Citations (133)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (24)
Junyu Tian, Guang Xu, Zhengyi Jiang, Qing Yuan, Guanghui Chen & Haijiang Hu. (2019) Effect of austenisation temperature on bainite transformation below martensite starting temperature. Materials Science and Technology 35:13, pages 1539-1550.
Read now
Read now
Rangasayee Kannan, Yiyu Wang, Rebekah Bannister, Muhammad Rashid & Leijun Li. (2018) Homogenisation of austenite during non-equilibrium heating in hypereutectoid steels. Materials Science and Technology 34:18, pages 2271-2286.
Read now
Read now
Lei Guo, Hans Roelofs, Mirkka Ingrid Lembke & Harshad Kumar Dharamshi Hansraj Bhadeshia. (2017) Modelling of recalescence effect on austenite decomposition. Materials Science and Technology 33:10, pages 1258-1267.
Read now
Read now
A. Kamyabi-Gol, D. Herath & P. F. Mendez. (2017) A comparison of common and new methods to determine martensite start temperature using a dilatometer. Canadian Metallurgical Quarterly 56:1, pages 85-93.
Read now
Read now
P. Chen, G. D. Wang, X. C. Xiong & H. L. Yi. (2016) Abnormal expansion due to pearlite-to-austenite transformation in high aluminium-added steels. Materials Science and Technology 32:16, pages 1678-1682.
Read now
Read now
N. O'Meara, H. Abdolvand, J. A. Francis, S. D. Smith & P. J. Withers. (2016) Quantifying the metallurgical response of a nuclear steel to welding thermal cycles. Materials Science and Technology 32:14, pages 1517-1532.
Read now
Read now
M. Seifert, S. Siebert & W. Theisen. (2016) Development of a powder metallurgical corrosion-resistant bearing steel containing NbC and its transfer to industrial applications. Materials Science and Technology 32:4, pages 313-319.
Read now
Read now
M. Peet. (2015) Prediction of martensite start temperature. Materials Science and Technology 31:11, pages 1370-1375.
Read now
Read now
P. Yan & H. K. D. H. Bhadeshia. (2015) Austenite–ferrite transformation in enhanced niobium, low carbon steel. Materials Science and Technology 31:9, pages 1066-1076.
Read now
Read now
J. A. Siefert, B. M. Leister & J. N. DuPont. (2015) Considerations in development of CCT diagrams for complex ferritic materials. Materials Science and Technology 31:6, pages 651-660.
Read now
Read now
S.M.C. van Bohemen. (2015) Relationship between acoustic emission energy and the kinetics of martensite formation in plain carbon steels. Philosophical Magazine 95:2, pages 210-223.
Read now
Read now
D. Luo, M. J. Peet, S. W. Ooi, P. Yan, Z. Yin & H. K. D. H. Bhadeshia. (2014) Spheroidisation of hypereutectoid state of nanostructured bainitic steel. Materials Science and Technology 30:11, pages 1282-1286.
Read now
Read now
S. M. C. van Bohemen & J. Sietsma. (2014) Kinetics of martensite formation in plain carbon steels: critical assessment of possible influence of austenite grain boundaries and autocatalysis. Materials Science and Technology 30:9, pages 1024-1033.
Read now
Read now
T. Sourmail & V. Smanio. (2014) Response to ‘A second set of comments on “Determination of Ms temperature: methods, meaning and influence of the ‘slow-start’ phenomenon” by T. Sourmail and V. Smanio’. Materials Science and Technology 30:4, pages 511-512.
Read now
Read now
H. K. D. H. Bhadeshia. (2014) Second set of comments on ‘Determination of Ms temperature: methods, meaning and influence of ‘slow start’ phenomenon’ by T. Sourmail and V. Smanio. Materials Science and Technology 30:4, pages 510-510.
Read now
Read now
T. Ramjaun, H. J. Stone, L. Karlsson, J. Kelleher, R. J. Moat, J. R. Kornmeier, K. Dalaei & H. K. D. H. Bhadeshia. (2014) Effect of interpass temperature on residual stresses in multipass welds produced using low transformation temperature filler alloy. Science and Technology of Welding and Joining 19:1, pages 44-51.
Read now
Read now
T Sourmail & V Smanio. (2013) Response to comments on ‘Determination of Ms temperature: methods, meaning and influence of ‘slow start’ phenomenon’ by T. Sourmail and V. Smanio. Materials Science and Technology 29:7, pages 890-892.
Read now
Read now
H K D H Bhadeshia. (2013) Comments on ‘Determination of Ms temperature: methods, meaning and influence of ‘slow start’ phenomenon’ by T. Sourmail and V. Smanio. Materials Science and Technology 29:7, pages 889-889.
Read now
Read now
T Sourmail & V Smanio. (2013) Determination of Ms temperature: methods, meaning and influence of ‘slow start’ phenomenon. Materials Science and Technology 29:7, pages 883-888.
Read now
Read now
J H Pak, H K D H Bhadeshia & L Karlsson. (2012) Mechanism of misorientation development within coalesced martensite. Materials Science and Technology 28:8, pages 918-923.
Read now
Read now
H. L. Yi, K. Y. Lee & H. K. D. H. Bhadeshia. (2011) Stabilisation of ferrite in hot rolled δ-TRIP steel. Materials Science and Technology 27:2, pages 525-529.
Read now
Read now
A. A. Shirzadi, H. K. D. H. Bhadeshia, L. Karlsson & P. J. Withers. (2009) Stainless steel weld metal designed to mitigate residual stresses. Science and Technology of Welding and Joining 14:6, pages 559-565.
Read now
Read now
J. H. Pak, H. K. D. H. Bhadeshia, L. Karlsson & E. Keehan. (2008) Coalesced bainite by isothermal transformation of reheated weld metal. Science and Technology of Welding and Joining 13:7, pages 593-597.
Read now
Read now
H.-S. Yang & H. K. D. H. Bhadeshia. (2008) Designing low carbon, low temperature bainite. Materials Science and Technology 24:3, pages 335-342.
Read now
Read now
Articles from other publishers (109)
Matteo Villa, Flemming B. Grumsen, Frank Niessen, Thomas Dahmen, Lingfei Cao, Michael Reich, Olaf Kessler, Xiaoxu Huang & Marcel A.J. Somers. (2023) Aging 17-4 PH martensitic stainless steel prior to hardening: effects on martensitic transformation, microstructure and properties. Materialia 32, pages 101882.
Crossref
Crossref
Joshua Kumpati, Sk. Md. Hasan, Manon Bonvalet Rolland & Annika Borgenstam. (2023) Deconstructing the Retained Austenite Stability: A Comparative Study of Two-Phase and Bulk Microstructures. Metallurgical and Materials Transactions A.
Crossref
Crossref
Ming-Wei Wu, Shu-Wei Ku, Hung-Wei Yen, Ming-Hsiang Ku, Shih-Hsien Chang, Kai Ni, Zih-Sin Shih, Chuan Tsai, Ta-Wei Hsu, Chien-Lun Li & Chih-Kai Wang. (2023) The synergic effects of heat treatment and building direction on the microstructure and anisotropic mechanical properties of laser powder bed fusion Corrax maraging stainless steel. Materials Science and Engineering: A 887, pages 145744.
Crossref
Crossref
G.M.A.M. El-Fallah. (2023) Dilatometric study of high silicon bainitic steels: Solid-state transformations. Results in Materials 19, pages 100430.
Crossref
Crossref
Muhammad Shehryar Khan, Maryam Soleimani, Abdelbaset R.H. Midawi, Isiaka Aderibigbe, Y. Norman Zhou & Elliot Biro. (2023) A review on heat affected zone softening of dual-phase steels during laser welding. Journal of Manufacturing Processes 102, pages 663-684.
Crossref
Crossref
Joshua Collins, Martina Piemonte, Mark Taylor, Jonathan Fellowes & Ed Pickering. (2023) A Rapid, Open-Source CCT Predictor for Low-Alloy Steels, and Its Application to Compositionally Heterogeneous Material. Metals 13:7, pages 1168.
Crossref
Crossref
Ömer Faruk Murathan, Kadir Kocatepe & Mehmet Erdoğan. (2023) Impact toughness improvement of high boron-chromium steel by different isothermal heat treatment durations. Materials Testing 0:0.
Crossref
Crossref
Jiajun Xu, Yu Huang & Youmin Rong. (2023) Stress evolution mechanisms under different SSPT-related effects during laser welding. International Journal of Mechanical Sciences 241, pages 107975.
Crossref
Crossref
Adam Skowronek, Erick Cordova-Tapia, Pilar Tobajas-Balsera, Carlos Garcia-Mateo, José A. Jiménez, Roumen Petrov & Adam Grajcar. (2022) Bainite plate thickness reduction and microstructure tailoring by double austempering of Al-rich 3Mn steel. Materials Science and Engineering: A 853, pages 143743.
Crossref
Crossref
Sachin Kumar, Santigopal Samanta & Shiv Brat Singh. (2022) An alternative quenching and partitioning (Q&P) process via spheroidization. Materials Characterization 191, pages 112049.
Crossref
Crossref
Anže Bajželj & Jaka Burja. (2022) Influence of Austenitisation Temperature and Time on Martensitic and Isothermal Bainite Phase Transformation of Spring Steel. Metals 12:8, pages 1373.
Crossref
Crossref
Thomas Kohne, Tuerdi Maimaitiyili, Aimo Winkelmann, Emad Maawad, Peter Hedström & Annika Borgenstam. (2022) Early Martensitic Transformation in a 0.74C–1.15Mn–1.08Cr High Carbon Steel. Metallurgical and Materials Transactions A 53:8, pages 3034-3043.
Crossref
Crossref
Adam Skowronek, Adam Grajcar, Aleksandra Kozłowska, Aleksandra Janik, Mateusz Morawiec & Roumen H. Petrov. (2022) Temperature-Dependent Microstructural Evolution of Al-Rich Medium-Mn Steel During Intercritical Annealing. Metallurgical and Materials Transactions A 53:8, pages 3012-3021.
Crossref
Crossref
Chengcheng Liu, Minping Huang, Qiang Ren, Ying Ren & Lifeng Zhang. (2022) Effect of Grain Size and Cooling Rate on the Martensite Start Temperature of Stainless Steel. steel research international 93:8.
Crossref
Crossref
M Taylor, J W Fellowes, P O Hill, M J Rawson, T L Burnett & E J Pickering. (2022) The Effect of Compositional Heterogeneity on the Martensite Start Temperature of a High Strength Steel During Rapid Austenitisation and Cooling. IOP Conference Series: Materials Science and Engineering 1249:1, pages 012061.
Crossref
Crossref
Hongcan Chen, Wei Xu, Qun Luo, Qian Li, Yu Zhang, Jingjing Wang & Kuo-Chih Chou. (2022) Thermodynamic prediction of martensitic transformation temperature in Fe-C-X (X=Ni, Mn, Si, Cr) systems with dilatational coefficient model. Journal of Materials Science & Technology 112, pages 291-300.
Crossref
Crossref
Ayda Shahriari, Mehdi Sanjari, Hadi Pirgazi, Fateh Fazeli, Babak Shalchi Amirkhiz, Leo A. I. Kestens & Mohsen Mohammadi. (2022) Microstructural Evolution in Additively Manufactured Fe-Cr-Ni Maraging Stainless Steel. Metallurgical and Materials Transactions A 53:5, pages 1771-1792.
Crossref
Crossref
Steve Gaudez, Julien Teixeira, Sabine Denis, Guillaume Geandier & Sébastien Y.P. Allain. (2022) Martensite and nanobainite transformations in a low alloyed steel studied by in situ high energy synchrotron diffraction. Materials Characterization 185, pages 111740.
Crossref
Crossref
Ji Hoon Kim, Guiyoung Gu, Min-Hyeok Kwon, Minseo Koo, Eun-Young Kim, Jin-Kyung Kim, Jae Sang Lee & Dong-Woo Suh. (2022) Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite. Acta Materialia 223, pages 117506.
Crossref
Crossref
Michael Harwarth, Adam Brauer, Qiuliang Huang, Mehdi Pourabdoli & Javad Mola. (2021) Influence of Carbon on the Microstructure Evolution and Hardness of Fe–13Cr–xC (x = 0–0.7 wt.%) Stainless Steel. Materials 14:17, pages 5063.
Crossref
Crossref
Javad Mola, Eun Jung Seo & Lawrence Cho. (2021) Correlation between mechanical stability and hardness of austenite in martensite/austenite mixtures. Materials Science and Engineering: A 822, pages 141687.
Crossref
Crossref
N. Schmidtseifer & S. Weber. (2021) Microstructural Changes During Short-Term Heat Treatment of Martensitic Stainless Steel—Simulation and Experimental Verification. Metallurgical and Materials Transactions A 52:7, pages 2885-2895.
Crossref
Crossref
Weicheng Zhong, Ying Yang, Kevin G. Field, Niyanth Sridharan, Kurt Terrani & Lizhen Tan. (2021) Microstructure and mechanical properties of high Mn-containing ferritic-martensitic alloys exposed to cyclical thermal treatment. Materials Science and Engineering: A 813, pages 141143.
Crossref
Crossref
S. Ayenampudi, C. Celada-Casero, Z. Arechabaleta, M. Arribas, A. Arlazarov, J. Sietsma & M. J. Santofimia. (2021) Microstructural Impact of Si and Ni During High Temperature Quenching and Partitioning Process in Medium-Mn Steels. Metallurgical and Materials Transactions A 52:4, pages 1321-1335.
Crossref
Crossref
Alexandra Glover, John G. Speer & Emmanuel De Moor. (2021) Tempering and Austempering of Double Soaked Medium Manganese Steels. Frontiers in Materials 7.
Crossref
Crossref
Alejandro Basso, Adriana Eres-Castellanos, Nicolás Tenaglia, David San-Martin, José Antonio Jimenez & Francisca G. Caballero. (2021) Effect of Microsegregation and Bainitic Reaction Temperature on the Microstructure and Mechanical Properties of a High-Carbon and High-Silicon Cast Steel. Metals 11:2, pages 220.
Crossref
Crossref
Juan Macchi, Steve Gaudez, Guillaume Geandier, Julien Teixeira, Sabine Denis, Frédéric Bonnet & Sébastien Y.P. Allain. (2021) Dislocation densities in a low-carbon steel during martensite transformation determined by in situ high energy X-Ray diffraction. Materials Science and Engineering: A 800, pages 140249.
Crossref
Crossref
Adriana Eres-Castellanos, Javier Hidalgo, Muftah Zorgani, Mohammad Jahazi, Isaac Toda-Caraballo, Francisca G. Caballero & Carlos Garcia-Mateo. (2021) Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach. Materials & Design 197, pages 109217.
Crossref
Crossref
Zeinab Babasafari, Alexey V. Pan, Farshid Pahlevani, Rumana Hossain, Veena Sahajwalla, Madeleine du Toit & Rian Dippenaar. (2020) Effects of austenizing temperature, cooling rate and isothermal temperature on overall phase transformation characteristics in high carbon steel. Journal of Materials Research and Technology 9:6, pages 15286-15297.
Crossref
Crossref
James Damon, Stefan Dietrich & Volker Schulze. (2020) Implications of carbon, nitrogen and porosity on the γ→α′ martensite phase transformation and resulting hardness in PM-steel Astaloy 85Mo. Journal of Materials Research and Technology 9:4, pages 8245-8257.
Crossref
Crossref
G. K. Bansal, L. P. Junior, Chiradeep Ghosh, V. Rajinikanth, S. Tripathy, V. C. Srivastava, A. N. Bhagat & S. Ghosh Chowdhury. (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A 51:7, pages 3410-3424.
Crossref
Crossref
Mirosław Tupaj, Antoni Władysław Orłowicz, Andrzej Trytek, Marek Mróz, Grzegorz Wnuk & Anna Janina Dolata. (2020) The Effect of Cooling Conditions on Martensite Transformation Temperature and Hardness of 15% Cr Chromium Cast Iron. Materials 13:12, pages 2760.
Crossref
Crossref
Gitae Park, Sangho Uhm & Changhee Lee. (2020) Effects of in-situ post-weld heat treatment on the microstructure and mechanical properties of the coarse-grained heat-affected zone in a resistance spot weld in medium Mn TRIP steel. Materials Science and Engineering: A 788, pages 139477.
Crossref
Crossref
Adriana Eres-Castellanos, Francisca G. Caballero & Carlos Garcia-Mateo. (2020) Stress or strain induced martensitic and bainitic transformations during ausforming processes. Acta Materialia 189, pages 60-72.
Crossref
Crossref
Frederic van gen Hassend & Sebastian Weber. (2019) Influence of Chemical Inhomogeneities on Local Phase Stabilities and Material Properties in Cast Martensitic Stainless Steel. steel research international 91:5.
Crossref
Crossref
C. Hüter, X. Yin, T. Vo & S. Braun. (2020) A pragmatic dataset augmentation approach for transformation temperature prediction in steels. Computational Materials Science 176, pages 109488.
Crossref
Crossref
Caleb A. Felker, John G. Speer, Emmanuel De Moor & Kip O. Findley. (2020) Hot Strip Mill Processing Simulations on a Ti-Mo Microalloyed Steel Using Hot Torsion Testing. Metals 10:3, pages 334.
Crossref
Crossref
G.M.A.M. El-Fallah, S.W. Ooi & H.K.D.H. Bhadeshia. (2019) Effect of nickel aluminide on the bainite transformation in a Fe-0.45C–13Ni–3Al–4Co steel, and associated properties. Materials Science and Engineering: A 767, pages 138362.
Crossref
Crossref
D. Kaiser, H. Charlet-Berguerand, S. Dietrich & V. Schulze. (2019) Simulation of the Austenitization of Ferrite-Carbide Microstructures by means of the Cellular-Automaton Method (CA)∗. HTM Journal of Heat Treatment and Materials 74:4, pages 228-237.
Crossref
Crossref
H K D H Bhadeshia. (2019) Length scales and alloys of iron. IOP Conference Series: Materials Science and Engineering 580:1, pages 012002.
Crossref
Crossref
G. Obasi, E. J. Pickering, A. N. Vasileiou, Y. L. Sun, D. Rathod, M. Preuss, J. A. Francis & M. C. Smith. (2019) Measurement and Prediction of Phase Transformation Kinetics in a Nuclear Steel During Rapid Thermal Cycles. Metallurgical and Materials Transactions A 50:4, pages 1715-1731.
Crossref
Crossref
Jorge I. Besoky, Claudio A. Danon & Cinthia P. Ramos. (2019) Retained austenite phase detected by Mössbauer spectroscopy in ASTM A335 P91 steel submitted to continuous cooling cycles. Journal of Materials Research and Technology 8:2, pages 1888-1896.
Crossref
Crossref
G. K. Bansal, M. Pradeep, Chiradeep Ghosh, V. Rajinikanth, V. C. Srivastava, A. N. Bhagat & S. Kundu. (2018) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A 50:2, pages 547-555.
Crossref
Crossref
G.M.A.M.El Fallah & H.K.D.H. Bhadeshia. (2019) Tensile behaviour of thermally-stable nanocrystalline bainitic-steels. Materials Science and Engineering: A 746, pages 145-153.
Crossref
Crossref
S. Fritz, M.A. Pfeiffer & J. Gollnick. (2019) Optimization of austenitization time for press hardening of steels by using Hollomon‐Jaffe parameter. Materialwissenschaft und Werkstofftechnik 50:2, pages 105-114.
Crossref
Crossref
Shashank Ramesh Babu, Dmitry Ivanov & David Porter. (2019) Influence of Microsegregation on the Onset of the Martensitic Transformation. ISIJ International 59:1, pages 169-175.
Crossref
Crossref
Min Chul Jo, Hyungsoo Lee, A. Zargaran, Joo Hyun Ryu, Seok Su Sohn, Nack J. Kim & Sunghak Lee. (2018) Exceptional combination of ultra-high strength and excellent ductility by inevitably generated Mn-segregation in austenitic steel. Materials Science and Engineering: A 737, pages 69-76.
Crossref
Crossref
Hyungsoo Lee, Min Chul Jo, Seok Su Sohn, A. Zargaran, Joo Hyun Ryu, Nack J. Kim & Sunghak Lee. (2018) Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism. Acta Materialia 147, pages 247-260.
Crossref
Crossref
X. H. Li, P. Saal, W. M. Gan, M. Hoelzel, W. Volk, W. Petry & M. Hofmann. (2017) Strain-Induced Martensitic Transformation Kinetic in Austempered Ductile Iron (ADI). Metallurgical and Materials Transactions A 49:1, pages 94-104.
Crossref
Crossref
Javad Mola, Guoqing Luan, David Brochnow, Olena Volkova & Jun Wu. (2017) Tempering of Martensite and Subsequent Redistribution of Cr, Mn, Ni, Mo, and Si Between Cementite and Martensite Studied by Magnetic Measurements. Metallurgical and Materials Transactions A 48:12, pages 5805-5812.
Crossref
Crossref
Mehrdad Kashefi & Saeed Kahrobaee. (2017) Determination of martensite start temperature using an electromagnetic nondestructive technology. Journal of Alloys and Compounds 720, pages 478-482.
Crossref
Crossref
H. Kong, Q. Chao, M.H. Cai, E.J. Pavlina, B. Rolfe, P.D. Hodgson & H. Beladi. (2017) One-step quenching and partitioning treatment of a commercial low silicon boron steel. Materials Science and Engineering: A.
Crossref
Crossref
Jinbo Gu, Jingyuan Li & Yulai Chen. (2017) Microstructure and Strengthening-Toughening Mechanism of Nitrogen-Alloyed 4Cr5Mo2V Hot-Working Die Steel. Metals 7:8, pages 310.
Crossref
Crossref
B. Kim, J. Sietsma & M.J. Santofimia. (2017) The role of silicon in carbon partitioning processes in martensite/austenite microstructures. Materials & Design 127, pages 336-345.
Crossref
Crossref
Hong-liang Fan, Ai-min Zhao, Qing-chun Li, Hui Guo & Jian-guo He. (2017) Effects of ausforming strain on bainite transformation in nanostructured bainite steel. International Journal of Minerals, Metallurgy, and Materials 24:3, pages 264-270.
Crossref
Crossref
Mathew J. PeetHala S. Hasan, Marie-Noëlle Avettand-Fènoël, Saud H. A. Raubye & Harshad K. D. H. Bhadeshia. (2017) Low-temperature transformation to bainite in a medium-carbon steel. International Journal of Materials Research 108:2, pages 89-98.
Crossref
Crossref
Harshad Bhadeshia & Robert Honeycombe. 2017. Steels: Microstructure and Properties. Steels: Microstructure and Properties
135
177
.
A. Nitsche & P. Mayr. (2016) Round Robin test on measurement of phase transformation temperatures in 9Cr1Mo steel. Welding in the World 61:1, pages 81-90.
Crossref
Crossref
Merlin Seifert & Werner Theisen. (2016) Modeling Hardenable Stainless Steels Using Calculated Martensite Start Temperatures in Thermodynamic Equilibrium Calculations. Metallurgical and Materials Transactions A 47:12, pages 5953-5959.
Crossref
Crossref
Javier Hidalgo & Maria Jesus Santofimia. (2016) Effect of Prior Austenite Grain Size Refinement by Thermal Cycling on the Microstructural Features of As-Quenched Lath Martensite. Metallurgical and Materials Transactions A 47:11, pages 5288-5301.
Crossref
Crossref
Qiuliang Huang, Christina Schröder, Horst Biermann, Olena Volkova & Javad Mola. (2016) Influence of Martensite Fraction on Tensile Properties of Quenched and Partitioned (Q&P) Martensitic Stainless Steels. steel research international 87:8, pages 1082-1094.
Crossref
Crossref
Qiuliang Huang, Bruno C. De Cooman, Horst Biermann & Javad Mola. (2016) Influence of Martensite Fraction on the Stabilization of Austenite in Austenitic–Martensitic Stainless Steels. Metallurgical and Materials Transactions A 47:5, pages 1947-1959.
Crossref
Crossref
Ya. E. Shakhova, A. N. Belyakov & R. O. Kaibyshev. (2016) Mechanical characteristics and microstructure of weld joint of high-temperature martensitic steel containing 9% Cr. The Physics of Metals and Metallography 117:4, pages 378-389.
Crossref
Crossref
I. Fedorova, A. Kostka, E. Tkachev, A. Belyakov & R. Kaibyshev. (2016) Tempering behavior of a low nitrogen boron-added 9%Cr steel. Materials Science and Engineering: A 662, pages 443-455.
Crossref
Crossref
A. Kamyabi-Gol, S.J. Clark, J.W. Gibbs, S. Sridhar & P.F. Mendez. (2016) Quantification of evolution of multiple simultaneous phase transformations using dilation curve analysis (DCA). Acta Materialia 102, pages 231-240.
Crossref
Crossref
Ersoy Eri?ir & O?uz G?rkan Bilir. (2015) Effect of Intercritical Annealing Temperature on Martensite and Bainite Start Temperatures After Partial Austenitization. JOM 68:1, pages 203-209.
Crossref
Crossref
Jianguo He, Aimin Zhao, Chao Zhi & Hongliang Fan. (2015) Acceleration of nanobainite transformation by multi-step ausforming process. Scripta Materialia 107, pages 71-74.
Crossref
Crossref
M. Wendler, M. Hauser, O. Fabrichnaya, L. Krüger, A. Weiß & J. Mola. (2015) Thermal and deformation-induced phase transformation behavior of Fe–15Cr–3Mn–3Ni–0.1N–(0.05–0.25)C austenitic and austenitic–martensitic cast stainless steels. Materials Science and Engineering: A 645, pages 28-39.
Crossref
Crossref
Seok-Jae Lee & Kester D. Clarke. (2015) A Quantitative Investigation of Cementite Dissolution Kinetics for Continuous Heating of Hypereutectoid Steel. Metallurgical and Materials Transactions A 46:9, pages 3917-3923.
Crossref
Crossref
Hadi Ghasemi Nanesa, Mohammad Jahazi & Reza Naraghi. (2015) Martensitic transformation in AISI D2 tool steel during continuous cooling to 173 K. Journal of Materials Science 50:17, pages 5758-5768.
Crossref
Crossref
Qihang Han, Yulong Zhang & Li Wang. (2015) Effect of Annealing Time on Microstructural Evolution and Deformation Characteristics in 10Mn1.5Al TRIP Steel. Metallurgical and Materials Transactions A 46:5, pages 1917-1926.
Crossref
Crossref
Ersoy Erişir & Oˇguz Gürkan Bilir. 2015. TMS2015 Supplemental Proceedings. TMS2015 Supplemental Proceedings
1425
1432
.
Bikas C. Maji, Madangopal Krishnan, Amit Verma, R. Basu, I. Samajdar & Ranjit K. Ray. (2014) Effect of Pre-straining on the Shape Recovery of Fe-Mn-Si-Cr-Ni Shape Memory Alloys. Metallurgical and Materials Transactions A 46:2, pages 639-655.
Crossref
Crossref
Ersoy Erişir & Oğuz Gürkan Bilir. 2016. TMS 2015 144th Annual Meeting & Exhibition. TMS 2015 144th Annual Meeting & Exhibition
1425
1432
.
Hector Pous-Romero & Harry K. D. H. Bhadeshia. (2014) Continuous Cooling Transformations in Nuclear Pressure Vessel Steels. Metallurgical and Materials Transactions A 45:11, pages 4897-4906.
Crossref
Crossref
Van Tuan Duong, You Young Song, Kyong-Su Park, H. K. D. H. Bhadeshia & Dong-Woo Suh. (2014) Austenite in Transformation-Induced Plasticity Steel Subjected to Multiple Isothermal Heat Treatments. Metallurgical and Materials Transactions A 45:10, pages 4201-4209.
Crossref
Crossref
E. J. Pickering & H. K. D. H. Bhadeshia. (2014) The Consequences of Macroscopic Segregation on the Transformation Behavior of a Pressure-Vessel Steel. Journal of Pressure Vessel Technology 136:3.
Crossref
Crossref
Hector Pous-Romero & Harry Bhadeshia. (2014) Coalesced Martensite in Pressure Vessel Steels. Journal of Pressure Vessel Technology 136:3.
Crossref
Crossref
E. J. Pickering & H. K. D. H. Bhadeshia. (2014) Macrosegregation and Microstructural Evolution in a Pressure-Vessel Steel. Metallurgical and Materials Transactions A 45:7, pages 2983-2997.
Crossref
Crossref
Baoqun Ning, Xiaosheng Zhou, Qingzhi Shi, Yongchang Liu, Jie Zhao & Zheping Zhang. (2014) Relationship between austenite stability and martensite formation in modified 9Cr-1Mo steel. International Journal of Materials Research 105:3, pages 232-239.
Crossref
Crossref
Ersoy Eri?ir & O?uz G?rkan Bilir. (2013) Effect of Intercritical Annealing Temperature on Phase Transformations in Medium Carbon Dual Phase Steels. Journal of Materials Engineering and Performance 23:3, pages 1055-1061.
Crossref
Crossref
Pei Yan & H. K. D. H. Bhadeshia. (2013) Mechanism and Kinetics of Solid-State Transformation in High-Temperature Processed Linepipe Steel. Metallurgical and Materials Transactions A 44:12, pages 5468-5477.
Crossref
Crossref
T. Sourmail & V. Smanio. (2013) Optimisation of the mechanical properties of air cooled bainitic steel components through tailoring of the transformation kinetics. Materials Science and Engineering: A 582, pages 257-261.
Crossref
Crossref
F. Christien, M.T.F. Telling & K.S. Knight. (2013) A comparison of dilatometry and in-situ neutron diffraction in tracking bulk phase transformations in a martensitic stainless steel. Materials Characterization 82, pages 50-57.
Crossref
Crossref
Seok-Jae Lee, Seawoong Lee & Bruno C. De Cooman. (2013) Martensite transformation of sub-micron retained austenite in ultra-fine grained manganese transformation-induced plasticity steel. International Journal of Materials Research 104:5, pages 423-429.
Crossref
Crossref
H.L. Yi, P. Chen, Z.Y. Hou, N. Hong, H.L. Cai, Y.B. Xu, D. Wu & G.D. Wang. (2013) A novel design: Partitioning achieved by quenching and tempering (Q–T & P) in an aluminium-added low-density steel. Scripta Materialia 68:6, pages 370-374.
Crossref
Crossref
S.W. Ooi, P. Hill, M. Rawson & H.K.D.H. Bhadeshia. (2013) Effect of retained austenite and high temperature Laves phase on the work hardening of an experimental maraging steel. Materials Science and Engineering: A 564, pages 485-492.
Crossref
Crossref
C. Heinze, A. Pittner, M. Rethmeier & S.S. Babu. (2013) Dependency of martensite start temperature on prior austenite grain size and its influence on welding-induced residual stresses. Computational Materials Science 69, pages 251-260.
Crossref
Crossref
M. A. Alvarado-Meza, E. García-Sanchez, O. Covarrubias-Alvarado, A. Salinas-Rodriguez, M. P. Guerrero-Mata & R. Colás. (2012) Effect of the High-Temperature Deformation on the M s Temperature in a Low C Martensitic Stainless Steel. Journal of Materials Engineering and Performance 22:2, pages 345-350.
Crossref
Crossref
Javad Mola & Bruno C. De Cooman. (2012) Quenching and Partitioning (Q&P) Processing of Martensitic Stainless Steels. Metallurgical and Materials Transactions A 44:2, pages 946-967.
Crossref
Crossref
Sina Salari, Malek Naderi, Ulrich Prahl & Wolfgang Bleck. (2012) Quantification of Phase Transformation Kinetics under Thermomechanical Conditions Using Dilatometry Data. Advanced Materials Research 622-623, pages 581-584.
Crossref
Crossref
Junhak Pak, Dong Woo Suh & H. K. D. H. Bhadeshia. (2012) Displacive Phase Transformation and Surface Effects Associated with Confocal Laser Scanning Microscopy. Metallurgical and Materials Transactions A 43:12, pages 4520-4524.
Crossref
Crossref
Swarup Kumar Ghosh & Partha Protim Chattopadhyay. (2012) Phase Evolution and Mechanical Behavior of 0.36 wt% C High Strength TRIP-Assisted Steel. steel research international 83:12, pages 1163-1171.
Crossref
Crossref
H.-S. Yang, J.H. Jang, H.K.D.H. Bhadeshia & D.W. Suh. (2012)
Critical assessment: Martensite-start temperature for the
transformation
. Calphad 36, pages 16-22.
Crossref
Crossref
H.K.D.H. Bhadeshia. (2012) Steels for bearings. Progress in Materials Science 57:2, pages 268-435.
Crossref
Crossref
K. D. Clarke, C. J. Van Tyne, C. J. Vigil & R. E. Hackenberg. (2011) Induction Hardening 5150 Steel: Effects of Initial Microstructure and Heating Rate. Journal of Materials Engineering and Performance 20:2, pages 161-168.
Crossref
Crossref
Mehran Maalekian & Ernst Kozeschnik. (2011) Modeling mechanical effects on promotion and retardation of martensitic transformation. Materials Science and Engineering: A 528:3, pages 1318-1325.
Crossref
Crossref
Seok-Jae Lee & Kester D. Clarke. (2010) A Conversional Model for Austenite Formation in Hypereutectoid Steels. Metallurgical and Materials Transactions A 41:12, pages 3027-3031.
Crossref
Crossref
Seok-Jae Lee, Kester D. Clarke & Chester J. Van Tyne. (2010) An On-Heating Dilation Conversional Model for Austenite Formation in Hypoeutectoid Steels. Metallurgical and Materials Transactions A 41:9, pages 2224-2235.
Crossref
Crossref
H. Bhadeshia. (2010) Phase transformations contributing to the properties of modern steels. Bulletin of the Polish Academy of Sciences: Technical Sciences 58:2, pages 255-265.
Crossref
Crossref
Sangeeta Khare, Kyooyoung Lee & H.K.D.H. Bhadeshia. (2010) Carbide-Free Bainite: Compromise between Rate of Transformation and Properties. Metallurgical and Materials Transactions A 41:4, pages 922-928.
Crossref
Crossref
J. R. C. Guimarães & P. R. Rios. (2010) Martensite start temperature and the austenite grain-size. Journal of Materials Science 45:4, pages 1074-1077.
Crossref
Crossref
Y. Granbom, L. Ryde & J. Jeppsson. (2010) Simulation of the Soaking and Gas Jet Cooling in a Continuous Annealing Line using Dilatometry. steel research international 81:2, pages 158-167.
Crossref
Crossref
S. W. Ooi, Y. R. Cho, J. K. Oh & H. K. D. H. Bhadeshia. 2010. ICOMAT. ICOMAT
179
185
.
Hong-Seok Yang, Jun Hak Park & H. K. D. H. Bhadeshia. 2010. ICOMAT. ICOMAT
695
702
.
Mehran Maalekian & Ernst Kozeschnik. (2010) Modeling the Effect of Stress and Plastic Strain on Martensite Transformation. Materials Science Forum 638-642, pages 2634-2639.
Crossref
Crossref
H.-G. Lambers, S. Tschumak, H.J. Maier & D. Canadinc. (2010) Pre-deformation–transformation plasticity relationship during martensitic transformation. Materials Science and Engineering: A 527:3, pages 625-633.
Crossref
Crossref
Sangeeta Khare, Kyooyoung Lee & H. K. D. H. Bhadeshia. (2009) Relative effects of Mo and B on ferrite and bainite kinetics in strong steels. International Journal of Materials Research 100:11, pages 1513-1520.
Crossref
Crossref
H. K. D. H. Bhadeshia. (2009) Neural Networks and Information in Materials Science. Statistical Analysis and Data Mining 1:5, pages 296-305.
Crossref
Crossref