-PHCMs) for dual-phase α/β titanium alloys. npj Computational Materials 6:1.
Crossref
Jiang Ma, Jinsen Tian, Ming Yan, Zhuo Chen, Jun Shen & Jing Wu. (2020) Defect analysis and 2D/3D-EBSD investigation of an electron beam melted Ti-6Al-4V alloy. Materials Characterization 166, pages 110440.
Crossref
David Lunt, Alistair Ho, Alec Davis, Allan Harte, Filomeno Martina, João Quinta da Fonseca & Philip Prangnell. (2020) The effect of loading direction on strain localisation in wire arc additively manufactured Ti–6Al–4V. Materials Science and Engineering: A 788, pages 139608.
Crossref
R. Liu, X. Xia, M.Y. Xie, C. Chen, S. Wang, Z.H. Zhong, L.F. Cao & Y.C. Wu. (2020) Effect of interlayers on the tensile behaviors of tungsten multilayered composites. Journal of Alloys and Compounds 827, pages 154286.
Crossref
Lin Song, Li Wang, Tiebang Zhang, Junpin Lin & Florian Pyczak. (2020) Microstructure and phase transformations of ωo-Ti4Al3Nb based alloys after quenching and subsequent aging at intermediate temperatures. Journal of Alloys and Compounds 821, pages 153387.
Crossref
Niyanth Sridharan, Yimeng Chen, Peeyush Nandwana, Robert M. Ulfig, David J. Larson & Sudarsanam Suresh Babu. (2019) On the potential mechanisms of β to α′ + β decomposition in two phase titanium alloys during additive manufacturing: a combined transmission Kikuchi diffraction and 3D atom probe study. Journal of Materials Science 55:4, pages 1715-1726.
Crossref
M. C. M. Rodrigues, T. Garcin & M. Militzer. (2020) In-situ measurement of the β to α phase transformation kinetics in a Ti-5553 alloy using laser ultrasonics . MATEC Web of Conferences 321, pages 12013.
Crossref
Abigail K. Ackerman, Alexander J. Knowles, Hazel M. Gardner, André A. N. Németh, Ioannis Bantounas, Anna Radecka, Michael P. Moody, Paul A. J. Bagot, Roger C. Reed, David Rugg & David Dye. (2019) The Kinetics of Primary Alpha Plate Growth in Titanium Alloys. Metallurgical and Materials Transactions A 51:1, pages 131-141.
Crossref
Yan Chong, Tilak Bhattacharjee, Jangho Yi, Shiteng Zhao & Nobuhiro Tsuji. (2019) Achieving bi-lamellar microstructure with both high tensile strength and large ductility in Ti–6Al–4V alloy by novel thermomechanical processing. Materialia 8, pages 100479.
Crossref
Yan Chong, Guanyu Deng, Jangho Yi, Akinobu Shibata & Nobuhiro Tsuji. (2019) On the strain hardening abilities of α+β titanium alloys: The roles of strain partitioning and interface length density. Journal of Alloys and Compounds 811, pages 152040.
Crossref
Dorick Ballat-Durand, Salima Bouvier & Marion Risbet. (2019) Contributions of an innovative post-weld heat treatment to the micro-tensile behavior of two mono-material linear friction welded joints using: The β-metastable Ti–5Al–2Sn–2Zr–4Mo–4Cr (Ti17) and the near-α Ti–6Al–2Sn–4Zr–2Mo (Ti6242) Ti-alloys. Materials Science and Engineering: A 766, pages 138334.
Crossref
E. Onal, A.E. Medvedev, M.A. Leeflang, A. Molotnikov & A.A. Zadpoor. (2019) Novel microstructural features of selective laser melted lattice struts fabricated with single point exposure scanning. Additive Manufacturing 29, pages 100785.
Crossref
Jinhu Zhang, Xuexiong Li, Dongsheng Xu & Rui Yang. (2019) Recent progress in the simulation of microstructure evolution in titanium alloys. Progress in Natural Science: Materials International 29:3, pages 295-304.
Crossref
Wenyuan Li, Zhiyong Chen, Jianrong Liu, Shaoxiang Zhu, Guoxin Sui & Qingjiang Wang. (2019) Rolling texture and its effect on tensile property of a near-α titanium alloy Ti60 plate. Journal of Materials Science & Technology 35:5, pages 790-798.
Crossref
Huojun ZHENG, Xiaoguang FAN, Xiang ZENG & Rui ZUO. (2019) Crystal orientation and morphology of α lamellae in wrought titanium alloys: On the role of microstructure evolution in β processing. Chinese Journal of Aeronautics 32:5, pages 1305-1313.
Crossref
Punit Kumar & Upadrasta Ramamurty. (2019) Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti 6Al 4V alloy. Acta Materialia 169, pages 45-59.
Crossref
Chang Chen, Sanfeng Qian, Rui Liu, Shan Wang, Bin Liao, Zhihong Zhong, Lingfei Cao, Jan W. Coenen & Yucheng Wu. (2019) The microstructure and tensile properties of W/Ti multilayer composites prepared by spark plasma sintering. Journal of Alloys and Compounds 780, pages 116-130.
Crossref
H. Sharma, D. Parfitt, A.K. Syed, D. Wimpenny, E. Muzangaza, G. Baxter & B. Chen. (2019) A critical evaluation of the microstructural gradient along the build direction in electron beam melted Ti-6Al-4V alloy. Materials Science and Engineering: A 744, pages 182-194.
Crossref
Xiongxiong Gao, Weidong Zeng, Xin Li, Dadi Zhou, Jianwei Xu & Qingjiang Wang. (2018) Effect of boundary on the alpha phase precipitation in a near-alpha titanium alloy. Materials Letters 233, pages 298-301.
Crossref
Ke Hua, Yudong Zhang, Weimin Gan, Hongchao Kou, Jinshan Li & Claude Esling. (2018) Correlation between imposed deformation and transformation lattice strain on α variant selection in a metastable β-Ti alloy under isothermal compression. Acta Materialia 161, pages 150-160.
Crossref
Yi Chen, Hongchao Kou, Liang Cheng, Yunlong Zhang, Yun Yu, Yalin Lu & Fuxian Zhu. (2018) Experimental Evidence of Precipitation of All 12 Variants in a Single β Grain in Titanium Alloys . Advances in Materials Science and Engineering 2018, pages 1-7.
Crossref
Youping Zheng, Weidong Zeng, Dong Li, Jianwei Xu, Xiong Ma, Xiaobo Liang & Jianwei Zhang. (2018) Orthorhombic precipitate variant selection in a Ti2AlNb based alloy. Materials & Design 158, pages 46-61.
Crossref
Punit Kumar, Om Prakash & Upadrasta Ramamurty. (2018) Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V. Acta Materialia 154, pages 246-260.
Crossref
Ehsan Farabi, Peter D. Hodgson, Gregory S. Rohrer & Hossein Beladi. (2018) Five-parameter intervariant boundary characterization of martensite in commercially pure titanium. Acta Materialia 154, pages 147-160.
Crossref
Pengfei Gao, Yang Cai, Mei Zhan, Xiaoguang Fan & Zhenni Lei. (2018) Crystallographic orientation evolution during the development of tri-modal microstructure in the hot working of TA15 titanium alloy. Journal of Alloys and Compounds 741, pages 734-745.
Crossref
Lin Song, Chunqing Wang, Xiangyi Xue, Yong Xu, Tiebang Zhang & Jinshan Li. (2018) Microstructure Evolution of a Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y Alloy during Massive Transformation and Subsequent Annealing. Metals 8:2, pages 89.
Crossref
A. A. Tiamiyu, J. A. Szpunar, A. G. Odeshi, I. Oguocha & M. Eskandari. (2017) Development of Ultra-Fine-Grained Structure in AISI 321 Austenitic Stainless Steel. Metallurgical and Materials Transactions A 48:12, pages 5990-6012.
Crossref
Lin Song, Junpin Lin, Tiebang Zhang & Jinshan Li. (2017) Precipitation behavior of α2 phase in Ti–34Al–13Nb alloy. Journal of Alloys and Compounds 725, pages 155-162.
Crossref
Ke Hua, Yudong Zhang, Hongchao Kou, Jinshan Li, Weimin Gan, Jean-Jacques Fundenberger & Claude Esling. (2017) Composite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation. Acta Materialia 132, pages 307-326.
Crossref
Di Qiu, Pengyang Zhao, Rongpei Shi, Yunzhi Wang & Weijie Lu. (2016) Effect of autocatalysis on variant selection of α precipitates during phase transformation in Ti-6Al-4V alloy. Computational Materials Science 124, pages 282-289.
Crossref
Rongpei Shi, Yunzhi Wang & Dong Wang. 2016. Heat Treating of Nonferrous Alloys. Heat Treating of Nonferrous Alloys 573 603 .
D. Qiu, R. Shi, P. Zhao, D. Zhang, W. Lu & Y. Wang. (2016) Effect of low-angle grain boundaries on morphology and variant selection of grain boundary allotriomorphs and Widmanstätten side-plates. Acta Materialia 112, pages 347-360.
Crossref
Adam L. Pilchak, Dipankar Banerjee & J.C. Williams. 2016. Proceedings of the 13th World Conference on Titanium. Proceedings of the 13th World Conference on Titanium 425 430 .
Niyanth Sridharan, Anil Chaudhary, Peeyush Nandwana & Sudarsanam Suresh Babu. (2016) Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V. JOM 68:3, pages 772-777.
Crossref
R. Shi, N. Zhou, S.R. Niezgoda & Y. Wang. (2015) Microstructure and transformation texture evolution during α precipitation in polycrystalline α/β titanium alloys – A simulation study. Acta Materialia 94, pages 224-243.
Crossref
D. Qiu, R. Shi, D. Zhang, W. Lu & Y. Wang. (2015) Variant selection by dislocations during α precipitation in α/β titanium alloys. Acta Materialia 88, pages 218-231.
Crossref
Ji Zhe, Yang He & Li Hongwei. (2015) Evolution of Two Types of α Plates in Tri-modal Microstru-cture of TA15 Alloy under Varying Processing Conditions. Rare Metal Materials and Engineering 44:3, pages 527-531.
Crossref
Dang Wei, Li Jinshan, Zhang Tiebang & Kou Hongchao. (2015) High-Temperature Oxidation Behavior of Ti-22Al-27(Nb, Zr) Alloys. Rare Metal Materials and Engineering 44:2, pages 261-266.
Crossref
R. Shi, V. Dixit, H.L. Fraser & Y. Wang. (2014) Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys. Acta Materialia 75, pages 156-166.
Crossref
Z. Xu, M. Weyland & J.F. Nie. (2014) On the strain accommodation of β1 precipitates in magnesium alloy WE54. Acta Materialia 75, pages 122-133.
Crossref
Dong Wang, Rongpei Shi, Yufeng Zheng, Rajarshi Banerjee, Hamish L. Fraser & Yunzhi Wang. (2014) Integrated Computational Materials Engineering (ICME) Approach to Design of Novel Microstructures for Ti-Alloys. JOM 66:7, pages 1287-1298.
Crossref
R. Shi & Y. Wang. (2013) Variant selection during α precipitation in Ti–6Al–4V under the influence of local stress – A simulation study. Acta Materialia 61:16, pages 6006-6024.
Crossref
M. Salib, J. Teixeira, L. Germain, E. Lamielle, N. Gey & E. Aeby-Gautier. (2013) Influence of transformation temperature on microtexture formation associated with α precipitation at β grain boundaries in a β metastable titanium alloy. Acta Materialia 61:10, pages 3758-3768.
Crossref
M.M. Attallah, S. Zabeen, R.J. Cernik & M. Preuss. (2009) Comparative determination of the α/β phase fraction in α+β-titanium alloys using X-ray diffraction and electron microscopy. Materials Characterization 60:11, pages 1248-1256.
Crossref
S. Nag, R. Banerjee, R. Srinivasan, J.Y. Hwang, M. Harper & H.L. Fraser. (2009) ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloy. Acta Materialia 57:7, pages 2136-2147.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.