Citations (147)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (34)
Ashish W. Fande, Ravindra V. Taiwade & Laukik Raut. (2022) Development of activated tungsten inert gas welding and its current status: A review. Materials and Manufacturing Processes 37:8, pages 841-876.
Read now
Read now
Dixit Patel & Suketu Jani. (2021) ATIG welding: a small step towards sustainable manufacturing. Advances in Materials and Processing Technologies 7:3, pages 514-536.
Read now
Read now
Dipali Pandya, Amarish Badgujar & Nilesh Ghetiya. (2021) A novel perception toward welding of stainless steel by activated TIG welding: a review. Materials and Manufacturing Processes 36:8, pages 877-903.
Read now
Read now
Dixit Patel & Suketu Jani. (2021) Techniques to weld similar and dissimilar materials by ATIG welding - an overview. Materials and Manufacturing Processes 36:1, pages 1-16.
Read now
Read now
Surya D. Yadav, P. Vasantharaja, Florian Riedlsperger, S. Nagaraju & M. Vasudevan. (2019) Zone-wise investigation of creep behaviour 9Cr–1Mo steel weld joints. Materials Science and Technology 35:2, pages 155-172.
Read now
Read now
Paulo J. Modenesi. (2015) The chemistry of TIG weld bead formation. Welding International 29:10, pages 771-782.
Read now
Read now
Srirangan Arun Kumar & Paulraj Sathiya. (2015) Experimental Investigation of the A-TIG Welding Process of Incoloy 800H. Materials and Manufacturing Processes 30:9, pages 1154-1159.
Read now
Read now
P. Vasantharaja, V. Maduarimuthu, M. Vasudevan & P. Palanichamy. (2012) Assessment of Residual Stresses and Distortion in Stainless Steel Weld Joints. Materials and Manufacturing Processes 27:12, pages 1376-1381.
Read now
Read now
A Berthier, P Paillard, M Carin, F Valensi & S Pellerin. (2012) TIG and A-TIG welding experimental investigations and comparison to simulation. Science and Technology of Welding and Joining 17:8, pages 609-615.
Read now
Read now
V. Arunkumar, M. Vasudevan, V. Maduraimuthu & V. Muthupandi. (2012) Effect of Activated Flux on the Microstructure and Mechanical Properties of 9Cr-1Mo Steel Weld Joint. Materials and Manufacturing Processes 27:11, pages 1171-1177.
Read now
Read now
Z D Zhang & Q J Cao. (2012) Study on metal transfer behaviour in metal inert gas arc welding with activating flux for magnesium alloy. Science and Technology of Welding and Joining 17:7, pages 550-555.
Read now
Read now
P-W Hsu, R-S Chen, F-H Kao, S-H Wang, J-R Yang, S-Y Tsai & J-G Duh. (2011) Martensite nucleation site and grain refinement in duplex titanium alloy weldment by active flux with nanoparticle addition. Science and Technology of Welding and Joining 16:6, pages 514-521.
Read now
Read now
S Okano, M Tanaka & M Mochizuki. (2011) Arc physics based heat source modelling for numerical simulation of weld residual stress and distortion. Science and Technology of Welding and Joining 16:3, pages 209-214.
Read now
Read now
D. J. Li, S. P. Lu, D. Z. Li & Y. Y. Li. (2010) Mechanisms increasing welding efficiency during new development of double shielded TIG process. Science and Technology of Welding and Joining 15:6, pages 528-533.
Read now
Read now
A. Berthier, P. Paillard & F. Christien. (2009) Structural and chemical evolution of super duplex stainless steel on activated tungsten inert gas welding process. Science and Technology of Welding and Joining 14:8, pages 681-690.
Read now
Read now
S. P. Lu, H. Fujii & K. Nogi. (2009) Weld shape variation and electrode protection under Ar–(Ar–O2) double shielded GTA welding. Science and Technology of Welding and Joining 14:8, pages 726-733.
Read now
Read now
S. P. Lu, W. C. Dong, D. Z. Li & Y. Y. Li. (2009) Numerical simulation for welding pool and welding arc with variable active element and welding parameters. Science and Technology of Welding and Joining 14:6, pages 509-516.
Read now
Read now
A. R. Loureiro, B. F. O. Costa, A. C. Batista & A. Rodrigues. (2009) Effect of activating flux and shielding gas on microstructure of TIG welds in austenitic stainless steel. Science and Technology of Welding and Joining 14:4, pages 315-320.
Read now
Read now
C. X. Zhao, V. van Steijn, I. M. Richardson, C. R. Kleijn, S. Kenjeres & Z. Saldi. (2009) Unsteady interfacial phenomena during inward weld pool flow with an active surface oxide. Science and Technology of Welding and Joining 14:2, pages 132-140.
Read now
Read now
S.P. Lu, H. Fujii, K. Nogi & T. Sato. (2007) Effect of oxygen content in He–O2 shielding gas on weld shape in ultra deep penetration TIG. Science and Technology of Welding and Joining 12:8, pages 689-695.
Read now
Read now
M. Vasudevan, A. K. Bhaduri, Baldev Raj & K.
Prasad Rao. (2007) Genetic-Algorithm-Based Computational Models for Optimizing the Process Parameters of A-TIG Welding to Achieve Target Bead Geometry in Type 304 L(N) and 316 L(N) Stainless Steels. Materials and Manufacturing Processes 22:5, pages 641-649.
Read now
Read now
S. Leconte, P. Paillard, P. Chapelle, G. Henrion & J. Saindrenan. (2007) Effects of flux containing fluorides on TIG welding process. Science and Technology of Welding and Joining 12:2, pages 120-126.
Read now
Read now
S. Leconte, P. Paillard, P. Chapelle, G. Henrion & J. Saindrenan. (2006) Effect of oxide fluxes on activation mechanisms of tungsten inert gas process. Science and Technology of Welding and Joining 11:4, pages 389-397.
Read now
Read now
L.-M. Liu, Y. Shen & Z.-D. Zhang. (2006) Effect of cadmium chloride flux in GTA welding of magnesium alloys. Science and Technology of Welding and Joining 11:4, pages 398-402.
Read now
Read now
M Tanaka, H Terasaki, H Fujii, M Ushio, R Narita & K Kobayashi. (2006) Anode heat transfer in TIG welding and its effect on the cross-sectional area of weld penetration. Welding International 20:4, pages 268-274.
Read now
Read now
S. Leconte, P. Paillard & J. Saindrenan. (2006) Effect of fluxes containing oxides on tungsten inert gas welding process. Science and Technology of Welding and Joining 11:1, pages 43-47.
Read now
Read now
H Fujii. (2005) Mechanism of A-TIG and AA-TIG (advanced A-TIG). Welding International 19:12, pages 934-939.
Read now
Read now
Z.-D. Zhang, L.-M. Liu, Y. Shen & L. Wang. (2005) Welding of magnesium alloys with activating flux. Science and Technology of Welding and Joining 10:6, pages 737-743.
Read now
Read now
A. Rodrigues & A. Loureiro. (2005) Effect of shielding gas and activating flux on weld bead geometry in tungsten inert gas welding of austenitic stainless steels. Science and Technology of Welding and Joining 10:6, pages 760-765.
Read now
Read now
M Tanaka. (2005) Effects of surface active elements on weld pool formation using TIG arcs. Welding International 19:11, pages 870-876.
Read now
Read now
H. Y. Huang, S. W. Shyu, K. H. Tseng & C. P. Chou. (2005) Evaluation of TIG flux welding on the characteristics of stainless steel. Science and Technology of Welding and Joining 10:5, pages 566-573.
Read now
Read now
M Tanaka. (2004) An introduction to physical phenomena in arc welding processes. Welding International 18:11, pages 845-851.
Read now
Read now
Z. Sun & D. Pan. (2004) Welding of titanium alloys with activating flux. Science and Technology of Welding and Joining 9:4, pages 337-344.
Read now
Read now
S.-P. Lu, H. Fujii & K. Nogi. (2004) Weld shape comparison with iron oxide flux and Ar–O2 shielding gas in gas tungsten arc welding. Science and Technology of Welding and Joining 9:3, pages 272-276.
Read now
Read now
Articles from other publishers (113)
Xinxin Wang, Shinichi Tashiro, Manabu Tanaka & Anthony B. Murphy. (2023) Numerical Investigation of the Iron and Oxygen Transport in Arc Plasma During an Activated Tungsten Inert Gas Welding Process. Plasma Chemistry and Plasma Processing.
Crossref
Crossref
Yong Huang, Boyang Wang, Jianhang Guo, Ding Fan & Shurong Yu. (2023) Investigation of the Mechanism of Powder Pool Coupled Activating TIG Welding. Metals 13:5, pages 830.
Crossref
Crossref
Jia Zhang, Peize Shao, Xinxin Wang & Ding Fan. (2022) Improving weld penetration by two-TIG arc activated via mixing oxygen into shielding gas. The International Journal of Advanced Manufacturing Technology 125:1-2, pages 169-181.
Crossref
Crossref
Anil Kumar Deepati, Sohini Chowdhury, Nabam Teyi, Yadaiah Nirsanametla, Chander Prakash, Kuldeep Kumar Saxena & Sandeep Kumar. (2022) Influence of surface-active elements on GTA welds with respect to metallographic analysis and temperature distribution. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Sudhanshu Ranjan Singh & Pradeep Khanna. (2022) Investigation of A-TIG welded duplex stainless-steel plates. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Aditya Kumaresan, Akash Sundar, Ashwin Annamalai, Gautam Ramesh, Sekar Chandaragiri Baskar, Damodaram Ramachandran & Koteswara Rao Sajja Rama. (2022) Effect of welding current on properties of activated gas tungsten arc super duplex stainless steel welds. Materials Testing 64:8, pages 1242-1253.
Crossref
Crossref
Isaac Dinaharan, Radhakrishnan Ramesh, Harish Chandra Dey & Arun Kumar Bhaduri. (2022) Effect of activating flux on penetration and microstructure of tungsten inert gas-welded pure titanium grade-2 plate. The International Journal of Advanced Manufacturing Technology 121:5-6, pages 3399-3417.
Crossref
Crossref
Chunkai Li, Yue Dai, YuFen Gu & Yu Shi. (2022) Spectroscopic analysis of the arc plasma during activating flux tungsten inert gas welding process. Journal of Manufacturing Processes 75, pages 919-927.
Crossref
Crossref
J. Sivakumar, Karthik Babu N.B, M.P. Mohanraj, E. Hariharan & M. Ranjithkumar. (2022) A New Perception of Activated Flux Tungsten Inert Gas (A-TIG) Welding Techniques for Various Materials. International Journal of Recent Technology and Engineering (IJRTE) 10:5, pages 92-105.
Crossref
Crossref
Sebastian Baloš, Miroslav Dramićanin, Petar Janjatović, Ivan Zabunov, Nenad Kulundžić, Slobodan Tabaković & Vencislav Grabulov. (2022) Influence of oxide content in activated tungsten inert gas welding. Zavarivanje i zavarene konstrukcije 67:4, pages 181-186.
Crossref
Crossref
A.R. Pavan, N. Chandrasekar, B. Arivazhagan, S. Kumar & M. Vasudevan. (2021) Study of arc characteristics using varying shielding gas and optimization of activated-tig welding technique for thick AISI 316L(N) plates. CIRP Journal of Manufacturing Science and Technology 35, pages 675-690.
Crossref
Crossref
J Sivakumar, Nanda Naik Korra & P Vasantharaja. (2020) Computation of residual stresses, distortion, and thermogravimetric analysis of Inconel 625 weld joints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:19, pages 4109-4118.
Crossref
Crossref
Deekshant Varshney & Kaushal Kumar. (2021) Structured review of papers on the use of different activating flux and welding techniques. Ain Shams Engineering Journal 12:3, pages 3339-3351.
Crossref
Crossref
Pratishtha Sharma & Dheerendra Kumar Dwivedi. (2021) Study on Flux assisted-Tungsten inert gas welding of bimetallic P92 martensitic steel-304H austenitic stainless steel using SiO2–TiO2 binary flux. International Journal of Pressure Vessels and Piping 192, pages 104423.
Crossref
Crossref
J. Sivakumar & Nanda Naik Korra. (2021) Optimization of Welding Process Parameters for Activated Tungsten Inert Welding of Inconel 625 Using the Technique for Order Preference by Similarity to Ideal Solution Methodology. Arabian Journal for Science and Engineering 46:8, pages 7399-7409.
Crossref
Crossref
J. Sivakumar, M. Vasudevan & Nanda Naik Korra. (2021) Effect of activated flux tungsten inert gas (A-TIG) welding on the mechanical properties and the metallurgical and corrosion assessment of Inconel 625. Welding in the World 65:6, pages 1061-1077.
Crossref
Crossref
V. Maduraimuthu, P. Vasantharaja, M. Vasudevan & B.S. Panigrahi. (2021) Microstructure and mechanical properties of 9Cr-0.5Mo-1.8W–VNb (P92) steel weld joints processed by fusion welding. Materials Science and Engineering: A 813, pages 141186.
Crossref
Crossref
Deekshant Varshney & Kaushal Kumar. (2021) Application and use of different aluminium alloys with respect to workability, strength and welding parameter optimization. Ain Shams Engineering Journal 12:1, pages 1143-1152.
Crossref
Crossref
Masakazu MORI, Tatsuya TOKUDAYoshiaki MORISADA & Hidetoshi FUJII. (2021) Effect of Friction Stir Processing on Mechanical Properties of AA-TIG welded 9%Ni SteelAA-TIG溶接された9%Ni鋼の機械的性質に及ぼす摩擦攪拌プロセスの影響. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 39:3, pages 200-208.
Crossref
Crossref
Dipali Pandya, Amarish Badgujar & Nilesh Ghetiya. (2021) Effect of hydrogen additions to shielding gas on activated TIG austenitic stainless steel weld. Materials Today: Proceedings 47, pages 1025-1029.
Crossref
Crossref
Anoop K. Unni & Vasudevan Muthukumaran. (2020) Numerical simulation of the influence of oxygen content on the weld pool depth during activated TIG welding. The International Journal of Advanced Manufacturing Technology 112:1-2, pages 467-489.
Crossref
Crossref
Naishadh P. Patel, Daulat Kumar Sharma & Gautam H. Upadhyay. 2021. Current Advances in Mechanical Engineering. Current Advances in Mechanical Engineering
737
746
.
Memduh Kurtulmuş. (2020) Activated flux TIG welding of austenitic stainless steels. Emerging Materials Research 9:4, pages 1041-1055.
Crossref
Crossref
Quentin Marsac, Cécile Gueudré, Marie-Aude Ploix, Laurent Forest, François Baqué & Gilles Corneloup. (2020) Realistic Model to Predict the Macrostructure of GTAW Welds for the Simulation of Ultrasonic Non destructive Testing. Journal of Nondestructive Evaluation 39:4.
Crossref
Crossref
Jiachen Wang, Yinan Cui, Changmeng Liu, Zixiang Li, Qianru Wu & Daining Fang. (2020) Understanding internal defects in Mo fabricated by wire arc additive manufacturing through 3D computed tomography. Journal of Alloys and Compounds 840, pages 155753.
Crossref
Crossref
Sebastian Balos, Miroslav Dramicanin, Petar Janjatovic, Nenad Kulundzic, Ivan Zabunov, Branka Pilic & Damjan Klobčar. (2020) Influence of Metallic Oxide Nanoparticles on the Mechanical Properties of an A-TIG Welded 304L Austenitic Stainless Steel. Materials 13:20, pages 4513.
Crossref
Crossref
Wei Han & Feng-Zhou Fang. (2020) Investigation of electropolishing characteristics of tungsten in eco-friendly sodium hydroxide aqueous solution. Advances in Manufacturing 8:3, pages 265-278.
Crossref
Crossref
Sebastian Balos, Miroslav Dramicanin, Petar Janjatovic, Ivan Zabunov, Branka Pilic, Saurav Goel & Magdalena Szutkowska. (2019) Suppressing the Use of Critical Raw Materials in Joining of AISI 304 Stainless Steel Using Activated Tungsten Inert Gas Welding. Metals 9:11, pages 1187.
Crossref
Crossref
S Mohan Kumar & N. Siva Shanmugam. (2019) Finite element simulation for tensile and impact test of activated TIG welding of AISI 321 austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233:11, pages 2323-2334.
Crossref
Crossref
İsmail TOPCU. (2019) TIG ve MIG Kaynağı ile İşlem Gören 304 ve 1040 Çeliklerin ITAB Bölgesindeki Mekanik Özelliklerin İncelenmesiInvestigation of the Mechanical Properties of 304 and 1040 Steels in the HAZ Region by TIG and MIG Welding. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 34:3, pages 171-182.
Crossref
Crossref
Pratishtha Sharma & Dheerendra Kumar Dwivedi. (2019) A-TIG welding of dissimilar P92 steel and 304H austenitic stainless steel: Mechanisms, microstructure and mechanical properties. Journal of Manufacturing Processes 44, pages 166-178.
Crossref
Crossref
A. R. Pavan, B. Arivazhagan, M. Zubairuddin, S. Mahadevan & M. Vasudevan. (2019) Thermomechanical Analysis of A-TIG and MP-TIG Welding of 2.25Cr-1Mo Steel Considering Phase Transformation. Journal of Materials Engineering and Performance 28:8, pages 4903-4917.
Crossref
Crossref
A P Sadewo, H Ardhyananta & A Purniawan. (2019)
Effect of Acetone/Isopropanol as Solvent TiO
2
Active Flux on Penetration Characteristics Activated Tungsten Inert Gas Welding Incoloy 825
. IOP Conference Series: Materials Science and Engineering 546:4, pages 042039.
Crossref
Crossref
Sebastian Balos, Miroslav Dramicanin, Petar Janjatovic, Ivan Zabunov, Damjan Klobcar, Matija Busic & Maria Luisa Grilli. (2019) Metal Oxide Nanoparticle-Based Coating as a Catalyzer for A-TIG Welding: Critical Raw Material Perspective. Metals 9:5, pages 567.
Crossref
Crossref
A.V. Savinov, O.A. Polesskiy, I.E. Lapin, V.I. Lysak, P.P. Krasikov & A.A. Chudin. (2018) Influence of non-consumable electrode configuration on arc welding characteristics. Journal of Materials Processing Technology 262, pages 319-325.
Crossref
Crossref
S Mohan Kumar & N Siva Shanmugam. (2018) Studies on the weldability, mechanical properties and microstructural characterization of activated flux TIG welding of AISI 321 austenitic stainless steel. Materials Research Express 5:10, pages 106524.
Crossref
Crossref
S.V. Akhonin, V.Yu. Belous, V.A. Berezos & R.V. Selin. (2018) Effect of TIG-Welding on the Structure and Mechanical Properties of the Pseudo-β Titanium Alloy VT19 Welded Joints. Materials Science Forum 927, pages 112-118.
Crossref
Crossref
Manuel Thomas, Raghu V. Prakash, S Ganesh Sundara Raman & M. Vasudevan. (2018) High Temperature Fatigue Crack Growth Rate Studies in Stainless Steel 316L(N) Welds Processed by A-TIG and MP-TIG Welding.. MATEC Web of Conferences 165, pages 21014.
Crossref
Crossref
M. Manikandan, A. Danny Raj, M. Sathish Kumar, N. Arivazhagan, R. Gunachandran, J.K. Mohan Kumar, V. Vignesh & D. Yoganathan. (2018) Investigation on Microstructure, Micro segregation and Mechanical Properties of ATIG welded Alloy C-276. Materials Today: Proceedings 5:2, pages 6702-6710.
Crossref
Crossref
S. Nagaraju, P. Vasantharaja, G. Brahadees, M. Vasudevan & S. Mahadevan. (2017) Effect of Welding Processes on the Microstructure, Mechanical Properties and Residual Stresses of Plain 9Cr-1Mo Steel Weld Joints. Journal of Materials Engineering and Performance 26:12, pages 5938-5953.
Crossref
Crossref
Jayakrishnan S & Chakravarthy P. (2017) Flux bounded tungsten inert gas welding for enhanced weld performance—A review. Journal of Manufacturing Processes 28, pages 116-130.
Crossref
Crossref
Xiaogang Gao, Junhui Dong & Xu Han. (2016) Effect of RE2O3 (RE = La, Ce) fluxes on A-TIG welding of Ti6Al4V. The International Journal of Advanced Manufacturing Technology 91:1-4, pages 1181-1188.
Crossref
Crossref
S. Nagaraju, J. GaneshKumar, P. Vasantharaja, M. Vasudevan & K. Laha. (2017) Evaluation of strength property variations across 9Cr-1Mo steel weld joints using automated ball indentation (ABI) technique. Materials Science and Engineering: A 695, pages 199-210.
Crossref
Crossref
R. S. Vidyarthy, D. K. Dwivedi & M. Vasudevan. (2017) Influence of M-TIG and A-TIG Welding Process on Microstructure and Mechanical Behavior of 409 Ferritic Stainless Steel. Journal of Materials Engineering and Performance 26:3, pages 1391-1403.
Crossref
Crossref
M. Vasudevan. (2017) Effect of A-TIG Welding Process on the Weld Attributes of Type 304LN and 316LN Stainless Steels. Journal of Materials Engineering and Performance 26:3, pages 1325-1336.
Crossref
Crossref
Chunkai Li, Yu Shi, YuFen Gu & Fuqian Yang. (2017) Effect of oxide on surface tension of molten metal. RSC Advances 7:85, pages 53941-53950.
Crossref
Crossref
Rishi Pamnani, M. Vasudevan, T. Jayakumar & P. Vasantharaja. (2016) Development of Activated Flux, Optimization of Welding Parameters and Characterization of Weld Joint for DMR-249A Shipbuilding Steel. Transactions of the Indian Institute of Metals 70:1, pages 49-57.
Crossref
Crossref
Hongbin Dai & Jun Peng. (2016) Effects of active flux on plasma behavior and weld shape in laser welding of X5CrNi189 stainless steel. Modern Physics Letters B 30:31, pages 1650375.
Crossref
Crossref
Fan Jiang, Zhaoyang Yan, Shujun Chen & Zhenyang Lu. (2016) The energy distribution of electrode in hollow cathode centered negative pressure arc. Journal of Manufacturing Processes 24, pages 138-144.
Crossref
Crossref
Jiajing Pan, Shengsun Hu, Lijun Yang & Huan Li. (2016) Simulation and analysis of heat transfer and fluid flow characteristics of variable polarity GTAW process based on a tungsten–arc-specimen coupled model. International Journal of Heat and Mass Transfer 96, pages 346-352.
Crossref
Crossref
R.S. Vidyarthy & D.K. Dwivedi. (2016) Activating flux tungsten inert gas welding for enhanced weld penetration. Journal of Manufacturing Processes 22, pages 211-228.
Crossref
Crossref
P. Vasantharaja, M. Vasudevan & P. Palanichamy. (2015) Effect of welding processes on the residual stress and distortion in type 316LN stainless steel weld joints. Journal of Manufacturing Processes 19, pages 187-193.
Crossref
Crossref
V. Maduraimuthu, M. Vasudevan & P. Parameswaran. (2014) Studies on Improvement of Toughness in Modified 9Cr-1Mo Steel A-TIG Weld Joint. Transactions of the Indian Institute of Metals 68:2, pages 181-189.
Crossref
Crossref
H. L. Wei, H. Li, L. J. Yang, Y. Gao & X. P. Ding. (2014) Arc characteristics and metal transfer process of hybrid laser double GMA welding. The International Journal of Advanced Manufacturing Technology 77:5-8, pages 1019-1028.
Crossref
Crossref
Zhaodong Zhang, Fuqun Fan, Jining Wang & Liming Liu. (2015) Effects of Oxide on Plasma in Arc Welding With Activating Fluxes. IEEE Transactions on Plasma Science 43:1, pages 465-471.
Crossref
Crossref
Ying Zou, Rintaro Ueji & Hidetoshi Fujii. (2015) Mechanical properties of advanced active-TIG welded duplex stainless steel and ferrite steel. Materials Science and Engineering: A 620, pages 140-148.
Crossref
Crossref
Yan Yin, Jin Guo Ta, Rui Hua Zhang & Zhan Chong Wang. (2014) A Study of Laser Aided Activating TIG Welding. Applied Mechanics and Materials 664, pages 117-121.
Crossref
Crossref
A. V. Santhana Babu, P. K. Giridharan, P. Ramesh Narayanan, S. V. S. Narayana Murty & V. M. J. Sharma. (2014) Experimental Investigations on Tensile Strength of Flux Bounded TIG Welds of AA2219-T87 Aluminum Alloy. Journal of Advanced Manufacturing Systems 13:02, pages 103-112.
Crossref
Crossref
Ying Zou, Rintaro Ueji & Hidetoshi Fujii. (2014) Effect of oxygen on weld shape and crystallographic orientation of duplex stainless steel weld using advanced A-TIG (AA-TIG) welding method. Materials Characterization 91, pages 42-49.
Crossref
Crossref
Yoshiaki Morisada, Hidetoshi Fujii & Ni Xukun. (2014) Development of simplified active flux tungsten inert gas welding for deep penetration. Materials & Design (1980-2015) 54, pages 526-530.
Crossref
Crossref
Dongjie Li, Shanping Lu, Dianzhong Li & Yiyi Li. (2014) Principles Giving High Penetration under the Double Shielded TIG Process. Journal of Materials Science & Technology 30:2, pages 172-178.
Crossref
Crossref
M. Zuber, V. Chaudhri, V. K. Suri & S. B. Patil. (2014) Effect of Flux Coated Gas Tungsten Arc Welding on 304L. International Journal of Engineering and Technology 6:3, pages 177-181.
Crossref
Crossref
Nirsanametla Yadaiah & Swarup Bag. (2013) Role of Oxygen as Surface-Active Element in Linear GTA Welding Process. Journal of Materials Engineering and Performance 22:11, pages 3199-3209.
Crossref
Crossref
Paulo J. Modenesi. (2013) A química da formação do cordão na soldagem TIG. Soldagem & Inspeção 18:3, pages 287-300.
Crossref
Crossref
Mingxuan Yang, Bojin Qi, Baoqiang Cong, Fangjun Liu, Zhou Yang & Paul K. Chu. (2013) Study on Electromagnetic Force in Arc Plasma With UHFP-GTAW of Ti-6Al-4V. IEEE Transactions on Plasma Science 41:9, pages 2561-2568.
Crossref
Crossref
Her-Yueh Huang & Chung-Wei Yang. (2013) Influence of Activating Flux and Helium Shielding Gas on an Austenitic Stainless Steel Weldment. Metallurgical and Materials Transactions B 44:3, pages 730-737.
Crossref
Crossref
Y. Zou, R. Ueji & H. Fujii. 2013. Proceedings of the 1st International Joint Symposium on Joining and Welding. Proceedings of the 1st International Joint Symposium on Joining and Welding
517
521
.
T. Sakthivel, M. Vasudevan, K. Laha, P. Parameswaran, K.S. Chandravathi, M.D. Mathew & A.K. Bhaduri. (2013) Effect of Joining Process on the Accumulation of Creep Deformation and Cavitation Across the Weld Joint of 316L(N) Stainless Steel. Procedia Engineering 55, pages 408-413.
Crossref
Crossref
Qiang Fu. (2012) Development and Application of Activating Fluxes in TIG Welding. Applied Mechanics and Materials 157-158, pages 21-26.
Crossref
Crossref
P. Vasantharaja & M. Vasudevan. (2012) Studies on A-TIG welding of Low Activation Ferritic/Martensitic (LAFM) steel. Journal of Nuclear Materials 421:1-3, pages 117-123.
Crossref
Crossref
V. Maduraimuthu, M. Vasudevan, V. Muthupandi, A. K. Bhaduri & T. Jayakumar. (2011) Effect of Activated Flux on the Microstructure, Mechanical Properties, and Residual Stresses of Modified 9Cr-1Mo Steel Weld Joints. Metallurgical and Materials Transactions B 43:1, pages 123-132.
Crossref
Crossref
Yoshihiro TSUJIMURA & Manabu TANAKA. (2012) Analysis of Behavior of Arc Plasma Conditions in MIG Welding with Metal Transfer. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 30:4, pages 288-297.
Crossref
Crossref
Yoshihiro TSUJIMURA & Manabu TANAKA. (2012) Analysis of behavior of plasma temperature field and concentration field of metal vapor in TIG welding. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 30:4, pages 281-287.
Crossref
Crossref
Masami Mizutani & Seiji Katayama. (2013) Tig Weld Penetration Improvement by Laser-Activated Process With Oxygen. Welding in the World 56:1-2, pages 21-29.
Crossref
Crossref
T. Sakthivel, M. Vasudevan, K. Laha, P. Parameswaran, K.S. Chandravathi, M.D. Mathew & A.K. Bhaduri. (2011) Comparison of creep rupture behaviour of type 316L(N) austenitic stainless steel joints welded by TIG and activated TIG welding processes. Materials Science and Engineering: A 528:22-23, pages 6971-6980.
Crossref
Crossref
Kuang Hung Tseng & Ko Jui Chuang. (2011) Study of Type 316L Stainless Steel TIG Welding with MoO<sub>3</sub> Powder. Advanced Materials Research 291-294, pages 901-904.
Crossref
Crossref
Rui-Hua Zhang, Ji-Luan Pan & Seiji Katayama. (2011) The mechanism of penetration increase in A-TIG welding. Frontiers of Materials Science 5:2, pages 109-118.
Crossref
Crossref
Wenchao Dong, Shanping Lu, Dianzhong Li & Yiyi Li. (2011) GTAW liquid pool convections and the weld shape variations under helium gas shielding. International Journal of Heat and Mass Transfer 54:7-8, pages 1420-1431.
Crossref
Crossref
Shanping LU, Wenchao DONG, Dianzhong LI & Yiyi LI. (2011) HIGH EFFICIENCY WELDING PROCESS FOR STAINLESS STEEL MATERIALS. ACTA METALLURGICA SINICA 46:11, pages 1347-1364.
Crossref
Crossref
Her-Yueh Huang. (2010) Argon-Hydrogen Shielding Gas Mixtures for Activating Flux-Assisted Gas Tungsten Arc Welding. Metallurgical and Materials Transactions A 41:11, pages 2829-2835.
Crossref
Crossref
Her-Yueh Huang. (2010) Research on the activating flux gas tungsten arc welding and plasma arc welding for stainless steel. Metals and Materials International 16:5, pages 819-825.
Crossref
Crossref
Wenchao Dong, Shanping Lu, Dianzhong Li & Yiyi Li. (2009) Modeling of the Weld Shape Development During the Autogenous Welding Process by Coupling Welding Arc with Weld Pool. Journal of Materials Engineering and Performance 19:7, pages 942-950.
Crossref
Crossref
Dong Jie Li, Shan Ping Lu, Dian Zhong Li & Yi Yi Li. (2010) Weld Pool Shape Variations and Electrode Protection in Double Shielded TIG Welding. Advanced Materials Research 97-101, pages 3978-3981.
Crossref
Crossref
Shanping Lu, Hidetoshi Fujii & Kiyoshi Nogi. (2010) Weld Shape Variation and Electrode Oxidation Behavior under Ar-(Ar-CO2) Double Shielded GTA Welding. Journal of Materials Science & Technology 26:2, pages 170-176.
Crossref
Crossref
Z.D. Zhang. 2010. Welding and Joining of Magnesium Alloys. Welding and Joining of Magnesium Alloys
253
273
.
Chuangxin Zhao & Ian Richardson. (2009) Complex Flow Motions During Laser Welding. Complex Flow Motions During Laser Welding.
Shanping Lu, Hidetoshi Fujii & Kiyoshi Nogi. (2009) Arc ignitability, bead protection and weld shape variations for He–Ar–O2 shielded GTA welding on SUS304 stainless steel. Journal of Materials Processing Technology 209:3, pages 1231-1239.
Crossref
Crossref
Zhaodong Zhang & Fan Zhang. (2009) Spectral Analysis of Welding Plasma of Magnesium Alloy Using Flux Coated Wire. MATERIALS TRANSACTIONS 50:8, pages 1909-1914.
Crossref
Crossref
Hidetoshi Fujii, Toyoyuki Sato, Shanping Lu & Kiyoshi Nogi. (2008) Development of an advanced A-TIG (AA-TIG) welding method by control of Marangoni convection. Materials Science and Engineering: A 495:1-2, pages 296-303.
Crossref
Crossref
Shanping Lu, Hidetoshi Fujii & Kiyoshi Nogi. (2008) Marangoni convection and weld shape variations in He–CO2 shielded gas tungsten arc welding on SUS304 stainless steel. Journal of Materials Science 43:13, pages 4583-4591.
Crossref
Crossref
S. W. Shyu, H. Y. Huang, K. H. Tseng & C.P. Chou. (2007) Study of the Performance of Stainless Steel A-TIG Welds. Journal of Materials Engineering and Performance 17:2, pages 193-201.
Crossref
Crossref
Hidenori Terasaki, Yu-ichi Komizo, Keita Saiki & Masahiko Ikeda. (2008) Development of Titanium Weld Metal Reinforced by Titanium Mono-boride. ISIJ International 48:5, pages 624-627.
Crossref
Crossref
Yong Huang, Ding Fan & Qinghua Fan. (2007) Study of mechanism of activating flux increasing weld penetration of AC A-TIG welding for aluminum alloy. Frontiers of Mechanical Engineering in China 2:4, pages 442-447.
Crossref
Crossref
L. M. Liu, Z. D. Zhang, G. Song & L. Wang. (2007) Mechanism and Microstructure of Oxide Fluxes for Gas Tungsten Arc Welding of Magnesium Alloy. Metallurgical and Materials Transactions A 38:3, pages 649-658.
Crossref
Crossref
M Tanaka & J J Lowke. (2007) Predictions of weld pool profiles using plasma physics. Journal of Physics D: Applied Physics 40:1, pages R1-R23.
Crossref
Crossref
Shanping LU, Hidetoshi FUJII, Kiyoshi NOGI & Toyoyuki SATO. (2007) Effect of Oxygen Content in He-O2 Shielding Gas on Weld Shape in Ultra-deep Penetration TIG Welding. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 25:1, pages 196-202.
Crossref
Crossref
R. H. Zhang & D. Fan. (2013) Numerical simulation of effects of activating flux on flow patterns and weld penetration in ATIG welding. Science and Technology of Welding and Joining 12:1, pages 15-23.
Crossref
Crossref
Shanping Lu, Hidetoshi Fujii & Kiyoshi Nogi. (2006) Marangoni Convection and Gas Tungsten Arc Weld Shape Variations on Pure Iron Plates. ISIJ International 46:2, pages 276-280.
Crossref
Crossref
Liming Liu, Zhaodong Zhang, Gang Song & Yong Shen. (2006) Effect of Cadmium Chloride Flux in Active Flux TIG Welding of Magnesium Alloys. MATERIALS TRANSACTIONS 47:2, pages 446-449.
Crossref
Crossref
J J Lowke, M Tanaka & M Ushio. (2005) Mechanisms giving increased weld depth due to a flux. Journal of Physics D: Applied Physics 38:18, pages 3438-3445.
Crossref
Crossref
Lu Shanping, Fujii Hidetoshi & Nogi Kiyoshi. (2005) Effects of CO2 shielding gas additions and welding speed on GTA weld shape. Journal of Materials Science 40:9-10, pages 2481-2485.
Crossref
Crossref
Shanping LU, Hidetoshi FUJII & Kiyoshi NOGI. (2005) Influence of Welding Parameters and Shielding Gas Composition on GTA Weld Shape. ISIJ International 45:1, pages 66-70.
Crossref
Crossref
Manabu Tanaka, Hidenori Terasaki, Ryuichi Narita, Kazuyuki Kobayashi, Hidetoshi Fujii & Masao Ushio. (2005) Anode Heat Transfer in TIG Arc and Its Effect on Weld Penetration. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 23:3, pages 398-404.
Crossref
Crossref
B.L. Jarvis & M. Tanaka. 2005. New Developments in Advanced Welding. New Developments in Advanced Welding
40
80
.
Manabu TANAKA, Masao USHIO & John James LOWKE. (2005) Numerical Analysis for Weld Formation Using a Free-Burning Helium Arc at Atmospheric Pressure. JSME International Journal Series B 48:3, pages 397-404.
Crossref
Crossref
Fan Ding & Huang Yong. (2013) Study on Activating Tig Welding for Aluminium Alloys. Welding in the World 49:1-2, pages 22-25.
Crossref
Crossref
Shanping Lu, Hidetoshi Fujii & Kiyoshi Nogi. (2004) Marangoni convection in weld pool in CO2-Ar-shielded gas thermal arc welding. Metallurgical and Materials Transactions A 35:9, pages 2861-2867.
Crossref
Crossref
Shanping Lu, Hidetoshi Fujii & Kiyoshi Nogi. (2004) Marangoni convection and weld shape variations in Ar–O2 and Ar–CO2 shielded GTA welding. Materials Science and Engineering: A 380:1-2, pages 290-297.
Crossref
Crossref
M. Ushio, M. Tanaka & J.J. Lowke. (2004) Anode Melting From Free-Burning Argon Arcs. IEEE Transactions on Plasma Science 32:1, pages 108-117.
Crossref
Crossref
Shanping Lu, Hidetoshi Fujii, Hiroyuki Sugiyama & Kiyoshi Nogi. (2003) Mechanism and optimization of oxide fluxes for deep penetration in gas tungsten arc welding. Metallurgical and Materials Transactions A 34:9, pages 1901-1907.
Crossref
Crossref
Manabu Tanaka, Hidenori Terasaki, Masao Ushio & John J. Lowke. (2002) A unified numerical modeling of stationary tungsten-inert-gas welding process. Metallurgical and Materials Transactions A 33:7, pages 2043-2052.
Crossref
Crossref
M. Marya. (2013) Theoretical and Experimental Assessment of Chloride Effects in the A-TIG Welding of Magnesium. Welding in the World 46:7-8, pages 7-21.
Crossref
Crossref
Shanping Lu, Hidetoshi Fujii, Hiroyuki Sugiyama, Manabu Tanaka & Kiyoshi Nogi. (2002) Weld Penetration and Marangoni Convection with Oxide Fluxes in GTA Welding. MATERIALS TRANSACTIONS 43:11, pages 2926-2931.
Crossref
Crossref