http://orcid.org/0000-0002-4370-8661
Citations (99)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (9)
Yutao Zhang, Wurikaixi Aiyiti, Shu Du, Ru Jia & Houfeng Jiang. (2023) Design and mechanical behaviours of a novel tantalum lattice structure fabricated by SLM. Virtual and Physical Prototyping 18:1.
Read now
Read now
Bengi Yilmaz. (2023) Additive manufacturing and characterization of mathematically designed bone scaffolds based on triply periodic minimal surface lattices. Mechanics of Advanced Materials and Structures 0:0, pages 1-11.
Read now
Read now
Yong Xu, Wenhao Ding, MeiGui Chen, Haochen Du & Tian Qin. (2022) Synergistic fabrication of micro-nano bioactive ceramic-optimized polymer scaffolds for bone tissue engineering by in situ hydrothermal deposition and selective laser sintering. Journal of Biomaterials Science, Polymer Edition 33:16, pages 2104-2123.
Read now
Read now
Anatolie Timercan, Vadim Sheremetyev & Vladimir Brailovski. (2021) Mechanical properties and fluid permeability of gyroid and diamond lattice structures for intervertebral devices: functional requirements and comparative analysis. Science and Technology of Advanced Materials 22:1, pages 285-300.
Read now
Read now
C. N. Kuo, C. K. Chua, P.C. Peng, Y. W. Chen, S. L. Sing, S. Huang & Y. L. Su. (2020) Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy. Virtual and Physical Prototyping 15:1, pages 120-129.
Read now
Read now
Jiankai Yang, Dongdong Gu, Kaijie Lin, Chenglong Ma, Rui Wang, Hongmei Zhang & Meng Guo. (2020) Laser 3D printed bio-inspired impact resistant structure: failure mechanism under compressive loading. Virtual and Physical Prototyping 15:1, pages 75-86.
Read now
Read now
Huangchao Yu, Jiaqi Huang, Bin Zou, Wen Shao & Jikai Liu. (2020) Stress-constrained shell-lattice infill structural optimisation for additive manufacturing. Virtual and Physical Prototyping 15:1, pages 35-48.
Read now
Read now
Amir Mahyar Khorasani, Ian Gibson, AmirHossein Ghasemi & Alireza Ghaderi. (2019) A comprehensive study on variability of relative density in selective laser melting of Ti-6Al-4V. Virtual and Physical Prototyping 14:4, pages 349-359.
Read now
Read now
Jikai Liu, Yufan Zheng, Rafiq Ahmad, Jinyuan Tang & Yongsheng Ma. (2019) Minimum length scale constraints in multi-scale topology optimisation for additive manufacturing. Virtual and Physical Prototyping 14:3, pages 229-241.
Read now
Read now
Articles from other publishers (90)
Matthew S. Dargusch, Nicolas Soro, Ali Gokhan Demir, Jeffrey Venezuela, Qiang Sun, Yuan Wang, Abdalla Abdal-hay, Aya Q. Alali, Saso Ivanovski, Barbara Previtali & Damon Kent. (2024) Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces. Smart Materials in Medicine 5:1, pages 127-139.
Crossref
Crossref
MC Salama, F Alves, L Reis, AM Deus, MB Silva, C Santos, MJ Carmezim & MF Vaz. (2023) Mechanical and corrosion performance of biodegradable iron porous structures. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 238:1, pages 204-220.
Crossref
Crossref
Christopher W. Haney & Hector R. Siller. (2023) Properties of Hyper-Elastic-Graded Triply Periodic Minimal Surfaces. Polymers 15:23, pages 4475.
Crossref
Crossref
Marco Sauermoser-Yri, Naresh Veldurthi, Christoph Hubertus Wölfle, Preben Johnsen Svartvatn, Svenn Ove Flo Hoem, Markus Joakim Lid, Robert Bock, James W. Palko & Jan Torgersen. (2023) On the porosity-dependent permeability and conductivity of triply periodic minimal surface based porous media. Journal of Materials Research and Technology 27, pages 585-599.
Crossref
Crossref
Javid Zare Shiadehi & Abbas Zolfaghari. (2023) Design parameters of a Kagome lattice structure constructed by fused deposition modeling: a response surface methodology study. Iranian Polymer Journal 32:9, pages 1089-1100.
Crossref
Crossref
Chetana Madhukar Suryawanshi, Samrat Sagar, Ravi Bhallamudi & Sushil Mishra. (2023) Effective design and mechanical response of Gyroid lattice scaffold for orthopedic implants. Manufacturing Letters 35, pages 493-501.
Crossref
Crossref
Changhui Song, Jiaqi Chen, Haoyang Lei, Zhaobin Yang, Zhengtai Deng, Yueyue Li, Jianhua Wang, Yongqiang Yang & Changjun Han. (2023) Radial gradient design enabling additively manufactured low-modulus gyroid tantalum structures. International Journal of Mechanical Sciences, pages 108710.
Crossref
Crossref
Nurul Husna Mohd Yusoff, Chien Hwa Chong, Voon Loong Wong, Kean How Cheah & Yoke Kin Wan. (2023) The influence of structural topology of additively manufactured PEGDA monolith on adsorption performance for textile wastewater treatment. Asia-Pacific Journal of Chemical Engineering.
Crossref
Crossref
Ze Zhao, Zhige Wu, Dingrou Yao, Yuan Wei & Junchao Li. (2023) Mechanical properties and failure mechanisms of polyamide 12 gradient scaffolds developed with selective laser sintering. Journal of the Mechanical Behavior of Biomedical Materials 143, pages 105915.
Crossref
Crossref
Fabian Günther, Stefan Pilz, Franz Hirsch, Markus Wagner, Markus Kästner, Annett Gebert & Martina Zimmermann. (2023) Shape optimization of additively manufactured lattices based on triply periodic minimal surfaces. Additive Manufacturing 73, pages 103659.
Crossref
Crossref
Raffaele De Biasi, Simone Murchio, Elia Sbettega, Simone Carmignato, Valerio Luchin & Matteo Benedetti. (2023) Efficient optimization framework for L-PBF fatigue enhanced Ti6Al4V lattice component. Materials & Design 230, pages 111975.
Crossref
Crossref
Congjian Lin, Yuan‐Fang Zhang, Dingjie Lu, Arlindo Silva, Zhuangjian Liu & Hui Ying Yang. (2023) Low‐Temperature Resistant Stretchable Micro‐Supercapacitor Based on 3D Printed Octet‐Truss Design. Small 19:23.
Crossref
Crossref
Fares Alawwa, Muhammed Saeed, Rami Homsi, Huaitao Zhu, Abdallah S. Berrouk, Mohamad Khalil, Gongnan Xie & Yasser Al Wahedi. (2023) Thermohydraulic performance comparison of 3D printed circuit heatsinks with conventional integral fin heatsinks. Applied Thermal Engineering 226, pages 120356.
Crossref
Crossref
Llion Marc Evans, Emrah Sözümert, Bethany E. Keenan, Charles E. Wood & Anton du Plessis. (2023) A Review of Image-Based Simulation Applications in High-Value Manufacturing. Archives of Computational Methods in Engineering 30:3, pages 1495-1552.
Crossref
Crossref
Christopher W. Haney & Hector R. Siller. (2023) Anthropo-fidelic behavior of elastic-plastic lattice structures. Polymer Testing 120, pages 107970.
Crossref
Crossref
Charles M. Dwyer, Jose G. Carrillo, Jose Angel Diosdado De la Peña, Carolyn Carradero Santiago, Eric MacDonald, Jerry Rhinehart, Reed M. Williams, Mark Burhop, Bharat Yelamanchi & Pedro Cortes. (2023) Impact Performance of 3D Printed Spatially Varying Elastomeric Lattices. Polymers 15:5, pages 1178.
Crossref
Crossref
Fabio Distefano, Salvatore Pasta & Gabriella Epasto. (2023) Titanium Lattice Structures Produced via Additive Manufacturing for a Bone Scaffold: A Review. Journal of Functional Biomaterials 14:3, pages 125.
Crossref
Crossref
Fabio Distefano, Rosalia Mineo & Gabriella Epasto. (2023) Mechanical behaviour of a novel biomimetic lattice structure for bone scaffold. Journal of the Mechanical Behavior of Biomedical Materials 138, pages 105656.
Crossref
Crossref
Aniket K. Dutt, G. K. Bansal, S. Tripathy, K. Gopala Krishna, V. C. Srivastava & S. Ghosh Chowdhury. (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals 76:2, pages 335-345.
Crossref
Crossref
Chan Kyu Kim, Dae‐Won Cho, Seok Kim, Sang Woo Song, Kang Myung Seo & Young Tae Cho. (2022) High‐Throughput Metal 3D Printing Pen Enabled by a Continuous Molten Droplet Transfer. Advanced Science 10:6.
Crossref
Crossref
Abhisek Gupta, Masud Rana, Nitesh Mondal, Apurba Das, Amit Karmakar & Amit Roy Chowdhury. (2023) DESIGNING OF DIFFERENT TYPES OF GYROID SCAFFOLD ARCHITECTURE TO ACHIEVE PATIENT-SPECIFIC OSSEOINTEGRATION FRIENDLY MECHANICAL ENVIRONMENT. International Journal for Multiscale Computational Engineering 21:4, pages 1-15.
Crossref
Crossref
Blagoja Nestorovski, Elena Angeleska & Nikola Avramov. (2023) Load carrying capacities of gears with a lattice structure body. MATEC Web of Conferences 387, pages 02001.
Crossref
Crossref
A. Eljihad, M. Nassraoui & O. Bouksour. 2023. Proceedings of CASICAM 2022. Proceedings of CASICAM 2022
43
50
.
Haonan Li, Weidong Yang, Qianchao Ma, Zhihan Qian & Li Yang. (2022) Specific Sensitivity Analysis and Imitative Full Stress Method for Optimal BCCZ Lattice Structure by Additive Manufacturing. Crystals 12:12, pages 1844.
Crossref
Crossref
Asha Viswanath, Kamran A. Khan & Imad Barsoum. (2022) Design of novel isosurface strut-based lattice structures: Effective stiffness, strength, anisotropy and fatigue properties. Materials & Design 224, pages 111293.
Crossref
Crossref
Uzair Sajjad, Tauseef-ur Rehman, Mubasher Ali, Cheol Woo Park & Wei-Mon Yan. (2022) Manufacturing and potential applications of lattice structures in thermal systems: A comprehensive review of recent advances. International Journal of Heat and Mass Transfer 198, pages 123352.
Crossref
Crossref
Rajdeep Bhattacharyya, Masud Rana, Abhisek Gupta, Dibyendu Dutta Majumdar, Jyotsna Dutta Majumdar & Amit Roy Chowdhury. (2022) Modelling of Porous Titanium and Understanding Its Mechanical Behavior Using Micro-Computed Tomography. Journal of Materials Engineering and Performance 31:10, pages 8160-8168.
Crossref
Crossref
Seyed Ataollah Naghavi, Maryam Tamaddon, Arsalan Marghoub, Katherine Wang, Behzad Bahrami Babamiri, Kavan Hazeli, Wei Xu, Xin Lu, Changning Sun, Liqing Wang, Mehran Moazen, Ling Wang, Dichen Li & Chaozong Liu. (2022) Mechanical Characterisation and Numerical Modelling of TPMS-Based Gyroid and Diamond Ti6Al4V Scaffolds for Bone Implants: An Integrated Approach for Translational Consideration. Bioengineering 9:10, pages 504.
Crossref
Crossref
Mahdi Jaber, Patrina S. P. Poh, Georg N. Duda & Sara Checa. (2022) PCL strut-like scaffolds appear superior to gyroid in terms of bone regeneration within a long bone large defect: An in silico study. Frontiers in Bioengineering and Biotechnology 10.
Crossref
Crossref
Bankole I. Oladapo, Joseph F. Kayode, Panagiotis Karagiannidis, Nida Naveed, Hamid Mehrabi & Kolawole O. Ogundipe. (2022) Polymeric composites of cubic-octahedron and gyroid lattice for biomimetic dental implants. Materials Chemistry and Physics 289, pages 126454.
Crossref
Crossref
K. Somlo, S.S. Chauhan, C.F. Niordson & K. Poulios. (2022) Uniaxial tensile behaviour of additively manufactured elastically isotropic truss lattices made of 316L. International Journal of Solids and Structures 246-247, pages 111599.
Crossref
Crossref
Deepak Sharma & Somashekhar S. Hiremath. (2022) Compressive and flexural properties of the novel lightweight tailored bio-inspired structures. Thin-Walled Structures 174, pages 109169.
Crossref
Crossref
Anton du Plessis, Nima Razavi, Matteo Benedetti, Simone Murchio, Martin Leary, Marcus Watson, Dhruv Bhate & Filippo Berto. (2022) Properties and applications of additively manufactured metallic cellular materials: A review. Progress in Materials Science 125, pages 100918.
Crossref
Crossref
Deepak Sharma & Somashekhar S. Hiremath. (2022) Engineering the failure path with bird feather inspired novel cellular structures. Engineering Fracture Mechanics 264, pages 108350.
Crossref
Crossref
H.M.A. Kolken, S.J.P. Callens, M.A. Leeflang, M.J. Mirzaali & A.A. Zadpoor. (2022) Merging strut-based and minimal surface meta-biomaterials: Decoupling surface area from mechanical properties. Additive Manufacturing 52, pages 102684.
Crossref
Crossref
Inderjot Kaur & Prashant Singh. (2022) Direct Pore-Scale Simulations of Fully Periodic Unit Cells of Different Regular Lattices. Journal of Heat Transfer 144:2.
Crossref
Crossref
Isami NITTA, Ryota TAKAHASHI & Yosuke TSUKIYAMA. (2022) Mechanical behaviour of porous metals fabricated by low-power selective laser melting. Journal of Advanced Mechanical Design, Systems, and Manufacturing 16:5, pages JAMDSM0047-JAMDSM0047.
Crossref
Crossref
Patrich Ferretti, Elena Fusari, Giulia Alessandri, Marco Freddi & Daniela Francia. (2023) Stress-Based Lattice Structure Design for a Motorbike Application. F1000Research 11, pages 1162.
Crossref
Crossref
Patrich Ferretti, Elena Fusari, Giulia Alessandri, Marco Freddi & Daniela Francia. (2022) 3D printed custom gas cam for race bike application using Progrip® lock on grips mod.708. F1000Research 11, pages 1162.
Crossref
Crossref
Fabio Distefano, Eugenio Guglielmino, Rosalia Mineo & Gabriella Epasto. (2022) Mechanical and morphological characterization of BCC - derived unit cells for biomedical devices. Procedia Structural Integrity 41, pages 470-485.
Crossref
Crossref
C.N. Kuo, C.T. Shih & J.N. Aoh. (2022) Development of laser powder bed fusion scalmalloy assisted by integrated computational materials engineering. Materials Today: Proceedings 70, pages 718-721.
Crossref
Crossref
Ganesh Kumar Sharma & Vikas Kukshal. (2022) Assessment of mechanical behaviour of functionally graded biomaterials using finite element method. Materials Today: Proceedings 62, pages 7487-7493.
Crossref
Crossref
M Dharmaraj, K.V Satheesh kumar & C Sridhar. (2022) Crashworthiness unit cell design investigation for energy absorption analysis. Materials Today: Proceedings 50, pages 1282-1290.
Crossref
Crossref
Chenxi Lu, Chi Zhang, Pin Wen & Fei Chen. (2021) Mechanical behavior of Al–Si10–Mg gyroid surface with variable topological parameters fabricated via laser powder bed fusion. Journal of Materials Research and Technology 15, pages 5650-5661.
Crossref
Crossref
Liang-Yu Chen, Shun-Xing Liang, Yujing Liu & Lai-Chang Zhang. (2021) Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges. Materials Science and Engineering: R: Reports 146, pages 100648.
Crossref
Crossref
Zandré Germishuys & Marena Manley. (2021) X-ray micro-computed tomography evaluation of bubble structure of freeze-dried dough and foam properties of bread produced from roasted wheat flour. Innovative Food Science & Emerging Technologies 73, pages 102766.
Crossref
Crossref
Luis Lisandro Lopez Taborda, Heriberto Maury & Jovanny Pacheco. (2021) Design for additive manufacturing: a comprehensive review of the tendencies and limitations of methodologies. Rapid Prototyping Journal 27:5, pages 918-966.
Crossref
Crossref
Negar RajabiAli RezaeiMahshid KharazihaHamid Reza Bakhsheshi-RadHongrong LuoSeeram RamaKrishnaFilippo Berto. (2021) Recent Advances on Bioprinted Gelatin Methacrylate-Based Hydrogels for Tissue Repair. Tissue Engineering Part A 27:11-12, pages 679-702.
Crossref
Crossref
Y.C. Wu, C.N. Kuo, T.H. Wu, T.Y. Liu, Y.W. Chen, X.H. Guo & J.C. Huang. (2021) Empirical rule for predicting mechanical properties of Ti-6Al-4V bone implants with radial-gradient porosity bionic structures. Materials Today Communications 27, pages 102346.
Crossref
Crossref
Elham Davoodi, Hossein Montazerian, Reza Esmaeilizadeh, Ali Ch. Darabi, Armin Rashidi, Javad Kadkhodapour, Hamid Jahed, Mina Hoorfar, Abbas S. Milani, Paul S. Weiss, Ali Khademhosseini & Ehsan Toyserkani. (2021) Additively Manufactured Gradient Porous Ti–6Al–4V Hip Replacement Implants Embedded with Cell-Laden Gelatin Methacryloyl Hydrogels. ACS Applied Materials & Interfaces 13:19, pages 22110-22123.
Crossref
Crossref
Nur Syahirah Mustafa, Nor Hasrul Akhmal, Sudin Izman, Mat Hussin Ab Talib, Ashrul Ishak Mohamad Shaiful, Mohd Nazri Bin Omar, Nor Zaiazmin Yahaya & Suhaimi Illias. (2021) Application of Computational Method in Designing a Unit Cell of Bone Tissue Engineering Scaffold: A Review. Polymers 13:10, pages 1584.
Crossref
Crossref
Sophie E. Mountcastle, Nina Vyas, Victor M. Villapun, Sophie C. Cox, Sara Jabbari, Rachel L. Sammons, Richard M. Shelton, A. Damien Walmsley & Sarah A. Kuehne. (2021) Biofilm viability checker: An open-source tool for automated biofilm viability analysis from confocal microscopy images. npj Biofilms and Microbiomes 7:1.
Crossref
Crossref
Khaled G. Mostafa, Guilherme A. Momesso, Xiuhui Li, David S. Nobes & Ahmed J. Qureshi. (2021) Dual Graded Lattice Structures: Generation Framework and Mechanical Properties Characterization. Polymers 13:9, pages 1528.
Crossref
Crossref
P. N. Kilina, L. D. Sirotenko, E. V. Matygullina & N. D. Ogleznev. (2021) Creation of Cellular Structures with Specified Mechanical Properties by Selective Laser Melting. Russian Engineering Research 41:5, pages 463-465.
Crossref
Crossref
Robert C. Foster, Scott Vander Wiel, Veronica Anghel & Curt Bronkhorst. (2021) Towards random generation of microstructures of spatially varying materials from orthogonal sections. Computational Materials Science 192, pages 110313.
Crossref
Crossref
Anton Du Plessis, Bharat Yelamanchi, Christian Fischer, James Miller, Chad Beamer, Kirk Rogers, Pedro Cortes, Johan Els & Eric MacDonald. (2021) Productivity enhancement of laser powder bed fusion using compensated shelled geometries and hot isostatic pressing. Advances in Industrial and Manufacturing Engineering 2, pages 100031.
Crossref
Crossref
H.M.A. Kolken, A. Fontecha Garcia, A. Du Plessis, C. Rans, M.J. Mirzaali & A.A. Zadpoor. (2021) Fatigue performance of auxetic meta-biomaterials. Acta Biomaterialia 126, pages 511-523.
Crossref
Crossref
Sze Yi Mak, Kwong Leong Tam, Ching Hang Bob Yung & Wing Fung Edmond Yau. (2021) Hybrid Metal 3D Printing for Selective Polished Surface. Materials Science Forum 1027, pages 136-140.
Crossref
Crossref
Philip Sperling, Anton du Plessis & Gerd Schwaderer. (2021) Challenges and Approaches for Metrology of Additive Manufactured Lattice Structures by Industrial X-Ray Computed Tomography. Advanced Materials Research 1161, pages 131-136.
Crossref
Crossref
Dalia Mahmoud, Kassim S. Al-Rubaie & Mohamed A. Elbestawi. (2021) The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants. International Journal of Mechanical Sciences 193, pages 106180.
Crossref
Crossref
Hao Chen, Yang Liu, Chenyu Wang, Aobo Zhang, Bingpeng Chen, Qing Han & Jincheng Wang. (2021) Design and properties of biomimetic irregular scaffolds for bone tissue engineering. Computers in Biology and Medicine 130, pages 104241.
Crossref
Crossref
Yingang Liu, Jingqi Zhang, Qiyang Tan, Yu Yin, Miaoquan Li & Ming-Xing Zhang. (2021) Mechanical performance of simple cubic architected titanium alloys fabricated via selective laser melting. Optics & Laser Technology 134, pages 106649.
Crossref
Crossref
Chunze Yan, Liang Hao, Lei Yang, Ahmed Yussuf Hussein, Philippe G. Young, Zhaoqing Li & Yan Li. 2021. Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting. Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting
219
281
.
Mohammad J. Mirzaali, Abolfazl Azarniya, Saeed Sovizi, Jie Zhou & Amir A. Zadpoor. 2021. Fundamentals of Laser Powder Bed Fusion of Metals. Fundamentals of Laser Powder Bed Fusion of Metals
423
465
.
Shuai Ma, Qian Tang, Qixiang Feng, Jun Song, Ying Liu & Rossitza Setchi. 2021. Sustainable Design and Manufacturing 2020. Sustainable Design and Manufacturing 2020
173
181
.
Victor M. Villapún, Luke N. Carter, Nan Gao, Owen Addison, Mark A. Webber, Duncan E.T. Shepherd, James W. Andrews, Morgan Lowther, Steven Avery, Sarah J. Glanvill, Liam M. Grover & Sophie Cox. (2020) A design approach to facilitate selective attachment of bacteria and mammalian cells to additively manufactured implants. Additive Manufacturing 36, pages 101528.
Crossref
Crossref
Lorenzo Guariento, Francesco Buonamici, Antonio Marzola, Yary Volpe & Lapo Governi. (2020) Graded Gyroid Structures for Load Bearing Orthopedic Implants. Graded Gyroid Structures for Load Bearing Orthopedic Implants.
Roland Chen, Robert C. Chang, Bruce Tai, Yong Huang, Burak Ozdoganlar, Wei Li & Albert Shih. (2020) Biomedical Manufacturing: A Review of the Emerging Research and Applications. Journal of Manufacturing Science and Engineering 142:11.
Crossref
Crossref
Junchao Li, Ze Zhao, Ran Yan & Yanan Yang. (2020) Mechanical properties of graded scaffolds developed by curve interference coupled with selective laser sintering. Materials Science and Engineering: C 116, pages 111181.
Crossref
Crossref
Shuai Ma, Qian Tang, Xiaoxiao Han, Qixiang Feng, Jun Song, Rossitza Setchi, Ying Liu, Yang Liu, Athanasios Goulas, Daniel S. Engstrøm, Yau Yau Tse & Ni Zhen. (2020) Manufacturability, Mechanical Properties, Mass-Transport Properties and Biocompatibility of Triply Periodic Minimal Surface (TPMS) Porous Scaffolds Fabricated by Selective Laser Melting. Materials & Design 195, pages 109034.
Crossref
Crossref
Chen Pan, Yafeng Han & Jiping Lu. (2020) Design and Optimization of Lattice Structures: A Review. Applied Sciences 10:18, pages 6374.
Crossref
Crossref
Lei Yang, Changjun Han, Hongzhi Wu, Liang Hao, Qingsong Wei, Chunze Yan & Yusheng Shi. (2020) Insights into unit cell size effect on mechanical responses and energy absorption capability of titanium graded porous structures manufactured by laser powder bed fusion. Journal of the Mechanical Behavior of Biomedical Materials 109, pages 103843.
Crossref
Crossref
Li Wu, Longhe Xu, Xinxin Li & Minglong Feng. (2019) Fuzzy Evaluation of Rapid Prototyping Methods for Latticed Silicone Pieces. Silicon 12:8, pages 1995-2004.
Crossref
Crossref
Hao Chen, Qing Han, Chenyu Wang, Yang Liu, Bingpeng Chen & Jincheng Wang. (2020) Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review. Frontiers in Bioengineering and Biotechnology 8.
Crossref
Crossref
Asliah Seharing, Abdul Hadi Azman & Shahrum Abdullah. (2020) Finite element analysis of gradient lattice structure patterns for bone implant design. International Journal of Structural Integrity 11:4, pages 535-545.
Crossref
Crossref
Y. Ibrahim, C. M. Davies, C. Maharaj, Z. Li, J. P. Dear & P. A. Hooper. (2020) Post-yield performance of additive manufactured cellular lattice structures. Progress in Additive Manufacturing 5:2, pages 211-220.
Crossref
Crossref
Luke N. Carter, Owen Addison, Nashwan Naji, Peter Seres, Alan H. Wilman, Duncan E.T. Shepherd, Liam Grover & Sophie Cox. (2020) Reducing MRI susceptibility artefacts in implants using additively manufactured porous Ti-6Al-4V structures. Acta Biomaterialia 107, pages 338-348.
Crossref
Crossref
Carolyn Carradero Santiago, Christiaan Randall-Posey, Andrei-Alexandru Popa, Lars Duggen, Brian Vuksanovich, Pedro Cortes & Eric Macdonald. (2020) 3D Printed Elastomeric Lattices With Embedded Deformation Sensing. IEEE Access 8, pages 41394-41402.
Crossref
Crossref
Dg. H. Kassim, A. Putra, M. F. S. Che Hamid & Mohd Rizal Alkahari. 2020. Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials. Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials
69
79
.
Dalia Mahmoud, M. A. Elbestawi & Bosco Yu. (2019) Process–Structure–Property Relationships in Selective Laser Melting of Porosity Graded Gyroids. Journal of Medical Devices 13:3.
Crossref
Crossref
Hui Mei, Ruoshi Zhao, Yize Xia, Jie Du, Xin Wang & Laifei Cheng. (2019) Ultrahigh strength printed ceramic lattices. Journal of Alloys and Compounds 797, pages 786-796.
Crossref
Crossref
X. Ren, L. Xiao & Z. Hao. (2019) Multi-property cellular material design approach based on the mechanical behaviour analysis of the reinforced lattice structure. Materials & Design 174, pages 107785.
Crossref
Crossref
Klaudio Bari & Arun Arjunan. (2019) Extra low interstitial titanium based fully porous morphological bone scaffolds manufactured using selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials 95, pages 1-12.
Crossref
Crossref
Zhichao Dong, Yabo Liu, Weijie Li & Jun Liang. (2019) Orientation dependency for microstructure, geometric accuracy and mechanical properties of selective laser melting AlSi10Mg lattices. Journal of Alloys and Compounds 791, pages 490-500.
Crossref
Crossref
Rinoj Gautam & Sridhar Idapalapati. (2019) Performance of strut-reinforced Kagome truss core structure under compression fabricated by selective laser melting. Materials & Design 164, pages 107541.
Crossref
Crossref
Junyu Fu, Jiaqi Huang & Jikai Liu. (2019) Topology Optimization With Selective Problem Setups. IEEE Access 7, pages 180846-180855.
Crossref
Crossref
Xiang-Yu Zhang, Gang Fang, Sander Leeflang, Amir A. Zadpoor & Jie Zhou. (2019) Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials. Acta Biomaterialia 84, pages 437-452.
Crossref
Crossref
I. Yadroitsava, A. du Plessis & I. Yadroitsev. 2019. Titanium for Consumer Applications. Titanium for Consumer Applications
197
233
.
Y. Ibrahim, Z. Li, C.M. Davies, C. Maharaj, J.P. Dear & P.A. Hooper. (2018) Acoustic resonance testing of additive manufactured lattice structures. Additive Manufacturing 24, pages 566-576.
Crossref
Crossref
Anton Du Plessis, Dean-Paul Kouprianoff, Ina Yadroitsava & Igor Yadroitsev. (2018) Mechanical Properties and In Situ Deformation Imaging of Microlattices Manufactured by Laser Based Powder Bed Fusion. Materials 11:9, pages 1663.
Crossref
Crossref