Advanced search
Publication Cover
Philosophical Magazine Volume 92, 2012 - Issue 4
Submit an article Journal homepage
1,060
Views
57
CrossRef citations to date
0
Altmetric
Part A: Materials Science

A model of grain refinement and strengthening of Al alloys due to cold severe plastic deformation

Xiao Guang Qiao Materials Research Group, School of Engineering Sciences, University of Southampton, Southampton SO171BJ, UK
,
Nong Gao Materials Research Group, School of Engineering Sciences, University of Southampton, Southampton SO171BJ, UK
&
Marco J. Starink Materials Research Group, School of Engineering Sciences, University of Southampton, Southampton SO171BJ, UKCorrespondence[email protected]
Pages 446-470 | Received 23 Feb 2011, Accepted 19 Aug 2011, Published online: 24 Oct 2011

Citations (57)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

Wanfu Guo, Youping Yi, Shiquan Huang, Xianchang Mao, Jie Fang, Dengliang Tong & Yameng Luan. (2020) Manufacturing large 2219 Al–Cu alloy rings by a cold rolling process. Materials and Manufacturing Processes 35:3, pages 291-302.
Read now
M. Pourbashiri, C. Poletti, M. Sedighi & C. Sommitsch. (2020) Strengthening mechanisms of Al wires processed by equal channel angular torsion drawing. Materials Science and Technology 36:1, pages 65-82.
Read now
Jin Su, Zhong-bin Tang, Cun-xian Wang, Tian Ye, Tao Suo & Yu-long Li. (2017) Compressive behavior and deformation kinetics of ultrafine grained aluminum processed by equal channel angular pressing. International Journal of Smart and Nano Materials 8:1, pages 56-77.
Read now
Hailiang Yu, A. Kiet Tieu, Cheng Lu & Charlie Kong. (2014) Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days. Philosophical Magazine Letters 94:11, pages 732-740.
Read now

Articles from other publishers (53)

Sayed M. Amer, Maria V. Glavatskikh, Ruslan Yu. Barkov, Alexander Yu. Churyumov, Irina S. Loginova, Maxim G. Khomutov & Andrey V. Pozdniakov. (2023) Comprehensive Analysis of Microstructure and Hot Deformation Behavior of Al-Cu-Y-Mg-Cr-Zr-Ti-Fe-Si Alloy. Metals 13:11, pages 1853.
Crossref
Selman Çeti̇ntürk, Necmettin Tarakçioğlu, Mustafa Acarer, Mehmet Çunkaş & Emin Salur. (2023) Using quadratic multiple linear regression models to investigate the effect of inoculant type and T6 heat treatment on microstructural, mechanical and corrosion properties of Al-Cu alloy produced by casting. Materials Today Communications 35, pages 105549.
Crossref
Aditya Prakash, Tawqeer Nasir Tak, Abu Anand, Namit N. Pai, S. V. S. Narayana Murty, Chandra Veer Singh, P. J. Guruprasad & Indradev Samajdar. (2022) Mechanistic Origin of Orientation-Dependent Substructure Evolution in Aluminum and Aluminum-Magnesium Alloys. Metallurgical and Materials Transactions A 53:7, pages 2689-2707.
Crossref
Mingyang Zhang, Chunming Wang, Gaoyang Mi, Ping Jiang & Xiong Zhang. (2022) In-situ formation Ti-Al-C compounds reinforced SiCp/2A14 Al joint: Microstructure evolution and mechanical properties. Optics & Laser Technology 150, pages 107896.
Crossref
Jiahui Dong, Nong Gao, Ying Chen, Lingfei Cao, Hui Song, Hannes Fröck, Benjamin Milkereit & Marco J. Starink. (2022) Achieving ultra-high strength of Al-Cu-Li alloys by the combination of high pressure torsion and age-hardening. Materials Science and Engineering: A 832, pages 142504.
Crossref
Farid Biniyazan & Hamid Soleimanimehr. (2021) Improving both Strength and Ductility of Al-7075 by combining Dual Equal Channel Lateral Extrusion with Aging Heat Treatment. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 45:3, pages 727-739.
Crossref
Chunquan Liu, Xianhua Chen, Yuan Yuan, Wei Zhang, Yusheng Zhang & Fusheng Pan. (2021) Altered age-hardening behavior in the ultrafine-grained surface layer of Mg-Zn-Y-Ce-Zr alloy processed by sliding friction treatment. Journal of Materials Science & Technology 78, pages 20-29.
Crossref
Naveen Manhar Chavan, P. Sudharshan Phani, M. Ramakrishna, L. Venkatesh, Prita Pant & G. Sundararajan. (2021) Role of stacking fault energy (SFE) on the high strain rate deformation of cold sprayed Cu and Cu–Al alloy coatings. Materials Science and Engineering: A 814, pages 141242.
Crossref
Matthew R. Standley & Marko Knezevic. (2021) Towards Manufacturing of Ultrafine-Laminated Structures in Metallic Tubes by Accumulative Extrusion Bonding. Metals 11:3, pages 389.
Crossref
Mohan Bodkhe, Sanjeev Sharma, Abdel-Hamid I. Mourad & Pritam Babu Sharma. (2021) An overview of the microstructure and mechanical properties of copper tube by SPD process. Materials Today: Proceedings 46, pages 4289-4294.
Crossref
Wanfu Guo, Hailin He, Youping Yi, Shiquan Huang, Xianchang Mao, Jie Fang & Jianwu Huang. (2020) Effects of axial cold-compression on microstructure uniformity and mechanical property enhancement of large 2219 Al–Cu alloy rings. Materials Science and Engineering: A 798, pages 140233.
Crossref
Rohan Chakrabarty & Jun Song. (2020) A modified Johnson-Cook material model with strain gradient plasticity consideration for numerical simulation of cold spray process. Surface and Coatings Technology 397, pages 125981.
Crossref
Frank Czerwinski. (2020) Thermal Stability of Aluminum Alloys. Materials 13:15, pages 3441.
Crossref
Fei Guo, Lei Liu, Yanlong Ma, Luyao Jiang, Dingfei Zhang & Fusheng Pan. (2020) Mechanism of phase refinement and its effect on mechanical properties of a severely deformed dual-phase Mg–Li alloy during annealing. Materials Science and Engineering: A 772, pages 138792.
Crossref
Shahir Mohd Yusuf, Ying Chen, Shoufeng Yang & Nong Gao. (2020) Microstructural evolution and strengthening of selective laser melted 316L stainless steel processed by high-pressure torsion. Materials Characterization 159, pages 110012.
Crossref
Tian Liu, William A. Story & Luke N. Brewer. (2019) Effect of Heat Treatment on the Al-Cu Feedstock Powders for Cold Spray Deposition. Metallurgical and Materials Transactions A 50:7, pages 3373-3387.
Crossref
Uchechi Okeke, Hakan Yilmazer, Shigeo Sato & Carl J. Boehlert. (2019) Strength enhancement of an aluminum alloy through high pressure torsion. Materials Science and Engineering: A 760, pages 195-205.
Crossref
Wenbin Zhou, Junquan Yu, Jianguo Lin & Trevor A. Dean. (2019) Manufacturing a curved profile with fine grains and high strength by differential velocity sideways extrusion. International Journal of Machine Tools and Manufacture 140, pages 77-88.
Crossref
N.S. Anas, M. Ramakrishna, R.K. Dash, Tata N. Rao & R. Vijay. (2019) Influence of process control agents on microstructure and mechanical properties of Al alloy produced by mechanical alloying. Materials Science and Engineering: A 751, pages 171-182.
Crossref
M. Sarkari Khorrami, N. Saito, Y. Miyashita & M. Kondo. (2019) Texture variations and mechanical properties of aluminum during severe plastic deformation and friction stir processing with SiC nanoparticles. Materials Science and Engineering: A 744, pages 349-364.
Crossref
T. Camalet, A. Rusinek, R. Bernier, M. Karon, R. Massion, G. Z. VoyiadjisM. Adamiak. (2018) Effect of Severe Plastic Deformation by 120 deg ECAP or Shock Impact on 6061 Aluminum Alloy at High Strain Rates. Journal of Engineering Materials and Technology 140:4.
Crossref
C.L. Li, Q.S. Mei, J.Y. Li, F. Chen, Y. Ma & X.M. Mei. (2018) Hall-Petch relations and strengthening of Al-ZnO composites in view of grain size relative to interparticle spacing. Scripta Materialia 153, pages 27-30.
Crossref
Ke-Min Xue, Mei Liu, Si-Liang Yan, Zhe Wang, Ya-Ling Hua & Ping Li. (2018) Synergic Improvement of Plasticity and Strength of Al-Zn-Mg-Cu Alloy by Grain Refinement and Precipitates Redistribution using Cyclic Extrusion Compression. Advanced Engineering Materials 20:8, pages 1800140.
Crossref
S.H. Wu, P. Zhang, D. Shao, P.M. Cheng, J. Kuang, K. Wu, J.Y. Zhang, G. Liu & J. Sun. (2018) Grain size-dependent Sc microalloying effect on the yield strength-pitting corrosion correlation in Al-Cu alloys. Materials Science and Engineering: A 721, pages 200-214.
Crossref
Fang-yuan Zhang, Chun-zheng Duan, Min-jie Wang & Wei Sun. (2018) White and dark layer formation mechanism in hard cutting of AISI52100 steel. Journal of Manufacturing Processes 32, pages 878-887.
Crossref
Andrea M. Kliauga, Vitor L. Sordi, Natalia S. De Vincentis, Raúl E. Bolmaro, Norbert Schell & Heinz-Günter Brokmeier. (2018) Severe Plastic Deformation by Equal Channel Angular Pressing and Rolling: The Influence of the Deformation Path on Strain Distribution. Advanced Engineering Materials 20:4, pages 1700055.
Crossref
T. Khelfa, M. A. Rekik, J. A. Muñoz-Bolaños, J. M. Cabrera-Marrero & M. Khitouni. (2017) Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP). The International Journal of Advanced Manufacturing Technology 95:1-4, pages 1165-1177.
Crossref
Kang Zhang, J.Q. Chen, P.Z. Ma & X.H. Zhang. (2018) Effect of welding thermal cycle on microstructural evolution of Al–Zn–Mg–Cu alloy. Materials Science and Engineering: A 717, pages 85-94.
Crossref
R.N. Harsha, V. Mithun Kulkarni & B. Satish Babu. (2018) Severe Plastic Deformation - A Review. Materials Today: Proceedings 5:10, pages 22340-22349.
Crossref
M.J. Starink. (2017) Dislocation versus grain boundary strengthening in SPD processed metals: Non-causal relation between grain size and strength of deformed polycrystals. Materials Science and Engineering: A 705, pages 42-45.
Crossref
Nan Hu, Nong Gao, Ying Chen & Marco J. Starink. (2016) Achieving homogeneous anodic TiO2 nanotube layers through grain refinement of the titanium substrate. Materials & Design 110, pages 346-353.
Crossref
Nan Hu, Nong Gao & Marco J. Starink. (2016) The influence of surface roughness and high pressure torsion on the growth of anodic titania nanotubes on pure titanium. Applied Surface Science 387, pages 1010-1020.
Crossref
Ying Chen, Nong Gao, Gang Sha, Simon P. Ringer & Marco J. Starink. (2016) Microstructural evolution, strengthening and thermal stability of an ultrafine-grained Al–Cu–Mg alloy. Acta Materialia 109, pages 202-212.
Crossref
M.B. Uday, M.N. Ahmad-Fauzi, Alias Mohd Noor & Srithar Rajoo. (2015) An insight into microstructural evolution during plastic deformation in AA6061 alloy after friction welding with alumina-YSZ composite. Mechanics of Materials 91, pages 50-63.
Crossref
M.C.V. Vega, R.E. Bolmaro, M. Ferrante, V.L. Sordi & A.M. Kliauga. (2015) The influence of deformation path on strain characteristics of AA1050 aluminium processed by equal-channel angular pressing followed by rolling. Materials Science and Engineering: A 646, pages 154-162.
Crossref
M.R. Akbarpour, M. Farvizi, D.J. Lee, H. Rezaei & H.S. Kim. (2015) Effect of high-pressure torsion on the microstructure and strengthening mechanisms of hot-consolidated Cu?CNT nanocomposite. Materials Science and Engineering: A 638, pages 289-295.
Crossref
Hailiang Yu, A. Kiet Tieu, Cheng Lu, Xiong Liu, Mao Liu, Ajit Godbole, Charlie Kong & Qinghua Qin. (2015) A new insight into ductile fracture of ultrafine-grained Al-Mg alloys. Scientific Reports 5:1.
Crossref
Fumio Ogawa & Chitoshi Masuda. (2015) Microstructure evolution during fabrication and microstructure–property relationships in vapour-grown carbon nanofibre-reinforced aluminium matrix composites fabricated via powder metallurgy. Composites Part A: Applied Science and Manufacturing 71, pages 84-94.
Crossref
Ying Chen, Nong Gao, Gang Sha, Simon P. Ringer & Marco J. Starink. (2015) Strengthening of an Al–Cu–Mg alloy processed by high-pressure torsion due to clusters, defects and defect–cluster complexes. Materials Science and Engineering: A 627, pages 10-20.
Crossref
P. Rodr?guez-Calvillo, N. Ferrer & J.M. Cabrera. (2015) Analysis of microstructure and strengthening in CuMg alloys deformed by equal channel angular pressing. Journal of Alloys and Compounds 626, pages 340-348.
Crossref
Ferdinand Dobeš, Petr Dymáček & Michal Besterci. (2015) Estimation of the mechanical properties of aluminium and an aluminium composite after equal channel angular pressing by means of the small punch test. Materials Science and Engineering: A 626, pages 313-321.
Crossref
Hailiang Yu, Kiet Tieu, Syamsul Hadi, Cheng Lu, Ajit Godbole & Charlie Kong. (2014) High Strength and Ductility of Ultrathin Laminate Foils Using Accumulative Roll Bonding and Asymmetric Rolling. Metallurgical and Materials Transactions A 46:2, pages 869-879.
Crossref
Y.Z. Du, X.G. Qiao, M.Y. Zheng, K. Wu & S.W. Xu. (2015) The microstructure, texture and mechanical properties of extruded Mg–5.3Zn–0.2Ca–0.5Ce (wt%) alloy. Materials Science and Engineering: A 620, pages 164-171.
Crossref
Xiao Guang Qiao, Ya Wei Zhao, Wei Min Gan, Ying Chen, Ming Yi Zheng, Kun Wu, Nong Gao & Marco J. Starink. (2014) Hardening mechanism of commercially pure Mg processed by high pressure torsion at room temperature. Materials Science and Engineering: A 619, pages 95-106.
Crossref
H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, J. Hieda, S. Sato & Y. Todaka. (2014) Microstructural evolution of precipitation-hardened β-type titanium alloy through high-pressure torsion. Acta Materialia 80, pages 172-182.
Crossref
Pragna Bhaskar, Arup Dasgupta, V. Subramanya Sarma, U. Kamachi Mudali & S. Saroja. (2014) Mechanical properties and corrosion behaviour of nanocrystalline Ti–5Ta–1.8Nb alloy produced by cryo-rolling. Materials Science and Engineering: A 616, pages 71-77.
Crossref
Zhong-bin TANG, Tao SUO, Bu-sheng ZHANG, Yu-long LI, Feng ZHAO & Xue-ling FAN. (2014) Uniaxial compressive behavior of equal channel angular pressing Al at wide temperature and strain rate range. Transactions of Nonferrous Metals Society of China 24:8, pages 2447-2452.
Crossref
Hamed Asgharzadeh, Soo-Hyun Joo & Hyoung Seop Kim. (2014) Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-Pressure Torsion. Metallurgical and Materials Transactions A 45:9, pages 4129-4137.
Crossref
S. Subbarayan, H. J. Roven, Y. J. Chen & P. C. Skaret. (2013) Microstructure evolution in pure aluminium processed by equal channel angular pressing at elevated temperature. International Journal of Materials Research 104:7, pages 630-636.
Crossref
Chengpeng Wang, Fuguo Li, Lei Wei, Yajing Yang & Junzhe Dong. (2013) Experimental microindentation of pure copper subjected to severe plastic deformation by combined tension–torsion. Materials Science and Engineering: A 571, pages 95-102.
Crossref
Tao Suo, Yuzeng Chen, Yulong Li, Cunxian Wang & Xueling Fan. (2013) Strain rate sensitivity and deformation kinetics of ECAPed aluminium over a wide range of strain rates. Materials Science and Engineering: A 560, pages 545-551.
Crossref
Marco J. Starink, Xiaoyu Cheng & Shoufeng Yang. (2013) Hardening of pure metals by high-pressure torsion: A physically based model employing volume-averaged defect evolutions. Acta Materialia 61:1, pages 183-192.
Crossref
K.S. Ghosh, N. Gao & M.J. Starink. (2012) Characterisation of high pressure torsion processed 7150 Al–Zn–Mg–Cu alloy. Materials Science and Engineering: A 552, pages 164-171.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.