Citations (25)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Nirmal Rakeshbhai Ravaliya & Pramod Kumar Gupta. (2023) Damage analysis and energy absorption capacity of hollow square steel tubes subjected to conical hammer impact. Australian Journal of Structural Engineering 0:0, pages 1-21.
Read now
Read now
Yinan Wang, Zhi Wang, Wenqi Zhang, Nana Yang & Xiongliang Yao. (2022) A new similarity law for penetration of steel plates by blunt projectiles. Ships and Offshore Structures 0:0, pages 1-10.
Read now
Read now
Hassan Iftekhar Ahmed, Muhammad Umair, Yasir Nawab & Syed Talha Ali Hamdani. (2021) Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns. The Journal of The Textile Institute 112:9, pages 1417-1427.
Read now
Read now
Bong Ju Kim. (2018) Experimental study on impact damage of membrane-type LNG carrier cargo containment system due to dropped objects. Ships and Offshore Structures 13:sup1, pages 339-347.
Read now
Read now
Tingbian Zhan, Jinzhu Li, Shufang Lv & Zhigang Chen. (2016) Residual velocity for the truncated ogival-nose projectile into stiffened plates. Ships and Offshore Structures 11:6, pages 636-644.
Read now
Read now
Articles from other publishers (20)
Jiayou Zhou, Yanjie Zhao, Yichi Zhang, Lunping Zhang, Yuchao Yuan & Wenyong Tang. (2023) An analytical method for evaluating the structural resistance of plate structures under in-plane impact load in ship-side collision scenarios. Ocean Engineering 288, pages 115961.
Crossref
Crossref
D.Z. Yankelevsky, V.R. Feldgun & Y.S. Karinski. (2023) The DISCS method for perforation simulation of thin metallic plates by a rigid projectile. International Journal of Solids and Structures 281, pages 112440.
Crossref
Crossref
Nikhil Khaire, G. Tiwari & M.A. Iqbal. (2021) Effect of eccentricity and obliquity on the ballistic performance and energy dissipation of hemispherical shell subjected to ogive nosed. Thin-Walled Structures 161, pages 107447.
Crossref
Crossref
Dimas Smith, Carlos Graciano & Gabriela Martínez. (2021) Expanded metal: A review of manufacturing, applications and structural performance. Thin-Walled Structures 160, pages 107371.
Crossref
Crossref
Zaid Mohammad, Pramod Kumar Gupta, Abdul Baqi & Mohd. Ashraf Iqbal. (2021) Ballistic performance of monolithic and double layered thin-metallic hemispherical shells at normal and oblique impact. Thin-Walled Structures 159, pages 107257.
Crossref
Crossref
K. Senthil & M.A. Iqbal. (2021) Prediction of superior target layer configuration of armour steel, mild steel and aluminium 7075-T651 alloy against 7.62 AP projectile. Structures 29, pages 2106-2119.
Crossref
Crossref
Bin Liu & C. Guedes Soares. (2019) Effect of strain rate on dynamic responses of laterally impacted steel plates. International Journal of Mechanical Sciences 160, pages 307-317.
Crossref
Crossref
K. Senthil, M.A. Iqbal, B. Arindam, R. Mittal & N.K. Gupta. (2018) Ballistic resistance of 2024 aluminium plates against hemispherical, sphere and blunt nose projectiles. Thin-Walled Structures 126, pages 94-105.
Crossref
Crossref
Bin Liu, Preben Terndrup Pedersen, Ling Zhu & Shengming Zhang. (2018) Review of experiments and calculation procedures for ship collision and grounding damage. Marine Structures 59, pages 105-121.
Crossref
Crossref
Jeom Kee Paik. 2018. Ultimate Limit State Analysis and Design of Plated Structures. Ultimate Limit State Analysis and Design of Plated Structures
471
538
.
Pengfei Wang, Jinglei Yang, Xin Li, Mao Liu, Xin Zhang, Dawei Sun, Chenlu Bao, Guangfa Gao, Mohd Yazid Yahya & Songlin Xu. (2017) Modification of the contact surfaces for improving the puncture resistance of laminar structures. Scientific Reports 7:1.
Crossref
Crossref
Tohid Mirzababaie Mostofi, Hashem Babaei, Majid Alitavoli & Sedigheh Hosseinzadeh. (2017) On dimensionless numbers for predicting large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile. Thin-Walled Structures 112, pages 118-124.
Crossref
Crossref
Xiangshao Kong, Xiao Li, Cheng Zheng, Fang Liu & Wei-guo Wu. (2017) Similarity considerations for scale-down model versus prototype on impact response of plates under blast loads. International Journal of Impact Engineering 101, pages 32-41.
Crossref
Crossref
H. Babaei, T. Mirzababaie Mostofi & M. Alitavoli. (2016) Experimental and analytical investigation into large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile. Thin-Walled Structures 107, pages 257-265.
Crossref
Crossref
Ki Jong Kim, Jong Hwan Lee, Dae Kyeom Park, Bo Gyeong Jung, Xu Han & Jeom Kee Paik. (2016) An experimental and numerical study on nonlinear impact responses of steel-plated structures in an Arctic environment. International Journal of Impact Engineering 93, pages 99-115.
Crossref
Crossref
Bin Liu & C. Guedes Soares. (2016) Experimental and numerical analysis of the crushing behaviour of stiffened web girders. International Journal of Impact Engineering 88, pages 22-38.
Crossref
Crossref
Abbas Niknejad & Amin Zareei. (2015) Ballistic limit velocity of empty rectangular metal columns under a blunt projectile penetration. The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology 13:1, pages 119-131.
Crossref
Crossref
Yufeng Gong, Yingxin Gao, De Xie & Jingxi Liu. (2015) Deflection and fracture of a clamped plate under lateral indentation by a sphere. Ocean Engineering 103, pages 21-30.
Crossref
Crossref
Wen Su Chen, Hong Hao & Hao Du. (2014) Numerical Study of Corrugated Metal Panels Subjected to Windborne Debris Impacts. Key Engineering Materials 626, pages 109-114.
Crossref
Crossref
B. Liu, R. Villavicencio & C. Guedes Soares. (2014) On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter. International Journal of Mechanical Sciences 80, pages 1-15.
Crossref
Crossref