Advanced search
Publication Cover
Journal of Macromolecular Science, Part C
Polymer Reviews
Volume 45, 2005 - Issue 4
Journal homepage
9,707
Views
343
CrossRef citations to date
0
Altmetric
Original Articles

Synthesis of Poly(Lactic Acid): A Review

Rajeev Mehta Department of Chemical Engineering, Thapar Institute of Engineering and Technology, Patiala, Punjab, India
,
Vineet Kumar Department of Chemical Engineering, Thapar Institute of Engineering and Technology, Patiala, Punjab, India
,
Haripada Bhunia Department of Chemical Engineering, Thapar Institute of Engineering and Technology, Patiala, Punjab, India
&
S. N. Upadhyay Department of Chemical Engineering and Technology, Institute of Technology, Banaras Hindu University, Varanasi, IndiaCorrespondence[email protected]
Pages 325-349 | Received 20 May 2005, Accepted 01 Aug 2005, Published online: 21 Aug 2006

Citations (343)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (20)

Farnoosh Ebrahimi & Hossein Ramezani Dana. (2022) Poly lactic acid (PLA) polymers: from properties to biomedical applications. International Journal of Polymeric Materials and Polymeric Biomaterials 71:15, pages 1117-1130.
Read now
Kehinde Olonisakin, Mizi fan, Zhang Xin-Xiang, Li Ran, WenSheng Lin, Weifeng Zhang & Yang Wenbin. (2022) Key Improvements in Interfacial Adhesion and Dispersion of Fibers/Fillers in Polymer Matrix Composites; Focus on PLA Matrix Composites. Composite Interfaces 29:10, pages 1071-1120.
Read now
Maria Laura Di Lorenzo. (2021) Poly(l-Lactic Acid)/Poly(Butylene Succinate) Biobased Biodegradable Blends. Polymer Reviews 61:3, pages 457-492.
Read now
Dong-Hun Han, Myeon-Cheon Choi, Saravanan Nagappan, Young-Min Kim & Han-Seong Kim. (2020) Ethylene vinyl acetate (EVA)/poly(lactic acid) (PLA) blends and their foams. Molecular Crystals and Liquid Crystals 707:1, pages 38-45.
Read now
Raina Aman Qazi, Mohammad Saleem Khan, Luqman Ali Shah, Rizwan Ullah, Ayesha Kausar & Rozina Khattak. (2020) Eco-friendly electronics, based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review. Polymer-Plastics Technology and Materials 59:9, pages 928-951.
Read now
Sangeeta Metkar, Vivek Sathe, Imran Rahman, Bhaskar Idage & Susheela Idage. (2019) Ring opening polymerization of lactide: kinetics and modeling. Chemical Engineering Communications 206:9, pages 1159-1167.
Read now
Mohammad Reza Ketabchi, Mohammad Khalid, Chantara Thevy Ratnam, Feven Mattews Michael & Rashmi Walvekar. (2019) Investigating the effects of processing parameters on poly(lactic acid) properties – a central composite design approach. Plastics, Rubber and Composites 48:3, pages 95-102.
Read now
Clement Matthew Chan, Luigi-Jules Vandi, Steven Pratt, Peter Halley, Desmond Richardson, Alan Werker & Bronwyn Laycock. (2018) Composites of Wood and Biodegradable Thermoplastics: A Review. Polymer Reviews 58:3, pages 444-494.
Read now
Sheetal Monga, Anupama Kaushik & Bhuvanesh Gupta. (2016) Optimization of Process Parameters for Controlled Ring-Opening Polymerization of Lactide to Produce Poly(L-Lactide) Diols as Precursor for Polyurethanes. Polymer-Plastics Technology and Engineering 55:17, pages 1819-1830.
Read now
Sung-Wook Lim, Myeon-Cheon Choi, Jae-Hoon Jeong, Eun-Young Park & Chang-Sik Ha. (2016) Toughening poly(lactic acid) (PLA) through in situ reactive blending with liquid polybutadiene rubber (LPB). Composite Interfaces 23:8, pages 807-818.
Read now
Z. X. Teo & W. S. Chow. (2016) Impact, Thermal, and Morphological Properties of Poly(Lactic Acid)/Poly(Methyl Methacrylate)/Halloysite Nanotube Nanocomposites. Polymer-Plastics Technology and Engineering 55:14, pages 1474-1480.
Read now
Mohamed Eldessouki, Gisela Buschle-Diller & Yasser Gowayed. (2016) Solution-based synthesis of a four-arm star-shaped poly(L-lactide). Designed Monomers and Polymers 19:2, pages 180-192.
Read now
İhsan Başaran & Ayhan Oral. (2015) Preparation of Poly(lactic acid) Nanocomposite via Catalyst-Modified Montmorillonite. Polymer-Plastics Technology and Engineering 54:14, pages 1505-1512.
Read now
Seyed Mohammad Davachi & Babak Kaffashi. (2015) Polylactic Acid in Medicine. Polymer-Plastics Technology and Engineering 54:9, pages 944-967.
Read now
C. K. S. Pillai. (2014) Recent advances in biodegradable polymeric materials. Materials Science and Technology 30:5, pages 558-566.
Read now
Tsuyoshi Michinobu, Masami Bito, Miki Tanimura, Yoshihiro Katayama, Eiji Masai, Masaya Nakamura, Yuichiro Otsuka, Seiji Ohara & Kiyotaka Shigehara. (2010) Synthesis and Characterization of Hybrid Biopolymers of L-lactic Acid and 2-Pyrone-4,6-dicarboxylic Acid. Journal of Macromolecular Science, Part A 47:6, pages 564-570.
Read now
Jian-Bing Zeng, Yi-Dong Li, Shao-Long Li, Yu-Zhong Wang & Ke-Ke Yang. (2009) Thermal and Thermo-Oxidative Degradation of Biodegradable Poly(Ester Urethane) Containing Poly(L-Lactic Acid) and Poly(Butylene Succinate) Blocks. Journal of Macromolecular Science, Part B 48:3, pages 635-649.
Read now
Johana Rincones, AneF. Zeidler, Maria CarolinaB. Grassi, MarceloF. Carazzolle & GonçaloA. G. Pereira. (2009) The Golden Bridge for Nature: The New Biology Applied to Bioplastics. Polymer Reviews 49:2, pages 85-106.
Read now
Rajeev Mehta, Vineet Kumar & S. N. Upadhyay. (2007) Mathematical Modeling of the Poly(lactic acid) Ring-Opening Polymerization using Stannous Octoate as a Catalyst. Polymer-Plastics Technology and Engineering 46:10, pages 933-937.
Read now
Rajeev Mehta, Vineet Kumar & S. N Upadhyay. (2007) Mathematical Modeling of the Poly(lactic acid) Ring–Opening Polymerization Kinetics. Polymer-Plastics Technology and Engineering 46:3, pages 257-264.
Read now

Articles from other publishers (323)

G. Jamirad, A. Montazeri & A. Rajabpour. (2024) Enhanced interfacial thermal conductance in functionalized boron nitride/polylactic acid nanocomposites: A molecular dynamics study. Progress in Organic Coatings 186, pages 108037.
Crossref
Matylda Szewczyk‐Łagodzińska, Dawid Oleksiuk, Sebastian Kowalczyk, Anna Czajka, Anna Dużyńska, Anna Łapińska, Joanna Ryszkowska, Piotr Dziewit, Jacek Janiszewski & Andrzej Plichta. (2023) Multifunctional Block Copolymers, Acting as Recycling Aids, by Atom Transfer Radical Polymerization. ChemSusChem.
Crossref
Sandeep Kumar, Brijesh Gangil, Lalit Ranakoti, Prabhakar Bhandari, Deepak Gupta & Manoj Kumar Gupta. (2023) An Investigation on Mechanical and Sliding Wear Properties of Titanium Oxide-Basalt Fiber-Based Hybrid PLA Composites Using Gray-Taguchi Approach. Journal of The Institution of Engineers (India): Series D.
Crossref
Xintong Jiang, Dongsu Bi, Yu Cheng, Shizhuo Wang, Bo-yu Peng, Haowen Shen, Tao Zhang, Xuefen Xia, Zheng Shen & Yalei Zhang. (2023) Enzyme pretreatments for anaerobic co-digestion of food waste blended with bioplastics: effects on methane production and microbial community structure. New Journal of Chemistry 47:45, pages 20846-20858.
Crossref
Payal Mukherjee, Naveen Raj & Senthilkumar Sivaprakasam. (2023) Harnessing valorization potential of whey permeate for D-lactic acid production using lactic acid bacteria. Biomass Conversion and Biorefinery 13:17, pages 15639-15658.
Crossref
Pratick Samanta & Bhanu Nandan. 2023. Polymer Crystallization. Polymer Crystallization 161 194 .
Jeffrey Allen, Guillermo Riveros, Ivan Beckman & Elton Freeman. (2023) Mesoscale Modeling of Extrusion and Solidification During Material Extrusion Additive Manufacturing. Recent Progress in Materials 05:04, pages 1-17.
Crossref
Badma N. Mankaev & Sergey S. Karlov. (2023) Metal Complexes in the Synthesis of Biodegradable Polymers: Achievements and Prospects. Materials 16:20, pages 6682.
Crossref
Luis Sosa-Vivas, Jhon Gonzalez-Delgado & Gabriel Torrente-Prato. (2022) Experimental and numerical study of orthotropic behavior of 3D printed polylactic acid by material extrusion. Progress in Additive Manufacturing 8:5, pages 947-959.
Crossref
Chandrika Ghoshal, Shashi Pandey & Avinash Tomer. 2023. Technology for a Sustainable Environment. Technology for a Sustainable Environment 160 197 .
Dong Hun Han, Young Min Kim, Dan Bi Lee, Kyu Hwan Lee & Han-Seong Kim. (2023) Characteristics of Complex Foaming Composites’ Normal Pressure Foaming of Using Rubber and Bio-Degradable Materials. Korean Journal of Materials Research 33:8, pages 323-329.
Crossref
Chenxi Liu, Jieyu Dai, Xueqin Wang & Xingyou Hu. (2023) The Influence of Textile Structure Characteristics on the Performance of Artificial Blood Vessels. Polymers 15:14, pages 3003.
Crossref
Robert A. Weiss. 2023. Polyester Films. Polyester Films 67 156 .
Nag Pooja, Ishita Chakraborty, Md. Hafizur Rahman & Nirmal Mazumder. (2023) An insight on sources and biodegradation of bioplastics: a review. 3 Biotech 13:7.
Crossref
Ruyi Chen & Haiyan Ma. (2023) Magnesium Complexes Supported by 6,6’‐Dimethylbiphenyl‐Bridged Salen Ligands: Synthesis, Characterization and Catalysis for rac ‐Lactide Polymerization . European Journal of Inorganic Chemistry 26:14.
Crossref
Ankit Chakraborty, Pradnya Ghalsasi & P. Radha. (2023) Insight into Nano-Fillers and Their Reinforcement onto Polylactic Acid. Journal of Inorganic and Organometallic Polymers and Materials 33:5, pages 1119-1133.
Crossref
Wei-Han Rao, Lin Yu & Jian-Dong Ding. (2023) Stride Strategy to Enable a Quasi-ergodic Search of Reaction Pathways Demonstrated by Ring-opening Polymerization of Cyclic Esters. Chinese Journal of Polymer Science 41:5, pages 745-759.
Crossref
T. Angelin Swetha, Abhispa Bora, K. Mohanrasu, P. Balaji, Rathinam Raja, Kumar Ponnuchamy, Govarthanan Muthusamy & A. Arun. (2023) A comprehensive review on polylactic acid (PLA) – Synthesis, processing and application in food packaging. International Journal of Biological Macromolecules 234, pages 123715.
Crossref
Xipo Zhao, Jiajie Yu, Xinyu Liang, Zepeng Huang, Juncheng Li & Shaoxian Peng. (2023) Crystallization behaviors regulations and mechanical performances enhancement approaches of polylactic acid (PLA) biodegradable materials modified by organic nucleating agents. International Journal of Biological Macromolecules 233, pages 123581.
Crossref
Moritz Venschott, Wolfgang F. Hoelderich & Matthias Eisenacher. (2023) 2nd generation PLA; Lactide formation directly from aqueous lactic acid. Catalysis Communications 177, pages 106636.
Crossref
Mariam Shbanah, Márton Jordanov, Zoltán Nyikes, László Tóth & Tünde Anna Kovács. (2023) The Effect of Heat Treatment on a 3D-Printed PLA Polymer’s Mechanical Properties. Polymers 15:6, pages 1587.
Crossref
Samanta Castañeda-Rodríguez, Maykel González-Torres, Rosa María Ribas-Aparicio, María Luisa Del Prado‑Audelo, Gerardo Leyva‑Gómez, Eda Sönmez Gürer & Javad Sharifi‑Rad. (2023) Recent advances in modified poly (lactic acid) as tissue engineering materials. Journal of Biological Engineering 17:1.
Crossref
Renzhi Li, Yangyang Feng, R. Hugh Gong & Constantinos Soutis. (2023) A Biodegradable Stereo-Complexed Poly (Lactic Acid) Drinking Straw of High Heat Resistance and Performance. Materials 16:6, pages 2438.
Crossref
Marc Martínez de Sarasa Buchaca, Felipe de la Cruz-Martínez, Luis F. Sánchez-Barba, Juan Tejeda, Ana M. Rodríguez, José A. Castro-Osma & Agustín Lara-Sánchez. (2023) One-pot terpolymerization of CHO, CO 2 and l -lactide using chloride indium catalysts . Dalton Transactions 52:11, pages 3482-3492.
Crossref
Feijie Li, Fuhai Zhou, Dario Romano & Sanjay Rastogi. (2023) Synthesis and Characterization of Well-Defined High-Molecular-Weight PDLA- b -PLLA and PDLA- b -PLLA- b -PDLA Stereo-Block Copolymers . Macromolecules 56:5, pages 1995-2008.
Crossref
A.M. Maadani, F. Davoodian & E. Salahinejad. (2023) Effects of PLGA coating on biological and mechanical behaviors of tissue engineering scaffolds. Progress in Organic Coatings 176, pages 107406.
Crossref
Congming Xiao. (2023) Rational development of a unique family of renewable polymers. Frontiers of Materials Science 17:1.
Crossref
Juliana V. C. Azevedo, Berenika Hausnerova, Bernhard Möginger & Tomas Sopik. (2023) Effect of Chain Extending Cross-Linkers on the Disintegration Behavior of Composted PBAT/PLA Blown Films. International Journal of Molecular Sciences 24:5, pages 4525.
Crossref
Alexander D Josowitz, Ranjit S Bindra & W Mark Saltzman. (2022) Polymer nanocarriers for targeted local delivery of agents in treating brain tumors. Nanotechnology 34:7, pages 072001.
Crossref
Niclas Conen, Martin Fuchs, Alexander Hoffmann, Sonja Herres‐Pawlis & Andreas Jupke. (2022) Taking the Next Step—Model‐Based Analysis of Robust and Non‐Toxic Zn Catalysts for the Ring Opening Polymerization of Lactide in the Polymer Melt. Advanced Sustainable Systems 7:2.
Crossref
Dileep Francis & Deepu Joy Parayil. 2023. Handbook of Bioplastics and Biocomposites Engineering Applications. Handbook of Bioplastics and Biocomposites Engineering Applications 121 148 .
Ahsan Mehmood, Neelu Raina, Vanarat Phakeenuya, Benjamaporn Wonganu & Kraipat Cheenkachorn. (2023) The current status and market trend of polylactic acid as biopolymer: Awareness and needs for sustainable development. Materials Today: Proceedings 72, pages 3049-3055.
Crossref
Suprakas Sinha Ray & Ritima Banerjee. 2023. Sustainable Polylactide-Based Composites. Sustainable Polylactide-Based Composites 1 24 .
Krishnendu Nath & Narayan Ch. Das. 2023. Biodegradable and Biocompatible Polymer Nanocomposites. Biodegradable and Biocompatible Polymer Nanocomposites 435 484 .
Meysam T. Chorsi, Thinh T. Le, Ritopa Das, Tra Vinikoor, Hamid T. Chorsi, Kazem Kazerounian, Horea Ilies & Thanh D. Nguyen. 2023. Encyclopedia of Materials: Electronics. Encyclopedia of Materials: Electronics 180 198 .
S. Z. Rogovina, M. M. Gasymov, S. M. Lomakin, O. P Kuznetsova, I. M. Ermolaev, V. G. Shevchenko, A. V. Shapagin, A. A. Arbuzov & A. A. Berlin. (2023) Influence of the Method of Obtaining Filled Polymer Nanocomposites of Polylactide Reduced Graphene Oxide on Their Properties and Structure. Mechanics of Composite Materials 58:6, pages 845-856.
Crossref
Mohan Das, Sayantan Santra, Rajlakshmi, Sarveshwaran Saravanabhupathy, Subhara Dey, Subhodeep Banerjee & Rintu Banerjee. 2023. Fungi and Fungal Products in Human Welfare and Biotechnology. Fungi and Fungal Products in Human Welfare and Biotechnology 211 256 .
Anju Paul, K. Sreedevi, Sreekala S. Sharma & V. N. Anjana. 2023. Handbook of Biopolymers. Handbook of Biopolymers 1195 1227 .
Fernando Teles & Filipe Antunes. (2022) Biopolymers as alternatives to synthetic polymers in flame‐retarded polymeric composites: A study of fire and mechanical behaviors. Journal of Vinyl and Additive Technology 29:1, pages 120-129.
Crossref
Philip B. Yang, Matthew G. Davidson, Karen J. Edler, Niamh Leaman, Elly K. Bathke, Strachan N. McCormick, Olga Matsarskaia & Steven Brown. (2022) Comparison of Cyclic and Linear Poly(lactide)s Using Small-Angle Neutron Scattering. Macromolecules 55:24, pages 11051-11058.
Crossref
Janetty Jany Pereira Barros, Carlos Pereira Soares, Esperidiana Augusta Barretos de Moura & Renate Maria Ramos Wellen. (2022) Enhanced miscibility of PBAT/PLA/lignin upon γ ‐irradiation and effects on the non‐isothermal crystallization . Journal of Applied Polymer Science 139:45.
Crossref
Amir Mohammad Maadani & Erfan Salahinejad. (2022) Performance comparison of PLA- and PLGA-coated porous bioceramic scaffolds: Mechanical, biodegradability, bioactivity, delivery and biocompatibility assessments. Journal of Controlled Release 351, pages 1-7.
Crossref
Feijie Li, Sanjay Rastogi & Dario Romano. (2022) Easy access to ultra-high molecular weight polylactones using a bismuth catalyst. Journal of Catalysis 415, pages 123-133.
Crossref
Feng Tang & Young Gyu Jeong. (2022) Improvement in thermal stability, elastic modulus, and impact strength of Poly(lactic acid) blends with modified polyketone. Polymer 257, pages 125281.
Crossref
Carmen Moya-Lopez, Joaquín González-Fuentes, Iván Bravo, David Chapron, Patrice Bourson, Carlos Alonso-Moreno & Daniel Hermida-Merino. (2022) Polylactide Perspectives in Biomedicine: From Novel Synthesis to the Application Performance. Pharmaceutics 14:8, pages 1673.
Crossref
Isabel M. Marrucho. 2022. Poly(Lactic Acid). Poly(Lactic Acid) 115 133 .
Mohammadreza Nofar, Gabriele Perego & Gian Domenico Cella. 2022. Poly(Lactic Acid). Poly(Lactic Acid) 169 190 .
Xin Zhang, Timothy J. Prior & Carl Redshaw. (2022) Niobium and Tantalum complexes derived from the acids Ph 2 C(X)CO 2 H (X = OH, NH 2 ): synthesis, structure and ROP capability . New Journal of Chemistry 46:29, pages 14146-14154.
Crossref
Thamer Aldhafeeri, Mansour Alotaibi & Carol Forance Barry. (2022) Impact of Melt Processing Conditions on the Degradation of Polylactic Acid. Polymers 14:14, pages 2790.
Crossref
Chunlin Tan, Fei Tao & Ping Xu. (2022) Direct carbon capture for the production of high-performance biodegradable plastics by cyanobacterial cell factories. Green Chemistry 24:11, pages 4470-4483.
Crossref
Carmen Moya-Lopez, Alberto Juan, Murillo Donizeti, Jesus Valcarcel, José A. Vazquez, Eduardo Solano, David Chapron, Patrice Bourson, Ivan Bravo, Carlos Alonso-Moreno, Pilar Clemente-Casares, Carlos Gracia-Fernández, Alessandro Longo, Georges Salloum-Abou-Jaoude, Alberto Ocaña, Manuel M. Piñeiro, Carolina Hermida-Merino & Daniel Hermida-Merino. (2022) Multifunctional PLA/Gelatin Bionanocomposites for Tailored Drug Delivery Systems. Pharmaceutics 14:6, pages 1138.
Crossref
Somayeh Sharafi Zamir, Babak Fathi, Abdellah Ajji, Mathieu Robert & Said Elkoun. (2022) Biodegradation of modified starch/poly lactic acid nanocomposite in soil. Polymer Degradation and Stability 199, pages 109902.
Crossref
M. Sukumar, K. Sudharsan & K. Radha Krishnan. 2022. Biopolymer‐Based Food Packaging. Biopolymer‐Based Food Packaging 264 281 .
Jaegyeong Lee, Dongil Kim, Hyosun Lee, Saira Nayab & Ji Hoon Han. (2022) Effect of initiator on the catalytic performance of zinc(II) complexes supported by aminomethylquinoline and aminomethylpyridine derived ligands in stereoselective ring opening polymerization of rac-lactide. Polyhedron 216, pages 115696.
Crossref
Sepehr Rastegar & Abbas Montazeri. (2022) Atomistic insights into the toughening role of surface-treated boron nitride nanosheets in PLA-based nanocomposites. European Polymer Journal 168, pages 111071.
Crossref
. 2022. Biorenewable Nanocomposite Materials, Vol. 1: Electrocatalysts and Energy Storage. Biorenewable Nanocomposite Materials, Vol. 1: Electrocatalysts and Energy Storage.
Gaurav Yadav & Md. Ahmaruzzaman. 2022. Biorenewable Nanocomposite Materials, Vol. 1: Electrocatalysts and Energy Storage. Biorenewable Nanocomposite Materials, Vol. 1: Electrocatalysts and Energy Storage 257 267 .
Ashfaq Ahmad, Fawzi Banat, Habiba Alsafar & Shadi W. Hasan. (2022) An overview of biodegradable poly (lactic acid) production from fermentative lactic acid for biomedical and bioplastic applications. Biomass Conversion and Biorefinery.
Crossref
Tamara M. Díez-Rodríguez, Enrique Blázquez-Blázquez, Ernesto Pérez & María L. Cerrada. (2022) Influence of Content in D Isomer and Incorporation of SBA-15 Silica on the Crystallization Ability and Mechanical Properties in PLLA Based Materials. Polymers 14:6, pages 1237.
Crossref
João Meneses, Tom van de Kemp, Raquel Costa-Almeida, Rúben Pereira, Fernão D. Magalhães, Miguel Castilho & Artur M. Pinto. (2022) Fabrication of Polymer/Graphene Biocomposites for Tissue Engineering. Polymers 14:5, pages 1038.
Crossref
Janardhan R. Koduru & Lakshmi P. Lingamdinne. 2022. Miniaturized Analytical Devices. Miniaturized Analytical Devices 121 152 .
Pamela V. S. Nylund, Baptiste Monney, Christoph Weder & Martin Albrecht. (2022) N-Heterocyclic carbene iron complexes catalyze the ring-opening polymerization of lactide. Catalysis Science & Technology 12:3, pages 996-1004.
Crossref
Xiang Yun Debbie Soo, Suxi Wang, Chee Chuan Jayven Yeo, Jiuwei Li, Xi Ping Ni, Lu Jiang, Kun Xue, Zibiao Li, Xunchang Fei, Qiang Zhu & Xian Jun Loh. (2022) Polylactic acid face masks: Are these the sustainable solutions in times of COVID-19 pandemic?. Science of The Total Environment 807, pages 151084.
Crossref
Tibor Horváth, Kálmán Marossy & Tamás J. Szabó. (2021) Ring-opening polymerization and plasticization of poly(L-lactic)acid by adding of glycerol-dioleate. Journal of Thermal Analysis and Calorimetry 147:3, pages 2221-2227.
Crossref
Qi Zhu, Kang Yu, Hanqiao Li, Qingqing Zhang & Dawei Tu. (2021) Rapid residual stress prediction and feedback control during fused deposition modeling of PLA. The International Journal of Advanced Manufacturing Technology 118:9-10, pages 3229-3240.
Crossref
R. Ilyas, M. Zuhri, H. Aisyah, M. Asyraf, S. Hassan, E. Zainudin, S. Sapuan, S. Sharma, S. Bangar, R. Jumaidin, Y. Nawab, A. Faudzi, H. Abral, M. Asrofi, E. Syafri & N. Sari. (2022) Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications. Polymers 14:1, pages 202.
Crossref
Rianne M. Lord, Felix D. Janeway, Laura Bird & Patrick C. McGowan. (2022) Bis(phenyl-β-diketonato)titanium(IV) ethoxide complexes: Ring-opening polymerization of l-lactide by solvent-free microwave irradiation. Polyhedron 211, pages 115520.
Crossref
K. Mohanrasu, R. Guru Raj Rao, V. Ananthi, G. Sivaprakash, G.H. Dinesh, T. Angelin Swetha, J. Jeyakanthan & A. Arun. 2022. Handbook of Microbial Nanotechnology. Handbook of Microbial Nanotechnology 331 354 .
Nishant Ranjan, Ranvijay Kumar, Rupinder Singh & Inderpreet S. Ahuja. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers 388 396 .
Nishant Ranjan, Rupinder Singh, Inderpreet S. Ahuja & Ranvijay Kumar. 2022. Encyclopedia of Materials: Plastics and Polymers. Encyclopedia of Materials: Plastics and Polymers 475 484 .
Diana Gregor-Svetec. 2022. Polymers for 3D Printing. Polymers for 3D Printing 155 269 .
Geetu P Paul & Nagajyothi Virivinti. (2021) An outlook on recent progress in poly(lactic acid): polymerization, modeling, and optimization. Iranian Polymer Journal 31:1, pages 59-81.
Crossref
Mohamed Bouti, Ratiba Irinislimane & Naima Belhaneche-Bensemra. (2021) Properties Investigation of Epoxidized Sunflower Oil as Bioplasticizer for Poly (Lactic Acid). Journal of Polymers and the Environment 30:1, pages 232-245.
Crossref
Anju Paul, K. Sreedevi, Sreekala S. Sharma & V. N. Anjana. 2022. Handbook of Biopolymers. Handbook of Biopolymers 1 33 .
Amirjalal Jalali, Sandra Romero-Diez, Mohammadreza Nofar & Chul B. Park. (2021) Entirely environment-friendly polylactide composites with outstanding heat resistance and superior mechanical performance fabricated by spunbond technology: Exploring the role of nanofibrillated stereocomplex polylactide crystals. International Journal of Biological Macromolecules 193, pages 2210-2220.
Crossref
Joseph A. Jaye & Ellen M. Sletten. (2021) Recent advances in the preparation of semifluorinated polymers. Polymer Chemistry 12:45, pages 6515-6526.
Crossref
Zainab A Ali, Alaa Karem Niamah & Hannosh Widad Salih. (2021) Isolation, Preparation and Characterization of Polylactic Acid Film Reinforced with Nano silica. Journal of Physics: Conference Series 2063:1, pages 012028.
Crossref
Alex P. Rickel, Xiajun Deng, Daniel Engebretson & Zhongkui Hong. (2021) Electrospun nanofiber scaffold for vascular tissue engineering. Materials Science and Engineering: C 129, pages 112373.
Crossref
Namdeo R. Jadhav, Shatavari P. Bhosale, Shraddha S. Bhosale, Snehal D. Mali, Pranil B. Toraskar & Triveni S. Kadam. (2021) Ionic liquids: Formulation avenues, drug delivery and therapeutic updates. Journal of Drug Delivery Science and Technology 65, pages 102694.
Crossref
Vengatesan M. Rangaraj, K. Rambabu, Fawzi Banat & Vikas Mittal. (2021) Natural antioxidants-based edible active food packaging: An overview of current advancements. Food Bioscience 43, pages 101251.
Crossref
Hyeong Min Yoo, Su-Yeon Jeong & Sung-Woong Choi. (2021) Analysis of the rheological property and crystallization behavior of polylactic acid (Ingeo™ Biopolymer 4032D) at different process temperatures. e-Polymers 21:1, pages 702-709.
Crossref
Juliana V. C. Azevedo, Esther Ramakers-van Dorp, Berenika Hausnerova & Bernhard Möginger. (2021) The Effects of Chain-Extending Cross-Linkers on the Mechanical and Thermal Properties of Poly(butylene adipate terephthalate)/Poly(lactic acid) Blown Films. Polymers 13:18, pages 3092.
Crossref
Konrad Stefaniak & Anna Masek. (2021) Green Copolymers Based on Poly(Lactic Acid)—Short Review. Materials 14:18, pages 5254.
Crossref
Ivan Lednev, Evgeniia Salomatina, Svetlana Ilyina, Sergey Zaitsev, Roman Kovylin & Larisa Smirnova. (2021) Development of Biodegradable Polymer Blends Based on Chitosan and Polylactide and Study of Their Properties. Materials 14:17, pages 4900.
Crossref
Serena Coiai, Maria Laura Di Lorenzo, Patrizia Cinelli, Maria Cristina Righetti & Elisa Passaglia. (2021) Binary Green Blends of Poly(lactic acid) with Poly(butylene adipate-co-butylene terephthalate) and Poly(butylene succinate-co-butylene adipate) and Their Nanocomposites. Polymers 13:15, pages 2489.
Crossref
Alessandra Longo, Giovanni Dal Poggetto, Mario Malinconico, Paola Laurienzo, Ernesto Di Maio & Maria Laura Di Lorenzo. (2021) Enhancement of crystallization kinetics of poly(l-lactic acid) by grafting with optically pure branches. Polymer 227, pages 123852.
Crossref
Alicja Katarzyna Michalczyk, Sylwia Garbaczewska, Bolesław Morytz, Arkadiusz Białek & Jerzy Zakrzewski. (2021) Influence of Nitrogen Sources on D-Lactic Acid Biosynthesis by Sporolactobacillus laevolacticus DSM 442 Strain. Fermentation 7:2, pages 78.
Crossref
Stefanie Teixeira, Katarzyna Morawa Eblagon, Filipa Miranda, M. Fernando R. Pereira & José Luis Figueiredo. (2021) Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications. C 7:2, pages 42.
Crossref
Tugba Dursun Usal, Cemile Kilic Bektas, Nesrin Hasirci & Vasif Hasirci. 2021. Biological Soft Matter. Biological Soft Matter 65 88 .
Alberto Di Bartolo, Giulia Infurna & Nadka Tzankova Dintcheva. (2021) A Review of Bioplastics and Their Adoption in the Circular Economy. Polymers 13:8, pages 1229.
Crossref
Ali Alperen Bakır, Resul Atik & Sezer Özerinç. (2021) Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review. Rapid Prototyping Journal 27:3, pages 537-561.
Crossref
Habib Awais, Yasir Nawab, Adnan Amjad, A. Anjang, Hazizan Md Akil & M. Shukur Zainol Abidin. (2021) Environmental benign natural fibre reinforced thermoplastic composites: A review. Composites Part C: Open Access 4, pages 100082.
Crossref
Ritima Banerjee & Suprakas Sinha Ray. (2021) An overview of the recent advances in polylactide‐based sustainable nanocomposites. Polymer Engineering & Science 61:3, pages 617-649.
Crossref
Huifeng Wang, Xuan Liu, Daniel Edward Christiansen, Seyyedfaridoddin Fattahpour, Kun Wang, Haiqing Song, Shafigh Mehraeen & Gang Cheng. (2021) Thermoplastic polyurethane with controllable degradation and critical anti-fouling properties. Biomaterials Science 9:4, pages 1381-1396.
Crossref
Marco Naddeo, Andrea Sorrentino & Daniela Pappalardo. (2021) Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone. Polymers 13:4, pages 627.
Crossref
John Masani Nduko & Seiichi Taguchi. (2021) Microbial Production of Biodegradable Lactate-Based Polymers and Oligomeric Building Blocks From Renewable and Waste Resources. Frontiers in Bioengineering and Biotechnology 8.
Crossref
Rong Liu & Yue Zhao. (2021) A Short Review on the Synthesis of Polylactic Acid by Reactive Extrusion and Static Mixing Reaction Techniques. Science of Advanced Materials 13:2, pages 181-187.
Crossref
Abdullah Fahad A. Alshamrani, Orlando Santoro, Samuel Ounsworth, Timothy J. Prior, Graeme J. Stasiuk & Carl Redshaw. (2021) Synthesis, characterisation and ROP catalytic evaluation of Cu(II) complexes bearing 2,2ʹ-diphenylglycine-derived moieties. Polyhedron 195, pages 114977.
Crossref
Anuj Shrivastava & Sreekanth Dondapati. (2021) Biodegradable composites based on biopolymers and natural bast fibres: A review. Materials Today: Proceedings 46, pages 1420-1428.
Crossref
Ashutosh Kumar Pandey, Ranjna Sirohi, Sudha Upadhyay, Mitali Mishra, Virendra Kumar, Lalit Kumar Singh & Ashok Pandey. 2021. Biomass, Biofuels, Biochemicals. Biomass, Biofuels, Biochemicals 309 357 .
Teresa Cecchi & Carla De CarolisTeresa Cecchi. 2021. Biobased Products from Food Sector Waste. Biobased Products from Food Sector Waste 231 285 .
Ge‐Xia Wang, Dan Huang, Jun‐Hui Ji, Carolin Völker & Frederik R. Wurm. (2020) Seawater‐Degradable Polymers—Fighting the Marine Plastic Pollution. Advanced Science 8:1.
Crossref
Dan Huang, Zhi-De Hu, Tian-Yuan Liu, Bo Lu, Zhi-Chao Zhen, Ge-Xia Wang & Jun-Hui Ji. (2020) Seawater degradation of PLA accelerated by water-soluble PVA. e-Polymers 20:1, pages 759-772.
Crossref
Gianna Tutoni & Matthew L. Becker. (2020) Underexplored Stereocomplex Polymeric Scaffolds with Improved Thermal and Mechanical Properties. Macromolecules 53:23, pages 10303-10314.
Crossref
J C Jalani, Z I M Arshad, S Md Shaarani, R Che Man, S K Abdul Mudalip & S Z Sulaiman. (2020) Isolation and characterization of PLA-degrading bacteria from landfill soil at mesophilic temperature. IOP Conference Series: Materials Science and Engineering 991:1, pages 012004.
Crossref
Marta Przybysz-Romatowska, Józef Haponiuk & Krzysztof Formela. (2020) Reactive extrusion of biodegradable aliphatic polyesters in the presence of free-radical-initiators: A review. Polymer Degradation and Stability 182, pages 109383.
Crossref
Amirjalal Jalali, Jung- Hyun Kim, Ali M. Zolali, Iman Soltani, Mohammadreza Nofar, Ehsan Behzadfar & Chul B. Park. (2020) Peculiar crystallization and viscoelastic properties of polylactide/polytetrafluoroethylene composites induced by in-situ formed 3D nanofiber network. Composites Part B: Engineering 200, pages 108361.
Crossref
Mohsin Ejaz, Muhammad Muzammil Azad, Atta Ur Rehman Shah, S. Kamran Afaq & Jung-il Song. (2020) Mechanical and Biodegradable Properties of Jute/Flax Reinforced PLA Composites. Fibers and Polymers 21:11, pages 2635-2641.
Crossref
Kayode Oluwabunmi, Nandika Anne D’Souza, Weihuan Zhao, Tae-Youl Choi & Thomas Theyson. (2020) Compostable, fully biobased foams using PLA and micro cellulose for zero energy buildings. Scientific Reports 10:1.
Crossref
Giada Innocenti, Eleni Papadopoulos, Giuseppe Fornasari, Fabrizio Cavani, Andrew J. Medford & Carsten Sievers. (2020) Continuous Liquid-Phase Upgrading of Dihydroxyacetone to Lactic Acid over Metal Phosphate Catalysts. ACS Catalysis 10:20, pages 11936-11950.
Crossref
Cláudia Martins, Veeren M Chauhan, Marco Araújo, Amjad Abouselo, Cristina C Barrias, Jonathan W Aylott & Bruno Sarmento. (2020) Advanced polymeric nanotechnology to augment therapeutic delivery and disease diagnosis. Nanomedicine 15:23, pages 2287-2309.
Crossref
Dinesh Yadav, Ramesh Kumar Garg, Akash Ahlawat & Deepak Chhabra. (2020) 3D printable biomaterials for orthopedic implants: Solution for sustainable and circular economy. Resources Policy 68, pages 101767.
Crossref
Feijie Li, Sanjay Rastogi & Dario Romano. (2020) Synthesis of Ultrahigh Molecular Weight PLAs Using a Phenoxy-Imine Al(III) Complex. ACS Omega 5:38, pages 24230-24238.
Crossref
Santimukul Santra, Zachary Shaw, Raghunath Narayanam, Vedant Jain & Tuhina Banerjee. (2020) Selective O-Alkylation of 2,2′-Bis(hydroxymethyl)propionic Acid to Synthesize Biodegradable Polymers for Drug Delivery Applications. ACS Applied Polymer Materials 2:8, pages 3465-3473.
Crossref
Chun-Juei Chang, Chi-Feng Chiu, Kuo-Hui Wu, Yu-Lun Chang, Yi-Chun Lai, Shangwu Ding & Hsuan-Ying Chen. (2020) N-heterocyclic ligand optimization for aluminum complexes in ε-caprolactone and L-Lactide polymerization. Polymer 202, pages 122572.
Crossref
Orlando Santoro, Xin Zhang & Carl Redshaw. (2020) Synthesis of Biodegradable Polymers: A Review on the Use of Schiff-Base Metal Complexes as Catalysts for the Ring Opening Polymerization (ROP) of Cyclic Esters. Catalysts 10:7, pages 800.
Crossref
Corina L. Reichert, Elodie Bugnicourt, Maria-Beatrice Coltelli, Patrizia Cinelli, Andrea Lazzeri, Ilaria Canesi, Francesca Braca, Belén Monje Martínez, Rafael Alonso, Lodovico Agostinis, Steven Verstichel, Lasse Six, Steven De Mets, Elena Cantos Gómez, Constance Ißbrücker, Ruben Geerinck, David F. Nettleton, Inmaculada Campos, Erik Sauter, Pascal Pieczyk & Markus Schmid. (2020) Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability. Polymers 12:7, pages 1558.
Crossref
Hongli Xu, Jingbing Xie, Zhongbo Liu, Jun Wang & Yonghong Deng. (2020) Carbonyl-coordinating polymers for high-voltage solid-state lithium batteries: Solid polymer electrolytes. MRS Energy & Sustainability 7:1.
Crossref
Shujing Zhang, Baohua Guo, Günter Reiter & Jun Xu. (2020) Estimation of the Size of Critical Secondary Nuclei of Melt-Grown Poly( l -lactide) Lamellar Crystals . Macromolecules 53:9, pages 3482-3492.
Crossref
Mahitha Udayakumar, Mariann Kollár, Ferenc Kristály, Máté Leskó, Tamás Szabó, Kálmán Marossy, Ildikó Tasnádi & Zoltán Németh. (2020) Temperature and Time Dependence of the Solvent-Induced Crystallization of Poly(l-lactide). Polymers 12:5, pages 1065.
Crossref
K. Jim Jem & Bowen Tan. (2020) The development and challenges of poly (lactic acid) and poly (glycolic acid). Advanced Industrial and Engineering Polymer Research 3:2, pages 60-70.
Crossref
Manel Ziadi, Sana M’Hir, Abdelkarim Aydi & Moktar Hamdi. (2020) Bioreactor Scale-Up and Kinetic Modeling of Lactic Acid and Biomass Production by Enterococcus faecalis SLT13 during Batch Culture on Hydrolyzed Cheese Whey . Journal of Chemistry 2020, pages 1-9.
Crossref
Shu-Gui Yang, Hui-Jie Xie, Hina Saba, Liliana Cseh & Goran Ungar. (2020) Fluorescence microscopy tracking of dyes, nanoparticles and quantum dots during growth of polymer spherulites. Polymer 191, pages 122246.
Crossref
Yun Kee Jo & Daeyeon Lee. (2019) Biopolymer Microparticles Prepared by Microfluidics for Biomedical Applications. Small 16:9.
Crossref
Abhilash Venkateshaiah, Vinod V.T. Padil, Malladi Nagalakshmaiah, Stanisław Waclawek, Miroslav Černík & Rajender S. Varma. (2020) Microscopic Techniques for the Analysis of Micro and Nanostructures of Biopolymers and Their Derivatives. Polymers 12:3, pages 512.
Crossref
E Budianto & R Dhafiningtia. (2020) Effect of nonionic surfactant in the preparation of microsphere based on blend of poly(lactic acid) and polycaprolactone. IOP Conference Series: Materials Science and Engineering 763:1, pages 012021.
Crossref
Kavita K. Mohite & Baijayantimala Garnaik. (2020) Kinetic and biocompatibility investigation on the catalytic ring opening polymerization of l-lactide in bulk using cyclic Bu2Sn initiators derived from ethylene glycol, pentaerythritol and cloisite 30B. Polyhedron 175, pages 114202.
Crossref
Sandip K. Singh & Anthony W. Savoy. (2020) Ionic liquids synthesis and applications: An overview. Journal of Molecular Liquids 297, pages 112038.
Crossref
Fathilah B. Ali, Hazleen Anuar & Jamarosliza Jamaluddin. 2020. Encyclopedia of Renewable and Sustainable Materials. Encyclopedia of Renewable and Sustainable Materials 569 575 .
Anila Zahid & Renu Khedkar. 2020. Sustainable Food Waste Management. Sustainable Food Waste Management 241 265 .
Mert Akgün, İhsan Başaran, Salih C. Suner & Ayhan Oral. (2019) Geraniol and cinnamaldehyde as natural antibacterial additives for poly(lactic acid) and their plasticizing effects. Journal of Polymer Engineering 40:1, pages 38-48.
Crossref
Maryam Islami, Zahra Payandeh, Elaheh Dalir Abdolahinia, Ehsan Saburi, Fatemeh Soleimanifar, Mousa Kehtari, Yousef Mortazavi, Samad Nadri & Maryam Darvish. (2019) Fucosylated umbilical cord blood hematopoietic stem cell expansion on selectin‐coated scaffolds. Journal of Cellular Physiology 234:12, pages 22593-22603.
Crossref
Jacob Sag, Daniela Goedderz, Philipp Kukla, Lara Greiner, Frank Schönberger & Manfred Döring. (2019) Phosphorus-Containing Flame Retardants from Biobased Chemicals and Their Application in Polyesters and Epoxy Resins. Molecules 24:20, pages 3746.
Crossref
Olesya Laput, Irina Vasenina, Maria Cecilia Salvadori, Konstantin Savkin, Daniil Zuza & Irina Kurzina. (2019) Low-temperature plasma treatment of polylactic acid and PLA/HA composite material. Journal of Materials Science 54:17, pages 11726-11738.
Crossref
Jiarui Han, Yunxuan Weng, Jun Xu & Baohua Guo. (2019) Thermo-sensitive micelles based on amphiphilic poly(butylene 2-methylsuccinate)-poly(ethylene glycol) multi-block copolyesters as the pesticide carriers. Colloids and Surfaces A: Physicochemical and Engineering Aspects 575, pages 84-93.
Crossref
Mahsa Solati, Ardeshir Saeidi & Ismail Ghasemi. (2019) The effect of graphene nanoplatelets on dynamic properties, crystallization, and morphology of a biodegradable blend of poly(lactic acid)/thermoplastic starch. Iranian Polymer Journal 28:8, pages 649-658.
Crossref
Masoud Razavi & Shi-Qing Wang. (2019) Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?. Macromolecules 52:14, pages 5429-5441.
Crossref
R. N. Kumar & A Pizzi. 2019. Adhesives for Wood and Lignocellulosic Materials. Adhesives for Wood and Lignocellulosic Materials 467 481 .
Somayyah Abdul Munim & Zulfiqar Ali Raza. (2018) Poly(lactic acid) based hydrogels: formation, characteristics and biomedical applications. Journal of Porous Materials 26:3, pages 881-901.
Crossref
George John, Subbiah Nagarajan, Praveen Kumar Vemula, Julian R. Silverman & C.K.S. Pillai. (2019) Natural monomers: A mine for functional and sustainable materials – Occurrence, chemical modification and polymerization. Progress in Polymer Science 92, pages 158-209.
Crossref
Vida Montazeri Davoodi, Zahed Ahmadi & Faramarz Afshar Taromi. (2018) A journey across the solid state polymerization to assess the role of critical factors influencing the molecular weight of polylactic acid. Journal of Vinyl and Additive Technology 25:2, pages 165-171.
Crossref
Seongmin Heo, Hyun Woo Park, Jay H. Lee & Yong Keun Chang. (2019) Design and Evaluation of Sustainable Lactide Production Process with an One-Step Gas Phase Synthesis Route. ACS Sustainable Chemistry & Engineering 7:6, pages 6178-6184.
Crossref
Siriwan Praban, Parichat Piromjitpong, Vagulejan Balasanthiran, Savithra Jayaraj, Malcolm H. Chisholm, Jonggol Tantirungrotechai & Khamphee Phomphrai. (2019) Highly efficient metal( iii ) porphyrin and salen complexes for the polymerization of rac -lactide under ambient conditions . Dalton Transactions 48:10, pages 3223-3230.
Crossref
Jae Choon Lee, Myeon-Cheon Choi, Dong-Hee Choi & Chang-Sik Ha. (2019) Toughness enhancement of poly(lactic acid) through hybridisation with epoxide-functionalised silane via reactive extrusion. Polymer Degradation and Stability 160, pages 195-202.
Crossref
Gue Seon Lee, Bo Reum Moon, Haemin Jeong, Jihoon Shin & Jeung Gon Kim. (2019) Mechanochemical synthesis of poly(lactic acid) block copolymers: overcoming the miscibility of the macroinitiator, monomer and catalyst under solvent-free conditions. Polymer Chemistry 10:4, pages 539-545.
Crossref
Muhammad Imran Asad, Naveed Ahmed, Asim Ur-Rehman & Gul Majid Khan. 2019. Materials for Biomedical Engineering. Materials for Biomedical Engineering 381 415 .
Adriaan S. Luyt & Sarah S. Malik. 2019. Plastics to Energy. Plastics to Energy 403 423 .
Nnamdi C. Iheaturu, Ihuoma V. Diwe, Alma Tamunonengiofori Banigo, Oluyemi O. Daramola & Emmanuel Rotimi Sadiku. 2019. Green Biopolymers and their Nanocomposites. Green Biopolymers and their Nanocomposites 267 282 .
Maria Nerantzaki, Lydia Prokopiou, Dimitrios N. Bikiaris, Dimitra Patsiaoura, Kostantinos Chrissafis, Panagiotis Klonos, Apostolos Kyritsis & Polycarpos Pissis. (2018) In situ prepared poly(DL-lactic acid)/silica nanocomposites: Study of molecular composition, thermal stability, glass transition and molecular dynamics. Thermochimica Acta 669, pages 16-29.
Crossref
Sundus Riaz, Nosheen Fatima, Ahmed Rasheed, Mehvish Riaz, Faiza Anwar & Yamna Khatoon. (2018) Metabolic Engineered Biocatalyst: A Solution for PLA Based Problems. International Journal of Biomaterials 2018, pages 1-9.
Crossref
Jinwoo Park, Hyungtae Cho, Dongwon Hwang, Seungnam Kim, Il Moon & Myungjun Kim. (2018) Design of a Novel Process for Continuous Lactide Synthesis from Lactic Acid. Industrial & Engineering Chemistry Research 57:35, pages 11955-11962.
Crossref
Marwa Khemakhem, Khalid Lamnawar, Abderrahim Maazouz & Mohamed Jaziri. (2016) Biocomposites based on polylactic acid and olive solid waste fillers: Effect of two compatibilization approaches on the physicochemical, rheological, and mechanical properties. Polymer Composites 39:S1.
Crossref
Bai Xue, Lanxiang Ji, Jianguo Deng & Junhua Zhang. (2018) Highly electrically conducting poly(L-lactic acid)/graphite composites prepared via in situ expansion and subsequent reduction of graphite . Journal of Polymer Engineering 38:2, pages 167-177.
Crossref
Muhammet Uzun. (2018) A review of wound management materials. Journal of Textile Engineering & Fashion Technology 4:1.
Crossref
Xinyi Chen & Changyou Gao. (2018) Influences of surface coating of PLGA nanoparticles on immune activation of macrophages. Journal of Materials Chemistry B 6:14, pages 2065-2077.
Crossref
Aleksandra Mitrovic, Jelena Muncan, Igor Hut, Svetlana Pelemis, Katarina Colic & Lidija Matija. 2018. Biomaterials in Clinical Practice. Biomaterials in Clinical Practice 119 147 .
Satya P. Dubey, Vijay K. Thakur, Suryanarayanan Krishnaswamy, Hrushikesh A. Abhyankar, Veronica Marchante & James L. Brighton. (2017) Progress in environmental-friendly polymer nanocomposite material from PLA: Synthesis, processing and applications. Vacuum 146, pages 655-663.
Crossref
Yunzi Hu, Walid A. Daoud, Bin Fei, Lei Chen, Tsz Him Kwan & Carol Sze Ki Lin. (2017) Efficient ZnO aqueous nanoparticle catalysed lactide synthesis for poly(lactic acid) fibre production from food waste. Journal of Cleaner Production 165, pages 157-167.
Crossref
Mohsen Ali Mandegari, Somayeh Farzad, Eugéne van Rensburg & Johann F. Görgens. (2017) Multi‐criteria analysis of a biorefinery for co‐production of lactic acid and ethanol from sugarcane lignocellulose. Biofuels, Bioproducts and Biorefining 11:6, pages 971-990.
Crossref
Amir Ghassemi, Siavosh Moghaddamzadeh, Carl Duchesne & Denis Rodrigue. (2017) Effect of annealing on gas permeability and mechanical properties of polylactic acid/talc composite films. Journal of Plastic Film & Sheeting 33:4, pages 361-383.
Crossref
Sadia Mehmood Satti, Aamer Ali Shah, Rafael Auras & Terence L. Marsh. (2017) Isolation and characterization of bacteria capable of degrading poly(lactic acid) at ambient temperature. Polymer Degradation and Stability 144, pages 392-400.
Crossref
Chen Zhang, Weikai Gu, Yaorong Wang & Yingming Yao. (2017) Synthesis and characterization of trinuclear and mononuclear rare-earth metal aryloxides supported by Salpn ligand and their application for the polymerization of rac -lactide. Polyhedron 134, pages 22-29.
Crossref
Malin Brodin, María Vallejos, Mihaela Tanase Opedal, María Cristina Area & Gary Chinga-Carrasco. (2017) Lignocellulosics as sustainable resources for production of bioplastics – A review. Journal of Cleaner Production 162, pages 646-664.
Crossref
T. S. Demina, A. B. Gilman & A. N. Zelenetskii. (2017) Application of high-energy chemistry methods to the modification of the structure and properties of polylactide (a review). High Energy Chemistry 51:4, pages 302-314.
Crossref
Zeynep Aytac, Nalan Oya San Keskin, Turgay Tekinay & Tamer Uyar. (2017) Antioxidant α-tocopherol/γ-cyclodextrin-inclusion complex encapsulated poly(lactic acid) electrospun nanofibrous web for food packaging. Journal of Applied Polymer Science 134:21.
Crossref
Sung-Bin Park, Eugene Lih, Kwang-Sook Park, Yoon Ki Joung & Dong Keun Han. (2017) Biopolymer-based functional composites for medical applications. Progress in Polymer Science 68, pages 77-105.
Crossref
Adam E. Jakus, Katie D. Koube, Nicholas R. Geisendorfer & Ramille N. Shah. (2017) Robust and Elastic Lunar and Martian Structures from 3D-Printed Regolith Inks. Scientific Reports 7:1.
Crossref
Ankit Pundir, P. Santhana Gopala Krishnan & Sanjay Kumar Nayak. (2017) Effect of Nanocalcium Carbonate Content on the Properties of PLA Nanocomposites. Journal of Composites and Biodegradable Polymers 5:1, pages 26-33.
Crossref
Dimitrios Meimaroglou, Prokopios Pladis & Costas Kiparissides. (2016) Dynamic Monte Carlo Simulation of the l,l ‐Lactide Ring‐Opening Polymerization . Macromolecular Reaction Engineering 11:1.
Crossref
M. Rabnawaz, I. Wyman, R. Auras & S. Cheng. (2017) A roadmap towards green packaging: the current status and future outlook for polyesters in the packaging industry. Green Chem. 19:20, pages 4737-4753.
Crossref
K. R. Delle Chiaie, A. B. Biernesser, M. A. Ortuño, B. Dereli, D. A. Iovan, M. J. T. Wilding, B. Li, C. J. Cramer & J. A. Byers. (2017) The role of ligand redox non-innocence in ring-opening polymerization reactions catalysed by bis(imino)pyridine iron alkoxide complexes. Dalton Transactions 46:38, pages 12971-12980.
Crossref
C.P. Rivero, Y. Hu, T.H. Kwan, C. Webb, C. Theodoropoulos, W. Daoud & C.S.K. Lin. 2017. Current Developments in Biotechnology and Bioengineering. Current Developments in Biotechnology and Bioengineering 1 26 .
Jim Philp & Ronald Atlas. 2017. Microbial Resources. Microbial Resources 77 101 .
F. Sarasini. 2017. Biocomposites for High-Performance Applications. Biocomposites for High-Performance Applications 81 123 .
G. Storti & M. Lattuada. 2017. Bioresorbable Polymers for Biomedical Applications. Bioresorbable Polymers for Biomedical Applications 153 179 .
Mohammad Reza Ketabchi, Mohammad Khalid, Chantara Thevy Ratnam & Rashmi Walvekar. (2016) Mechanical and thermal properties of polylactic acid composites reinforced with cellulose nanoparticles extracted from kenaf fibre. Materials Research Express 3:12, pages 125301.
Crossref
Mayra Rostagno, Erik J. Price, Alexander G. Pemba, Ion Ghiriviga, Khalil A. Abboud & Stephen A. Miller. (2016) Sustainable polyacetals from erythritol and bioaromatics. Journal of Applied Polymer Science 133:45.
Crossref
Harivardhan Reddy Lakkireddy & Didier Bazile. (2016) Building the design, translation and development principles of polymeric nanomedicines using the case of clinically advanced poly(lactide(glycolide))–poly(ethylene glycol) nanotechnology as a model: An industrial viewpoint. Advanced Drug Delivery Reviews 107, pages 289-332.
Crossref
Shady Farah, Daniel G. Anderson & Robert Langer. (2016) Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review. Advanced Drug Delivery Reviews 107, pages 367-392.
Crossref
Marius Murariu & Philippe Dubois. (2016) PLA composites: From production to properties. Advanced Drug Delivery Reviews 107, pages 17-46.
Crossref

Displaying 200 of 343 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.