Impact perforation of steel plates

References

• Aly SY, Li QM. 2008. Critical impact energy for the perforation of metallic plates. Nucl Eng Des. 238(10):2521–2528.
   Web of Science ®Google Scholar
• Anderson CE. 2001. Proceedings of hypervelocity impact symposium. Int J Impact Eng. 26:1–890.
   Web of Science ®Google Scholar
• Armstrong RW, Walley SM. 2008. High strain rate properties of metals and alloys. Int Mater Rev. 53(3):105–128.
   Web of Science ®Google Scholar
• Atkins AG. 2012. Perforation of metal plates due to through-thickness shearing and cracking: Optimum toughness/strength ratios, deformation transitions and scaling. Int J Impact Eng. 48:4–14.Doi. 10.1016/j.ijimpeng.2010.06.005.
   Web of Science ®Google Scholar
• Backman ME, Goldsmith W. 1978. The mechanics of penetration of projectiles into targets. Int J Eng Sci. 16(1):1–99.
   Web of Science ®Google Scholar
• Blyth PH, Atkins AG. 2002. Stabbing of metal sheets by a triangular knife (an archaeological investigation). Int J Impact Eng. 27(4):459–473.
   Web of Science ®Google Scholar
• Borvik T, Forrestal MJ, Hopperstad OS, Warren TL, Langseth M. 2009. Perforation of AA 5083-H116 aluminium plates with conical-nose steel projectiles - calculations. Int J Impact Eng. 36(3):426–437.
   Web of Science ®Google Scholar
• Borvik T, Hopperstad OS, Langseth M, Malo KA. 2003. Effect of target thickness in blunt projectile penetration of weldox 460E plates. Int J Impact Eng. 28(4):413–464.
   Web of Science ®Google Scholar
• Corbett GG, Reid SR. 1993. Quasi-static and dynamic local loading of monolithic simply-supported steel plate. Int J Impact Eng. 13(3):423–441.
   Web of Science ®Google Scholar
• Corbett GG, Reid SR, Johnson W. 1996. Impact loading of plates and shells by free-flying projectiles: a review. Int J Impact Eng. 18(2):141–230.
   Web of Science ®Google Scholar
• Corran RSJ, Shadbolt PJ, Ruiz C. 1983. Impact loading of plates – an experimental investigation. Int J Impact Eng. 1(1):3–22.
   Google Scholar
• Dean J, Dunleavy CS, Brown PM, Clyne TW. 2009. Energy absorption during projectile perforation of thin steel plates and the kinetic energy of ejected fragments. Int J Impact Eng. 36(10–11):1250–1258.
   Web of Science ®Google Scholar
• Dey S, Borvik T, Hopperstad OS, Leinum JR, Langseth M. 2004. The effect of target strength on the perforation of steel plates using three different projectile nose shapes. Int J Impact Eng. 30(8–9):1005–1038.
   Web of Science ®Google Scholar
• Dey S, Borvik T, Teng X, Wierzbicki T, Hopperstad OS. 2007. On the ballistic resistance of double-layered steel plates: an experimental and numerical investigation. Int J Solids Struct. 44(20):6701–6723.
   Web of Science ®Google Scholar
• Florence AL. 1977. Response of circular plates to central pulse loading. Int J Solids Struct. 13(11):1091–1102.
   Web of Science ®Google Scholar
• Forrestal MJ, Hanchak SJ. 1999. Perforation experiments on HY-100 steel plates with 4340 Rc 38 and maraging T-250 steel rod projectiles. Int J Impact Eng. 22(9–10):923–933.
   Web of Science ®Google Scholar
• Goldsmith W. 1985. Initiation of perforation in thin plates by projectiles. . In: Reid SR, editor. Metal forming and impact mechanics. Oxford (UK): Pergamon Press. p. 271–287.
   Google Scholar
• Goldsmith W. 1999. Non-ideal projectile impact on targets. Int J Impact Eng. 22(2–3):95–395.
   Web of Science ®Google Scholar
• Gupta NK, Ansari R, Gupta SK. 2003. Normal impact of ogive nosed projectiles on thin layered plates. In: Gupta NK, editor. Plasticity and Impact Mechanics, Proceedings of 8th International Symposium; Mar 16–19; New Delhi, (India): Phoenix Publishing House PVT Ltd. p. 711–722.
   Google Scholar
• Gupta NK, Madhu V. 1992. Normal and oblique impact of a kinetic energy projectile on mild steel plates. Int J Impact Eng. 12(3):333–343.
   Web of Science ®Google Scholar
• Gwaltney RC. 1968. Missile generation and protection in light water-cooled power reactor plants. Tennessee (USA): Oak Ridge National Laboratory. . Report No.: ORNL-USTC-22.
   Google Scholar
• Johnson W. 1972. Impact strength of materials. London and Crane Russak, New York (USA): Edward Arnold.
   Google Scholar
• Johnson W. 2001. Collected works on Benjamin Robins and Charles Hutton. New Delhi (India): Phoenix Publishing House Pvt Ltd.
   Google Scholar
• Jones N, Birch RS, Duan R. 2008. Low velocity perforation of mild steel rectangular plates with projectiles having different shaped impact faces. J Press Vessel Technol. 130(3):031206-1–8.
   Web of Science ®Google Scholar
• Jones N, Birch RS. 2008a. Low velocity perforation of mild steel circular plates with projectiles having different shaped impact faces. J Press Vessel Technol. 130(3):0311205-1–11.
   Google Scholar
• Jones N, Birch RS. 2008b. On the scaling of low velocity perforation of mild steel plates. J Press Vessel Technol. 130(3):0311207-1–11.
   Google Scholar
• Jones N, Kim SB. 1997a. A study on the large ductile deformations and perforation of mild steel plates struck by a mass. part I: experimental results. J Press Vessel Technol. 119(2):178–184.
   Web of Science ®Google Scholar
• Jones N, Kim SB. 1997b. A study on the large ductile deformations and perforation of mild steel plates struck by a mass. part II: discussion. J Press Vessel Technol. 119(2):185–191.
   Web of Science ®Google Scholar
• Jones N. 1997. Dynamic inelastic failure of structures. Japan Soc. Mech. Eng. 63(616):2485–2495.
   Google Scholar
• Jones N. 2012. Structural impact. 2nd ed. Cambridge (UK): Cambridge University Press.
   Google Scholar
• Jowett J. 1986. The effects of missile impact on thin metal structures. London, UK: UKAEA SRD. . Report No.: 378.
   Google Scholar
• Langseth M, Larsen PK. 1990. Dropped objects’ plugging capacity of steel plates: an experimental investigation. Int J Impact Eng. 9(3):289–316.
   Web of Science ®Google Scholar
• Lepareux M, Jamet P, Matheron P, Lieutenant JL, Couilleaux J, Duboelle D. 1989. Experimental and numerical studies of impacts on stainless steel plates subjected to rigid missiles at low velocity. Nucl Eng Des. 115(1):105–112.
   Web of Science ®Google Scholar
• Li H, Fu MW, Lu J, Yang H. 2011. Ductile fracture: experiments and computation. Int J Plasticity. 27(2):147–180.
   Web of Science ®Google Scholar
• Liang CC, Yang, MF, Wu PW, Teng TL. 2005. Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application. Ocean Eng. 32(3–4):441–468.
   Web of Science ®Google Scholar
• Liu D, Stronge WJ. 2000. Ballistic limit of metal plates struck by blunt deformable missiles: experiments. Int J Solids Struct. 37(10):1403–1423.
   Web of Science ®Google Scholar
• Liu JH, Jones N. 1996. Shear and bending response of a rigid-perfectly plastic circular plate struck transversely by a mass. Mech Based Des Struct Mach. 24(3):361–388.
   Web of Science ®Google Scholar
• Neilson AJ. 1985. Empirical equations for the perforation of mild steel plates. Int J Impact Eng. 3(2):137–142.
   Google Scholar
• Paik JK, Won SH. 2007. On deformation and perforation of ship structures under ballistic impacts. Ships Offshore Struct. 2(3):217–226.
   Google Scholar
• Raguraman M, Deb A, Gupta NK. 2010. Semi-empirical procedures for estimation of residual velocity and ballistic limit for impact on mild steel plates by projectiles. Lat Am J Solids Struct. 7(1):63–76.
   Web of Science ®Google Scholar
• Rodriguez-Martinez JA, Pesci R, Rusinek A, Arias A, Zaera R, Pedroche DA. 2010a. Thermo-mechanical behaviour of TRIP 1000 steel sheets subjected to low velocity perforation by conical projectiles at different temperature. Int J Solids Struct. 47:1268–1284.
   Web of Science ®Google Scholar
• Rodriguez-Martinez JA, Rusinek A, Pesci R. 2010b. Experimental survey on the behaviour of AISI 304 steel sheets subjected to perforation. Thin Wall Struct. 48:966–978.
   Web of Science ®Google Scholar
• Rodriguez-Martinez JA, Rusinek A, Chevrier P, Bernier R, Arias A. 2010c. Temperature measurements on ES steel sheets subjected to perforation by hemispherical projectiles. Int J Impact Eng. 37(7):828–841.
   Web of Science ®Google Scholar
• Rusinek A, Rodriguez-Martinez JA, Zaera R, Klepaczko JR, Arias A, Sauvelet C. 2009. Experimental and numerical study on the perforation process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles. Int J Impact Eng. 36(4):565–587.
   Web of Science ®Google Scholar
• Shen WQ. 2002. A study on the failure of circular plates struck by masses. part 2: theoretical analysis for the onset of failure. Int J Impact Eng. 27(4):413–432.
   Web of Science ®Google Scholar
• Shen WQ, Rieve NO, Baharun B. 2002. A study on the failure of circular plates struck by masses. part 1: experimental results. Int J Impact Eng. 27(4):399–412.
   Web of Science ®Google Scholar
• Stronge WJ. 1985. Impact and perforation of cylindrical shells by blunt missiles. . In: Reid SR, editor. Metal forming and impact mechanics. Oxford (UK): Pergamon Press. p. 289–302.
   Google Scholar
• Teng X, Wierzbicki T. 2005. Dynamic shear plugging of beams and plates with an advancing crack. Int J Impact Eng. 31(6):667–698.
   Web of Science ®Google Scholar
• Wen HM, Jones N. 1992. Semi-empirical equations for the perforation of plates struck by a mass. . In: Bulson PS, editor. Structures under shock and impact II. London (UK): Computational Mechanics Publications, Southampton and Thomas Telford. p. 369–380.
   Google Scholar
• Wen HM, Jones N. 1994. Experimental investigation into the dynamic plastic response and perforation of a clamped circular plate struck transversely by a mass. J Mech Eng Sci. 208C:113–137.
   Google Scholar
• Wen HM, Jones N. 1996. Low velocity perforation of punch-impact-loaded metal plates. J Press Vessel Technol. 118(2):181–187.
   Web of Science ®Google Scholar
• Wen HM, Sun WH. 2010. Transition of plugging failure modes for ductile metal plates under impact by flat-nosed projectiles. Mech Based Des Struct Mach. 38:86–104.
   Web of Science ®Google Scholar
• Wenxue Y, Lanting Z, Xiaoqing M, Stronge WJ. 1983. Plate perforation by deformable projectiles – a plastic wave theory. Int J Impact Eng. 1(4):393–412.
   Google Scholar
• Zaid AIO, El-Kalay A, Travis FW. 1973. An examination of the perforation of a mild steel plate by a flat-ended cylindrical projectile. Int J Mech Sci. 15(2):129–143.
   Web of Science ®Google Scholar
• Zaid AIO, Travis FW. 1974. An examination of the effect of target thickness in the perforation of mild steel plate by a flat-ended cylindrical projectile. Int J Mech Sci. 16:373–383.
   Web of Science ®Google Scholar
• Zhou DW, Stronge WJ. 2008. Ballistic limit for oblique impact of thin sandwich panels and spaced plates. Int J Impact Eng. 35(11):1339–1354.
   Web of Science ®Google Scholar