REFERENCES
- ‘Standard welding terms and conditions’, ANSI/AWS A3.0-89, American Welding Society, 1989.
- R. C. Reed, H. J. Stone, D. Dye, S. M. Roberts and S. G. Mckenzie: Proc. Conf. on ‘Superalloys 2000’, (eds T. M. Pollock et al.), 665; 2000, Seven Springs, Champignon, USA.
- O. Hunziker, D. Dye, S. M. Roberts and R. C. Reed: Proc. Conf. on ‘Numerical analysis of weldability’, Graz-Seggau, Austria, 1999.
- D. Dye, O. Hunziker, S. M. Roberts and R. C. Reed: Metall. Trans., 2001, 32A, 1713–1725.
- O. Hunziker and R. C. Reed: Acta Mater., 2000, 48, 4191–4201.
- H. Guo, M. C. Chaturvedi, N. L. Richards and G. S. Mcmahon: Scripta Mater., 1999, 40, (3), 383–388.
- X. Huang, M. C. Chaturvedi and N. L. Richards: Metall. Trans. A, 1996, 27A, 785–790.
- L. Nastac and D. M. Stefanescu: Metall. Trans. A, 1997, 28A, 1582–1587.
- Y. M. Yaman and M. C. Kushan: J. Mater. Sci. Lett., 1998, 17, 1231–1234.
- G. Cam and M. Kocak: Int. Mater. Rev., 1998, 43, (1), 1–44.
- R. E. Pease: Weld. J. Res., 1957, 36, (Suppl.), 330–334.
- Cannon-Muskegon Technical Bulletin, ‘CM939 WeldableTM alloy.’ August 2002.
- A. Dhooge and A. Vinckier: Int. J. Pressure Vessels Piping, 1987, 27, 239–269.
- M. Prager and C. S. Shira: Weld Res. Council Bull., 1968, 128.
- T. Kelly: Proc. Symp. on ‘Weldability of materials’, (eds R. A. Patterson and K. W. Mahn), 151–157; 1990, ASM Int., Detroit, MI, USA.
- M. Gaumann, C. Bezencon, P. Canalis and W. Kurz: Acta Mater., 2001, 49, (6), 1051–1062.
- M. Gaumann, S. Henry, F. Cleton, J. D. Wagniere and W. Kurz: Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 1999, 271, (1–2), 232–241.
- M. J. Russell and P. L. Threadgill: ‘Repair of IN939 rotor assembly—initial feasibility studies.’ TWI Report NO: 12603/1/00, 2000.