Vahid Feizollahi & Ali Heidary Moghadam. (2023) Effect of pin geometry, rotational speed, and dwell time of tool in dissimilar joints of low-carbon galvanized steel and aluminum 6061-T6 by friction stir spot welding. Results in Materials, pages 100483.
Crossref
Taotao Li, Xiaolong Xie, Jingfeng Xu, Ruifeng Li, Kai Qi, Xiaoqiang Zhang, Hangyu Yue, Yue Zhao & Lei Qiao. (2023) Research on AZ31 Mg alloy/22MnB5 steel pinless friction stir spot welding process and interfacial temperature field simulation. Journal of Materials Research and Technology 26, pages 3710-3725.
Crossref
Sukanta Das & R. Ganesh Narayanan. (2023) Friction stir spot welding of aluminum and steel sheets using a consumable sheet. The International Journal of Advanced Manufacturing Technology 128:1-2, pages 221-241.
Crossref
I.T. Abdullah, M.K. Mejbel & B.M.A. Al-bhadle. (2023) Double Stage Friction Stir Spot Extrusion Welding: a Novel Manufacturing Technique for Joining Sheets. Experimental Techniques.
Crossref
Luke Walker, Carolin Fink, Colleen Hilla, Ying Lu & Wei Zhang. (2023) Peculiar roles of nickel diffusion in intermetallic compound formation at the dissimilar metal interface of magnesium to steel spot welds. Materials & Design 230, pages 111980.
Crossref
Hassanein I. Khalaf, Raheem Al-Sabur & Hamed Aghajani Derazkola. (2023) Effect of number of tool shoulders on the quality of steel to magnesium alloy dissimilar friction stir welds. Archives of Civil and Mechanical Engineering 23:2.
Crossref
Syed Hasan Raza, Tobias Mittnacht, George Diyoke, Daniel Schneider, Britta Nestler & Benjamin Klusemann. (2022) Modeling of temperature- and strain-driven intermetallic compound evolution in an Al–Mg system via a multiphase-field approach with application to refill friction stir spot welding. Journal of the Mechanics and Physics of Solids 169, pages 105059.
Crossref
E.L. Nitu, M. Diakhaté, C. Bădulescu, M. Grédiac, B. Blaysat, D.M. Iordache, A. Bosneag, J. Adrien, E. Maire, M. Dhondt & Y. Demmouche. (2022) Analyzing defects and their effects on the strength of a three-layer FSW joint by using X-ray microtomography, localized spectrum analysis, and acoustic emission. Materials Characterization 190, pages 112069.
Crossref
Shamsu Tukur Auwal, Murtala Sule Dambatta, Singh Ramesh & Tan Caiwang. 2022. Engineering Principles - Welding and Residual Stresses. Engineering Principles - Welding and Residual Stresses.
Mingrun Yu, Hongyun Zhao, Zili Zhang, Li Zhou & Xiaoguo Song. (2022) Friction surfacing assisted refilled friction stir spot welding of AA6061 alloy and Q235 steel. Journal of Manufacturing Processes 77, pages 1-12.
Crossref
Yoshihiko Uematsu, Toshifumi Kakiuchi, Kenta Niimi & Paul Dario Toasa Caiza. (2022) Local strain analysis under quasi-static tensile loading in Al/steel dissimilar friction stir weld by a digital image correlation method. The International Journal of Advanced Manufacturing Technology 120:1-2, pages 349-360.
Crossref
Alexander Khaimovich, Yaroslav Erisov & Igor Shishkovsky. (2022) Thermodynamic Conditions for Consolidation of Dissimilar Materials in Bimetal and Functional Graded Structures. Materials 15:3, pages 825.
Crossref
Shuang Zhao, Gang Song, Jian Chen, Man Yao & Liming Liu. (2022) Adsorption behavior and mechanism of multiple Mg atoms on the surface of AlNi compound at Mg alloy/steel interface. Current Applied Physics 33, pages 51-58.
Crossref
Yongxian Huang, Xiangchen Meng, Dongxin Mao & Long Wan. 2022. Joining Processes for Dissimilar and Advanced Materials. Joining Processes for Dissimilar and Advanced Materials
283
348
.
Alexander Khaimovich, Yaroslav Erisov, Anton Agapovichev, Igor Shishkovsky, Vitaliy Smelov & Vasilii Razzhivin. (2021) Practical Approbation of Thermodynamic Criteria for the Consolidation of Bimetallic and Functionally Gradient Materials. Metals 11:12, pages 1960.
Crossref
Banglong Fu, Junjun Shen, Uceu F.H.R. Suhuddin, Ayrton A.C. Pereira, Emad Maawad, Jorge F. dos Santos, Benjamin Klusemann & Michael Rethmeier. (2021) Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel. Materials & Design 209, pages 109997.
Crossref
Marcin Winnicki. (2021) Advanced Functional Metal-Ceramic and Ceramic Coatings Deposited by Low-Pressure Cold Spraying: A Review. Coatings 11:9, pages 1044.
Crossref
Michael Becker & Frank Balle. (2021) Multi-Spot Ultrasonic Welding of Aluminum to Steel Sheets: Process and Fracture Analysis. Metals 11:5, pages 779.
Crossref
Tianhao Wang, Piyush Upadhyay & Scott Whalen. (2020) A Review of Technologies for Welding Magnesium Alloys to Steels. International Journal of Precision Engineering and Manufacturing-Green Technology 8:3, pages 1027-1042.
Crossref
Fangzhou Yang & Bing Liu. (2021) Microstructure Evolution and Strengthening Mechanism of Galvanized Steel/Mg Alloy Joint Obtained by Ultrasonic Vibration-Assisted Welding Process. Materials 14:7, pages 1674.
Crossref
Gang Song, Shuang Zhao, M. Shehryar Khan, Jian Chen & Man Yao. (2021) Microscale bonding mechanism of Mg alloy and steel welded joint with nanoscale Al-based intermetallic compound interface layers. Materials Today Communications 26, pages 101924.
Crossref
Ya-peng Zhao, Lian-feng Chen, Shi-jie Zhu, Yu-feng Sun & Shao-kang Guan. (2020) Clarifying effect of welding conditions on microstructure and mechanical properties of friction stir spot-welded DH590 automotive high-strength steel plates. Journal of Iron and Steel Research International 28:2, pages 232-243.
Crossref
Alexander Khaimovich, Yaroslav Erisov, Vitaliy Smelov, Anton Agapovichev, Ilia Petrov, Vasilii Razhivin, Igor Bobrovskij, Viktoriya Kokareva & Alexander Kuzin. (2021) Interface Quality Indices of Al–10Si–Mg Aluminum Alloy and Cr18–Ni10–Ti Stainless-Steel Bimetal Fabricated via Selective Laser Melting. Metals 11:1, pages 172.
Crossref
R. Supriyanka, V.V. Kondaiah, L.R. Raju, R. Dumpala & B. Ratna Sunil. (2021) Role of plunge depth on the joint formation and mechanical behavior of Al6063‐AZ91 dissimilar lap joint produced by friction stir welding. Materialwissenschaft und Werkstofftechnik 52:1, pages 111-121.
Crossref
Syed Hasan Raza & Benjamin Klusemann. (2020) Multiphase-field modeling of temperature-driven intermetallic compound evolution in an Al–Mg system for application to solid-state joining processes. Modelling and Simulation in Materials Science and Engineering 28:8, pages 085003.
Crossref
Aleksandra Laska & Marek Szkodo. (2020) Manufacturing Parameters, Materials, and Welds Properties of Butt Friction Stir Welded Joints–Overview. Materials 13:21, pages 4940.
Crossref
Virendra Pratap Singh, Surendra Kumar Patel, Alok Ranjan & Basil Kuriachen. (2020) Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: a critical review. Journal of Materials Research and Technology 9:3, pages 6217-6256.
Crossref
R.Z. Xu, Q. Yang, D.R. Ni, B.L. Xiao, C.Z. Liu & Z.Y. Ma. (2020) Influencing mechanism of pre-existing nanoscale Al5Fe2 phase on Mg–Fe interface in friction stir spot welded Al-free ZK60–Q235 joint. Journal of Materials Science & Technology 42, pages 220-228.
Crossref
Raju Prasad Mahto, Ravi Kumar & Surjya Kanta Pal. (2020) Characterizations of weld defects, intermetallic compounds and mechanical properties of friction stir lap welded dissimilar alloys. Materials Characterization 160, pages 110115.
Crossref
Pravat Ranjan Pati, Soumyajit Das, Mantra Prasad Satpathy, Bharat Chandra Routara, Susanta Kumar Sahoo & Subrat Kumar Bhuyan. (2020) Ultrasonic spot welding of Al-Cu sheets: A comprehensive study. Materials Today: Proceedings 33, pages 5168-5173.
Crossref
Mantra Prasad Satpathy, Bharat Chandra Routara & Susanta Kumar Sahoo. 2020. Modern Manufacturing Processes. Modern Manufacturing Processes
43
68
.
Mantra Prasad Satpathy, Bhanupratap Patel & Susanta Kumar Sahoo. (2019) Exploration of bonding phenomenon and microstructural characterization during high-power ultrasonic spot welding of aluminum to steel sheets with copper interlayer. Ain Shams Engineering Journal 10:4, pages 811-819.
Crossref
A. Niroumand‐Jadidi & S.F. Kashani‐Bozorg. (2019) Failure mechanisms of friction stir spot welds of AA6061‐T6/DP590 steel during tensile‐shear testing. Fatigue & Fracture of Engineering Materials & Structures 42:10, pages 2247-2261.
Crossref
Kai Chen, Xun Liu & Jun Ni. (2019) A review of friction stir–based processes for joining dissimilar materials. The International Journal of Advanced Manufacturing Technology 104:5-8, pages 1709-1731.
Crossref
A. Esmaeili, C. Sbarufatti & A. M. S. Hamouda. (2019) Characteristics of Intermetallic Compounds in Dissimilar Friction Stir Welding: A Review. Metallography, Microstructure, and Analysis 8:4, pages 445-461.
Crossref
Dinh-Son Nguyen, Hong-Seok Park & Chang-Myung Lee. (2019) Applying Selective Laser Melting to Join Al and Fe: An Investigation of Dissimilar Materials. Applied Sciences 9:15, pages 3031.
Crossref
Z. Shen, Y. Ding, J. Chen, B. Shalch Amirkhiz, J.Z. Wen, L. Fu & A.P. Gerlich. (2019) Interfacial bonding mechanism in Al/coated steel dissimilar refill friction stir spot welds. Journal of Materials Science & Technology 35:6, pages 1027-1038.
Crossref
Alessio Gullino, Paolo Matteis & Fabio D’Aiuto. (2019) Review of Aluminum-To-Steel Welding Technologies for Car-Body Applications. Metals 9:3, pages 315.
Crossref
Hui Li, Jiansheng Zhang & Xiaoliang Wang. (2019) Microstructure and mechanical properties of TIG welded-brazed AZ61 Mg alloy and mild steel joints with and without interlayer. Materials Research Express 6:6, pages 066503.
Crossref
Wayne Cai, Glenn Daehn, Anupam Vivek, Jingjing Li, Haris Khan, Rajiv S. Mishra & Mageshwari Komarasamy. (2019) A State-of-the-Art Review on Solid-State Metal Joining. Journal of Manufacturing Science and Engineering 141:3.
Crossref
Kush P. Mehta. (2018) A review on friction-based joining of dissimilar aluminum–steel joints. Journal of Materials Research 34:1, pages 78-96.
Crossref
Masato IIMORI, Yoji SHIBUTANI, Hiro TANAKA & Yang LIU. (2019) Shape optimization analysis of adhesive interface under multiaxial stress state using failure function with stress invariants不変量破損則に基づく多軸応力場での接着界面形状最適化. Transactions of the JSME (in Japanese) 85:870, pages 18-00409-18-00409.
Crossref
Bintang Adhi Guna, Nurul Muhayat & Triyono. (2019) Effect of Rotational Speed and Flat Tool Diameter on the Zn Distribution of the Dissimilar Metals Friction Stir Spot Welded between Aluminum Alloy 5083 H321 and Galvanized Steel. MATEC Web of Conferences 269, pages 02004.
Crossref
Gang Song, Taotao Li, Jingwei Yu & Liming Liu. (2018) A Review of Bonding Immiscible Mg/Steel Dissimilar Metals. Materials 11:12, pages 2515.
Crossref
Fei Yan, Xiang Fang, Lin Chen, Chunming Wang, Juan Zhao, Fang Chai & Wei Wang. (2018) Microstructure evolution and phase transition at the interface of steel/Al dissimilar alloys during Nd: YAG laser welding. Optics & Laser Technology 108, pages 193-201.
Crossref
Long Wan & Yongxian Huang. (2018) Friction stir welding of dissimilar aluminum alloys and steels: a review. The International Journal of Advanced Manufacturing Technology 99:5-8, pages 1781-1811.
Crossref
Isam Tareq Abdullah & Sabah Khammass Hussein. (2018) Improving the joint strength of the friction stir spot welding of carbon steel and copper using the design of experiments method. Multidiscipline Modeling in Materials and Structures 14:5, pages 908-922.
Crossref
Jun Zhou & Yong Wang. (2018) Effect of ultrasonic vibration field on tungsten inert gas welding of magnesium alloy and galvanized steel. Materials Research Express 6:1, pages 016519.
Crossref
Sohrab Ghahri Saremi, Seyyed Ehsan Mirsalehi & Ali Shamsipur. (2018) Transient liquid phase bonding of AZ31 magnesium alloy: Metallurgical structure and mechanical properties. Journal of Manufacturing Processes 35, pages 140-148.
Crossref
Peng Li, Yaqiang Wang, Shuai Wang, Jiang Yang, Honggang Dong & Dejun Yan. (2018) Corrosion behavior of refilled friction stir spot welded joint between aluminum alloy and galvanized steel. Materials Research Express 5:9, pages 096524.
Crossref
R.Z. Xu, D.R. Ni, Q. Yang, B.L. Xiao, C.Z. Liu & Z.Y. Ma. (2018) Influencing mechanism of Al-containing Zn coating on interfacial microstructure and mechanical properties of friction stir spot welded Mg–steel joint. Materials Characterization 140, pages 197-206.
Crossref
Amin Niroumand-Jadidi & Seyed Farshid Kashani-Bozorg. (2018) Microstructure and property assessment of dissimilar joints of 6061-T6 Al/dual-phase steel fabricated by friction stir spot welding. Welding in the World 62:4, pages 751-765.
Crossref
Xiaochong Lyu, Meng Li, Xifeng Li & Jun Chen. (2018) Double-sided friction stir spot welding of steel and aluminum alloy sheets. The International Journal of Advanced Manufacturing Technology 96:5-8, pages 2875-2884.
Crossref
B. Lakshmana Prasad, G. Neelaiah, M. Gopi Krishna, S.V.V. Ramana, K. Sai Prakash, G. Sarika, G. Pradeep Kumar Reddy, Ravikumar Dumpala & B. Ratna Sunil. (2018) Joining of AZ91 Mg alloy and Al6063 alloy sheets by friction stir welding. Journal of Magnesium and Alloys 6:1, pages 71-76.
Crossref
M. Haghshenas & A.P. Gerlich. (2018) Joining of automotive sheet materials by friction-based welding methods: A review. Engineering Science and Technology, an International Journal 21:1, pages 130-148.
Crossref
Teresa J. Rinker, Jwo Pan, Michael Santella & Tsung-Yu Pan. (2018) Fatigue behavior of dissimilar ultrasonic welds in lap-shear specimens of AZ31 and steel sheets. Engineering Fracture Mechanics 189, pages 405-426.
Crossref
Gang Song, Hong-yang Wang, Tao-tao Li & Li-ming Liu. (2018) Joining mechanism of Mg alloy/steel butt joints with Cu–Zn interlayer by hybrid laser–TIG welding source. Journal of Iron and Steel Research International 25:2, pages 221-227.
Crossref
Ryoji OHASHI. (2018) Dissimilar Material Joining by FSSW. JOURNAL OF THE JAPAN WELDING SOCIETY 87:1, pages 28-32.
Crossref
Masato IIMORI, Hiro TANAKA, Mayuko KIMURA, Yoji SHIBUTANI & Yang LIU. (2018) Simple evaluation method of adhesive failure criterion in multiaxial stress states by uniaxial tensile tests. Mechanical Engineering Journal 5:1, pages 17-00577-17-00577.
Crossref
Long Wan & Yongxian Huang. (2017) Microstructure and Mechanical Properties of Al/Steel Friction Stir Lap Weld. Metals 7:12, pages 542.
Crossref
Kai Chen, Xun Liu & Jun Ni. (2017) Keyhole refilled friction stir spot welding of aluminum alloy to advanced high strength steel. Journal of Materials Processing Technology 249, pages 452-462.
Crossref
Z. Barlas. (2017) Weldability of CuZn30 Brass/DP600 Steel Couple by Friction Stir Spot Welding. Acta Physica Polonica A 132:3-II, pages 991-993.
Crossref
Teresa J. Rinker & Jwo Pan. (2017) Stress intensity factor solutions for welds in lap-shear specimens of dissimilar sheet materials with and without kinked cracks. Engineering Fracture Mechanics 177, pages 133-152.
Crossref
Wei Yuan, Brian Jordon, Bita Ghaffari, Harish Rao, Shengyi Li & Min Fan. Mechanical Performance of Friction Stir Linear Welds of Al to Mg Alloys. Mechanical Performance of Friction Stir Linear Welds of Al to Mg Alloys.
Ming-Jer Hsieh, Rong-Tsong Lee & Yuang-Cherng Chiou. (2017) Friction stir spot fusion welding of low-carbon steel to aluminum alloy. Journal of Materials Processing Technology 240, pages 118-125.
Crossref
Minjung Kang, Cheolhee Kim & Young-Min Kim. (2017) Joining of AZ31 Magnesium Alloy and Steel Sheet under Four Different Coating Conditions Based on Gas Metal Arc Weld-Brazing. MATERIALS TRANSACTIONS 58:1, pages 95-102.
Crossref
M. Stolbchenko, O. Grydin & M. Schaper. 2017. Light Metals 2017. Light Metals 2017
843
851
.
Bekir Çevik. (2016) Influence of welding parameters on the fracture of PE300 polyethylene friction stir spot welds. Materials Testing 58:11-12, pages 959-962.
Crossref
Z. Shen, Y. Ding, J. Chen & A.P. Gerlich. (2016) Comparison of fatigue behavior in Mg/Mg similar and Mg/steel dissimilar refill friction stir spot welds. International Journal of Fatigue 92, pages 78-86.
Crossref
P. Jedrasiak, H. R. Shercliff, A. Reilly, G. J. McShane, Y. C. Chen, L. Wang, J. Robson & P. Prangnell. (2016) Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding. Journal of Materials Engineering and Performance 25:9, pages 4089-4098.
Crossref
Zafar Iqbal, Nouari Saheb & Abdel Rahman Shuaib. (2016) W-25%Re-HfC composite materials for Pin tool material applications: Synthesis and consolidation. Journal of Alloys and Compounds 674, pages 189-199.
Crossref
Jin Young Yoon, Cheolhee Kim & Sehun Rhee. (2016) Effect of Circumferential Tool Path Control on Friction Stir Spot Welding of Al/Fe Dissimilar Metal Joint. Journal of Welding and Joining 34:3, pages 6-11.
Crossref
YunWu Ma, YongBing Li, Wei Hu, Ming Lou & ZhongQin Lin. (2016) Modeling of Friction Self-Piercing Riveting of Aluminum to Magnesium. Journal of Manufacturing Science and Engineering 138:6.
Crossref
F.A. Mirza, A. Macwan, S.D. Bhole, D.L. Chen & X.-G. Chen. (2016) Effect of welding energy on microstructure and strength of ultrasonic spot welded dissimilar joints of aluminum to steel sheets. Materials Science and Engineering: A 668, pages 73-85.
Crossref
F. A. Mirza, A. Macwan, S. D. Bhole & D. L. Chen. (2016) Microstructure and Fatigue Properties of Ultrasonic Spot Welded Joints of Aluminum 5754 Alloy. JOM 68:5, pages 1465-1475.
Crossref
X.Y. Wang, X.Y. Gu, D.Q. Sun & C.Y. Xi. (2016) Interface characteristics and mechanical behavior of metal inert-gas arc welded Mg–steel joints. Journal of Materials Research 31:5, pages 589-598.
Crossref
Fatma Lehyani & Alaeddine Zouari. (2015) Evaluating and measuring knowledge management's impact on supply chain performance using HOQ. Evaluating and measuring knowledge management's impact on supply chain performance using HOQ.
William T. Evans, Brian T. Gibson, Jay T. Reynolds, Alvin M. Strauss & George E. Cook. (2015) Friction Stir Extrusion: A new process for joining dissimilar materials. Manufacturing Letters 5, pages 25-28.
Crossref
Z. Shen, Y. Chen, M. Haghshenas & A.P. Gerlich. (2015) Role of welding parameters on interfacial bonding in dissimilar steel/aluminum friction stir welds. Engineering Science and Technology, an International Journal 18:2, pages 270-277.
Crossref
Wei-Jen Lai & Jwo Pan. (2015) Failure mode and fatigue behavior of weld-bonded lap-shear specimens of magnesium and steel sheets. International Journal of Fatigue 75, pages 184-197.
Crossref
D. Klobčar, J. Tušek, A. Smolej & S. Simončič. (2014) Parametric study of FSSW of aluminium alloy 5754 using a pinless tool. Welding in the World 59:2, pages 269-281.
Crossref
W. Yuan, K. Shah, B. Ghaffari & H. Badarinarayan. 2015. Friction Stir Welding and Processing VIII. Friction Stir Welding and Processing VIII
125
135
.
Nilesh Kumar, Wei Yuan & Rajiv S. Mishra. 2015. Friction Stir Welding of Dissimilar Alloys and Materials. Friction Stir Welding of Dissimilar Alloys and Materials
71
114
.
Nilesh Kumar, Wei Yuan & Rajiv S. Mishra. 2015. Friction Stir Welding of Dissimilar Alloys and Materials. Friction Stir Welding of Dissimilar Alloys and Materials
35
42
.
W. Yuan, K. Shah, B. Ghaffari & H. Badarinarayan. 2016. Friction Stir Welding and Processing VIII. Friction Stir Welding and Processing VIII
127
135
.
Daxin Ren & Liming Liu. (2014) Interface microstructure and mechanical properties of arc spot welding Mg–steel dissimilar joint with Cu interlayer. Materials & Design 59, pages 369-376.
Crossref
Arshad Noor Siddiquee & Sunil Pandey. (2014) Experimental investigation on deformation and wear of WC tool during friction stir welding (FSW) of stainless steel. The International Journal of Advanced Manufacturing Technology 73:1-4, pages 479-486.
Crossref
G. Pardal, S. Meco, S. Ganguly, S. Williams & P. Prangnell. (2014) Dissimilar metal laser spot joining of steel to aluminium in conduction mode. The International Journal of Advanced Manufacturing Technology 73:1-4, pages 365-373.
Crossref
Güven İpekoğlu & Gürel Çam. (2014) Effects of Initial Temper Condition and Postweld Heat Treatment on the Properties of Dissimilar Friction-Stir-Welded Joints between AA7075 and AA6061 Aluminum Alloys. Metallurgical and Materials Transactions A 45:7, pages 3074-3087.
Crossref
Junjun Shen, Uceu F. H. Suhuddin, Maria E. B. Cardillo & Jorge F. dos Santos. (2014) Eutectic structures in friction spot welding joint of aluminum alloy to copper. Applied Physics Letters 104:19.
Crossref
M. Haghshenas, A. Abdel-Gwad, A.M. Omran, B. Gökçe, S. Sahraeinejad & A.P. Gerlich. (2014) Friction stir weld assisted diffusion bonding of 5754 aluminum alloy to coated high strength steels. Materials & Design 55, pages 442-449.
Crossref
Kaoru OHISHI, Masaru SAKAMURA, Kohei OTA & Hidetoshi FUJII. (2014) Novel Dissimilar Spot Welding of Aluminum Alloy and Steel Sheets by Friction Stirring. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 32:1, pages 1-7.
Crossref
Yoshihiko UEMATSU, Toshifumi KAKIUCHI, Yasunari TOZAKI & Takeshi ASAJI. (2014) Fatigue behavior in A6061/AZ31 dissimilar friction stir spot weld made by a scroll grooved tool. Transactions of the JSME (in Japanese) 80:820, pages SMM0352-SMM0352.
Crossref
B.T. Gibson, D.H. Lammlein, T.J. Prater, W.R. Longhurst, C.D. Cox, M.C. Ballun, K.J. Dharmaraj, G.E. Cook & A.M. Strauss. (2014) Friction stir welding: Process, automation, and control. Journal of Manufacturing Processes 16:1, pages 56-73.
Crossref
Edwar Andrés Torres López & Antonio J. Ramirez. (2013) Efeito dos parâmetros de processo na obtenção e na microestrutura de juntas alumínio-aço realizadas mediante soldagem por atrito com pino não consumível (SAPNC). Soldagem & Inspeção 18:3, pages 245-256.
Crossref
M. Esmaily, S. Nooshin Mortazavi, P. Todehfalah & M. Rashidi. (2013) Microstructural characterization and formation of α′ martensite phase in Ti–6Al–4V alloy butt joints produced by friction stir and gas tungsten arc welding processes. Materials & Design 47, pages 143-150.
Crossref
Y.F. Sun, H. Fujii, N. Takaki & Y. Okitsu. (2013) Microstructure and mechanical properties of dissimilar Al alloy/steel joints prepared by a flat spot friction stir welding technique. Materials & Design 47, pages 350-357.
Crossref
L. Liu, L. Xiao, D.L. Chen, J.C. Feng, S. Kim & Y. Zhou. (2013) Microstructure and fatigue properties of Mg-to-steel dissimilar resistance spot welds. Materials & Design 45, pages 336-342.
Crossref
M.R. Sonne, C.C. Tutum, J.H. Hattel, A. Simar & B. de Meester. (2013) The effect of hardening laws and thermal softening on modeling residual stresses in FSW of aluminum alloy 2024-T3. Journal of Materials Processing Technology 213:3, pages 477-486.
Crossref
Wei-Jen Lai, Jwo Pan, Zhili Feng, Michael Santella & Tsung-Yu Pan. (2013) Failure Mode and Fatigue Behavior of Ultrasonic Spot Welds with Adhesive in Lap-Shear Specimens of Magnesium and Steel Sheets. SAE International Journal of Materials and Manufacturing 6:2, pages 279-285.
Crossref
Y. Uematsu, T. Kakiuchi & Y. Tozaki. 2013. Proceedings of the 1st International Joint Symposium on Joining and Welding. Proceedings of the 1st International Joint Symposium on Joining and Welding
213
218
.
M. Sakamura, K. Ohishi, K. Ota & H. Fujii. 2013. Proceedings of the 1st International Joint Symposium on Joining and Welding. Proceedings of the 1st International Joint Symposium on Joining and Welding
195
199
.
Ying‐Chun Chen & Phil Prangnell. 2012. ICAA13: 13th International Conference on Aluminum Alloys. ICAA13: 13th International Conference on Aluminum Alloys
777
782
.
Y.C. Chen, A. Gholinia & P.B. Prangnell. (2012) Interface structure and bonding in abrasion circle friction stir spot welding: A novel approach for rapid welding aluminium alloy to steel automotive sheet. Materials Chemistry and Physics 134:1, pages 459-463.
Crossref
M. Gao, Z. M. Wang, X. Y. Li & X. Y. Zeng. (2011) Laser Keyhole Welding of Dissimilar Ti-6Al-4V Titanium Alloy to AZ31B Magnesium Alloy. Metallurgical and Materials Transactions A 43:1, pages 163-172.
Crossref
Teresa J. Franklin, Jwo Pan, Michael Santella & Tsung-Yu Pan. (2011) Fatigue Behavior of Dissimilar Ultrasonic Spot Welds in Lap-Shear Specimens of Magnesium and Steel Sheets. SAE International Journal of Materials and Manufacturing 4:1, pages 581-588.
Crossref
A.A.M. da Silva, E. Aldanondo, P. Alvarez, A. Echeverria & M. Eiersebner. 2011. Friction Stir Welding and Processing VI. Friction Stir Welding and Processing VI
389
399
.
. 2011. Welding Fundamentals and Processes. Welding Fundamentals and Processes
664
677
.
Toshio Araki, Masaki Koba, Shoichi Nambu, Junya Inoue & Toshihiko Koseki. (2011) Reactive Transient Liquid Phase Bonding between AZ31 Magnesium Alloy and Low Carbon Steel. MATERIALS TRANSACTIONS 52:3, pages 568-571.
Crossref
Syed Hasan Raza, Tobias Mittnacht, George Diyoke, Daniel Schneider, Britta Nestler & Benjamin Klusemann. (2022) Modeling of Temperature- and Strain-Driven Intermetallic Compound Evolution in an Al-Mg System Via a Multiphase-Field Approach with Application to Refill Friction Stir Spot Welding. SSRN Electronic Journal.
Crossref