Advanced search
Publication Cover
Science and Technology of Welding and Joining Volume 9, 2004 - Issue 1
Journal homepage
1,972
Views
315
CrossRef citations to date
0
Altmetric
Articles

Nickel based superalloy welding practices for industrial gas turbine applications

M. B. Henderson
,
D. Arrell
,
R. Larsson
,
M. Heobel
&
G. Marchant
Pages 13-21 | Published online: 04 Dec 2013

Citations (315)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (17)

Zhongyi Liu, Quanquan Han, Zhenhua Zhang, Liqiao Wang, Teng Ma, Zhengjiang Gao, Bo Song, Hanlian Liu, Chuanzhen Huang & Rossitza Setchi. (2023) Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion. Virtual and Physical Prototyping 18:1.
Read now
J. F. S. Markanday. (2022) Applications of alloy design to cracking resistance of additively manufactured Ni-based alloys. Materials Science and Technology 38:16, pages 1300-1314.
Read now
Tushar Sonar, Malarvizhi Sudersanan & Visvalingam Balasubramanian. (2022) Influence of arc constriction current (ACC) on microstructural evolution and tensile properties of tungsten inert gas welded thin sheets of aerospace alloy. Australian Journal of Mechanical Engineering 20:5, pages 1329-1348.
Read now
A. K. Sahu, S. Bag & Ke Huang. (2020) Mitigation of micro-cracks in dissimilar welding of Inconel 718 and austenitic stainless steel. Philosophical Magazine Letters 100:8, pages 365-374.
Read now
M. Bemani & M. Pouranvari. (2020) Resistance spot welding of Nimonic 263 nickel-based superalloy: microstructure and mechanical properties. Science and Technology of Welding and Joining 25:1, pages 28-36.
Read now
Jiangping Yu, Donghong Wang, Dayong Li, Ding Tang, Guoliang Zhu, Anping Dong, Da Shu & Yinghong Peng. (2019) Process parameter effects on solidification behavior of the superalloy during investment casting. Materials and Manufacturing Processes 34:15, pages 1726-1736.
Read now
D. J. Tung, D. W. Mahaffey, O. N. Senkov, S. L. Semiatin & W. Zhang. (2019) Transient behaviour of torque and process efficiency during inertia friction welding. Science and Technology of Welding and Joining 24:2, pages 136-147.
Read now
Y. Ye, G. Zou, W. Long, Q. Jia, H. Bai, A. Wu & L. Liu. (2019) Diffusion brazing repair of IN738 superalloy with crack-like defect: microstructure and tensile properties at high temperatures. Science and Technology of Welding and Joining 24:1, pages 52-62.
Read now
E. V. Galieva, R. Ya. Lutfullin, A. Kh. Akhunova, V. A. Valitov & S. V. Dmitriev. (2018) Effect of surface relief on solid phase joining of heat-resistant nickel superalloys. Science and Technology of Welding and Joining 23:7, pages 612-618.
Read now
Y. Ye, J. Wei, G. Zou, W. Long, H. Bai, A. Wu & L. Liu. (2017) Microstructure of diffusion-brazing repaired IN738LC superalloy with uneven surface defect gap width. Science and Technology of Welding and Joining 22:7, pages 617-626.
Read now
Eduardo André Alberti, Leandro João da Silva & Ana Sofia C. M. D’Oliveira. (2016) Additive manufacturing: the role of welding in this window of opportunity. Welding International 30:6, pages 413-422.
Read now
V Jalilvand, H Omidvar, M R Rahimipour & H R Shakeri. (2013) Investigation on microstructural properties of transient liquid phase (TLP) bonded IN-738LC superalloy with AMS 4776 filler metal. Materials Science and Technology 29:4, pages 439-445.
Read now
. (2011) Letter to the Editor. Materials Science and Technology 27:10, pages 1610-1612.
Read now
M. Abdelfatah & O. A. Ojo. (2009) Formation of eutectic-type microconstituent during transient liquid phase bonding of nickel: influence of process parameters. Materials Science and Technology 25:1, pages 61-67.
Read now
C. Chen, H. C. Wu & M. F. Chiang. (2008) Laser cladding in repair of IN738 turbine blades. International Heat Treatment and Surface Engineering 2:3-4, pages 140-146.
Read now
F. Tancret & M. Bellini. (2008) Properties, processability and weldability of a novel affordable creep resistant nickel base superalloy. Materials Science and Technology 24:4, pages 479-487.
Read now
G. Madhusudhana Reddy, C. V. Srinivasa Murthy, N. Viswanathan & K. Prasad Rao. (2007) Effects of electron beam oscillation techniques on solidification behaviour and stress rupture properties of Inconel 718 welds. Science and Technology of Welding and Joining 12:2, pages 106-114.
Read now

Articles from other publishers (298)

Chunming Wang, Yongkang Xiao, Gaoyang Mi, Mingyang Zhang, Zhijia Hua & Yiyang Hu. (2024) Ti3SiC2 reinforced Inconel 625 composites prepared via laser directed energy deposition: New insights into microstructure evolution and mechanical properties. Journal of Alloys and Compounds 970, pages 172396.
Crossref
Yong-Seong Lee, Hyun-Jun Shim, Jeong Hyun Kim, Myeongjun Ji, Jongmin Byun & Young-In Lee. (2024) Spray pyrolysis-based synthesis of pure molybdenum powder with nanoscale primary particles and its sintering characteristics. International Journal of Refractory Metals and Hard Materials 118, pages 106492.
Crossref
Dinesh Lanka, Damodaram R.Sivaprasad K.Prashanth K.G.. (2023) Microstructural and mechanical behaviour of friction welded SS316L components fabricated by selective laser melting. Materials Today Communications 37, pages 107430.
Crossref
Yuting Lv, Yaojie Liu, Qiang Zhang, Hongyao Yu, Rui Wang, Guangbao Sun & Guijiang Wei. (2023) Effect of hot isostatic pressing on the microstructures and mechanical properties of TiC/GTD222 composite fabricated by selective laser melting. Journal of Alloys and Compounds 968, pages 171776.
Crossref
M. Naalchian, M. Kasiri-Asgarani, H.R. Bakhsheshi-Rad & J. Manshaee. (2023) Comprehensive microstructural and mechanical characterization of transient liquid phase bonded austenitic stainless steel by Ni–Cr–Si–B amorphous interlayer. International Journal of Pressure Vessels and Piping 206, pages 105078.
Crossref
Wenbin Tai, Rui Zhang, Chuanyong Cui, Zijian Zhou, Yizhou Zhou & Xiaofeng Sun. (2023) Solidification Segregation Behavior and Homogenization Process of a Difficult-to-Deform Superalloy Used at 850 °C. Crystals 13:11, pages 1582.
Crossref
G. Sathishkumar, P. Sathiya & S. Senthil Murugan. (2023) Evaluation of Mechanical and Microstructural Properties of High-Temperature Hastelloy X Alloy-Welded Joints Made by Laser Welding Process. Journal of Testing and Evaluation 51:6, pages 20220653.
Crossref
Himanshu Sharma, Jonny Singla, Vikrant Singh, Jagtar Singh, Hitesh Kumar, Anuj Bansal, Anil Kumar Singla, Deepak Kumar Goyal & Munish Kumar Gupta. (2023) Influence of post heat treatment on metallurgical, mechanical, and corrosion analysis of wire arc additive manufactured inconel 625. Journal of Materials Research and Technology 27, pages 5910-5923.
Crossref
J. Schmitt, J. Fiebig, S. Schrüfer, O. Guillon & R. Vaßen. (2023) Adjusting Residual Stresses During Cold Spray Deposition of IN718. Journal of Thermal Spray Technology.
Crossref
Jing Peng, Ruochen Wu, Jiayi Zhang & Hualin Cai. (2023) High-temperature mechanical properties and microstructure of welded joint in GH4169/IC10 dissimilar nickel-based superalloys by vacuum electron beam welding. Materials Science and Engineering: A 884, pages 145561.
Crossref
Dan Zhao, Fei Liu, Yuan-Biao Tan, Wei Shi & Song Xiang. (2023) Improving the strength-ductility synergy and corrosion resistance of Inconel 718/316L dissimilar laser beam welding joint via post-weld heat treatment. Journal of Materials Research and Technology 26, pages 71-87.
Crossref
Fatih Uzun, Hector Basoalto, Konstantinos Liogas, Jingwei Chen, Igor P. Dolbnya, Zifan Ivan Wang & Alexander M. Korsunsky. (2023) Voxel-based full-field eigenstrain reconstruction of residual stresses in additive manufacturing parts using height digital image correlation. Additive Manufacturing 77, pages 103822.
Crossref
Constantin Zenz, Michele Buttazzoni, Mario Martínez Ceniceros, Rodrigo Gómez Vázquez, Jose Ramón Blasco Puchades, Luis Portolés Griñán & Andreas Otto. (2023) Simulation-based process optimization of laser-based powder bed fusion by means of beam shaping. Additive Manufacturing 77, pages 103793.
Crossref
S.N.S. Santhosh Kumar, J. Venkatesh, V. Rahul, Bh.Saroja Rani, K.Ramya Sree, V.R. Navaneeth & S. Ram. (2023) Microstructure and fracture analysis on MIG welding of Nimonic alloys. Materials Today: Proceedings.
Crossref
Shulei Yang, Qiang Tian, Shufeng Yang, Kyung-Woo Yi, Wei Liu, Jingshe Li & Mengjing Zhao. (2023) Study on the Nucleation Mechanism of Carbonitrides on LaAlO3 in GH4742 superallloy. Journal of Materials Research and Technology.
Crossref
R.M. Kindermann, M.J. Roy, R. Morana, J.A. Francis & P.B. Prangnell. (2023) Wire-arc directed energy deposition of Inconel 718: Effects of heat input and build interruptions on mechanical performance. Additive Manufacturing 76, pages 103765.
Crossref
AK Sahu & S Bag. (2022) Influence of heat input on intermetallic formation in dissimilar autogenous laser welding between Inconel 718 and AISI 316L steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 237:9, pages 1422-1435.
Crossref
Amir Mostafaei, Reza Ghiaasiaan, I-Ting Ho, Seth Strayer, Kai-Chun Chang, Nima Shamsaei, Shuai Shao, Santanu Paul, An-Chou Yeh, Sammy Tin & Albert C. To. (2023) Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship. Progress in Materials Science 136, pages 101108.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Thiruvenkatam Venkateswaran, Vincent Xavier, Muthumanickam Agilan, Anandan Manjunath, Mikhail Ivanov & Ilsiya Suleymanova. (2023) Minimizing intermetallic Laves phase evolution and enhancing precipitation strengthening of Superalloy-718 joints using InterPulse magnetic arc constriction and high frequency pulsation. Materials Science and Engineering: A 880, pages 145323.
Crossref
Ion Mitelea, Lucian Călin Burcă, Mircea Burcă, Corneliu Marius Crăciunescu & Ion-Dragoș Uţu. (2023) Process parameters, structure and mechanical properties of dissimilar Nimonic 80 A/AISI 316 L resistance welded joints. Materials Testing 65:6, pages 911-923.
Crossref
Sanxuan Han, Xiaowei Lei, Wenchao Xia, Jiachen Guo, Ruining Yang, Jingbo Liu, Wenjing Yao & Nan Wang. (2023) Optimizing the electrochemical corrosion performance of laser cladded Ni-based single crystal superalloy via manipulation of γ′(Ni3Al) phase. Surface and Coatings Technology, pages 129700.
Crossref
Sanxuan Han, Jie Zhang, Xiaowei Lei, Ruining Yang & Nan Wang. (2023) Insight into the anisotropic electrochemical corrosion behaviors of laser metal deposited Ni-based single crystal superalloy. Corrosion Science 217, pages 111111.
Crossref
Bin Zhang, Huan Ding, Andrew C. Meng, Saber Nemati, Shengming Guo & W.J. Meng. (2023) Crack reduction in Inconel 939 with Si addition processed by laser powder bed fusion additive manufacturing. Additive Manufacturing 72, pages 103623.
Crossref
Lova Chechik, Katerina A. Christofidou, Lucy Farquhar, Martin Tse, Gavin Baxter & Iain Todd. (2023) Tools for the Assessment of the Laser Printability of Nickel Superalloys. Metallurgical and Materials Transactions A 54:6, pages 2421-2437.
Crossref
Bikash Kumar, Shreehard Sahu, Dheepa Srinivasan & Balila Nagamani Jaya. (2023) Influence of Heat Input on Solidification Cracking in Additively Manufactured CM247LC Ni-based Superalloy. Metallurgical and Materials Transactions A 54:6, pages 2394-2409.
Crossref
Jinjun Xu, Jiayi Liu, Lihong Yu, Yang Zhan, Kun Gao, Zhipeng Zhou, Lan Huang & Qian Lei. (2023) Microstructure and mechanical properties of laser-assisted epitaxial growth of nickel-based single crystal superalloys. Journal of Materials Research and Technology 24, pages 1910-1921.
Crossref
Bhavana Unikela, Harish Chandra Dey & Shaju K. Albert. (2023) Microstructure and mechanical properties characterization of aged and repair welded Alloy 617M. Welding in the World 67:5, pages 1155-1168.
Crossref
Markus Ramsperger & Simon Eichler. (2023) Electron Beam Based Additive Manufacturing of Alloy 247 for Turbine Engine Application: From Research towards Industrialization. Metallurgical and Materials Transactions A 54:5, pages 1730-1743.
Crossref
Satoshi Utada, Ryo Sasaki, Roger C. Reed & Yuanbo T. Tang. (2022) In-Situ Monitoring of Phase Transition and Microstructure Evolution in Ni-Based Superalloys by Electrical Resistivity: Direct Comparison With Differential Scanning Calorimetry and Application to Case Studies. Metallurgical and Materials Transactions A 54:5, pages 1549-1567.
Crossref
Alessandro M. Ralls, Mohammadreza Daroonparvar, Merbin John, Soumya Sikdar & Pradeep L. Menezes. (2023) Solid-State Cold Spray Additive Manufacturing of Ni-Based Superalloys: Processing–Microstructure–Property Relationships. Materials 16:7, pages 2765.
Crossref
Samet NOHUTÇU, Ramazan KAÇAR & Hayriye ERTEK EMRE. (2023) Haynes 188 Kobalt Esaslı Süperalaşım ile AISI 316L Ostenitik Paslanmaz Çeliğin Kaynak EdilebilirliğiWeldability of Haynes 188 Cobalt Based Superalloy and AISI 316L Austenitic Stainless Steel. Journal of Polytechnic.
Crossref
Miao Yang, Teng Zhang, Ran Ding, Zhixia Qiao, Chenxi Liu & Yongchang Liu. (2023) Microstructure Evolution of Athermal Solidification Zone and Its Effect on Mechanical Properties in Dissimilar Transient Liquid Phase Bonded Joint of IN718 Ni-Based Alloy/316LN Steel. Journal of Materials Engineering and Performance.
Crossref
Shahir Mohd Yusuf, Nurainaa Mazlan, Nur Hidayah Musa, Xiao Zhao, Ying Chen, Shoufeng Yang, Nur Azmah Nordin, Saiful Amri Mazlan & Nong Gao. (2023) Microstructures and Hardening Mechanisms of a 316L Stainless Steel/Inconel 718 Interface Additively Manufactured by Multi-Material Selective Laser Melting. Metals 13:2, pages 400.
Crossref
Minho Bang, Seungyeong Choi, Seok Min Choi, Dong-Ho Rhee, Hee Koo Moon & Hyung Hee Cho. (2023) Augmented cooling performance in gas turbine blade tip with slot cooling. International Journal of Heat and Mass Transfer 201, pages 123664.
Crossref
Pietro Antonio Martelli, Antonio Sivo, Flaviana Calignano, Emilio Bassini, Sara Biamino & Daniele Ugues. (2023) Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF). Metals 13:2, pages 210.
Crossref
Yaojie Wen, Jianbao Gao, Ramasubramanian Lakshmi Narayan, Pei Wang, Lijun Zhang, Baicheng Zhang, Upadrasta Ramamurty & Xuanhui Qu. (2023) Microstructure-property correlations in as-built and heat-treated compositionally graded stainless steel 316L-Inconel 718 alloy fabricated by laser powder bed fusion. Materials Science and Engineering: A 862, pages 144515.
Crossref
Lucian Călin Burcă, Olimpiu Karancsi, Ion Mitelea, Ion-Dragoş Uţu & Mircea Burcă. (2023) Structural transformations in resistance spot-welded joints from Nimonic 80A superalloys. Materials Today: Proceedings 78, pages 274-281.
Crossref
Zhiguo Chen, Wenjie Li, Li Wang, Xiang Wei & Zhiwei Liu. (2023) Investigation on the hot crack sensitivity of a nickel-based single crystal superalloy fabricated by epitaxial laser metal forming. Journal of Alloys and Compounds 931, pages 167436.
Crossref
Minho Bang, Seungyeong Choi, Seok Min Choi, Hee Koo Moon & Hyung Hee Cho. (2023) Enhancement of blade tip cooling with different position on tip cooling slot. International Journal of Heat and Mass Transfer 200, pages 123500.
Crossref
Kadivendi Srinivas, Pandu R. Vundavilli & M. Manzoor Hussain. (2022) Experimental investigation on microstructural characterization and mechanical properties of plasma arc welded Inconel 617 plates. High Temperature Materials and Processes 41:1, pages 683-693.
Crossref
S. Tao, R. Gao, H. Peng, H. Guo & B. Chen. (2022) High-reliability repair of single-crystal Ni-base superalloy by selective electron beam melting. Materials & Design 224, pages 111421.
Crossref
Maryam Avateffazeli, Garrett Webster, Kamin Tahmasbi & Meysam Haghshenas. (2022) Very high cycle fatigue at elevated temperatures: A review on high temperature ultrasonic fatigue. Journal of Space Safety Engineering 9:4, pages 488-512.
Crossref
Qingsong Wei, Yin Xie, Qing Teng, Muyu Shen, Shanshan Sun & Chao Cai. (2022) Crack Types, Mechanisms, and Suppression Methods during High-energy Beam Additive Manufacturing of Nickel-based Superalloys: A Review. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 1:4, pages 100055.
Crossref
Zhaoyang Liu, Zhongwei Liang, Tao Zou & Xiaochu Liu. (2022) Control of the Molten Pool Morphology and Crystal Growth Behavior in Laser Powder Deposition of Single-Crystal Superalloy via Adjusting the Defocusing Amount and Scanning Speed. Journal of Thermal Spray Technology 31:8, pages 2594-2608.
Crossref
Lukas Haußmann, Bernd Burbaum, Britta Stöhr, Andreas Förner, Lisa Freund, Mathias Göken & Steffen Neumeier. (2022) Crack‐Free Welding of a Co‐Base Superalloy with High γ' Precipitate Fraction. Advanced Engineering Materials 24:12.
Crossref
Yu. V. Fal’chenko, L. V. Petrushynets’, T. V. Mel’nichenko, O. O. Novomlynets’ & V. Ye. Fedorchuk. (2022) Influence of Diffusion Welding Parameters on the Structure of Nichrome Powder Alloy Joints. METALLOFIZIKA I NOVEISHIE TEKHNOLOGII 44:8, pages 1013-1023.
Crossref
Alexander Khaimovich, Igor Shishkovsky, Yaroslav Erisov, Anton Agapovichev, Vitaliy Smelov & Vasilii Razzhivin. (2022) Research on Cracked Conditions in Nickel Chrome Alloy Ni50Cr33W4.5Mo2.8TiAlNb, Obtained by Direct Laser Deposition. Metals 12:11, pages 1902.
Crossref
Nan Song, Haichuan Shi, Peilei Zhang, Zhishui Yu, Boyu Wang, Qiran Cheng & Zhongwen Li. (2022) Microstructure and Properties of Vacuum-Brazed Joints of 3D-Structured Ni718 High-Temperature Alloy Prepared by Selective Laser Melting. Journal of Materials Engineering and Performance 31:10, pages 7921-7934.
Crossref
Ryszard Sitek, Jakub Ciftci, Dorota Moszczyńska, Piotr Maj, Ewa Ura-Bińczyk, Piotr Warzybok, Iwona Cieślik, Paweł Wiśniewski & Jarosław Mizera. (2022) Effect of annealing on the microstructure and properties of IN 625 specimens manufactured by selective laser melting. Archives of Civil and Mechanical Engineering 22:4.
Crossref
Yachao Wang, Sougata Roy, Hyunsuk Choi & Touhid Rimon. (2022) Cracking suppression in additive manufacturing of hard-to-weld nickel-based superalloy through layer-wise ultrasonic impact peening. Journal of Manufacturing Processes 80, pages 320-327.
Crossref
Venkatesan Kannan. (2022) Experimental Study of an Eco-friendly Turning Process of Nimonic 75 Combining Minimum Quantity Lubrication and Hexagonal Boron Nitride-Enhanced Neem and Jatropha Oil Nanofluids. Journal of The Institution of Engineers (India): Series C 103:4, pages 785-812.
Crossref
Wulin Zhang, Xuanguo Wang & Jiaqiang Si. (2022) Properties of Hastelloy joint welded via laser wire‐filling. Materials and Corrosion 73:7, pages 1144-1152.
Crossref
G N ShivaKumar & G Rajamurugan. (2022) Friction stir welding of dissimilar alloy combinations—A Review. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:12, pages 6688-6705.
Crossref
Haijing Zhou, Chao Tang, Xiaomeng Zhang, Jinglong Qu, Jinhui Du, Zhongnan Bi & Ji Zhang. (2022) The evolution of microstructural parameters and mechanical properties of inertia friction welded GH4151. Results in Materials 14, pages 100272.
Crossref
Abyaz Abid & Md Tanbir Sarowar. (2022) Heat Transfer, Thermal Stress and Failure Inspection of a Gas Turbine Compressor Stator Blade Made of Five Different Conventional Superalloys and Ultra-High-Temperature Ceramic Material: A Direct Numerical Investigation. Journal of Failure Analysis and Prevention 22:3, pages 878-898.
Crossref
Prveen Bidare, Aldi Mehmeti, Amaia Jiménez, Sheng Li, Chris Garman, Stefan Dimov & Khamis Essa. (2022) High-density direct laser deposition (DLD) of CM247LC alloy: microstructure, porosity and cracks. The International Journal of Advanced Manufacturing Technology 120:11-12, pages 8063-8074.
Crossref
Dominik Dworschak, Marina Bishara, Hsiu‐Wei Cheng & Markus Valtiner. (2022) Combining AFM imaging and elementally resolved spectroelectrochemistry for understanding stability and quality of passive films formed on Alloy 600. Materials and Corrosion 73:6, pages 842-850.
Crossref
Zhipeng Zhou, Qian Lei, Longfei Zhang, Zhenshan Cui, Yijing Shang, Huan Qi, Yunping Li, Liang Jiang, Venkata Karthik Nadimpalli & Lan Huang. (2022) Microstructural evolution of nickel-based single crystal superalloy fabricated by directed energy deposition during heat treatment. Journal of Alloys and Compounds 904, pages 163943.
Crossref
Jung-Uk Lee, Young-Kyun Kim, Seong-Moon Seo & Kee-Ahn Lee. (2022) Effects of hot isostatic pressing treatment on the microstructure and tensile properties of Ni-based superalloy CM247LC manufactured by selective laser melting. Materials Science and Engineering: A 841, pages 143083.
Crossref
R.M. Kindermann, M.J. Roy, R. Morana & J.A. Francis. (2022) Effects of microstructural heterogeneity and structural defects on the mechanical behaviour of wire + arc additively manufactured Inconel 718 components. Materials Science and Engineering: A 839, pages 142826.
Crossref
Xiaofeng Dang, Yao Li, Kai Chen, Sihai Luo, Xiaoqing Liang & Weifeng He. (2022) Insight into the interfacial architecture of a hybrid additively- manufactured stainless steel/Ni-based superalloy bimetal. Materials & Design 216, pages 110595.
Crossref
Amir Mostafaei, Cang Zhao, Yining He, Seyed Reza Ghiaasiaan, Bo Shi, Shuai Shao, Nima Shamsaei, Ziheng Wu, Nadia Kouraytem, Tao Sun, Joseph Pauza, Jerard V. Gordon, Bryan Webler, Niranjan D. Parab, Mohammadreza Asherloo, Qilin Guo, Lianyi Chen & Anthony D. Rollett. (2022) Defects and anomalies in powder bed fusion metal additive manufacturing. Current Opinion in Solid State and Materials Science 26:2, pages 100974.
Crossref
Manu Srivastava & Sandeep Rathee. (2021) Additive manufacturing: recent trends, applications and future outlooks. Progress in Additive Manufacturing 7:2, pages 261-287.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran & Dhenuvakonda Sivakumar. (2022) Optimization of CA-TIG welding parameters to predict and maximize tensile properties of super alloy 718 sheets for gas turbine applications. Aircraft Engineering and Aerospace Technology 94:5, pages 806-823.
Crossref
Santhosh Banoth, Thaviti Naidu Palleda, Takuma Saito, Hideyuki Murakami & Koji Kakehi. (2022) Effects of yttrium and silicon contents in Hastelloy-X built by selective laser melting process. Journal of Alloys and Compounds 896, pages 163050.
Crossref
Maohang Zhang, Baicheng Zhang, Yaojie Wen & Xuanhui Qu. (2022) Research progress on selective laser melting processing for nickel-based superalloy. International Journal of Minerals, Metallurgy and Materials 29:3, pages 369-388.
Crossref
D. A. Baranov, S. S. Zhatkin, K. V. Nikitin, A. A. Parkin, E. Yu. Shchedrin & V. B. Deev. (2022) Study on the Influence of Different Energy Sources on the Structure and Mechanical Properties of a Welded Joint from an EP693 Nickel Alloy. Russian Journal of Non-Ferrous Metals 63:1, pages 57-62.
Crossref
Kaustubh Samvatsar & Harsh Dave. (2022) Study on Defect Reduction in Casting of Ni-Cr alloy (UNS N06003). IOP Conference Series: Materials Science and Engineering 1225:1, pages 012065.
Crossref
Qun Yu, Cunshan Wang, Guang Yang, Yuhang Ren, Ningxia Liu, Yanpeng Liang & Chuang Dong. (2022) Influence of Cr/Mo ratio on microstructure and mechanical properties of the Ni-based superalloys fabricated by laser additive manufacturing. Journal of Alloys and Compounds 894, pages 162484.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran, Dhenuvakonda Sivakumar & A. Manjunath. (2022) Multi-objective mathematical modeling and optimization of delta straight InterPulse-GTCAW parameters to predict and maximize performance of high temperature aerospace alloy sheets for structural applications. Forces in Mechanics 6, pages 100059.
Crossref
Rafaela dos Santos Silva, Rudineli Demarque, Leonardo Martins da Silva & José Adilson de Castro. (2022) Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process. Soldagem & Inspeção 27.
Crossref
P. Ferro, G. Edison, H. Vemanaboina, F. Bonollo, F. Berto, K. Tang & Z. Du. (2022) 3D Computational Welding Mechanics applied to IN625 Nickel-Base Alloy. Procedia Structural Integrity 42, pages 259-269.
Crossref
J.T. Winowlin Jappes, A. Ajithram, M. Adamkhan & D. Reena. (2022) Welding on Ni based super alloys – A review. Materials Today: Proceedings 60, pages 1656-1659.
Crossref
A.T. Clare, R.S. Mishra, M. Merklein, H. Tan, I. Todd, L. Chechik, J. Li & M. Bambach. (2022) Alloy design and adaptation for additive manufacture. Journal of Materials Processing Technology 299, pages 117358.
Crossref
J.A.S.B. Cardoso, A. Almeida & R. Vilar. (2022) Microstructure of a coated single crystalline René N5 part repaired by epitaxial laser deposition. Additive Manufacturing 49, pages 102515.
Crossref
I. V. Manoj & S. Narendranath. 2022. Composite Materials for Extreme Loading. Composite Materials for Extreme Loading 187 197 .
Natalia Zaichuk, Sergii Shymchuk, Anatolii Tkachuk, Yurii Shymchuk & Karim Kashash Badir. 2022. Advanced Manufacturing Processes III. Advanced Manufacturing Processes III 383 392 .
Julius Hendl, Axel Marquardt, Robin Willner, Elena Lopez, Frank Brueckner & Christoph Leyens. 2022. Handbook of Nondestructive Evaluation 4.0. Handbook of Nondestructive Evaluation 4.0 665 696 .
Chengxun Zhang, Zhijun Qiu, Hanliang Zhu, Zhiyang Wang, Ondrej Muránsky, Mihail Ionescu, Zengxi Pan, Jiangtao Xi & Huijun Li. (2021) On the Effect of Heat Input and Interpass Temperature on the Performance of Inconel 625 Alloy Deposited Using Wire Arc Additive Manufacturing–Cold Metal Transfer Process. Metals 12:1, pages 46.
Crossref
D. А. BaranovS. S. ZhatkinK. V. NikitinA. A. ParkinE. Yu. Shchedrin & V. B. Deev. (2021) Study into the effect of different energy sources on the structure and mechanical properties of EP693 nickel alloy weld joint. Izvestiya Vuzov. Tsvetnaya Metallurgiya (Universities' Proceedings Non-Ferrous Metallurgy) 27:6, pages 22-30.
Crossref
Abdullah Alhuzaim, Stano Imbrogno & Moataz M. Attallah. (2021) Direct laser deposition of crack-free CM247LC thin walls: Mechanical properties and microstructural effects of heat treatment. Materials & Design 211, pages 110123.
Crossref
Ateekh Ur Rehman, Nagumothu Kishore Babu, Mahesh Kumar Talari, Saqib Anwar, Yusuf Usmani & Ali M. Al-Samhan. (2021) Dissimilar Rotary Friction Welding of Inconel 718 to F22 Using Inconel 625 Interlayer. Applied Sciences 11:22, pages 10684.
Crossref
Eun-Joon Chun, Ye-Seon Jeong, Kyeong-Min Kim, Hyungsoo Lee & Seong-Moon Seo. (2021) Suppression of liquation cracking susceptibility via pre-weld heat treatment for manufacturing of CM247LC superalloy turbine blade welds. Journal of Advanced Joining Processes 4, pages 100069.
Crossref
Alex Anandaraj J, S Rajakumar, V Balasubramanian & S Kavitha. (2021) Influence of process parameters on hot tensile behavior of rotary friction welded In 718/AISI 410 dissimilar joints. CIRP Journal of Manufacturing Science and Technology 35, pages 830-838.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran & Dhenuvakonda Sivakumar. (2021) Maximizing strength and corrosion resistance of InterPulsed TIG welded Superalloy 718 joints by RSM for aerospace applications. CIRP Journal of Manufacturing Science and Technology 35, pages 474-493.
Crossref
M.Z. Ghodsi, S. Khademzadeh, E. Marzbanrad, M.H. Razmpoosh, N. De Marchi & E. Toyserkani. (2021) Development of Yttria-stabilized zirconia reinforced Inconel 625 metal matrix composite by laser powder bed fusion. Materials Science and Engineering: A 827, pages 142037.
Crossref
Li Lu, Zhipeng Cai, Jia Yang, Zhenxin Liang, Qian Sun & Jiluan Pan. (2021) Study on the Hot Cracking Law of Inconel 690/52M Welding Material on F304LN Base Metal by Multi-Layer Cladding. Metals 11:10, pages 1540.
Crossref
Rohith Sheshadri, Mohan Nagaraj, Avinash Lakshmikanthan, Manjunath Patel Gowdru Chandrashekarappa, Danil Yu Pimenov, Khaled Giasin, Raghupatruni Venkata Satya Prasad & Szymon Wojciechowski. (2021) Experimental investigation of selective laser melting parameters for higher surface quality and microhardness properties: taguchi and super ranking concept approaches. Journal of Materials Research and Technology 14, pages 2586-2600.
Crossref
Dominik Dworschak, Hsiu-Wei Cheng, Ching-Shun Ku, Ching-Yu Chiang, Chia-Hsien Lin & Markus Valtiner. (2021) Comparison of elemental resolved non-confined and restricted electrochemical degradation of nickel base alloys. Corrosion Science 190, pages 109629.
Crossref
Zhi Guo Gao. (2021) Numerical Analysis of Microstructure Anomalies during Laser Welding Nickel-Based Single-Crystal Superalloy Part III: Amelioration of Solidification Behavior. Materials Science Forum 1041, pages 47-56.
Crossref
Shuzhe Zhang, Yunpei Lei, Zhen Chen, Pei Wei, Wenjie Liu, Sen Yao & Bingheng Lu. (2021) Effect of Laser Energy Density on the Microstructure and Texture Evolution of Hastelloy-X Alloy Fabricated by Laser Powder Bed Fusion. Materials 14:15, pages 4305.
Crossref
Aprilia Aprilia, Jin Lee Tan, Yongjing Yang, Sung Chyn Tan & Wei Zhou. (2021) Induction Brazing for Rapid Localized Repair of Inconel 718. Metals 11:7, pages 1096.
Crossref
Ye-Seon Jeong, Kyeong-Min Kim, Hyungsoo Lee, Seong-Moon Seo & Eun-Joon Chun. (2021) Evaluation and Control of Liquation Cracking Susceptibility for CM247LC Superalloy Weld Heat-Affected Zone via Visualization-Based Varestraint Test. Korean Journal of Metals and Materials 59:7, pages 445-458.
Crossref
M. Mohsin Raza & Yu-Lung Lo. (2021) Experimental investigation into microstructure, mechanical properties, and cracking mechanism of IN713LC processed by laser powder bed fusion. Materials Science and Engineering: A 819, pages 141527.
Crossref
Mingyue Wen, Yuan Sun, Jinjiang Yu, Shulin Yang, Xingyu Hou, Yanhong Yang, Xiaofeng Sun & YiZhou Zhou. (2021) Amelioration of weld-crack resistance of the M951 superalloy by engineering grain boundaries. Journal of Materials Science & Technology 78, pages 260-267.
Crossref
Tushar Sonar, Visvalingam BalasubramanianSudersanan MalarvizhiThiruvenkatam Venkateswaran & Dhenuvakonda Sivakumar. (2021) Influence of InterPulsed TIG Welding Parameters on the Evolution of Microstructure and Tensile Properties of Su-718 Alloy Sheets. Materials Performance and Characterization 10:2, pages 20200083.
Crossref
Martin Nicolaus, Kai Möhwald & Hans Jürgen Maier. (2021) Thermally Sprayed Nickel-Based Repair Coatings for High-Pressure Turbine Blades: Controlling Void Formation during a Combined Brazing and Aluminizing Process. Coatings 11:6, pages 725.
Crossref
Bing Wei, Zuming Liu, Bizhong Nong, Bin Cao, Xueqian Lv, Yake Ren & Yongkang Ai. (2021) Microstructure, cracking behavior and mechanical properties of René 104 superalloy fabricated by selective laser melting. Journal of Alloys and Compounds 867, pages 158377.
Crossref
Suhas Sreekanth, Kjell Hurtig, Shrikant Joshi & Joel Andersson. (2021) Influence of laser-directed energy deposition process parameters and thermal post-treatments on Nb-rich secondary phases in single-track Alloy 718 specimens. Journal of Laser Applications 33:2.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran & Dhenuvakonda Sivakumar. (2021) Effect of welding parameters on microstructure and tensile properties of CA-TIG welded AMS-5596 grade thin high temperature alloy sheets for gas turbine engine applications. Advances in Industrial and Manufacturing Engineering 2, pages 100035.
Crossref
Mostafa Amirjan & Masoumeh Khodabandeh. (2021) Direct metal deposition of IN625 on IN738LC superalloy: microstructure and crack analysis. Applied Physics A 127:5.
Crossref
Troy Y. Ansell. (2021) Current Status of Liquid Metal Printing. Journal of Manufacturing and Materials Processing 5:2, pages 31.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran & Dhenuvakonda Sivakumar. (2021) An overview on welding of Inconel 718 alloy - Effect of welding processes on microstructural evolution and mechanical properties of joints. Materials Characterization 174, pages 110997.
Crossref
Ye Eun Jeong, Jun Yeop Lee, Eun Kyung Lee & Do Sik Shim. (2021) Microstructures and Mechanical Properties of Deposited Fe-8Cr-3V-2Mo-2W on SCM420 Substrate Using Directed Energy Deposition and Effect of Post-Heat Treatment. Materials 14:5, pages 1231.
Crossref
Wenjun Sun, Jijun Xin, Shanlin Wang, Yuhua Chen & Yongde Huang. (2021) Effect of deposited layer thickness on the microstructure and mechanical properties of IC10 single-crystal Ni3Al-based alloy electron beam-welded joint. Journal of Materials Research and Technology 11, pages 1206-1219.
Crossref
Santhosh Banoth, Thaviti Naidu Palleda, Sota Shimazu & Koji Kakehi. (2021) Yttrium’s Effect on the Hot Cracking and Creep Properties of a Ni-Based Superalloy Built Up by Additive Manufacturing. Materials 14:5, pages 1143.
Crossref
Ruaa H AL-Nafeay, Ahmed O AL-Roubaiy & H Omidvar. (2021) Overview of Joining and Repairing Techniques of Ni-Based Superalloy for Industrial Gas Turbine Applications. IOP Conference Series: Materials Science and Engineering 1094:1, pages 012141.
Crossref
J.C. Guo, P. Rong, L. Wang, W.J. Chen, S.X. Han, R.N. Yang, X.W. Lei, W.J. Yao & N. Wang. (2021) A comparable study on stray grain susceptibilities on different crystallographic planes in single crystal superalloys. Acta Materialia 205, pages 116558.
Crossref
Zhaoyang Liu & Qiang Zhu. (2021) Effect of Pulse Frequency on the Columnar-to-Equiaxed Transition and Microstructure Formation in Quasi-Continuous-Wave Laser Powder Deposition of Single-Crystal Superalloy. Metallurgical and Materials Transactions A 52:2, pages 776-788.
Crossref
Patxi Fernandez-Zelaia, Obed D. Acevedo, Michael M. Kirka, Donovan Leonard, Sean Yoder & Yousub Lee. (2021) Creep Behavior of a High-$$\gamma^{\prime}$$ Ni-Based Superalloy Fabricated via Electron Beam Melting. Metallurgical and Materials Transactions A 52:2, pages 574-590.
Crossref
G. Jangali Satish, V.N. Gaitonde & Vinayak N. Kulkarni. (2021) Traditional and non-traditional machining of nickel-based superalloys: A brief review. Materials Today: Proceedings 44, pages 1448-1454.
Crossref
Tom Saju & M. Velu. (2021) Review on welding and fracture of nickel based superalloys. Materials Today: Proceedings 46, pages 7161-7169.
Crossref
S. Sampath Kumar, C.B. Maheswaran & T. Deepan Bharathi Kannan. (2021) Experimental investigation on a pulsed TIG welding of Inconel 625. Materials Today: Proceedings 45, pages 2109-2114.
Crossref
G. Ashwin Prabhu, N. Sathishkumar, K. Pravinkumar, P. Manoj Kumar, T. Balasubramanian & P.L. Sudharsan. (2021) Heat treatment and analysis of nickel super alloy for gas turbine applications. Materials Today: Proceedings 39, pages 1417-1421.
Crossref
Zhipeng Zhou, Qian Lei, Zhou Yan, Zi Wang, Yijing Shang, Yunping Li, Huan Qi, Liang Jiang, Yong Liu & Lan Huang. (2021) Effects of process parameters on microstructure and cracking susceptibility of a single crystal superalloy fabricated by directed energy deposition. Materials & Design 198, pages 109296.
Crossref
Zhengwu Zhu, Xiuquan Ma, Ping Jiang, Gaoyang Mi & Chunming Wang. (2021) Planar-cellular-dendritic transformation in the fusion zone of a GH909 superalloy weldment. Journal of Materials Research and Technology 10, pages 960-975.
Crossref
Yuanbo T. Tang, Chinnapat Panwisawas, Joseph N. Ghoussoub, Yilun Gong, John W.G. Clark, André A.N. Németh, D. Graham McCartney & Roger C. Reed. (2021) Alloys-by-design: Application to new superalloys for additive manufacturing. Acta Materialia 202, pages 417-436.
Crossref
O.A. Ojo, N.L. Richards & K.R. Vishwakarma. 2021. Welding and Joining of Aerospace Materials. Welding and Joining of Aerospace Materials 199 228 .
Julius Raute, Torsten Jokisch, Angelina Marko, Max Biegler & Michael Rethmeier. (2020) Influence of electron beam welding parameters on the weld seam geometry of Inconel 718 at low feed rates. Materials Testing 62:12, pages 1221-1227.
Crossref
Lourdes Y. Herrera-Chávez, Alberto Ruiz, Víctor H. López-Morelos, Carlos Rubio-González, Martín R. Barajas-Álvarez & Arnoldo Bedolla Jacuinde. (2020) Microstructural and mechanical characterization of the effect of the welding process on creep behavior of welded joint and base metal specimens of Inconel 600. MRS Advances 5:59-60, pages 3003-3014.
Crossref
Wenjun Sun, Shanlin Wang, Min Hong, Jijun Xin, Yi Chen, Ziyang Zhang & Yuhua Chen. (2020) Effect of heat input on microstructure and mechanical properties of IC10 Ni3Al-based superalloy electron beam welding joint. Vacuum 182, pages 109765.
Crossref
Wei-Ying Chen, Xuan Zhang, Meimei Li, Ruqing Xu, Cang Zhao & Tao Sun. (2020) Laser powder bed fusion of Inconel 718 on 316 stainless steel. Additive Manufacturing 36, pages 101500.
Crossref
Zhaoyang Liu & Jiayang Shu. (2020) Effect of Pulse Frequency on the Transport Phenomena and Crystal Growth Behavior in Quasi-Continuous-Wave Laser Powder Deposition of Single-Crystal Superalloy. Metallurgical and Materials Transactions B 51:6, pages 2797-2810.
Crossref
Albert R. Khalikov, Evgeny A. Sharapov, Vener A. Valitov, Elvina V. Galieva, Elena A. Korznikova & Sergey V. Dmitriev. (2020) Simulation of Diffusion Bonding of Different Heat Resistant Nickel-Base Alloys. Computation 8:4, pages 102.
Crossref
Zhengwu Zhu, Xiuquan Ma, Gaoyang Mi & Chunming Wang. (2020) Electron microscopy study of laser welded GH909 superalloy joint. Journal of Materials Research and Technology 9:6, pages 15525-15536.
Crossref
Zhi-Yu Han, Ping-Xiang Zhang, Li-Ming Lei, Shu-Jin Liang, Qing-Xiang Wang, Yun-Jin Lai & Jin-Shan Li. (2020) Morphology and particle analysis of the Ni3Al-based spherical powders manufactured by supreme-speed plasma rotating electrode process. Journal of Materials Research and Technology 9:6, pages 13937-13944.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran & Dhenuvakonda Sivakumar. (2020) Development of 3-Dimensional (3D) response surfaces to maximize yield strength and elongation of InterPulsed TIG welded thin high temperature alloy sheets for jet engine applications. CIRP Journal of Manufacturing Science and Technology 31, pages 628-642.
Crossref
Nicole Marie Angel & Amrita Basak. (2020) On the Fabrication of Metallic Single Crystal Turbine Blades with a Commentary on Repair via Additive Manufacturing. Journal of Manufacturing and Materials Processing 4:4, pages 101.
Crossref
Mohsen K. Keshavarz, Alexandre Gontcharov, Paul Lowden & Mathieu Brochu. (2020) A Comparison of Weldability, Structure, and Mechanical Properties of CM64 and Tribaloy T-800 Welds for Hard-Facing of Turbine Blades. Journal of Manufacturing Science and Engineering 142:10.
Crossref
Tushar Sonar, Visvalingam Balasubramanian, Sudersanan Malarvizhi, Thiruvenkatam Venkateswaran & Dhenuvakonda Sivakumar. (2020) Multi-response mathematical modelling, optimization and prediction of weld bead geometry in gas tungsten constricted arc welding (GTCAW) of Inconel 718 alloy sheets for aero-engine components. Multiscale and Multidisciplinary Modeling, Experiments and Design 3:3, pages 201-226.
Crossref
Yanxin Qiao, Jie Huang, Ding Huang, Jian Chen, Wen Liu, Zhengbin Wang & Zheng Zhibin. (2020) Effects of Laser Scanning Speed on Microstructure, Microhardness, and Corrosion Behavior of Laser Cladding Ni45 Coatings. Journal of Chemistry 2020, pages 1-11.
Crossref
Caiyun Liu, Yuan Sun, Mingyue Wen, Tong He & Jinjiang Yu. (2020) Effect of Cr addition on microstructure and welding solidification cracking susceptibility of Co-Al-W based superalloys. Journal of Manufacturing Processes 56, pages 820-829.
Crossref
A. Senger, T. Jokisch, S. Olschok & U. Reisgen. (2020) Effect of the temperature gradient on hot cracking susceptibility for electron beam welding Alloy 247 LC. Materials Testing 62:7, pages 721-726.
Crossref
Wenhua Dai, Sun Wenjun, Jijun Xin, Shanlin Wang, Chao Fang, Jing Wei & Yuntao Song. (2020) Weldability and mechanical properties of IC10 single crystal and GH3039 superalloy dissimilar laser beam welding joint. Materials Science and Engineering: A 791, pages 139797.
Crossref
Bowen Cheng, Ji Gu & Min Song. (2020) An investigation of the microstructural evolution and tensile properties of a nickel-based GH648 superalloy manufactured through selective laser melting. Materials Science and Engineering: A 790, pages 139704.
Crossref
Fei Weng, Yongfeng Liu, Youxiang Chew, Xiling Yao, Shang Sui, Chaolin Tan, Fern Lan Ng & Guijun Bi. (2020) IN100 Ni-based superalloy fabricated by micro-laser aided additive manufacturing: Correlation of the microstructure and fracture mechanism. Materials Science and Engineering: A 788, pages 139467.
Crossref
Zhaoyang Liu & Jiayang Shu. (2020) Characterization of Microstructure, Precipitations and Microsegregation in Laser Additive Manufactured Nickel-Based Single-Crystal Superalloy. Materials 13:10, pages 2300.
Crossref
A. K. Sahu & S. Bag. (2020) Probe Pulse Conditions and Solidification Parameters for the Dissimilar Welding of Inconel 718 and AISI 316L Stainless Steel. Metallurgical and Materials Transactions A 51:5, pages 2192-2208.
Crossref
João G. Lopes & João Pedro Oliveira. (2020) A Short Review on Welding and Joining of High Entropy Alloys. Metals 10:2, pages 212.
Crossref
T. M. Harish, S. Jerome, B. Yadukrishna, Rishi S. Kumar, C. Midhun Suresh & Krishnakanth Ramesh. (2019) Influence of Keyhole Mode of Plasma Arc Welding on Microstructure and Mechanical Properties of Similar Butt-Welded Incoloy 800H. Arabian Journal for Science and Engineering 45:2, pages 1135-1142.
Crossref
B. Peters & G. Pozzetti. (2019) Numerical analysis of powder deposition in direct material injection. Granular Matter 22:1.
Crossref
Evren Yasa & Ozgur Poyraz. 2020. Additive Manufacturing Applications for Metals and Composites. Additive Manufacturing Applications for Metals and Composites 249 270 .
S. Sravan Sashank, S. Rajakumar, R. Karthikeyan & D. S. Nagaraju. (2020) Weldability, Mechanical Properties and Microstructure of Nickel Based Super Alloys: a review. E3S Web of Conferences 184, pages 01040.
Crossref
Aleksej Senger, Torsten Jokisch, Simon Olschok, Uwe Reisgen & Thomas Fischer. (2020) Hot-cracks reduction during Laser Beam Welding in vacuum of conventionally cast Alloy-247 LC. Procedia CIRP 94, pages 632-637.
Crossref
I. Buchbender, C. Hoff, J. Hermsdorf, V. Wesling & S. Kaierle. (2020) Single-crystal height extension by Laser Metal Deposition of CMSX-4. Procedia CIRP 94, pages 304-309.
Crossref
J.P. Oliveira, T.G. Santos & R.M. Miranda. (2020) Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice. Progress in Materials Science 107, pages 100590.
Crossref
M. Bemani & M. Pouranvari. (2020) Microstructure and mechanical properties of dissimilar nickel-based superalloys resistance spot welds. Materials Science and Engineering: A 773, pages 138825.
Crossref
Swagat Dwibedi, Bikash Kumar, Subrat Ranjan Bhoi, Soumya Ranjan Tripathy, Swadhin Pattanaik, Suraj Prasad & Rabindra Behera. (2020) To investigate the influence of weld time on joint characteristics of Hastelloy X weldments fabricated by RSW process. Materials Today: Proceedings 26, pages 2763-2769.
Crossref
Joseph N. Ghoussoub, Yuanbo T. Tang, Chinnapat Panwisawas, André Németh & Roger C. Reed. 2020. Superalloys 2020. Superalloys 2020 153 162 .
Michael M. Kirka, Patxi Fernandez-Zelaia, Yousub Lee, Peeyush Nandwana, Sean Yoder, Obed Acevedo & Daniel Ryan. 2020. Superalloys 2020. Superalloys 2020 1075 1084 .
Adarsh Shukla, Sanket Sarkar, A. Durga, Raghav Adharapurapu, Laura Dial & Sanjay K. Sondhi. 2020. Superalloys 2020. Superalloys 2020 1066 1074 .
M. Adam Khan, D. Chellaganesh, M. Uthayakumar, J. T. Winowlin Jappes & Muthukannan Duraiselvam. 2020. Materials Forming, Machining and Post Processing. Materials Forming, Machining and Post Processing 251 266 .
Nikola Kalentics, Navid Sohrabi, Hossein Ghasemi Tabasi, Seth Griffiths, Jamasp Jhabvala, Christian Leinenbach, Andreas Burn & Roland E. Logé. (2019) Healing cracks in selective laser melting by 3D laser shock peening. Additive Manufacturing 30, pages 100881.
Crossref
Sundar R, Ganesh P, Ram Kishor Gupta, Ragvendra G, B. K. Pant, Vivekanand Kain, Ranganathan K, Rakesh Kaul & K. S. Bindra. (2019) Laser Shock Peening and its Applications: A Review. Lasers in Manufacturing and Materials Processing 6:4, pages 424-463.
Crossref
Bonny Onuike & Amit Bandyopadhyay. (2019) Additive manufacturing in repair: Influence of processing parameters on properties of Inconel 718. Materials Letters 252, pages 256-259.
Crossref
J.C. Guo, W.J. Chen, R.N. Yang, X.W. Lei, W.J. Yao & N. Wang. (2019) The effect of substrate orientation on stray grain formation in the (111) plane in laser surface remelted single crystal superalloys. Journal of Alloys and Compounds 800, pages 240-246.
Crossref
L. Huarte-Mendicoa, X. Penaranda, A. Lamikiz & S. Moralejo. (2019) Experimental Microstructure Evaluation of Rene 80 in Laser Cladding. Lasers in Manufacturing and Materials Processing 6:3, pages 317-331.
Crossref
Yong-Fang Li, Sung-Tae Hong, Howook Choi & Heung Nam Han. (2019) Solid-state dissimilar joining of stainless steel 316L and Inconel 718 alloys by electrically assisted pressure joining. Materials Characterization 154, pages 161-168.
Crossref
Andrea El Hassanin, Fabio Scherillo, Antonello Astarita & Antonino Squillace. (2019) Cold Spinning of Nimonic 75 Parts: Microstructure Evolution and Heat Treatment. Metallography, Microstructure, and Analysis 8:4, pages 488-494.
Crossref
Yufeng Xia, Li Jin, Qian Cheng, Jiajun Tong, Kemin Zhang & Jingyu Zhang. (2019) A comparative study on the microstructures and mechanical properties between surfacing nickel-based superalloy and surfacing cobalt-based superalloy. Materials Research Express 6:9, pages 096589.
Crossref
Antonio Gloria, Roberto Montanari, Maria Richetta & Alessandra Varone. (2019) Alloys for Aeronautic Applications: State of the Art and Perspectives. Metals 9:6, pages 662.
Crossref
Zhenglong Lei, Nannan Lu & Xingfu Yu. (2019) Epitaxy and new stray grain formation mechanism during epitaxial laser melting deposition of Inconel 718 on directionally solidified nickel-based superalloys. Journal of Manufacturing Processes 42, pages 11-19.
Crossref
Ravindra I. Badiger, S. Narendranath, M. S. Srinath & Ajit M. Hebbale. (2019) Effect of Power Input on Metallurgical and Mechanical Characteristics of Inconel-625 Welded Joints Processed Through Microwave Hybrid Heating. Transactions of the Indian Institute of Metals 72:3, pages 811-824.
Crossref
R. Cortés, N.K. Rodríguez, R.R. Ambriz, V.H. López, A. Ruiz & D. Jaramillo. (2019) Fatigue and crack growth behavior of Inconel 718–AL6XN dissimilar welds. Materials Science and Engineering: A 745, pages 20-30.
Crossref
Ravindra I. Badiger, S. Narendranath & M. S. Srinath. (2018) Optimization of Process Parameters by Taguchi Grey Relational Analysis in Joining Inconel-625 Through Microwave Hybrid Heating. Metallography, Microstructure, and Analysis 8:1, pages 92-108.
Crossref
Wei-Qing Huang, Xiao-Guang Yang & Shao-Lin Li. (2018) Evaluation of service-induced microstructural damage for directionally solidified turbine blade of aircraft engine. Rare Metals 38:2, pages 157-164.
Crossref
Christopher Kantzos, Joseph Pauza, Ross Cunningham, Sneha P. Narra, Jack Beuth & Anthony Rollett. (2018) An Investigation of Process Parameter Modifications on Additively Manufactured Inconel 718 Parts. Journal of Materials Engineering and Performance 28:2, pages 620-626.
Crossref
Ajit Kumar Sahu & Swarup Bag. 2019. Advances in Computational Methods in Manufacturing. Advances in Computational Methods in Manufacturing 231 243 .
Hans Jürgen Maier, Thomas Niendorf & Ralf BürgelHans Jürgen Maier, Thomas Niendorf & Ralf Bürgel. 2019. Handbuch Hochtemperatur-Werkstofftechnik. Handbuch Hochtemperatur-Werkstofftechnik 549 563 .
Hossam A. Kishawy & Ali HosseiniHossam A. Kishawy & Ali Hosseini. 2019. Machining Difficult-to-Cut Materials. Machining Difficult-to-Cut Materials 97 137 .
Eskandar Fereiduni & Mohamed Elbestawi. 2019. Additive Manufacturing of Emerging Materials. Additive Manufacturing of Emerging Materials 111 177 .
Giuseppe Barbieri, Francesco Cognini, Vincenzo Bonaiuto, Roberto Montanari, Maria Richetta & Alessandra Varone. (2018) Laser Beam Welding of IN792 DS Superalloy. Materials Science Forum 941, pages 1149-1154.
Crossref
Zhipeng Zhou, Lan Huang, Yijing Shang, Yunping Li, Liang Jiang & Qian Lei. (2018) Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing. Materials & Design 160, pages 1238-1249.
Crossref
Lvbo She, Yanhong Wei, Shaogang Wang, Jilong Ma & Wenmin Ou. (2018) Welding parameter optimization of electron beam welded GH4169 superalloy based on orthogonal experiment and numerical simulation. Materials Research Express 6:2, pages 026567.
Crossref
Jacob Williams, Paul DryburghAdam ClarePrahalada Rao & Ashok Samal. (2018) Defect Detection and Monitoring in Metal Additive Manufactured Parts through Deep Learning of Spatially Resolved Acoustic Spectroscopy Signals. Smart and Sustainable Manufacturing Systems 2:1, pages 20180035.
Crossref
Ke Han, Houqin Wang, Lei Shen & Binggang Zhang. (2018) Analysis of cracks in the electron beam welded joint of K465 nickel-base superalloy. Vacuum 157, pages 21-30.
Crossref
Martin Leary, Maciej Mazur, Hugh Williams, Eric Yang, Ahmad Alghamdi, Bill Lozanovski, Xuezhe Zhang, Darpan Shidid, Lena Farahbod-Sternahl, Gerd Witt, Ingomar Kelbassa, Peter Choong, Ma Qian & Milan Brandt. (2018) Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes. Materials & Design 157, pages 179-199.
Crossref
Zhaoyang Liu & Zi Wang. (2018) Effect of substrate preset temperature on crystal growth and microstructure formation in laser powder deposition of single-crystal superalloy. Journal of Materials Science & Technology 34:11, pages 2116-2124.
Crossref
Curtis Lee Frederick, Alexander Plotkowski, Michael M. Kirka, Michael Haines, Austin Staub, Edwin J. Schwalbach, David Cullen & S. S. Babu. (2018) Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5. Metallurgical and Materials Transactions A 49:10, pages 5080-5096.
Crossref
D. Locq, M. Martin, C. Ramusat, F. Fossard & M. Perrut. (2018) γ′ Precipitation Study of a Co-Ni-Based Alloy. Metallurgical and Materials Transactions A 49:9, pages 3854-3864.
Crossref
Yang Liu, Shujin Liang, Zhiyu Han, Jiaming Song & Qingxiang Wang. (2018) A novel model of calculating particle sizes in plasma rotating electrode process for superalloys. Powder Technology 336, pages 406-414.
Crossref
Fabrizia Caiazzo. (2018) Laser-aided Directed Metal Deposition of Ni-based superalloy powder. Optics & Laser Technology 103, pages 193-198.
Crossref
Kai-Cheng Chen, Tai-Cheng Chen, Ren-Kae Shiue & Leu-Wen Tsay. (2018) Liquation Cracking in the Heat-Affected Zone of IN738 Superalloy Weld. Metals 8:6, pages 387.
Crossref

Displaying 200 of 315 citing articles. Use the download link below to view the full list of citing articles.

Download full citations list

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.