Advanced search
Publication Cover
Arab Journal of Basic and Applied Sciences Volume 26, 2019 - Issue 1
Submit an article Journal homepage
3,520
Views
46
CrossRef citations to date
0
Altmetric
Review Article

Applicability of metallic reinforcements for mechanical performance enhancement in metal matrix composites: a review

Kenneth Kanayo AlanemeDepartment of Metallurgical and Materials Engineering, Federal University of Technology, Akure, Nigeria; Correspondence[email protected]
,
Eloho Anita OkoteteDepartment of Metallurgical and Materials Engineering, Federal University of Technology, Akure, Nigeria;
,
Adetomilola Victoria FajemisinDepartment of Metallurgical and Materials Engineering, Federal University of Technology, Akure, Nigeria;
&
Michael Oluwatosin BodunrinDepartment of Metallurgical and Materials Engineering, Federal University of Technology, Akure, Nigeria; ;School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg, South AfricaORCID Iconhttp://orcid.org/0000-0001-6736-4771
ORCID Icon
Pages 311-330 | Received 03 Dec 2018, Accepted 28 May 2019, Published online: 27 Jun 2019

Citations (46)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

Ramakrishna Vikas Sadanand, Sathyashankara Sharma & P. R. Prabhu. (2023) Experimental analysis of hardness and tensile characteristics of copper reinforced AA6061 stir cast composites subjected to thermal and deformation assisted heat treatments. Cogent Engineering 10:1.
Read now

Articles from other publishers (45)

K. Singh, V. Khanna, A. Rosenkranz, V. Chaudhary, Sonu, G. Singh & S. Rustagi. (2023) Panorama of physico-mechanical engineering of graphene-reinforced copper composites for sustainable applications. Materials Today Sustainability 24, pages 100560.
Crossref
Amarjit Singh, Jarnail Singh, Manoj Kumar Sinha & Ravi Kumar. (2023) Ferrous-metal matrix composites: a review on status, scope and challenges. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:6, pages 2807-2829.
Crossref
Kenneth Kanayo Alaneme, Sodiq Abiodun Kareem & Michael Oluwatosin Bodunrin. (2023) Hyperbolic–sine constitutive model determined hot deformation mechanisms and workability response of Al–Zn/Cu and Al–Zn/SiC based composites. Results in Engineering 19, pages 101255.
Crossref
Sodiq Abiodun Kareem, Justus Uchenna Anaele, Emmanuel Omosegunfunmi Aikulola, Olajesu Favor Olanrewaju, Babatunde Olamide Omiyale, Michael Oluwatosin Bodunrin & Kenneth Kanayo Alaneme. (2023) Hot deformation behaviour, constitutive model description, and processing map analysis of superalloys: An overview of nascent developments. Journal of Materials Research and Technology 26, pages 8624-8669.
Crossref
Dina V. Dudina, Vyacheslav I. Kvashnin, Boris B. Bokhonov, Mikhail A. Legan, Aleksey N. Novoselov, Yuliya N. Bespalko, Alberto Moreira JorgeJr.Jr., Guilherme Y. Koga, Arina V. Ukhina, Alexandr A. Shtertser, Alexander G. Anisimov & Konstantinos Georgarakis. (2023) Metallic Iron or a Fe-Based Glassy Alloy to Reinforce Aluminum: Reactions at the Interface during Spark Plasma Sintering and Mechanical Properties of the Composites. Journal of Composites Science 7:7, pages 302.
Crossref
Nur Farah Bazilah Wakhi Anuar, Mohd Shukor Salleh, Mohd Zaidi Omar, Wan Fathul Hakim W. Zamri, Afifah Md Ali & Saziana Samat. (2023) Wear properties of graphene-reinforced aluminium metal matrix composite: A review. REVIEWS ON ADVANCED MATERIALS SCIENCE 62:1.
Crossref
Vahid Norouzifard & Amir Talebi. (2023) Fractographic Characterization of Steel Nanoparticulates-Reinforced Copper Matrix Composites Subjected to Static, Cyclic, and Dynamic Mechanical Loading. Journal of Materials Engineering and Performance.
Crossref
K. Balamurugan, Vigneshwaran Shanmugam, Geetha Palani, R. Sundarakannan, T. Sathish, Emanoil Linul, Sher Afghan Khan & Mohammad Asif. (2023) Effect of TiC/RHA on solid particle erosion of Al6061 hybrid composites fabricated through a 2-step ultrasonic-assisted stir casting process. Journal of Materials Research and Technology 25, pages 4888-4900.
Crossref
Bassiouny Saleh, Aibin Ma, Reham Fathi, N. Radhika, Guangheng Yang & Jinghua Jiang. (2023) Optimized mechanical properties of magnesium matrix composites using RSM and ANN. Materials Science and Engineering: B 290, pages 116303.
Crossref
Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Bashar Dan-asabe & Adetayo Abdulmumin Adebisi. (2023) Manufacturing and optimization of the effect of casting process parameters on the compressive strength of aluminum/pumice/carbonated coal hybrid composites: Taguchi and regression analysis approach. The International Journal of Advanced Manufacturing Technology 125:7-8, pages 3401-3414.
Crossref
Ramakrishna Vikas Sadanand, Sathyashankara Sharma & P.R. Prabhu. (2023) Mechanical characterization of low temperature thermomechanical treated AA6061-silica sand composites. Materials Today: Proceedings.
Crossref
Murtala Dankulu Hassan, Mu'azu Musa, Mannir Ibrahim Tarno, Salihu Sani & Naif Mohammed Lawal. (2023) THE CORRELATION OF MICROSTRUCTURE, AND MECHANICAL PROPERTIES OF NOVEL Fe3O4-(AuTe2) –REINFORCED ALUMINIUM MATRIX COMPOSITE PRODUCED VIA RECRYSTALLIZATION ROUTE. FUDMA JOURNAL OF SCIENCES 6:6, pages 22-30.
Crossref
Yared G. Zena, Mulugeta H. Woldemariam & Ermias G. Koricho. (2023) Nano-additives and their effects on the microwave absorptions and mechanical properties of the composite materials. Manufacturing Review 10, pages 8.
Crossref
Yogesh Kumar Kumawat, Rishabh Sehgal, Irfan Ayoub, Rakesh Sehgal & Vijay Kumar. 2023. Nanoparticles Reinforced Metal Nanocomposites. Nanoparticles Reinforced Metal Nanocomposites 53 87 .
Konstantinos Georgarakis, Dina V. Dudina & Vyacheslav I. Kvashnin. (2022) Metallic Glass-Reinforced Metal Matrix Composites: Design, Interfaces and Properties. Materials 15:23, pages 8278.
Crossref
R. Seetharam, S. Kanmani Subbu, M. J. Davidson, K. R. Ramkumar & Pagidi Madhukar. (2022) Influence of Reinforcement Particles on Dynamically Recrystallized Grain of Hot Upset Sintered Al-B4C Composites. Journal of Materials Engineering and Performance 31:11, pages 9083-9096.
Crossref
Ronghua Chen, Bochuan Li & Kang Xu. (2022) Effect of particle morphology on fatigue crack propagation mechanism of TiB2-reinforced steel matrix composites. Engineering Fracture Mechanics 274, pages 108752.
Crossref
Kenneth K. Alaneme, Oyediran Mayokun, Michael O. Bodunrin, Saheed A. Babalola, Adeolu A. Adediran & Kayode J. Olaleye. (2022) On the applicability of Cu–17Zn–7Al–0.3Ni shape memory alloy particles as reinforcement in aluminium-based composites: Structural and mechanical behaviour considerations. Journal of the Mechanical Behavior of Materials 31:1, pages 663-672.
Crossref
Chika Oliver Ujah, Daramy Vandi Von Kallon, Daniel O. Aikhuele & Victor Sunday Aigbodion. (2022) Advanced Composite Materials: A Panacea for Improved Electricity Transmission. Applied Sciences 12:16, pages 8291.
Crossref
Nikhilesh Singh, R M Belokar & R S Walia. (2021) Experimental Investigation on Microstructural and Mechanical Attributes of Al 7075-T6/SiC/CR/MoS2 Based Green Hybrid Composite Via Advanced Vacuum-Sealed Bottom Pouring Stir Casting. Silicon 14:13, pages 7643-7665.
Crossref
Anshu Anand & Sanjiv Kumar Tiwari. (2022) Recent advancements in the production of hybrid metal matrix composites (HMMC): A Review. IOP Conference Series: Materials Science and Engineering 1248:1, pages 012087.
Crossref
G.S. Hikku, C. Arthi, R.B. Jeen Robert, K. Jeyasubramanian & R. Murugesan. (2022) Calcium phosphate conversion technique: A versatile route to develop corrosion resistant hydroxyapatite coating over Mg/Mg alloys based implants. Journal of Magnesium and Alloys 10:7, pages 1821-1845.
Crossref
Ramezanali Farajollahi, Hamed Jamshidi Aval & Roohollah Jamaati. (2022) Evaluating of the microstructure, texture, and mechanical properties of AA2024-Al3NiCu composites fabricated by the stir casting process. CIRP Journal of Manufacturing Science and Technology 37, pages 204-218.
Crossref
Ramezanali Farajollahi, Hamed Jamshidi Aval & Roohollah Jamaati. (2022) Effect of friction surfacing parameters on the microstructural, mechanical properties, and wear characteristic of Al-Cu-Mg alloy coating reinforced by nickel aluminide. Archives of Civil and Mechanical Engineering 22:2.
Crossref
Sultan Althahban, Yosef Jazaa, Omar Bafakeeh, Abdullah S. Alomari, Hossam El-Din M. Sallam & Mahmoud Atta. (2022) The Effect of Reinforcement Preheating Temperatures on Tribological Behavior of Advanced Quranic Metal-Matrix Composites (QMMC). Materials 15:2, pages 659.
Crossref
Udochukwu Samuel Ikele, Kenneth Kanayo Alaneme & Akinlabi Oyetunji. (2022) Mechanical behaviour of stir cast aluminum matrix composites reinforced with silicon carbide and palm kernel shell ash. Manufacturing Review 9, pages 12.
Crossref
Yi-dan Fan, Kun-kun Deng, Cui-ju Wang, Kai-bo Nie & Quan-xin Shi. (2022) Work hardening and softening behavior of Mg–Zn–Ca alloy influenced by deformable Ti particles. Materials Science and Engineering: A 833, pages 142336.
Crossref
Amarjit Singh, Anupam Anand, Jarnail Singh, Malkeet Singh, Kaushal Kumar, Prabhakar Bhandari, V.K. Srivastava, Ajay Singh & Manoj Kumar Sinha. (2022) Suitability of turning and grinding steel chips to synthesize metal matrix composite via powder metallurgy route. Materials Today: Proceedings 69, pages 215-219.
Crossref
Theo Oluwasegun Joshua, Kenneth Kanayo Alaneme, Michael Oluwatosin Bodunrin & Joseph A. Omotoyinbo. (2022) Corrosion and wear characteristics of Al-Zn based composites reinforced with martensitic stainless steel and silicon carbide particulates. Materials Today: Proceedings 62, pages S127-S132.
Crossref
Kenneth Kanayo Alaneme & Emmanuel O. Aikulola. (2022) Mechanical and damping behaviour of Al-20Zn based composites reinforced with recycled steel particles. Materials Today: Proceedings 62, pages S115-S121.
Crossref
Nikhilesh Singh, R. M. Belokar & R. S. Walia. (2020) A Critical Review on Advanced Reinforcements and Base Materials on Hybrid Metal Matrix Composites. Silicon 14:2, pages 335-358.
Crossref
Muntadher Sabah Msebawi, Zulkiflle Leman, Shazarel Shamsudin, Suraya Mohd Tahir, Che Nor Aiza Jaafar, Azmah Hanim Mohamed Ariff, Nur Ismarrubie Zahari & Mohammed H. Rady. (2021) The Effects of CuO and SiO2 on Aluminum AA6061 Hybrid Nanocomposite as Reinforcements: A Concise Review. Coatings 11:8, pages 972.
Crossref
Rashid Ali Laghari & Jianguang Li. (2021) Modeling and optimization of cutting forces and effect of turning parameters on SiCp/Al 45% vs SiCp/Al 50% metal matrix composites: a comparative study. SN Applied Sciences 3:7.
Crossref
Kenneth Kanayo Alaneme, Saheed Adeoye Babalola, Lesley Heath Chown, Nthabiseng Beauty Maledi & Michael Oluwatosin Bodunrin. (2021) Study on hot deformation behavior and workability of stir-cast Al6063-6wt.% steel p based composites . Journal of the Mechanical Behavior of Materials 30:1, pages 110-117.
Crossref
Kenneth Kanayo Alaneme, Saheed Adeoye Babalola, Michael Oluwatosin Bodunrin, Lesley Heath Chown, Eloho Anita Okotete & Nthabiseng Beauty Maledi. (2021) Hot deformation of nickel particles reinforced aluminium based composites: flow behaviour, microstructural evolution and processing map analyses. Materials Research Express 8:1, pages 016510.
Crossref
Saheed Adeoye Babalola, Kenneth Kanayo Alaneme, Samuel Ranti Oke, Lesley Heath Chown, Nthabiseng Beauty Maledi & Michael Oluwatosin Bodunrin. (2021) Hot compression behaviour and microstructural evolution in aluminium based composites: an assessment of the role of reinforcements and deformation parameters. Manufacturing Review 8, pages 6.
Crossref
N. Mahaviradhan & S. Sivaganesan. (2021) Tribological analysis of hybrid aluminum matrix composites for high temperature applications. Materials Today: Proceedings 39, pages 669-675.
Crossref
Srinivas Reddy Mungara, H.S. Manohar & M.A. Trishul. (2021) Study of mechanical characteristics of stir cast AA7050-B4C metal matrix ceramic composites. Materials Today: Proceedings 37, pages 1463-1468.
Crossref
Kenneth Kanayo Alaneme, Saheed Adeoye Babalola & Michael Oluwatosin Bodunrin. (2021) On the prediction of hot deformation mechanisms and workability in Al6063/Ni and Al6063/steel composites using hyperbolic-sine constitutive equation. Materials Today: Proceedings 38, pages 942-948.
Crossref
Kenneth K. Alaneme, Michael O. Bodunrin, Lesley H. Chown & Nthabiseng B. Maledi. (2020) Comportamiento del flujo de esfuerzo y análisis microestructural de compuestos de matriz de aluminio deformados en caliente y reforzados con partículas de la aleación con memoria de forma CuZnAlNi. Revista de Metalurgia 56:2, pages 170.
Crossref
Nguyen Hoang Viet & Nguyen Thi Hoang Oanh. (2020) Microstructure and Electrical Property of Ex-Situ and In-Situ Copper Titanium Carbide Nanocomposites. Metals 10:6, pages 735.
Crossref
N Anand & Senthil Kumaran S. (2020) Development and influence of tribomechanical properties on magnesium based hybrid metal matrix composites-a review. Materials Research Express 7:3, pages 036520.
Crossref
Ghodratollah Roudini & Milad Haji Hassan Arez. (2020) Study of mechanical properties of high volume fraction aluminum/steel shots metal matrix composites. Materials Research Express 6:12, pages 1265h6.
Crossref
Kenneth Kanayo Alaneme, Saheed Adeoye Babalola, Lesley Heath Chown & Michael Oluwatosin Bodunrin. (2020) Hot deformation behaviour of bamboo leaf ash–silicon carbide hybrid reinforced aluminium based composite. Manufacturing Review 7, pages 17.
Crossref
Azeez Lawan Rominiyi, Mxolisi Brendon Shongwe, Enoch Nifise Ogunmuyiwa, Bukola Joseph Babalola, Paballo Fortinate Lepele & Peter Apata Olubambi. (2020) Effect of nickel addition on densification, microstructure and wear behaviour of spark plasma sintered CP-titanium. Materials Chemistry and Physics 240, pages 122130.
Crossref

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.