Advanced search
Publication Cover
Machining Science and Technology
An International Journal
Volume 6, 2002 - Issue 1
Submit an article Journal homepage
169
Views
16
CrossRef citations to date
0
Altmetric
Original Articles

AN IMPROVED METHOD FOR CUTTER RUNOUT MODELING IN THE PERIPHERAL MILLING PROCESS

Santosh Ranganath Delphi Automotive Systems, U.S.A.
&
John W. Sutherland Michigan Technological University, Michigan, U.S.A.
Pages 1-20 | Published online: 07 Feb 2007

Citations (16)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (2)

Irene Buj-Corral, Joan Vivancos-Calvet & Hernán González-Rojas. (2016) Influence of eccentricity on roughness distributions in side milling. Machining Science and Technology 20:2, pages 187-200.
Read now
Irene Buj-Corral, Joan Vivancos-Calvet & Hernán González-Rojas. (2013) ROUGHNESS VARIATION CAUSED BY GRINDING ERRORS OF CUTTING EDGES IN SIDE MILLING. Machining Science and Technology 17:4, pages 575-592.
Read now

Articles from other publishers (14)

Gensheng Li, Chao Xian & Hongmin Xin. (2021) Identification of eccentricity for disc milling cutter of indexable two sided inserts. Advances in Mechanical Engineering 13:8, pages 168781402110414.
Crossref
Tony L. Schmitz & K. Scott SmithTony L. Schmitz & K. Scott Smith. 2019. Machining Dynamics. Machining Dynamics 241 281 .
Yanlong Cao, Weixin Hu, Jiangxin Yang, Huichao Shang, Wenbo Wang & Guoqing Zhang. (2017) Influence of tool rotation errors on flank machined surface. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:13, pages 2420-2429.
Crossref
Qiang Guo, Bo Zhao, Yan Jiang & Wu Zhao. (2018) Cutting force modeling for non-uniform helix tools based on compensated chip thickness in five-axis flank milling process. Precision Engineering 51, pages 659-681.
Crossref
Yan Zhang & Xiao Jin Wan. (2013) Systematic Evaluation of Influence of Process Parameters on Surface Texture in Flank Milling. Advanced Materials Research 823, pages 165-169.
Crossref
M. Krüger & B. Denkena. (2012) Model-based identification of tool runout in end milling and estimation of surface roughness from measured cutting forces. The International Journal of Advanced Manufacturing Technology 65:5-8, pages 1067-1080.
Crossref
Irene Buj-Corral, Joan Vivancos-Calvet & Hernán González-Rojas. (2011) Influence of feed, eccentricity and helix angle on topography obtained in side milling processes. International Journal of Machine Tools and Manufacture 51:12, pages 889-897.
Crossref
Yunwen Sun & Qiang Guo. (2011) Numerical simulation and prediction of cutting forces in five-axis milling processes with cutter run-out. International Journal of Machine Tools and Manufacture 51:10-11, pages 806-815.
Crossref
Suleiman M. Obeidat & Shivakumar Raman. (2010) Process-guided coordinate sampling of end-milled flat plates. The International Journal of Advanced Manufacturing Technology 53:9-12, pages 979-991.
Crossref
Miguel Arizmendi, Justino Fernández, Alain Gil & Fernando Veiga. (2010) Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling. International Journal of Machine Tools and Manufacture 50:12, pages 1097-1114.
Crossref
Miguel Arizmendi, Justino Fernández, Alain Gil & Fernando Veiga. (2010) Model for the prediction of heterogeneity bands in the topography of surfaces machined by peripheral milling considering tool runout. International Journal of Machine Tools and Manufacture 50:1, pages 51-64.
Crossref
Miguel Arizmendi, Justino Fernández, Alain Gil & Fernando Veiga. (2009) Effect of tool setting error on the topography of surfaces machined by peripheral milling. International Journal of Machine Tools and Manufacture 49:1, pages 36-52.
Crossref
Tony L. Schmitz & Kevin S. SmithTony L. Schmitz & Kevin S. Smith. 2009. Machining Dynamics. Machining Dynamics 199 234 .
Martin B.G. Jun, Keith Bourne, Richard E. DeVor & Shiv G. Kapoor. (2007) Estimation of effective error parameters in high-speed micro-endmilling. International Journal of Machine Tools and Manufacture 47:9, pages 1449-1454.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.