199
Views
27
CrossRef citations to date
0
Altmetric
Articles

Influence of surface morphology on the adhesion strength of epoxy–aluminum interfaces

Pages 1685-1711 | Published online: 02 Apr 2012

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (10)

Ivan Hlača, Leo Škec, Dragan Ribarić & Marin Grbac. (2023) Investigation of the influence of the loading arrangement on the measured mode-I fracture resistance. Journal of Adhesion Science and Technology 0:0, pages 1-28.
Read now
Hsiao-Chien Lee, Yi-Chia Huang, Tzeng-Feng Liu, Wha-Tzong Whang & Chuen-Guang Chao. (2015) Effect of phosphate surface pretreatment on corrosion resistance and adhesion of PI coating on Mg-5 wt.% Sn alloy. Journal of Adhesion Science and Technology 29:12, pages 1229-1245.
Read now
Huiming Ning, Yuan Li, Ning Hu, Yanping Cao, Cheng Yan, Takesi Azuma, Xianghe Peng, Liangke Wu, Jinhua Li & Leilei Li. (2014) Improvement of the mode II interface fracture toughness of glass fiber reinforced plastics/aluminum laminates through vapor grown carbon fiber interleaves. Science and Technology of Advanced Materials 15:3.
Read now
S. Azari, M. Papini & J. K. Spelt. (2010) Effect of Surface Roughness on the Performance of Adhesive Joints Under Static and Cyclic Loading. The Journal of Adhesion 86:7, pages 742-764.
Read now
J. Jumel & M. E. R. Shanahan. (2008) Crack Front Curvature in the Wedge Test. The Journal of Adhesion 84:9, pages 788-804.
Read now
Jiong Liu, ManojK. Chaudhury, DouglasH. Berry, JillE. Seebergh, JosephH. Osborne & KayY. Blohowiak. (2008) Effect of Processing Conditions on Adhesion Performance of a Sol–Gel Reinforced Epoxy/Aluminum Interface. Journal of Adhesion Science and Technology 22:10-11, pages 1159-1180.
Read now
Jiong Liu, ManojK. Chaudhury, DouglasH. Berry, JillE. Seebergh, JosephH. Osborne & KayY. Blohowiak. (2006) Effect of Surface Morphology on Crack Growth at a Sol-Gel Reinforced Epoxy/Aluminum Interface. The Journal of Adhesion 82:5, pages 487-516.
Read now
Jiong Liu, ManojK. Chaudhury, DouglasH. Berry, JillE. Seebergh, JosephH. Osborne & KayY. Blohowiak. (2006) Fracture behavior of an epoxy/aluminum interface reinforced by sol–gel coatings. Journal of Adhesion Science and Technology 20:4, pages 277-305.
Read now
DouglasH. Berry & Apinan Namkanisorn. (2005) Fracture Toughness of a Silane Coupled Polymer-Metal Interface: Silane Concentration Effects. The Journal of Adhesion 81:3-4, pages 347-370.
Read now
Sylvain Popineau, Benoît Gautier, Pierre Slangen & MartinE. R. Shanahan. (2004) A 3D EFFECT IN THE WEDGE ADHESION TEST: APPLICATION OF SPECKLE INTERFEROMETRY. The Journal of Adhesion 80:12, pages 1173-1194.
Read now

Articles from other publishers (17)

Weikang Feng, Marcio Moreira Arouche & Marko Pavlovic. (2024) Influence of surface roughness on the mode II fracture toughness and fatigue resistance of bonded composite-to-steel joints. Construction and Building Materials 411, pages 134358.
Crossref
Timothy M. Shenk, Kenneth M. Benjamin & Robb M. Winter. (2023) Atomic force microscopy and scanning electron microscopy characterization of the controlling of surface morphology of epoxy‐amine‐cured spin‐coated films. Journal of Applied Polymer Science.
Crossref
X. Sourd, R. Zitoune, L. Crouzeix & M. Coulaud. (2022) Influence of the texturing quality consecutive to Abrasive Water Jet machining on the adhesive properties in mode I of 3D woven composite assemblies. Composites Part B: Engineering 242, pages 110091.
Crossref
A.R. Shugurov & E.D. Kuzminov. (2022) Mechanical and tribological properties of Ti-Al-Ta-N/TiAl and Ti-Al-Ta-N/Ta multilayer coatings deposited by DC magnetron sputtering. Surface and Coatings Technology 441, pages 128582.
Crossref
S. Sooriyan, U. Madhusudhanan & R. Kitey. 2022. Advances in Structural Integrity. Advances in Structural Integrity 383 393 .
R. Nobile, F.W. Panella, A. Pirinu & A. Saponaro. (2021) Bending residual strength of damaged Al foam sandwiches through UT and IRT analyses. Procedia Structural Integrity 33, pages 685-694.
Crossref
S.G. Croll. (2020) Surface roughness profile and its effect on coating adhesion and corrosion protection: A review. Progress in Organic Coatings 148, pages 105847.
Crossref
E. D. ReedyJr.Jr. & M. E. Stavig. (2020) Interfacial toughness: dependence on surface roughness and test temperature. International Journal of Fracture 222:1-2, pages 1-12.
Crossref
Lei Pan, Jingling Hu, Yunfei Lv, Wenliang Ma, Wenye Ding, Yifan Wang, Aiai Zhang, Fei Wang, Xiaofei Pang & Jie Tao. (2018) Modification of Ti-6Al-4V plates with Schiff base complex and adhesive performance of Ti-6Al-4V/PEEK. Materials & Design 144, pages 271-280.
Crossref
Sarthak S. Singh & R. Kitey. (2017) Effect of interface profile and incident wave characteristics on aluminum/epoxy dynamic adhesion strength. International Journal of Adhesion and Adhesives 79, pages 8-17.
Crossref
Pamela Lin, Rita I. Babicheva, Ming Xue, Hai Shu Zhang, Huan Xu, Bo Liu & Kun Zhou. (2015) Effects of temperature and voids on the interfacial fracture of Si/a-Si 3 N 4 bilayer systems . physica status solidi (b) 252:9, pages 2013-2019.
Crossref
S. A. Meguid, Chen Zhuo & Fan Yang. (2014) Effective Mitigation of Shock Loads in Embedded Electronic Packaging Using Bilayered Potting Materials. Journal of Electronic Packaging 136:4.
Crossref
Takuya Suzuki, Ryosuke Matsuzaki, Akira Todoroki & Yoshihiro Mizutani. (2013) Crack growth analysis of a composite/adhesive interface toughened by in-mold surface preparation. International Journal of Adhesion and Adhesives 42, pages 36-43.
Crossref
Elise Legghe, Emmanuel Aragon, Lénaïk Bélec, André Margaillan & Denis Melot. (2009) Correlation between water diffusion and adhesion loss: Study of an epoxy primer on steel. Progress in Organic Coatings 66:3, pages 276-280.
Crossref
E.D. ReedyJr.Jr.. (2011) Effect of patterned nanoscale interfacial roughness on interfacial toughness: A finite element analysis. Journal of Materials Research 23:11, pages 3056-3065.
Crossref
Chul Jin Syn & Weinong W. Chen. (2008) Surface Morphology Effects on High-Rate Fracture of an Aluminum/Epoxy Interface. Journal of Composite Materials 42:16, pages 1639-1658.
Crossref
Gerd Habenicht. 2006. Kleben. Kleben 863 1024 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.