Citations (71)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (33)
Giulia Finotello, Johan T. Padding, Kay A. Buist, Annelien Schijve, Alfred Jongsma, Fredrik Innings & J. A. M. Kuipers. (2020) Numerical investigation of droplet-droplet collisions in a water and milk spray with coupled heat and mass transfer. Drying Technology 38:12, pages 1597-1619.
Read now
Read now
T. T. H. Tran, M. Jaskulski & E. Tsotsas. (2017) Reduction of a model for single droplet drying and application to CFD of skim milk spray drying. Drying Technology 35:13, pages 1571-1583.
Read now
Read now
Jayshri Kailas Madagul, Durgesh Rameshlal Parakh, Rachana S. Kumar & Rakesh Ramesh Abhang. (2017) Formulation and evaluation of solid self-microemulsifying drug delivery system of chlorthalidone by spray drying technology. Drying Technology 35:12, pages 1433-1449.
Read now
Read now
Muzammil Ali, Tariq Mahmud, Peter John Heggs, Mojtaba Ghadiri, Andrew Bayly, Hossein Ahmadian & Luis Martin de Juan. (2017) CFD modeling of a pilot-scale countercurrent spray drying tower for the manufacture of detergent powder. Drying Technology 35:3, pages 281-299.
Read now
Read now
Durgesh Rameshlal Parakh, Moreshwar Pandharinath Patil, Neelam Laxman Dashputre & Sanjay Jayprakash Kshirsagar. (2016) Development of self-microemulsifying drug delivery system of mebendazole by spray drying technology: Characterization, in vitro and in vivo evaluation. Drying Technology 34:9, pages 1023-1042.
Read now
Read now
Samaneh Keshani, Mohammad Hossein Montazeri, Wan Ramli Wan Daud & M. Mohsen Nourouzi. (2015) CFD Modeling of Air Flow on Wall Deposition in Different Spray Dryer Geometries. Drying Technology 33:7, pages 784-795.
Read now
Read now
Pawel Wawrzyniak, Marek Podyma, Ireneusz Zbicinski, Zdzislaw Bartczak, Andrzej Polanczyk & Julia Rabaeva. (2012) Model of Heat and Mass Transfer in an Industrial Counter-Current Spray-Drying Tower. Drying Technology 30:11-12, pages 1274-1282.
Read now
Read now
Maksim Mezhericher, Avi Levy & Irene Borde. (2012) Three-Dimensional Spray-Drying Model Based on Comprehensive Formulation of Drying Kinetics. Drying Technology 30:11-12, pages 1256-1273.
Read now
Read now
JigneshP. Raval, DeepR. Naik & PradipS. Patel. (2012) Spray-dried Cefixime Encapsulated Poly(lactide-co-glycolide) Microparticles: Characterization and Evaluation of In Vitro Release Kinetics with Antibacterial Activity. Drying Technology 30:8, pages 865-872.
Read now
Read now
Pawel Wawrzyniak, Marek Podyma, Ireneusz Zbicinski, Zdzislaw Bartczak & Julia Rabaeva. (2012) Modeling of Air Flow in an Industrial Countercurrent Spray-Drying Tower. Drying Technology 30:2, pages 217-224.
Read now
Read now
Iris Schmitz, Alessandro Gianfrancesco, Ulrich Kulozik & Petra Foerst. (2011) Kinetics of Lysine Loss in an Infant Formula Model System at Conditions Applicable to Spray Drying. Drying Technology 29:16, pages 1876-1883.
Read now
Read now
Chih-Yuan Hsu & Rome-Ming Wu. (2010) Effect of Overflow Depth of a Hydrocyclone on Particle Separation. Drying Technology 28:7, pages 916-921.
Read now
Read now
C. Anandharamakrishnan, J. Gimbun, A. G. F. Stapley & C. D. Rielly. (2010) A Study of Particle Histories during Spray Drying Using Computational Fluid Dynamic Simulations. Drying Technology 28:5, pages 566-576.
Read now
Read now
TarekJ. Jamaleddine & MadhumitaB. Ray. (2010) Application of Computational Fluid Dynamics for Simulation of Drying Processes: A Review. Drying Technology 28:2, pages 120-154.
Read now
Read now
JaimeE. Gómez, DiógenesL. Melo, RodrigoM. Bórquez & EdgardoR. Canales. (2009) Computational Study of Impingement Jet Drying of Seeds Using Superheated Steam Based on Kinetic Theory of Granular Flow. Drying Technology 27:11, pages 1171-1182.
Read now
Read now
M. Mezhericher, A. Levy & I. Borde. (2009) Modeling of Droplet Drying in Spray Chambers Using 2D and 3D Computational Fluid Dynamics. Drying Technology 27:3, pages 359-370.
Read now
Read now
Peng Xu, Z. Wu, A. S. Mujumdar & B. Yu. (2009) Innovative Hydrocyclone Inlet Designs to Reduce Erosion-Induced Wear in Mineral Dewatering Processes. Drying Technology 27:2, pages 201-211.
Read now
Read now
M. Mezhericher, A. Levy & I. Borde. (2008) Droplet–Droplet Interactions in Spray Drying by Using 2D Computational Fluid Dynamics. Drying Technology 26:3, pages 265-282.
Read now
Read now
Ahmet Kaya, Orhan Aydın & Ibrahim Dincer. (2007) Heat and Mass Transfer Modeling of Recirculating Flows During Air Drying of Moist Objects for Various Dryer Configurations. Numerical Heat Transfer, Part A: Applications 53:1, pages 18-34.
Read now
Read now
T. A. G. Langrish. (2007) New Engineered Particles from Spray Dryers: Research Needs in Spray Drying. Drying Technology 25:6, pages 971-983.
Read now
Read now
Lixin Huang & ArunS. Mujumdar. (2007) Simulation of an Industrial Spray Dryer and Prediction of Off-Design Performance. Drying Technology 25:4, pages 703-714.
Read now
Read now
Cheng-Sheng Liu, Kashappa GoudH. Desai, Xiang-Hong Meng & Xi-Guang Chen. (2007) Sweet Potato Starch Microparticles as Controlled Drug Release Carriers: Preparation and In Vitro Drug Release. Drying Technology 25:4, pages 689-693.
Read now
Read now
Nesip Dalmaz, Hilmi
Onder Ozbelge, Ahmet
Nedim Eraslan & Yusuf Uludag. (2007) Heat and Mass Transfer Mechanisms in Drying of a Suspension Droplet: A New Computational Model. Drying Technology 25:2, pages 391-400.
Read now
Read now
Lixin Huang & A. S. Mujumdar. (2006) Numerical Study of Two-Stage Horizontal Spray Dryers Using Computational Fluid Dynamics. Drying Technology 24:6, pages 727-733.
Read now
Read now
Chengsheng Liu, Kashappa GoudH. Desai, Xuexi Tang & Xiguang Chen. (2006) Drug Release Kinetics of Spray-Dried Chitosan Microspheres. Drying Technology 24:6, pages 769-776.
Read now
Read now
Zhonghua Wu & A. S. Mujumdar. (2006) A Parametric Study of Spray Drying of a Solution in a Pulsating High-Temperature Turbulent Flow. Drying Technology 24:6, pages 751-761.
Read now
Read now
KamleshC. Patel, Xiao Dong Chen & Saptarshi Kar. (2005) The Temperature Uniformity During Air Drying of a Colloidal Liquid Droplet. Drying Technology 23:12, pages 2337-2367.
Read now
Read now
Li Xin Huang, M. L. Passos, Kurichi Kumar & A. S. Mujumdar. (2005) A Three-Dimensional Simulation of a Spray Dryer Fitted with a Rotary Atomizer. Drying Technology 23:9-11, pages 1859-1873.
Read now
Read now
Sean Xu Qi Lin & Xiao Dong Chen. (2005) Prediction of Air-Drying of Milk Droplet Under Relatively High Humidity Using the Reaction Engineering Approach. Drying Technology 23:7, pages 1395-1406.
Read now
Read now
Kashappa GoudH. Desai & Hyun Jin Park. (2005) Recent Developments in Microencapsulation of Food Ingredients. Drying Technology 23:7, pages 1361-1394.
Read now
Read now
Lixin Huang & ArunS. Mujumdar. (2005) Development of a New Innovative Conceptual Design for Horizontal Spray Dryer via Mathematical Modeling. Drying Technology 23:6, pages 1169-1187.
Read now
Read now
Lixin Huang, Kurichi Kumar & A. S. Mujumdar. (2004) Simulation of a Spray Dryer Fitted with a Rotary Disk Atomizer Using a Three-Dimensional Computional Fluid Dynamic Model. Drying Technology 22:6, pages 1489-1515.
Read now
Read now
Articles from other publishers (38)
Nora Alina Ruprecht, Heike Teichmann & Reinhard Kohlus. (2023) A particle shape-based segmentation method to characterize spray dried materials by X-Ray microtomography. Particuology 81, pages 119-127.
Crossref
Crossref
Zhe Li, Wang-Hai Peng, Wen-Jun Liu, Ling-Yu Yang, Abid Naeem, Yi Feng, Liang-Shan Ming & Wei-Feng Zhu. (2023) Advances in numerical simulation of unit operations for tablet preparation. International Journal of Pharmaceutics 634, pages 122638.
Crossref
Crossref
Fei Zhang, Funian Han, Youyu Lu, Guanghua Wen, Shaopeng Gu, Zhe Wang & Ping Tang. (2023) Experimental study and numerical simulation of the influence of ball milling parameters on granule sizes of mold powder. Powder Technology 413, pages 118037.
Crossref
Crossref
Fang Xu, Xin Liu, Lin Zhang, Ao Wang, Weigang Xu, Jiamei Fang, Ying Xi, Zelin Wang & Yuheng Jing. (2022) Research on atomization evaporation characteristics and parameter optimization of a novel spray evaporation desalting system. Desalination 542, pages 116057.
Crossref
Crossref
Somayeh Jafari, Hassan Khaleghi & Reza Maddahian. (2022) A new approach to account for porosity variations on the solidification of a skim milk droplet. Chemical Engineering Science 248, pages 117080.
Crossref
Crossref
Borja Hernandez, Mariano Martín & Prashant Gupta. (2021) Numerical study of airflow regimes and instabilities produced by the swirl generation chamber in counter-current spray dryers. Chemical Engineering Research and Design 176, pages 89-101.
Crossref
Crossref
Umair Jamil Ur Rahman & Artur K. Pozarlik. (2021) Numerical Study and Experimental Validation of Skim Milk Drying in a Process Intensified Counter Flow Spray Dryer. Energies 14:16, pages 4974.
Crossref
Crossref
K. Rajasekar & B. Raja. (2021) Investigation on Heat and Mass Transfer in Spray Drying Process. Journal of Engineering Thermophysics 30:3, pages 433-448.
Crossref
Crossref
Umair Jamil Ur Rahman, Artur Krzysztof Pozarlik, Thomas Tourneur, Axel de Broqueville, Juray De Wilde & Gerrit Brem. (2021) Numerical Study toward Optimization of Spray Drying in a Novel Radial Multizone Dryer. Energies 14:5, pages 1233.
Crossref
Crossref
Shuo Zhang, Nan Liu, Yanqiu Pan, Wei Wang, Yizhe Li & Yanni Zhu. (2021) Three-dimensional modelling of two-phase flow and transport in a pilot centrifugal spray dryer. Chemical Physics Letters 765, pages 138309.
Crossref
Crossref
Timothy A. G. Langrish, James Harrington, Xing Huang & Chao Zhong. (2020) Using CFD Simulations to Guide the Development of a New Spray Dryer Design. Processes 8:8, pages 932.
Crossref
Crossref
Tantular Nurtono, Widiyastuti Widiyastuti, Annie Mufyda Rahmatika, Siti Machmudah & Sugeng Winardi. (2020) Simulation of the Drying Process of Polysaccharide Extract Solution in a Spray Dryer. IOP Conference Series: Materials Science and Engineering 778:1, pages 012168.
Crossref
Crossref
D. Beckers, N. Ellendt, U. Fritsching & V. Uhlenwinkel. (2020) Impact of process flow conditions on particle morphology in metal powder production via gas atomization. Advanced Powder Technology 31:1, pages 300-311.
Crossref
Crossref
Fernanda de Melo Ramos, Job Ubbink, Vivaldo Silveira Júnior & Ana Silvia Prata. (2019) Drying of Maltodextrin solution in a vacuum spray dryer. Chemical Engineering Research and Design 146, pages 78-86.
Crossref
Crossref
Wei Du, Ze Sun, Guimin Lu & Jianguo Yu. (2017) Interaction between a hollow‐cone spray and the co‐axial swirling stratified flow in a novel spray pyrolysis furnace. The Canadian Journal of Chemical Engineering 96:5, pages 1079-1088.
Crossref
Crossref
Rani Puthukulangara Ramachandran, Mohsen Akbarzadeh, Jitendra Paliwal & Stefan Cenkowski. (2017) Computational Fluid Dynamics in Drying Process Modelling—a Technical Review. Food and Bioprocess Technology 11:2, pages 271-292.
Crossref
Crossref
Wei Du, Ze Sun, Guimin Lu & Jianguo Yu. (2017) CFD aided design of integrated spray pyrolysis furnace for liquid ore exploitation. Chemical Engineering and Processing: Process Intensification 122, pages 245-257.
Crossref
Crossref
Wei Du, Ze Sun, Guimin Lu & Jianguo Yu. (2016) The Two-Phase High-Speed Stream at the Centerline of a Hollow-Cone Spray Produced by a Pressure-Swirl Nozzle. Industrial & Engineering Chemistry Research 56:1, pages 359-367.
Crossref
Crossref
Paweł Wawrzyniak, Maciej Jaskulski, Ireneusz Zbiciński & Marek Podyma. (2017) CFD modelling of moisture evaporation in an industrial dispersed system. Advanced Powder Technology 28:1, pages 167-176.
Crossref
Crossref
Iris Schmitz-Schug, Ulrich Kulozik & Petra Foerst. (2016) Modeling spray drying of dairy products – Impact of drying kinetics, reaction kinetics and spray drying conditions on lysine loss. Chemical Engineering Science 141, pages 315-329.
Crossref
Crossref
Samaneh Keshani, Wan Ramli Wan Daud, M.M. Nourouzi, Farideh Namvar & Mostafa Ghasemi. (2015) Spray drying: An overview on wall deposition, process and modeling. Journal of Food Engineering 146, pages 152-162.
Crossref
Crossref
Mei Li Liu, Yu Mao, Juan Wang & Jiang Yun Wang. (2012) Dynamic Simulation of Flow Behavior in a New Spray Granulation Tower. Applied Mechanics and Materials 157-158, pages 1246-1252.
Crossref
Crossref
Hai Wei Ren & Yi Zhang. (2011) Applications of Computational Fluid Dynamics(CFD) in the Food Industry. Advanced Materials Research 236-238, pages 2273-2278.
Crossref
Crossref
A. Salem, M. Ahmadlouiedarab & K. Ghasemzadeh. (2011) CFD approach for the moisture prediction in spray chamber for drying of salt solution. Journal of Industrial and Engineering Chemistry 17:3, pages 527-532.
Crossref
Crossref
M. Mezhericher, A. Levy & I. Borde. (2010) Spray drying modelling based on advanced droplet drying kinetics. Chemical Engineering and Processing: Process Intensification 49:11, pages 1205-1213.
Crossref
Crossref
Rinil Kuriakose & C. Anandharamakrishnan. (2010) Computational fluid dynamics (CFD) applications in spray drying of food products. Trends in Food Science & Technology 21:8, pages 383-398.
Crossref
Crossref
Zhang Zhijun, Zhang Shiwei & Xu Chenghai. (2010) Notice of Retraction: The pressure effect on gas-liquid two-phase flow in spray drying process. Notice of Retraction: The pressure effect on gas-liquid two-phase flow in spray drying process.
J.R. Gabites, J. Abrahamson & J.A. Winchester. (2010) Air flow patterns in an industrial milk powder spray dryer. Chemical Engineering Research and Design 88:7, pages 899-910.
Crossref
Crossref
Timothy Langrish. 2010. Mathematical Modeling of Food Processing. Mathematical Modeling of Food Processing
301
329
.
D.F. Fletcher & T.A.G. Langrish. (2009) Scale-adaptive simulation (SAS) modelling of a pilot-scale spray dryer. Chemical Engineering Research and Design 87:10, pages 1371-1378.
Crossref
Crossref
T.A.G. Langrish. (2009) Multi-scale mathematical modelling of spray dryers. Journal of Food Engineering 93:2, pages 218-228.
Crossref
Crossref
Xiao Dong Chen & Kamlesh C. Patel. (2007) Micro-organism inactivation during drying of small droplets or thin-layer slabs – A critical review of existing kinetics models and an appraisal of the drying rate dependent model. Journal of Food Engineering 82:1, pages 1-10.
Crossref
Crossref
Li Xin Huang & A. S. Mujumdar. (2007) A computational fluid dynamic study of a low-humidity co-current spray dryer. Asia-Pacific Journal of Chemical Engineering 2:1, pages 12-19.
Crossref
Crossref
Tomás Norton & Da-Wen Sun. (2006) Computational fluid dynamics (CFD) – an effective and efficient design and analysis tool for the food industry: A review. Trends in Food Science & Technology 17:11, pages 600-620.
Crossref
Crossref
D.F. Fletcher, B. Guo, D.J.E. Harvie, T.A.G. Langrish, J.J. Nijdam & J. Williams. (2006) What is important in the simulation of spray dryer performance and how do current CFD models perform?. Applied Mathematical Modelling 30:11, pages 1281-1292.
Crossref
Crossref
Li Xin Huang, Kurichi Kumar & A.S. Mujumdar. (2006) A comparative study of a spray dryer with rotary disc atomizer and pressure nozzle using computational fluid dynamic simulations. Chemical Engineering and Processing: Process Intensification 45:6, pages 461-470.
Crossref
Crossref
KAMLESH C. PATEL & XIAO DONG CHEN. (2005) PREDICTION OF SPRAY-DRIED PRODUCT QUALITY USING TWO SIMPLE DRYING KINETICS MODELS. Journal of Food Process Engineering 28:6, pages 567-594.
Crossref
Crossref
Xiao Dong Chen & Sean Xu Qi Lin. (2005) Air drying of milk droplet under constant and time-dependent conditions. AIChE Journal 51:6, pages 1790-1799.
Crossref
Crossref