1,020
Views
51
CrossRef citations to date
0
Altmetric
Original Article

Indentation testing and its acoustic emission response: applications and emerging trends

, &
Pages 98-142 | Published online: 12 Nov 2013

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (1)

N. H. Faisal, R. Ahmed, Y. Q. Fu, Y. O. Elakwah & M. Alhoshan. (2012) Influence of indenter shape on DLC film failure during multiple load cycle nanoindentation. Materials Science and Technology 28:9-10, pages 1186-1197.
Read now

Articles from other publishers (50)

F. Tremmel, O. Nagler, C. Kutter & R. Holmer. (2023) Smart Cantilever Probe with Integrated Force and Acoustic Emission Sensor. Smart Cantilever Probe with Integrated Force and Acoustic Emission Sensor.
Omar Ali, Rehan Ahmed, Filofteia-Laura Toma, Lutz-Michael Berger, Björn Matthey, Nadimul Faisal & Khalid Ahmed. (2023) Influence of Feedstock and Thermal Spray Process on the Phase Composition of Alumina Coatings and Their Sliding Wear. Journal of Thermal Spray Technology.
Crossref
K. Yerrapragada, D. Chawla, C. R. Henak & M. Eriten. (2022) Fracture-Induced Acoustic Emissions in Gelatin. Experimental Mechanics 63:3, pages 485-494.
Crossref
Nadimul Haque Faisal, Lindsay Scott, Findlay Booth, Scott Duncan, Abbi McLeod, Mohamad Ghazi Droubi & James Njuguna. (2022) Effect of fillers on compression loading performance of modified re-entrant honeycomb auxetic sandwich structures. The Journal of Strain Analysis for Engineering Design 58:2, pages 98-117.
Crossref
Wei Zhou, Zhi-bo Pan, Jie Wang, Shuai Qiao, Lian-hua Ma, Jia Liu, Xia-ying Ren & Ya-zhao Liang. (2023) Review on acoustic emission source location, damage recognition and lifetime prediction of fiber-reinforced composites. Journal of Materials Science 58:2, pages 583-607.
Crossref
Nadimul Haque Faisal, Anil Prathuru, Rehan Ahmed, Vinooth Rajendran, Mamdud Hossain, Viswanathan Venkatachalapathy, Nirmal Kumar Katiyar, Jing Li, Yuheng Liu, Qiong Cai, Bahman Amini Horri, Dhinesh Thanganadar, Gurpreet Singh Sodhi, Kumar Patchigolla, Carlos Fernandez, Shrikant Joshi, Sivakumar Govindarajan, Victoria Kurushina, Sai Katikaneni & Saurav Goel. (2022) Application of Thermal Spray Coatings in Electrolysers for Hydrogen Production: Advances, Challenges, and Opportunities. ChemNanoMat 8:12.
Crossref
Martin Zawischa, Stefan Makowski, Martin Kuczyk & Volker Weihnacht. (2022) Comparison of fracture properties of different amorphous carbon coatings using the scratch test and indentation failure method. Surface and Coatings Technology 435, pages 128247.
Crossref
Radim Čtvrtlík, Jaroslav Čech, Jan Tomáštík, Lukáš Václavek & Petr Haušild. (2022) Plastic instabilities explored via acoustic emission during spherical nanoindentation. Materials Science and Engineering: A 841, pages 143019.
Crossref
Petra Papež & Matej Praprotnik. (2022) Dissipative Particle Dynamics Simulation of Ultrasound Propagation through Liquid Water. Journal of Chemical Theory and Computation 18:2, pages 1227-1240.
Crossref
Chen Liu, Oliver Nagler, Florian Tremmel, Marianne Unterreitmeier, Jessica J. Frick, Radhika P. Patil, X. Wendy Gu & Debbie G. Senesky. (2022) Cluster-based acoustic emission signal processing and loading rate effects study of nanoindentation on thin film stack structures. Mechanical Systems and Signal Processing 165, pages 108301.
Crossref
Junaid Ahmed, Tonghao Zhang, Didem Ozevin & Matthew Daly. (2021) A multiscale indentation-based technique to correlate acoustic emission with deformation mechanisms in complex alloys. Materials Characterization 182, pages 111575.
Crossref
Yu Yan, Zhensheng Yang, Haoda Li & Chenming Jiang. (2021) A bibliometric analysis of research on acoustic emission for nondestructive testing. IOP Conference Series: Materials Science and Engineering 1167:1, pages 012009.
Crossref
Antanas Daugela, Clifton H. Chang & David W. Peterson. (2021) Deep learning based characterization of nanoindentation induced acoustic events. Materials Science and Engineering: A 800, pages 140273.
Crossref
Nadimul Faisal, Ömer Necati Cora, Muhammed Latif Bekci, Romana Ewa Śliwa, Yehuda Sternberg, Shashank Pant, Richard Degenhardt & Anil Prathuru. 2021. Structural Health Monitoring Damage Detection Systems for Aerospace. Structural Health Monitoring Damage Detection Systems for Aerospace 15 72 .
Ayman Ellakwa, Raju Raju, Cai Sheng, Ginu Rajan & B. Gangadhara Prusty. (2020) Acoustic emission and finite element study on the influence of cusp angles on zirconia dental crowns. Dental Materials 36:12, pages 1524-1535.
Crossref
Zhaoyang Ma, Ranjith Pathegama Gamage & Chengpeng Zhang. (2020) Application of nanoindentation technology in rocks: a review. Geomechanics and Geophysics for Geo-Energy and Geo-Resources 6:4.
Crossref
A. G. Kadomtsev, E. V. Gol’eva, A. A. Dunaev, M. F. Kirienko, A. B. Sinani, L. V. Tikhonova, A. E. Chmel’ & I. P. Shcherbakov. (2020) Acoustic Emission during Indentation into MgAl2O4 Ceramics. Glass Physics and Chemistry 46:3, pages 267-271.
Crossref
Ben D. Beake, Radim Ctvrtlik, Adrian J. Harris, Alberto Sanchez Martin, Lukas Vaclavek, Jan Manak & Vaclav Ranc. (2020) High frequency acoustic emission monitoring in nano-impact of alumina and partially stabilised zirconia. Materials Science and Engineering: A 780, pages 139159.
Crossref
Yan-nan Zhang, Wei Zhou & Peng-fei Zhang. (2019) Quasi-static indentation damage and residual compressive failure analysis of carbon fiber composites using acoustic emission and micro-computed tomography. Journal of Composite Materials 54:2, pages 229-242.
Crossref
Anja WeidnerAnja Weidner. 2020. Deformation Processes in TRIP/TWIP Steels. Deformation Processes in TRIP/TWIP Steels 365 384 .
Zige Tian, Xipeng Xu, Feng Jiang, Jing Lu, Qiufa Luo & Jiaming Lin. (2019) Study on nanomechanical properties of 4H-SiC and 6H-SiC by molecular dynamics simulations. Ceramics International 45:17, pages 21998-22006.
Crossref
Radim Ctvrtlik, Jan Tomastik, Lukas Vaclavek, Ben D. Beake, Adrian J. Harris, Alberto Sanchez Martin, Michal Hanak & Petr Abrham. (2019) High-Resolution Acoustic Emission Monitoring in Nanomechanics. JOM 71:10, pages 3358-3367.
Crossref
Wei-Xiang Weng, Jian-liang Cao, Hui-ling Lin & Qiang Li. (2019) Acoustic Emission and Associated Damage Mechanism Analysis in 8YSZ Thermal Barrier Coatings Under Instrumented Indentation. Journal of Thermal Spray Technology 28:7, pages 1651-1663.
Crossref
M. G. Droubi, C. Fosbrooke, J. McConnachie & N. H. Faisal. (2019) Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades. SN Applied Sciences 1:7.
Crossref
Alexey Danyuk, Maxim Afanasiev, Dmitriy Merson & Alexei Vinogradov. (2019) Anisotropy of the acoustic emission signal on scratch testing of a single crystal of aluminum. Letters on Materials 9:1, pages 130-135.
Crossref
X. Qiao, W.X. Weng & Q. Li. (2019) Acoustic emission monitoring and failure behavior discrimination of 8YSZ thermal barrier coatings under Vickers indentation testing. Surface and Coatings Technology 358, pages 913-922.
Crossref
Nadimul Haque Faisal, Rehan Ahmed, Saurav Goel & Graham Cross. (2018) Future of nanoindentation in archaeometry. Journal of Materials Research 33:17, pages 2515-2532.
Crossref
A. Vinogradov, A.V. Danyuk, D.L. Merson & I.S. Yasnikov. (2018) Probing elementary dislocation mechanisms of local plastic deformation by the advanced acoustic emission technique. Scripta Materialia 151, pages 53-56.
Crossref
Caicai Li, Xing Qiao, Teng Wang, Weixiang Weng & Qiang Li. (2018) Damage evolution and failure mechanism of thermal barrier coatings under Vickers indentation by using acoustic emission technique. Progress in Natural Science: Materials International 28:1, pages 90-96.
Crossref
Mohamad G. Droubi, Nadimul H. Faisal, Fraser Orr, John A. Steel & Mohamed El-Shaib. (2017) Acoustic emission method for defect detection and identification in carbon steel welded joints. Journal of Constructional Steel Research 134, pages 28-37.
Crossref
N. H. Faisal, Anil K. Prathuru, Saurav Goel, R. Ahmed, M. G. Droubi, B. D. Beake & Y. Q. Fu. (2017) Cyclic Nanoindentation and Nano-Impact Fatigue Mechanisms of Functionally Graded TiN/TiNi Film. Shape Memory and Superelasticity 3:2, pages 149-167.
Crossref
V. Perfilyev, A. Moshkovich, I. Lapsker & L. Rapoport. (2017) Deformation and Fracture of Copper and Silicon During Indentation Acoustic Emission Measurements. Tribology Letters 65:2.
Crossref
O. Ali, R. Ahmed, N. H. Faisal, Nayef M. Alanazi, L.-M. Berger, A. Kaiser, F.-L. Toma, E. K. Polychroniadis, M. Sall, Y. O. Elakwah & M. F. A. Goosen. (2017) Influence of Post-treatment on the Microstructural and Tribomechanical Properties of Suspension Thermally Sprayed WC–12 wt%Co Nanocomposite Coatings. Tribology Letters 65:2.
Crossref
Claude André DegueldreClaude André Degueldre. 2017. The Analysis of Nuclear Materials and Their Environments. The Analysis of Nuclear Materials and Their Environments 35 256 .
Salvatore Russo, Behzad Ghadimi, Krishna Lawania & Michele Rosano. (2016) Failure analysis using acoustic and energy emission assessment of fibre reinforced polymer material performance under severe conditions. Journal of Reinforced Plastics and Composites 35:13, pages 1075-1090.
Crossref
Ya-nan Song, Bin-shi Xu, Hai-dou Wang, Ming Liu & Zhong-yu Piao. (2016) Effect of indentation conditions on the cracking behavior of a FeCrBSi coating. Materials Testing 58:5, pages 401-407.
Crossref
Jinju Chen. 2015. Thin Films and Coatings. Thin Films and Coatings 123 178 .
Yihui Feng & Taihua Zhang. (2015) Determination of fracture toughness of brittle materials by indentation. Acta Mechanica Solida Sinica 28:3, pages 221-234.
Crossref
E. Martinez-Gonzalez, G. Ramirez, J. Romeu & D. Casellas. (2014) Damage Induced by a Spherical Indentation Test in Tool Steels Detected by Using Acoustic Emission Technique. Experimental Mechanics 55:2, pages 449-458.
Crossref
R. Ahmed, O. Ali, N.H. Faisal, N.M. Al-Anazi, S. Al-Mutairi, F.-L. Toma, L.-M. Berger, A. Potthoff & M.F.A. Goosen. (2015) Sliding wear investigation of suspension sprayed WC–Co nanocomposite coatings. Wear 322-323, pages 133-150.
Crossref
X. Wang, E.K. Hermann Salje, X. Ding & J. Sun. (2015) Detection of Yield Point Behavior by Acoustic Emission in thin Films. Materials Today: Proceedings 2, pages S535-S539.
Crossref
R. Ahmed, H.L. de Villiers Lovelock, N.H. Faisal & S. Davies. (2014) Structure–property relationships in a CoCrMo alloy at micro and nano-scales. Tribology International 80, pages 98-114.
Crossref
N.H. Faisal, R. Ahmed, A.K. Prathuru, S. Spence, M. Hossain & J.A. Steel. (2014) An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings. Engineering Fracture Mechanics 128, pages 189-204.
Crossref
Saurav Goel, Jiwang Yan, Xichun Luo & Anupam Agrawal. (2014) Incipient plasticity in 4H-SiC during quasistatic nanoindentation. Journal of the Mechanical Behavior of Biomedical Materials 34, pages 330-337.
Crossref
Upadrasta Ramamurty & Jae-il Jang. (2014) Nanoindentation for probing the mechanical behavior of molecular crystals–a review of the technique and how to use it. CrystEngComm 16:1, pages 12-23.
Crossref
R. Ahmed, H.L. de Villiers Lovelock, S. Davies & N.H. Faisal. (2013) Influence of Re-HIPing on the structure–property relationships of cobalt-based alloys. Tribology International 57, pages 8-21.
Crossref
Nadimul H. Faisal, Rehan Ahmed & Richard Fu. (2012) Nano-Impact (Fatigue) Characterization of As-Deposited Amorphous Nitinol Thin Film. Coatings 2:3, pages 195-209.
Crossref
R. Ahmed, Y. Q. Fu & N. H. Faisal. (2012) Fatigue at Nanoscale: An Integrated Stiffness and Depth Sensing Approach to Investigate the Mechanisms of Failure in Diamondlike Carbon Film. Journal of Tribology 134:1.
Crossref
R. Ahmed, N. H. Faisal, A. M. Paradowska & M. E. Fitzpatrick. (2011) Residual Strain and Fracture Response of Al2O3 Coatings Deposited via APS and HVOF Techniques. Journal of Thermal Spray Technology 21:1, pages 23-40.
Crossref
N H Faisal & R Ahmed. (2011) Acoustic emission analysis of Vickers indentation fracture of cermet and ceramic coatings. Measurement Science and Technology 22:12, pages 125704.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.