Advanced search
Publication Cover
Philosophical Magazine Volume 93, 2013 - Issue 23
Submit an article Journal homepage
765
Views
44
CrossRef citations to date
0
Altmetric
Part A: Materials Science

Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium

Chuanshi Hong Danish-Chinese Center for Nanometals, Section for Materials Science and Advanced Characterization, Department of Wind Energy, Technical University of Denmark, Risø Campus, Roskilde, DK-4000, DenmarkCorrespondence[email protected]
,
Xiaoxu Huang Danish-Chinese Center for Nanometals, Section for Materials Science and Advanced Characterization, Department of Wind Energy, Technical University of Denmark, Risø Campus, Roskilde, DK-4000, Denmark
&
Grethe Winther Department of Mechanical Engineering, Technical University of Denmark, DK-2800, Kgs. Lyngby, Denmark
Pages 3118-3141 | Received 15 Dec 2012, Accepted 01 May 2013, Published online: 14 Jun 2013

Citations (44)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

Dingcong Cui, Yashan Zhang, Feng He, Jiankai Ma, Kaiwei Zhang, Zhongsheng Yang, Junjie Li, Zhijun Wang, Ji-jung Kai, Jincheng Wang & Feng Jun. (2021) Heterogeneous microstructure of the bonding zone and its dependence on preheating in hybrid manufactured Ti-6Al-4V. Materials Research Letters 9:10, pages 422-428.
Read now
N. Haghdadi, P. Cizek, H. Beladi & P. D. Hodgson. (2017) The austenite microstructure evolution in a duplex stainless steel subjected to hot deformation. Philosophical Magazine 97:15, pages 1209-1237.
Read now
J. Kratochvíl & M. Kružík. (2015) A crystal plasticity model of a formation of a deformation band structure. Philosophical Magazine 95:32, pages 3621-3639.
Read now
G. Winther, C.S. Hong & X. Huang. (2015) Low-Energy Dislocation Structure (LEDS) character of dislocation boundaries aligned with slip planes in rolled aluminium. Philosophical Magazine 95:13, pages 1471-1489.
Read now

Articles from other publishers (40)

Mateusz Kopec, Xiaochuan Liu, Dominika Gorniewicz, Patryk Modrzejewski, Dariusz Zasada, Stanisław Jóźwiak, Jacek Janiszewski & Zbigniew L. Kowalewski. (2024) Mechanical response of 6061-T6 aluminium alloy subjected to dynamic testing at low temperature: Experiment and modelling. International Journal of Impact Engineering 185, pages 104843.
Crossref
Liangyun Lan, Yiting Zhang, Yifeng Fu, You Guo & Quanqiang Shi. (2023) Effect of strain inhomogeneity on flow behavior, dynamic recrystallization and substructure evolution of a 904 L super austenitic stainless steel. Materials Today Communications 37, pages 107140.
Crossref
Xiaoxue Qin, Yejun Gu, Luchan Zhang & Yang Xiang. (2022) Continuum Model and Numerical Method for Dislocation Structure and Energy of Grain Boundaries. Multiscale Modeling & Simulation 20:1, pages 323-348.
Crossref
Kyle Starkey, Thomas Hochrainer & Anter El-Azab. (2022) Development of mean-field continuum dislocation kinematics with junction reactions using de Rham currents and graph theory. Journal of the Mechanics and Physics of Solids 158, pages 104685.
Crossref
Chuanshi Hong, Yubin Zhang, Adam Lindkvist, Wenjun Liu, Jon Tischler, Ruqing Xu & Dorte Juul Jensen. (2021) Recrystallization boundary migration in the 3D heterogeneous microstructure near a hardness indent. Scripta Materialia 205, pages 114187.
Crossref
F. Z. Xia, H. B. Sun & H. G. Wei. (2021) Rolling Textures in BCC Metals: A Biaxial Stress Texture Theory and Experiments. Physics of Metals and Metallography 122:7, pages 710-717.
Crossref
Hongjiang Pan, Yue He & Xiaodan Zhang. (2021) Interactions between Dislocations and Boundaries during Deformation. Materials 14:4, pages 1012.
Crossref
Nicolas BertinRyan B. SillsWei Cai. (2020) Frontiers in the Simulation of Dislocations. Annual Review of Materials Research 50:1, pages 437-464.
Crossref
Kyle Starkey, Grethe Winther & Anter El-Azab. (2020) Theoretical development of continuum dislocation dynamics for finite-deformation crystal plasticity at the mesoscale. Journal of the Mechanics and Physics of Solids 139, pages 103926.
Crossref
Zongqiang Feng, Rui Fu, Chengwei Lin, Guilin Wu, Tianlin Huang, Ling Zhang & Xiaoxu Huang. (2020) TEM-based dislocation tomography: Challenges and opportunities. Current Opinion in Solid State and Materials Science 24:3, pages 100833.
Crossref
Stefanos Papanikolaou & Giacomo Po. (2020) -Invariant and Topological Pathways to Influence the Strength of Submicron Crystals . Physical Review Letters 124:20.
Crossref
Qi Zhao, Zhiyi Liu, Yangcheng Hu, Shasha Li & Song Bai. (2020) Evolution of Goss texture in an Al–Cu–Mg alloy during cold rolling. Archives of Civil and Mechanical Engineering 20:1.
Crossref
Bizheng Wang, Bei Tang, Chao You, Yingchun Wan, Yonghao Gao, Zhiyong Chen, Liwei Lu, Chuming Liu & Jian Wang. (2020) Dislocation arrays, precipitate bands and free zones in forged Mg-Gd-Y-Zr alloy. Materials Science and Engineering: A 775, pages 138789.
Crossref
Zongqiang Feng, Xuan Luo, Yanxia Chen, Nan Chen, Ling Zhang, Guilin Wu & Xiaoxu Huang. (2020) Effects of precipitates versus solute atoms on the deformation-induced grain refinement in an Al–Cu–Mg alloy. Materials Science and Engineering: A 771, pages 138486.
Crossref
Nicolai Ytterdal Juul, Jette Oddershede & Grethe Winther. (2019) Analysis of Grain-Resolved Data from Three-Dimensional X-Ray Diffraction Microscopy in the Elastic and Plastic Regimes. JOM 72:1, pages 83-90.
Crossref
M.R. Delfani & F. Kakavand. (2019) Frank network of dislocations within Mindlin’s second strain gradient theory of elasticity. International Journal of Mechanical Sciences 164, pages 105150.
Crossref
Chuanshi Hong. (2019) Visualization of low-misorientation dislocation structures from orientation data using customized All-Euler maps. IOP Conference Series: Materials Science and Engineering 580:1, pages 012033.
Crossref
Bryan Kuhr & Diana Farkas. (2019) Dislocation content in random high angle grain boundaries. Modelling and Simulation in Materials Science and Engineering 27:4, pages 045005.
Crossref
A. Vattré, N. Abdolrahim, S.S. Navale & M.J. Demkowicz. (2019) The relaxed structure of intrinsic dislocation networks in semicoherent interfaces: predictions from anisotropic elasticity theory and comparison with atomistic simulations. Extreme Mechanics Letters 28, pages 50-57.
Crossref
S.A. El-Naaman, K.L. Nielsen & C.F. Niordson. (2019) An investigation of back stress formulations under cyclic loading. Mechanics of Materials 130, pages 76-87.
Crossref
Zongqiang Feng, Xuan Luo, Yanxia Chen, Nan Chen & Guilin Wu. (2019) Surface severe plastic deformation induced solute and precipitate redistribution in an Al-Cu-Mg alloy. Journal of Alloys and Compounds 773, pages 585-596.
Crossref
Ryan B. Sills, Nicolas Bertin, Amin Aghaei & Wei Cai. (2018) Dislocation Networks and the Microstructural Origin of Strain Hardening. Physical Review Letters 121:8.
Crossref
D.A. Hughes & N. Hansen. (2018) The microstructural origin of work hardening stages. Acta Materialia 148, pages 374-383.
Crossref
Nicolai Ytterdal Juul, Jette Oddershede, Armand Beaudoin, Kamalika Chatterjee, Margaret K.A. Koker, Darren Dale, Paul Shade & Grethe Winther. (2017) Measured resolved shear stresses and Bishop-Hill stress states in individual grains of austenitic stainless steel. Acta Materialia 141, pages 388-404.
Crossref
Yanxia Chen, Yanqing Yang, Zongqiang Feng, Bin Huang, Xian Luo & Wei Zhang. (2017) The depth-dependent gradient deformation bands in a sliding friction treated Al-Zn-Mg-Cu alloy. Materials Characterization 132, pages 269-279.
Crossref
N. Haghdadi, P. Cizek, H. Beladi & P. D. Hodgson. (2017) Dynamic Restoration Processes in a 23Cr-6Ni-3Mo Duplex Stainless Steel: Effect of Austenite Morphology and Interface Characteristics. Metallurgical and Materials Transactions A 48:10, pages 4803-4820.
Crossref
Chuanshi Hong, Søren Fæster, Niels Hansen, Xiaoxu Huang & Rozaliya I. Barabash. (2017) Non-spherical voids and lattice reorientation patterning in a shock-loaded Al single crystal. Acta Materialia 134, pages 16-30.
Crossref
Wenyuan Li, Zhiyong Chen, Jianrong Liu, Qingjiang Wang & Guoxin Sui. (2017) Effect of texture on anisotropy at 600 °C in a near-α titanium alloy Ti60 plate. Materials Science and Engineering: A 688, pages 322-329.
Crossref
Luchan Zhang, Yejun Gu & Yang Xiang. (2017) Energy of low angle grain boundaries based on continuum dislocation structure. Acta Materialia 126, pages 11-24.
Crossref
Grethe Winther, Jonathan P. Wright, Søren Schmidt & Jette Oddershede. (2017) Grain interaction mechanisms leading to intragranular orientation spread in tensile deformed bulk grains of interstitial-free steel. International Journal of Plasticity 88, pages 108-125.
Crossref
C. Chen, S. Wang, Y.L. Jia, M.P. Wang, Z. Li, Z.H. Zhong, P. Lu, Y.C. Wu & L.F. Cao. (2016) The evolution of dislocation microstructure in electron beam melted Ta-2.5W alloy during cold rolling. International Journal of Refractory Metals and Hard Materials 61, pages 136-146.
Crossref
Debasis Poddar, Pavel Cizek, Hossein Beladi & Peter D. Hodgson. (2016) Microstructure characteristics of the 〈111〉 oriented grains in a Fe-30Ni-Nb model austenitic steel deformed in hot uniaxial compression. Materials Characterization 118, pages 382-396.
Crossref
S.A. El-Naaman, K.L. Nielsen & C.F. Niordson. (2016) On modeling micro-structural evolution using a higher order strain gradient continuum theory. International Journal of Plasticity 76, pages 285-298.
Crossref
Debasis Poddar, Pavel Cizek, Hossein Beladi & Peter D. Hodgson. (2015) Orientation Dependence of the Deformation Microstructure in a Fe-30Ni-Nb Model Austenitic Steel Subjected to Hot Uniaxial Compression. Metallurgical and Materials Transactions A 46:12, pages 5933-5951.
Crossref
H. Liu, Y. Gao, Z. Xu, Y.M. Zhu, Y. Wang & J.F. Nie. (2015) Guided Self-Assembly of Nano-Precipitates into Mesocrystals. Scientific Reports 5:1.
Crossref
Debasis Poddar, Pavel Cizek, Hossein Beladi & Peter D. Hodgson. (2015) The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe–30Ni–Nb model austenitic steel. Acta Materialia 99, pages 347-362.
Crossref
Shan Wang, Chang Chen, Yanlin Jia & Mingpu Wang. (2015) Evolution of texture and deformation microstructure in Ta–2.5W alloy during cold rolling. Journal of Materials Research 30:18, pages 2792-2803.
Crossref
Y B Zhang & D Juul Jensen. (2015) Boundary migration during recrystallization: experimental observations. IOP Conference Series: Materials Science and Engineering 89, pages 012015.
Crossref
J. Oddershede, J.P. Wright, A. Beaudoin & G. Winther. (2015) Deformation-induced orientation spread in individual bulk grains of an interstitial-free steel. Acta Materialia 85, pages 301-313.
Crossref
N. Hansen & C.Y. Barlow. 2014. Physical Metallurgy. Physical Metallurgy 1681 1764 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.