Advanced search
Publication Cover
Philosophical Magazine Volume 87, 2007 - Issue 36
Submit an article Journal homepage
167
Views
19
CrossRef citations to date
0
Altmetric
Original Articles

Abnormal grain growth of WC with small amount of cobalt

T. Li Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576; Singapore Institute of Manufacturing Technology (SIMTech), 71 Nanyang Drive, Singapore 639798Correspondence[email protected]
,
Q. Li Singapore Institute of Manufacturing Technology (SIMTech), 71 Nanyang Drive, Singapore 639798
,
L. Lu Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576
,
J. Y. H. Fuh Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576
&
P. C. Yu Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576; Singapore Institute of Manufacturing Technology (SIMTech), 71 Nanyang Drive, Singapore 639798
Pages 5657-5671 | Received 21 Dec 2006, Accepted 17 Sep 2007, Published online: 30 Nov 2007

Citations (19)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Victor Ioan Stanciu, Véronique Vitry & Fabienne Delaunois. (2020) Influence of the milling parameters on the sintering behaviour of WC-Co composites. Materials and Manufacturing Processes 35:7, pages 811-816.
Read now
A.K. Nanda Kumar, Masaaki Watabe & Kazuya Kurokawa. (2012) The influence of Si on the microstructure and sintering behavior of ultrafine WC. Philosophical Magazine 92:32, pages 3950-3967.
Read now
L. Zhang, S. Chen, C. Shan, X. Cheng, Y. Ma & X.-J. Xiong. (2012) Effects of cobalt additions on WC grain growth. Powder Metallurgy 55:3, pages 200-205.
Read now

Articles from other publishers (16)

Ksenia E. Smetanina, Pavel V. Andreev, Evgeny A. Lantsev, Aleksey V. Nokhrin, Artem A. Murashov, Natalia V. Isaeva, Yury V. Blagoveshchensky, Maksim S. Boldin & Vladimir N. Chuvil’deev. (2023) Nonuniform Distribution of Crystalline Phases and Grain Sizes in the Surface Layers of WC Ceramics Produced by Spark Plasma Sintering. Coatings 13:6, pages 1051.
Crossref
M.S. Mahdi & S. Sanjabi. (2022) Vacuum brazed Ni-based coating reinforced with core-shell WC@Cu/Co-P. Surface and Coatings Technology 448, pages 128920.
Crossref
T.N. Vershinina, M.D. Zarya, E.A. Korneeva, I.A. Galushka, P.B. Rimsha & M.B. Ivanov. (2022) Redistribution of elements in the main and secondary phases and its effect on the microstructure of the Mo–Fe–B cermet alloyed with Cr. Ceramics International 48:14, pages 20974-20983.
Crossref
E. A. Lantsev, N. V. Malekhonova, V. N. Chuvil’deev, A. V. Nokhrin, Yu. V. Tsvetkov, Yu. V. Blagoveshchenskiy, M. S. Boldin, P. V. Andreev, K. E. Smetanina & N. V. Isaeva. (2022) Study of High-Speed Sintering of Fine-Grained Hard Alloys Based on Tungsten Carbide with Ultralow Cobalt Content: Part I. Pure Tungsten Carbide. Inorganic Materials: Applied Research 13:3, pages 761-774.
Crossref
Igor L. ShabalinIgor L. Shabalin. 2022. Ultra-High Temperature Materials IV. Ultra-High Temperature Materials IV 11 829 .
E.A. Lantsev, N.V. Malekhonova, A.V. Nokhrin, V.N. Chuvil’deev, M.S. Boldin, P.V. Andreev, K.E. Smetanina, YuV. Blagoveshchenskiy, N.V. Isaeva & A.A. Murashov. (2021) Spark plasma sintering of fine-grained WC hard alloys with ultra-low cobalt content. Journal of Alloys and Compounds 857, pages 157535.
Crossref
Kolan Madhav Reddy, Xinshu Zou, Yixuan Hu, Haibo Zhang, Tata Narasinga Rao & Joydip Joardar. (2021) Influence of heating rate on formation of nanostructured tungsten carbides during thermo-chemical processing. Advanced Powder Technology 32:1, pages 121-130.
Crossref
Xiaonan Wang, Dongran Zhou & Peiquan Xu. (2019) The WC-Co/Fe–Ni interface: Effect of holding time on the microstructure, grain size and grain growth mechanism. Ceramics International 45:17, pages 23320-23327.
Crossref
J.P. Cardoso, J. Puga, A.M. Ferro Rocha, C.M. Fernandes & A.M.R. Senos. (2019) WC – (Cu: AISI304) composites processed from high energy ball milled powders. International Journal of Refractory Metals and Hard Materials 84, pages 104990.
Crossref
A. Salimi & S. Sanjabi. (2019) Influence of Cu shell on the anomalous WC grain growth in Ni-base brazed cladding. Surface and Coatings Technology 360, pages 335-346.
Crossref
I V Osetkovsky, N A Kozyrev, R E Kryukov, A A Usoltsev & A I Gusev. (2017) Development of a wear-resistant flux cored wire of Fe-C-Si-Mn-Cr-Ni-Mo-V system for deposit welding of mining equipment parts. IOP Conference Series: Earth and Environmental Science 84, pages 012017.
Crossref
Dong-Yeol Yang, Duk Yong Yoon & Suk-Joong L. Kang. (2012) Abnormal grain growth enhanced densification of liquid phase-sintered WC–Co in support of the pore filling theory. Journal of Materials Science 47:20, pages 7056-7063.
Crossref
Akihiro Nino, Yoshinao Nakaibayashi, Shigeaki Sugiyama & Hitoshi Taimatsu. (2011) Microstructure and Mechanical Properties of WC-SiC Composites. MATERIALS TRANSACTIONS 52:8, pages 1641-1645.
Crossref
Nicholas R. Denny, Fan Li, David J. Norris & Andreas Stein. (2010) In situ high temperature TEM analysis of sintering in nanostructured tungsten and tungsten–molybdenum alloy photonic crystals. J. Mater. Chem. 20:8, pages 1538-1545.
Crossref
Jinfeng Zhao, Troy Holland, Cosan Unuvar & Zuhair A. Munir. (2009) Sparking plasma sintering of nanometric tungsten carbide. International Journal of Refractory Metals and Hard Materials 27:1, pages 130-139.
Crossref
Tao Li, Qingfa Li, J.Y.H. Fuh, Poh Ching Yu & L. Lu. (2009) Two-material powder injection molding of functionally graded WC–Co components. International Journal of Refractory Metals and Hard Materials 27:1, pages 95-100.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.