Citations (155)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (23)
J. A. Francis. (2022) A perspective on welding technology challenges in the nuclear sector. Science and Technology of Welding and Joining 27:4, pages 309-317.
Read now
Read now
Niyanth Sridharan & Kevin Field. (2019) A Road Map for the Advanced Manufacturing of Ferritic-Martensitic Steels. Fusion Science and Technology 75:4, pages 264-274.
Read now
Read now
R. J. Moat, S. Ooi, A. A. Shirzadi, H. Dai, A. F. Mark, H. K. D. H. Bhadeshia & P. J. Withers. (2018) Residual stress control of multipass welds using low transformation temperature fillers. Materials Science and Technology 34:5, pages 519-528.
Read now
Read now
G. Sun, X. Fang, Z. Tong, Z. Ni & Y. Lu. (2016) Effect of laser shock peening on aluminium alloy laser-welds. Surface Engineering 32:12, pages 943-948.
Read now
Read now
A. Martinez Hurtado, J. A. Francis & N. P. C. Stevens. (2016) An assessment of residual stress mitigation strategies for laser clad deposits. Materials Science and Technology 32:14, pages 1484-1494.
Read now
Read now
W. Guo, J. A. Francis, L. Li, A. N. Vasileiou, D. Crowther & A. Thompson. (2016) Residual stress distributions in laser and gas-metal-arc welded high-strength steel plates. Materials Science and Technology 32:14, pages 1449-1461.
Read now
Read now
K. Zhang, Y. Zhou, S. Zhao & J. Chen. (2016) Numerical and experimental investigation of thickness effect on residual stress measurement. Materials Science and Technology 32:14, pages 1495-1504.
Read now
Read now
N. O'Meara, H. Abdolvand, J. A. Francis, S. D. Smith & P. J. Withers. (2016) Quantifying the metallurgical response of a nuclear steel to welding thermal cycles. Materials Science and Technology 32:14, pages 1517-1532.
Read now
Read now
H. Wang, H. Y. Jing, L. Zhao, Y. D. Han & L. Y. Xu. (2016) Study on residual stress in socket weld by numerical simulation and experiment. Science and Technology of Welding and Joining 21:6, pages 504-514.
Read now
Read now
M. Xu, J. Chen, Y. Jin, Y. Li & H. Lu. (2015) Effects of weld metal strength and transformation temperature on welding residual stress. Science and Technology of Welding and Joining 20:3, pages 208-215.
Read now
Read now
T. I. Ramjaun, H. J. Stone, L. Karlsson, M. A. Gharghouri, K. Dalaei, R. J. Moat & H. K. D. H. Bhadeshia. (2014) Surface residual stresses in multipass welds produced using low transformation temperature filler alloys. Science and Technology of Welding and Joining 19:7, pages 623-630.
Read now
Read now
T. I. Ramjaun, H. J. Stone, L. Karlsson, J. Kelleher, S. W. Ooi, K. Dalaei, J. Rebelo Kornmeier & H. K. D. H. Bhadeshia. (2014) Effects of dilution and baseplate strength on stress distributions in multipass welds deposited using low transformation temperature filler alloys. Science and Technology of Welding and Joining 19:6, pages 461-467.
Read now
Read now
D J Abson & J S Rothwell. (2013) Review of type IV cracking of weldments in 9–12%Cr creep strength enhanced ferritic steels. International Materials Reviews 58:8, pages 437-473.
Read now
Read now
K Y Wang, H Lu & L Gong. (2013) Evolution of residual stresses in dissimilar steel surfacing layers during process of post-weld heat treatment. Science and Technology of Welding and Joining 18:3, pages 210-215.
Read now
Read now
M J Xu, H Lu, C Yu, J J Xu & J M Chen. (2013) Finite element simulation of butt welded 2·25Cr–1·6W steel pipe incorporating bainite phase transformation. Science and Technology of Welding and Joining 18:3, pages 184-190.
Read now
Read now
H E Coules. (2013) Contemporary approaches to reducing weld induced residual stress. Materials Science and Technology 29:1, pages 4-18.
Read now
Read now
Y M Huang, Y Li, K He & C X Pan. (2011) Micrometre scale residual stress measurement in fusion boundary of dissimilar steel welded joints using nanoindenter system. Materials Science and Technology 27:9, pages 1453-1460.
Read now
Read now
A De & T DebRoy. (2011) A perspective on residual stresses in welding. Science and Technology of Welding and Joining 16:3, pages 204-208.
Read now
Read now
V. Venkateswara Rao, G. Madhusudhan Reddy & A. V. Sitarama Raju. (2010) Microstructure, hardness and residual stress distribution of dissimilar metal electron beam welds: maraging steel and high strength low alloy steel. Materials Science and Technology 26:12, pages 1503-1512.
Read now
Read now
H. Dai, J. A. Francis & P. J. Withers. (2010) Prediction of residual stress distributions for single weld beads deposited on to SA508 steel including phase transformation effects. Materials Science and Technology 26:8, pages 940-949.
Read now
Read now
S S Babu. (2009) Thermodynamic and kinetic models for describing microstructure evolution during joining of metals and alloys. International Materials Reviews 54:6, pages 333-367.
Read now
Read now
J. A. Francis, M. Turski & P. J. Withers. (2009) Measured residual stress distributions for low and high heat input single weld beads deposited on to SA508 steel. Materials Science and Technology 25:3, pages 325-334.
Read now
Read now
H.-H. Lee, S.-H. Wang, C.-Y. Shih, C.-M. Cheng, H.-C. Hsu, K. Kan & C.-M. Sung. (2008) Relaxing welding residual stresses by diamond like carbon coating on duplex titanium alloys. Science and Technology of Welding and Joining 13:1, pages 75-79.
Read now
Read now
Articles from other publishers (132)
Wenchun Jiang, Wenlu Xie, Xinyue Qi, Yangguang Deng, Yu Wan & Xuefang Xie. (2024) Residual stress and microstructure control in welding of SA508 low alloy steel. International Journal of Pressure Vessels and Piping 207, pages 105090.
Crossref
Crossref
Zeyuan Miao, Lee Margetts, Anastasia N. Vasileiou & Hujun Yin. (2023) Surrogate model development using simulation data to predict weld residual stress: A case study based on the NeT-TG1 benchmark. International Journal of Pressure Vessels and Piping 206, pages 105014.
Crossref
Crossref
Seyedeh Fatemeh Nabavi, Anooshiravan Farshidianfar & Hamid Dalir. (2023) A comprehensive review on recent laser beam welding process: geometrical, metallurgical, and mechanical characteristic modeling. The International Journal of Advanced Manufacturing Technology 129:11-12, pages 4781-4828.
Crossref
Crossref
Zhaogui Lai, Feifei Huang, Lei Wen, Zhaoyang Zhao & Ying Jin. (2023)
Study on Microelectrochemical Inhomogeneity of an SA508–309
L
/308L Overlay Welded Joint
. Analytical Chemistry.
Crossref
Crossref
T.F. Flint, T. Dutilleul & W. Kyffin. (2023) A fundamental investigation into the role of beam focal point, and beam divergence, on thermo-capillary stability and evolution in electron beam welding applications. International Journal of Heat and Mass Transfer 212, pages 124262.
Crossref
Crossref
D.K. Rissaki, P.G. Benardos, G.-C. Vosniakos, M.C. Smith & A.N. Vasileiou. (2023) Residual stress prediction of arc welded austenitic pipes with artificial neural network ensemble using experimental data. International Journal of Pressure Vessels and Piping 204, pages 104954.
Crossref
Crossref
Thanh Tuan Nguyen, Van Son Pham, Hoang Anh Tran, Duc Huy Nguyen, Thu Huong Nguyen & Hong Bo Dinh. (2023) Effect of Residual Stress on Mode-I Stress Intensity Factor: A Quantitative Evaluation and a Suggestion of an Estimating Equation. Metals 13:6, pages 1132.
Crossref
Crossref
Jun Fu, G. M. A. M. El-Fallah, Qing Tao & Hongbiao Dong. (2023) A Parameterized Leblond–Devaux Equation for Predicting Phase Evolution during Welding E36 and E36Nb Marine Steels. Materials 16:8, pages 3150.
Crossref
Crossref
Yongle Sun, Mike Smith, Thomas Dutilleul & Steve Jones. (2022) Assessing and mitigating the distortion and stress during electron beam welding of a large shell-flange structure. International Journal of Pressure Vessels and Piping 199, pages 104772.
Crossref
Crossref
Jiamin Sun, Thomas Nitschke-Pagel & Klaus Dilger. (2022) Influence of strain-hardening models and slopes on the predicted residual stresses in structural steel S235 weldments. Journal of Materials Research and Technology 19, pages 4044-4062.
Crossref
Crossref
Tao Wu, Yunwu Ma, Hongbo Xia, Peihao Geng, Thomas Niendorf & Ninshu Ma. (2022) Measurement and simulation of residual stresses in laser welded CFRP/steel lap joints. Composite Structures 292, pages 115687.
Crossref
Crossref
Vasileios Akrivos, Ondrej Muransky, Lionel Depradeux, Michael C. Smith, Anastasia Vasileiou, Viorel Deaconu & Priyesh Kapadia. (2022) On the Accurate Prediction of Residual Stress in a Three-Pass Slot Nickel-Base Repair Weld by Numerical Simulations. Journal of Manufacturing and Materials Processing 6:3, pages 61.
Crossref
Crossref
V. Bharadwaj, A.K. Rai, B.N. Upadhyaya, R. Singh, S.K. Rai & K.S. Bindra. (2022) A study on effect of heat input on mode of welding, microstructure and mechanical strength in pulsed laser welding of Zr-2.5 wt.%Nb alloy. Journal of Nuclear Materials 564, pages 153685.
Crossref
Crossref
Victor Igwemezie, Muhammad Shamir, Ali Mehmanparast & Supriyo Ganguly. (2022) A review of LTT welding alloys for structural steels: Design, application and results. Journal of Advanced Joining Processes 5, pages 100110.
Crossref
Crossref
Peng Wen, Michael R. Tonks, Simon R. Phillpot & Douglas E. Spearot. (2022) The effect of stress on the migration of He gas bubbles under a thermal gradient in Fe by phase-field modeling. Computational Materials Science 209, pages 111392.
Crossref
Crossref
Víctor H. Baltazar-Hernández, Enrique A. López-Baltazar, Francisco Alvarado-Hernández, Salvador Gómez-Jiménez, José Jorge Ruiz-Mondragón, Elliot Biro & Norman Zhou. (2022) Surface Residual Stress Analysis in GMAW and LBW of the Dissimilar TRIP-DP Steels Joint: An Experimental Approach. Metals 12:5, pages 880.
Crossref
Crossref
Zhen Sun & Xinghua Yu. (2022) Prediction of welding residual stress and distortion in multi-layer butt-welded 22SiMn2TiB steel with LTT filling metal. Journal of Materials Research and Technology 18, pages 3564-3580.
Crossref
Crossref
Joao Sartori Moreno, Fabio Faria Conde, Celso Alves Correa, Luiz Henrique Barbosa, Erenilton Pereira da Silva, Julian Avila, Ricardo Henrique Buzolin & Haroldo Cavalcanti Pinto. (2022) Pulsed FCAW of Martensitic Stainless Clads onto Mild Steel: Microstructure, Hardness, and Residual Stresses. Materials 15:8, pages 2715.
Crossref
Crossref
Emre Korkmaz & Cemal Meran. (2021) Gas metal arc welding of XPF800 steel for automotive industry: Microstructural evaluation and mechanical properties investigation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236:4, pages 747-756.
Crossref
Crossref
Ninshu Ma, Dean Deng, Naoki Osawa, Sherif Rashed, Hidekazu Murakawa & Yukio Ueda. 2022. Welding Deformation and Residual Stress Prevention. Welding Deformation and Residual Stress Prevention
147
204
.
Sachin Bhardwaj, Arvind Keprate & R. M. C. Ratnayake. 2022. Intelligent Technologies and Applications. Intelligent Technologies and Applications
45
57
.
A. Cattivelli, M.J. Roy, M.G. Burke, J. Dhers, T.L. Lee & J.A. Francis. (2021) Internal stresses in a clad pressure vessel steel during post weld heat treatment and their relevance to underclad cracking. International Journal of Pressure Vessels and Piping 193, pages 104448.
Crossref
Crossref
J.X. Fang, G.Z. Ma, H.L. Tian, S.B. Li, H.S. Huang, Y. Liu, Y.L. Jiang & B. Liu. (2021) Transformation-induced strain of a low transformation temperature alloy with high hardness during laser metal deposition. Journal of Manufacturing Processes 68, pages 1585-1595.
Crossref
Crossref
Pradeeptta Kumar Taraphdar, Manas Mohan Mahapatra, Arun Kumar Pradhan, Pavan Kumar Singh, Kamal Sharma & Suranjit Kumar. (2021) Evaluation of through-thickness residual stresses and microstructure in SA516 Gr. 70 steel welds. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:6-7, pages 958-973.
Crossref
Crossref
Y.L. Sun, A.N. Vasileiou, E.J. Pickering, J. Collins, G. Obasi, V. Akrivos & M.C. Smith. (2021) Impact of weld restraint on the development of distortion and stress during the electron beam welding of a low-alloy steel subject to solid state phase transformation. International Journal of Mechanical Sciences 196, pages 106244.
Crossref
Crossref
Yashar Javadi, Nina E. Sweeney, Ehsan Mohseni, Charles N. MacLeod, David Lines, Momchil Vasilev, Zhen Qiu, Carmelo Mineo, Stephen G. Pierce & Anthony Gachagan. (2021) Investigating the effect of residual stress on hydrogen cracking in multi-pass robotic welding through process compatible non-destructive testing. Journal of Manufacturing Processes 63, pages 80-87.
Crossref
Crossref
Niyanth Sridharan, Jeffrey Bunn, Michael Kottman, Chris M. Fancher, Andrew Payzant, Mark Noakes, Andrzej Nycz, Lonnie Love, Badri Narayanan & S.S. Babu. (2021) Consumable development to tailor residual stress in parts fabricated using directed energy deposition processes. Additive Manufacturing 39, pages 101837.
Crossref
Crossref
Raja Chakrabarti, Joydeep Roy, Pankaj Biswas & Subhas Chandra Saha. (2021) Influence of Microstructural Changes on Residual Stress Characteristics and Macro-Hardness of Submerged Arc Welded P-91 Steel Plates. Soldagem & Inspeção 26.
Crossref
Crossref
Thale R. Smith, Joshua D. Sugar, Chris San Marchi & Julie M. Schoenung. (2020) Microstructural development in DED stainless steels: applying welding models to elucidate the impact of processing and alloy composition. Journal of Materials Science 56:1, pages 762-780.
Crossref
Crossref
Christian M Petrie & Niyanth Sridharan. (2020) In situ measurement of phase transformations and residual stress evolution during welding using spatially distributed fiber-optic strain sensors*. Measurement Science and Technology 31:12, pages 125602.
Crossref
Crossref
V. S. M. Ramakrishna R, P. H. S. L. R. Amrutha, R. A. Rahman Rashid & S. Palanisamy. (2020) Narrow gap laser welding (NGLW) of structural steels—a technological review and future research recommendations. The International Journal of Advanced Manufacturing Technology 111:7-8, pages 2277-2300.
Crossref
Crossref
Y.L. Sun, C.J. Hamelin, A.N. Vasileiou, Q. Xiong, T.F. Flint, G. Obasi, J.A. Francis & M.C. Smith. (2020) Effects of dilution on the hardness and residual stresses in multipass steel weldments. International Journal of Pressure Vessels and Piping 187, pages 104154.
Crossref
Crossref
Qinghu Guo, Baoshuai Du, Guoxiang Xu, Donggao Chen, Liangchao Ma, Dafeng Wang & Yingying Zhang. (2020) Influence of filler metal on residual stress in multi-pass repair welding of thick P91 steel pipe. The International Journal of Advanced Manufacturing Technology 110:11-12, pages 2977-2989.
Crossref
Crossref
Ze-Chen Fang, Zhi-Lin Wu, Chen-Guang Huang & Chen-Wu Wu. (2020) Review on residual stress in selective laser melting additive manufacturing of alloy parts. Optics & Laser Technology 129, pages 106283.
Crossref
Crossref
He-Jie Guo, Chao Ling, Esteban P. Busso, Zheng Zhong & Dong-Feng Li. (2020) Crystal plasticity based investigation of micro-void evolution under multi-axial loading conditions. International Journal of Plasticity 129, pages 102673.
Crossref
Crossref
Wei Chen, Lianyong Xu, Lei Zhao, Yongdian Han, Hongyang Jing, Yang Zhang & Yuan Li. (2020) Thermo-mechanical-metallurgical modeling and validation for ferritic steel weldments. Journal of Constructional Steel Research 166, pages 105948.
Crossref
Crossref
P. Mac Ardghail, S.B. Leen & N.M. Harrison. (2020) A review of thermal, microstructural and constitutive modelling of 9Cr steel for power plant applications: Towards a through-process model for structural integrity of welded connections. International Journal of Pressure Vessels and Piping 180, pages 104037.
Crossref
Crossref
A.N. Vasileiou, C.J. Hamelin, M.C. Smith, J.A. Francis, Y.L. Sun, T.F. Flint, Q. Xiong & V. Akrivos. (2020) Electron beam weld modelling of ferritic steel: effect of prior-austenite grain size on transformation kinetics. Procedia Manufacturing 51, pages 842-847.
Crossref
Crossref
Wenqing Zhou, Pingsha Dong, Ingrit Lillemäe & Heikki Remes. (2020) Analytical treatment of distortion effects on fatigue behaviors of lightweight shipboard structures. International Journal of Fatigue 130, pages 105286.
Crossref
Crossref
Nausheen Naz, Fawad Tariq & Rasheed Ahmed Baloch. 2019. Handbook of Case Histories in Failure Analysis. Handbook of Case Histories in Failure Analysis
593
602
.
Y. L. Sun, C. J. Hamelin, T. F. Flint, A. N. Vasileiou, J. A. Francis & M. C. Smith. (2019) Prediction of Dilution and Its Impact on the Metallurgical and Mechanical Behavior of a Multipass Steel Weldment. Journal of Pressure Vessel Technology 141:6.
Crossref
Crossref
J.A. Francis, N. Holtum, S. Olschok, M.J. Roy, A.N. Vasileiou, S. Jakobs, U. Reisgen & M.C. Smith. (2019) Vacuum laser welding of SA508 steel. Journal of Materials Processing Technology 274, pages 116269.
Crossref
Crossref
Dinesh W. Rathod, Yongle Sun, Gideon Obasi & Matthew J. Roy. (2019) Effect of multiple passes on Lüders/yield plateaus, microstructure and tensile behaviour of narrow-gap thick-section weld plates. Journal of Materials Science 54:19, pages 12833-12850.
Crossref
Crossref
Hitesh Arora, Rupinder Singh & Gurinder Singh Brar. (2019) Thermal and structural modelling of arc welding processes: A literature review. Measurement and Control 52:7-8, pages 955-969.
Crossref
Crossref
A. R. Pavan, B. Arivazhagan, M. Zubairuddin, S. Mahadevan & M. Vasudevan. (2019) Thermomechanical Analysis of A-TIG and MP-TIG Welding of 2.25Cr-1Mo Steel Considering Phase Transformation. Journal of Materials Engineering and Performance 28:8, pages 4903-4917.
Crossref
Crossref
J.X. Fang, S.B. Li, S.Y. Dong, Y.J. Wang, H.S. Huang, Y.L. Jiang & B. Liu. (2019) Effects of phase transition temperature and preheating on residual stress in multi-pass & multi-layer laser metal deposition. Journal of Alloys and Compounds 792, pages 928-937.
Crossref
Crossref
P. Mac Ardghail, N. Harrison & S.B. Leen. (2019) A process-structure-property model for welding of 9Cr power plant components: The influence of welding process temperatures on in-service cyclic plasticity response. International Journal of Pressure Vessels and Piping 173, pages 26-44.
Crossref
Crossref
G. Obasi, E. J. Pickering, A. N. Vasileiou, Y. L. Sun, D. Rathod, M. Preuss, J. A. Francis & M. C. Smith. (2019) Measurement and Prediction of Phase Transformation Kinetics in a Nuclear Steel During Rapid Thermal Cycles. Metallurgical and Materials Transactions A 50:4, pages 1715-1731.
Crossref
Crossref
Victor Igwemezie, Ali Mehmanparast & Athanasios Kolios. (2019) Current trend in offshore wind energy sector and material requirements for fatigue resistance improvement in large wind turbine support structures – A review. Renewable and Sustainable Energy Reviews 101, pages 181-196.
Crossref
Crossref
W.J. Brayshaw, A.J. Cooper & A.H. Sherry. (2019) Assessment of the micro-mechanical fracture processes within dissimilar metal welds. Engineering Failure Analysis 97, pages 820-835.
Crossref
Crossref
Shi-yun Dong, Xiang-yi Feng, Jin-xiang Fang & Shi-xing Yan. 2019. Stainless Steels and Alloys. Stainless Steels and Alloys.
Vladimir Ivanovitch Monine, Rodrigo Stohler Gonzaga, Francisco Werley Cipriano Farias, Elisa Kimus Dias Passos & João da Cruz Payão Filho. (2019) Study of Mechanical Behavior and X-Ray Elastic Constants of Nickel Alloy Weld Overlay. Materials Research 22:4.
Crossref
Crossref
Chen Mingya, Yu Weiwei, Xue Fei, Ku Francis, Chen Zhilin, Wang Weiqiang, Yu Yangtian & Shi Jinhua. (2019) 3-D FE analyses of WRS and simplified elastic-plastic fracture mechanics assessment of a repaired weld. Nuclear Engineering and Design 341, pages 124-136.
Crossref
Crossref
A. Mirzaee-Sisan & G. Wu. (2019) Residual stress in pipeline girth welds- A review of recent data and modelling. International Journal of Pressure Vessels and Piping 169, pages 142-152.
Crossref
Crossref
Constant Ramard, Denis Carron, Philippe Pilvin & Florent Bridier. (2018) Numerical Simulation of Residual Stresses due to Multipass Welding in High Strength Steel Plates and Validation against Experimental Measurements. Materials Science Forum 941, pages 269-273.
Crossref
Crossref
Abhishek Ghosh & Manojit Ghosh. (2018) Tensile and impact behaviour of thermo mechanically treated and micro-alloyed medium carbon steel bar. Construction and Building Materials 192, pages 657-670.
Crossref
Crossref
P. Mac Ardghail, N. Harrison & S.B. Leen. (2018) A through-process, thermomechanical model for predicting welding-induced microstructure evolution and post-weld high-temperature fatigue response. International Journal of Fatigue 112, pages 216-232.
Crossref
Crossref
Juhwa Lee, Jeongho Hwang & Dongho Bae. (2018) Welding Residual Stress Analysis and Fatigue Strength Assessment at Elevated Temperature for Multi-pass Dissimilar Material Weld Between Alloy 617 and P92 Steel. Metals and Materials International 24:4, pages 877-885.
Crossref
Crossref
Wenchun Jiang, Wei Chen, Wanchuck Woo, Shan-Tung Tu, Xian-Cheng Zhang & Vyacheslav Em. (2018) Effects of low-temperature transformation and transformation-induced plasticity on weld residual stresses: Numerical study and neutron diffraction measurement. Materials & Design 147, pages 65-79.
Crossref
Crossref
J. Ni, J. Vande Voorde, J. Antonissen & M. Abdel Wahab. (2018) Dependency of phase transformation on the prior austenite grain size and its influence on welding residual stress of S700 steel. Welding in the World 62:4, pages 699-712.
Crossref
Crossref
Shi-yun Dong, Chao-qun Song, Xiang-yi Feng, Yong-jian Li & Shi-xing Yan. 2018. Residual Stress Analysis on Welded Joints by Means of Numerical Simulation and Experiments. Residual Stress Analysis on Welded Joints by Means of Numerical Simulation and Experiments.
J. Balakrishnan, A.N. Vasileiou, J.A. Francis, M.C. Smith, M.J. Roy, M.D. Callaghan & N.M. Irvine. (2018) Residual stress distributions in arc, laser and electron-beam welds in 30 mm thick SA508 steel: A cross-process comparison. International Journal of Pressure Vessels and Piping 162, pages 59-70.
Crossref
Crossref
Miltiadis Alamaniotis, Jino Mathew, Alexander Chroneos, Michael E. Fitzpatrick & Lefteri H. Tsoukalas. (2018) Probabilistic kernel machines for predictive monitoring of weld residual stress in energy systems. Engineering Applications of Artificial Intelligence 71, pages 138-154.
Crossref
Crossref
Eduardo José Fernandes Rocha, Tiago de Sousa Antonino, Pablo Batista Guimarães, Ricardo Artur Sanguinetti Ferreira, José Maria Andrade Barbosa & Janardan Rohatgi. (2018) Modeling of the temperature field generated by the deposition of weld bead on a steel butt joint by FEM techniques and thermographic images.. Materials Research 21:3.
Crossref
Crossref
T.F. Flint, J.A. Francis, M.C. Smith & A.N. Vasileiou. (2018) Semi-analytical solutions for the transient temperature fields induced by a moving heat source in an orthogonal domain. International Journal of Thermal Sciences 123, pages 140-150.
Crossref
Crossref
J. Wang & A. Mirzaee-Sisan. (2018) The effect of plasticity on residual stress generation and redistribution in offshore pipelines. International Journal of Pressure Vessels and Piping 159, pages 101-110.
Crossref
Crossref
A. Mirzaee-Sisan & A. Bastola. (2017) Redistribution of welding residual stress following high plastic deformation in seamless pipes. International Journal of Pressure Vessels and Piping 158, pages 37-50.
Crossref
Crossref
J.A. Francis, S. Gach, S. Olscho, U. Reisgen, A. Haeusler, A. Gillner & R. Poprawe. (2017) Characterisation of quasi-stationary temperature fields in laser welding by infrared thermography. Materialwissenschaft und Werkstofftechnik 48:12, pages 1283-1289.
Crossref
Crossref
Anastasia N. Vasileiou, Michael C. Smith, Jeyaganesh Balakrishnan, John A. Francis & Cory J. Hamelin. (2017) The impact of transformation plasticity on the electron beam welding of thick-section ferritic steel components. Nuclear Engineering and Design 323, pages 309-316.
Crossref
Crossref
J.C. Feng, D.W. Rathod, M.J. Roy, J.A. Francis, W. Guo, N.M. Irvine, A.N. Vasileiou, Y.L. Sun, M.C. Smith & L. Li. (2017) An evaluation of multipass narrow gap laser welding as a candidate process for the manufacture of nuclear pressure vessels. International Journal of Pressure Vessels and Piping 157, pages 43-50.
Crossref
Crossref
T.F. Flint, J.A. Francis, M.C. Smith & J. Balakrishnan. (2017) Extension of the double-ellipsoidal heat source model to narrow-groove and keyhole weld configurations. Journal of Materials Processing Technology 246, pages 123-135.
Crossref
Crossref
Y. Javadi, J.N. Walsh, A. Elrefaey, M.J. Roy & J.A. Francis. (2017) Measurement of residual stresses induced by sequential weld buttering and cladding operations involving a 2.25Cr-1Mo substrate material. International Journal of Pressure Vessels and Piping 154, pages 58-74.
Crossref
Crossref
Suo Li, Sendong Ren, Yanbin Zhang, Dean Deng & Hidekazu Murakawa. (2017) Numerical investigation of formation mechanism of welding residual stress in P92 steel multi-pass joints. Journal of Materials Processing Technology 244, pages 240-252.
Crossref
Crossref
S. Madhavan, M. Kamaraj, L. Vijayaraghavan & K. Srinivasa Rao. (2016) Cold Metal Transfer Welding of Dissimilar A6061 Aluminium Alloy-AZ31B Magnesium Alloy: Effect of Heat Input on Microstructure, Residual Stress and Corrosion Behavior. Transactions of the Indian Institute of Metals 70:4, pages 1047-1054.
Crossref
Crossref
Md. Basiruddin Sk, Badirujjaman Syed, Arya Chatterjee, Arijit Lodh, Saurabh Kundu & Debalay Chakrabarti. (2017) Effect of Thermal Exposure on the Charpy Impact Properties of Thermo-Mechanically Treated Reinforcement Steel Bar. steel research international 88:5, pages 1600286.
Crossref
Crossref
S. Neubert, A. Pittner & M. Rethmeier. (2017) Influence of non-uniform martensitic transformation on residual stresses and distortion of GMA-welding. Journal of Constructional Steel Research 128, pages 193-200.
Crossref
Crossref
Luiz Leite da Silva, Vladimir S. Ribeiro, Denis H. Bianchi Scaldaferri, Emerson Giovanni Rabello, Wagner R. C. Campos & Tanius R. Mansur. (2016) Development and Test of an Equipment to Measure Residual Strain Inside Pipes Using the Hole-Drilling Method. Latin American Journal of Solids and Structures 13:13, pages 2439-2450.
Crossref
Crossref
A.S. Elmesalamy, H. Abdolvand, J.N. Walsh, J.A. Francis, W. Suder, S. Williams & L. Li. (2016) Measurement and modelling of the residual stresses in autogenous and narrow gap laser welded AISI grade 316L stainless steel plates. International Journal of Pressure Vessels and Piping 147, pages 64-78.
Crossref
Crossref
Erik R. Denlinger & Pan Michaleris. (2016) Effect of stress relaxation on distortion in additive manufacturing process modeling. Additive Manufacturing 12, pages 51-59.
Crossref
Crossref
J. H. Lee, J. H. Hwang, Y. S. Park, T. M. Kim, D. H. Bae, W. B. Seo & J. W. Han. (2016) Assessing mechanical properties of the dissimilar metal welding between P92 steels and alloy 617 at high temperature. Journal of Mechanical Science and Technology 30:10, pages 4453-4457.
Crossref
Crossref
M. R. Nezamdost, M. R. Nekouie Esfahani, S. H. Hashemi & S. A. Mirbozorgi. (2016) Investigation of temperature and residual stresses field of submerged arc welding by finite element method and experiments. The International Journal of Advanced Manufacturing Technology 87:1-4, pages 615-624.
Crossref
Crossref
Jibrin Sule, Supriyo Ganguly, Wojciech Suder & Thilo Pirling. (2016) Effect of high-pressure rolling followed by laser processing on mechanical properties, microstructure and residual stress distribution in multi-pass welds of 304L stainless steel. The International Journal of Advanced Manufacturing Technology 86:5-8, pages 2127-2138.
Crossref
Crossref
Supriyo Ganguly, Jibrin Sule & Mustapha Y. Yakubu. (2016) Stress Engineering of Multi-pass Welds of Structural Steel to Enhance Structural Integrity. Journal of Materials Engineering and Performance 25:8, pages 3238-3244.
Crossref
Crossref
Dinesh W. Rathod, P.K. Singh, Sunil Pandey & S. Aravindan. (2016) Effect of buffer-layered buttering on microstructure and mechanical properties of dissimilar metal weld joints for nuclear plant application. Materials Science and Engineering: A 666, pages 100-113.
Crossref
Crossref
Carlos Roberto Xavier, Horácio Guimarães Delgado Junior, José Adilson de Castro & Alexandre Furtado Ferreira. (2016) Numerical Predictions for the Thermal History, Microstructure and Hardness Distributions at the HAZ during Welding of Low Alloy Steels. Materials Research 19:3, pages 520-533.
Crossref
Crossref
Mengjia Xu, Junmei Chen, Hao Lu, Jijin Xu, Chun Yu & Xiao Wei. (2016) Effects of residual stress and grain boundary character on creep cracking in 2.25Cr-1.6W steel. Materials Science and Engineering: A 659, pages 188-197.
Crossref
Crossref
Abhishek Mitra, N. Siva Prasad & G. D. Janaki Ram. (2016) Influence of Temperature and Time of Post-weld Heat Treatment on Stress Relief in an 800-mm-Thick Steel Weldment. Journal of Materials Engineering and Performance 25:4, pages 1384-1393.
Crossref
Crossref
Majid Farajian & Dieter Siegele. 2016. Encyclopedia of Iron, Steel, and Their Alloys. Encyclopedia of Iron, Steel, and Their Alloys
3767
3793
.
Md. Basiruddin Sk.A.K. Khan, S. Lenka, B. Syed, J. Chakraborty, D. Chakrabarti, Arghya Deb, S. Chandra & S. Kundu. (2016) Effect of microstructure and texture on the impact transition behaviour of thermo-mechanically treated reinforcement steel bars. Materials & Design 90, pages 1136-1150.
Crossref
Crossref
J.X. Fang, S.Y. Dong, Y.J. Wang, B.S. Xu, Z.H. Zhang, D. Xia & P. He. (2015) The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition. Materials & Design 87, pages 807-814.
Crossref
Crossref
Mengjia Xu, Jijin Xu, Hao Lu, Jieshi Chen, Junmei Chen & Xiao Wei. (2015) Fractal and probability analysis of creep crack growth behavior in 2.25Cr–1.6W steel incorporating residual stresses. Applied Surface Science 359, pages 73-81.
Crossref
Crossref
Edgar López-Martínez, Octavio Vázquez-Gómez, Héctor Javier Vergara-Hernández & Bernardo Campillo. (2015) Effect of initial microstructure on austenite formation kinetics in high-strength experimental microalloyed steels. International Journal of Minerals, Metallurgy, and Materials 22:12, pages 1304-1312.
Crossref
Crossref
Mitchell D. Olson, Michael R. HillEric Willis, Artie G. Peterson, Vipul I. Patel & Ondrej Muránsky. (2015) Assessment of Weld Residual Stress Measurement Precision: Mock-Up Design and Results for the Contour Method. Journal of Nuclear Engineering and Radiation Science 1:3.
Crossref
Crossref
Tatiane Campos Chuvas, Pedro Soucasaux Pires Garcia, Juan Manuel Pardal & Maria da Penha Cindra Fonseca. (2015) Influence of Heat Treatment in Residual Stresses Generated in P91 Steel-pipe Weld. Materials Research 18:3, pages 614-621.
Crossref
Crossref
K.J. Song, Y.H. Wei, Z.B. Dong, R. Ma, X.H. Zhan, W.J. Zheng & K. Fang. (2015) Constitutive model coupled with mechanical effect of volume change and transformation induced plasticity during solid phase transformation for TA15 alloy welding. Applied Mathematical Modelling 39:7, pages 2064-2080.
Crossref
Crossref
Jibrin Sule & Supriyo Ganguly. (2015) Application of Local Mechanical Tensioning and Laser Processing to Modify the Residual Stress State and Microstructural Features of Multi-Pass HSLA Steel. SAE International Journal of Materials and Manufacturing 8:2, pages 494-502.
Crossref
Crossref
Yongzhi Li, Mengjia Xu, Yujing Jin & Hao Lu. (2015) Finite-element Simulation of Low-alloy High Strength Steel Welding Incorporating Improved Martensite Transformation Kinetics and Recrystalization Annealing. ISIJ International 55:7, pages 1448-1453.
Crossref
Crossref
Yongzhi Li, Hao Lu, Chun Yu & Yixiong Wu. (2015) Accurate Prediction of Welding Stress Evolution by Considering Improved Phase Transformation Model. MATERIALS TRANSACTIONS 56:5, pages 715-719.
Crossref
Crossref
M. Daavari & S.A. Sadough Vanini. (2015) Corrosion fatigue enhancement of welded steel pipes by ultrasonic impact treatment. Materials Letters 139, pages 462-466.
Crossref
Crossref
A. Skouras, P.E.J. Flewitt, M. Peel & M.J. Pavier. (2014) Residual stress measurements in a P92 steel-In625 superalloy metal weldment in the as-welded and after post weld heat treated conditions. International Journal of Pressure Vessels and Piping 123-124, pages 10-18.
Crossref
Crossref
Pingsha Dong, Shaopin Song, Jinmiao Zhang & Myung H. Kim. (2014) On residual stress prescriptions for fitness for service assessment of pipe girth welds. International Journal of Pressure Vessels and Piping 123-124, pages 19-29.
Crossref
Crossref
Cory J. Hamelin, Ondrej Muránsky & Lyndon Edwards. (2014) The Influence of Austenite Grain Size during Welding Simulations of Ferritic Steels. Advanced Materials Research 996, pages 512-517.
Crossref
Crossref
Cory J. Hamelin, Ondrej Muránsky, Michael C. Smith, Thomas M. Holden, Vladimir Luzin, Philip J. Bendeich & Lyndon Edwards. (2014) Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments. Acta Materialia 75, pages 1-19.
Crossref
Crossref
John A. Francis, Richard J. Moat, Hamidreza Abdolvand & Alexander Forsey. (2014) An Assessment of the Mechanisms of Transformation Plasticity in SA508 Grade 3 Steel during Simulated Welding Thermal Cycles. Materials Science Forum 777, pages 188-193.
Crossref
Crossref
Jonathan Parker. (2014) In-service behaviour of creep strength enhanced ferritic steels Grade 91 and Grade 92 – Part 2 weld issues. International Journal of Pressure Vessels and Piping 114-115, pages 76-87.
Crossref
Crossref
D.J. Abson & G. Mathers. 2014. Structural Alloys for Power Plants. Structural Alloys for Power Plants
421
446
.
Ahmed Elmesalamy, J.A. Francis & L. Li. (2014) A comparison of residual stresses in multi pass narrow gap laser welds and gas-tungsten arc welds in AISI 316L stainless steel. International Journal of Pressure Vessels and Piping 113, pages 49-59.
Crossref
Crossref
Masaru Takahashi & Hiroyuki Y. Yasuda. (2013) Variant selection of martensites in steel welded joints with low transformation temperature weld metals. Journal of Alloys and Compounds 577, pages S601-S604.
Crossref
Crossref
R.S. Coelho, M. Corpas, J.A. Moreto, A. Jahn, J. Standfuß, A. Kaysser-Pyzalla & H. Pinto. (2013) Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment. Materials Science and Engineering: A 578, pages 125-133.
Crossref
Crossref
O. Muránsky, T.M. Holden, O. Kirstein, J.A. James, A.M. Paradowska & L. Edwards. (2013) Evaluation of residual stresses in electron-beam welded Zr2.5Nb0.9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange. Journal of Nuclear Materials 438:1-3, pages 154-162.
Crossref
Crossref
Hamed Masumi Asl & Ali Vatani. (2013) Numerical analysis of the burn-through at in-service welding of 316 stainless steel pipeline. International Journal of Pressure Vessels and Piping 105-106, pages 49-59.
Crossref
Crossref
C. Heinze, A. Pittner, M. Rethmeier & S.S. Babu. (2013) Dependency of martensite start temperature on prior austenite grain size and its influence on welding-induced residual stresses. Computational Materials Science 69, pages 251-260.
Crossref
Crossref
Pablo Batista Guimarães, Paulo Marcelo Almeida Pedrosa, Yogendra Prasad Yadava, José Maria Andrade Barbosa, Aníbal Veras Siqueira Filho & Ricardo Artur Sanguinetti Ferreira. (2013) Determination of Residual Stresses Numerically Obtained in ASTM AH36 Steel Welded by TIG Process. Materials Sciences and Applications 04:04, pages 268-274.
Crossref
Crossref
A.F. Mark, J.A. Francis, H. Dai, M. Turski, P.R. Hurrell, S.K. Bate, J.R. Kornmeier & P.J. Withers. (2012) On the evolution of local material properties and residual stress in a three-pass SA508 steel weld. Acta Materialia 60:8, pages 3268-3278.
Crossref
Crossref
O. Muránsky, C.J. Hamelin, M.C. Smith, P.J. Bendeich & L. Edwards. (2012) The effect of plasticity theory on predicted residual stress fields in numerical weld analyses. Computational Materials Science 54, pages 125-134.
Crossref
Crossref
Cory J. Hamelin, Ondrej Muránsky, Philip Bendeich, Ken Short & Lyndon Edwards. (2012) Predicting Solid-State Phase Transformations during Welding of Ferritic Steels. Materials Science Forum 706-709, pages 1403-1408.
Crossref
Crossref
M. Turski, J.A. Francis, P.R. Hurrell, S.K. Bate, S. Hiller & P.J. Withers. (2012) Effects of stop–start features on residual stresses in a multipass austenitic stainless steel weld. International Journal of Pressure Vessels and Piping 89, pages 9-18.
Crossref
Crossref
Zhongyuan Qian, Scott Chumbley & Eric Johnson. (2011) The effect of specimen dimension on residual stress relaxation of carburized and quenched steels. Materials Science and Engineering: A 529, pages 246-252.
Crossref
Crossref
C Walker. (2011) A theoretical review of the operation of vibratory stress relief with particular reference to the stabilization of large-scale fabrications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 225:3, pages 195-204.
Crossref
Crossref
Christoph HeinzeArne Kromm, Christopher SchwenkThomas KannengiesserMichael Rethmeier. (2011) Welding Residual Stresses Depending on Solid-State Transformation Behaviour Studied by Numerical and Experimental Methods. Materials Science Forum 681, pages 85-90.
Crossref
Crossref
René V. Martins & John A. Francis. (2011) Residual Stress, Texture, and Phase Investigation of Autogenous Edge Welds Using High Energy Synchrotron Radiation. Materials Science Forum 681, pages 43-48.
Crossref
Crossref
M. Farajian, Robert C. Wimpory & Th. Nitschke-Pagel. (2010) Relaxation and Stability of Welding Residual Stresses in High Strength Steel under Mechanical Loading. steel research international 81:12, pages 1137-1143.
Crossref
Crossref
J. A. Francis. 2010. In-situ Studies with Photons, Neutrons and Electrons Scattering. In-situ Studies with Photons, Neutrons and Electrons Scattering
159
174
.
R.J. Moat, D.J. Hughes, A. Steuwer, N. Iqbal, M. Preuss, S.E. Bray & M. Rawson. (2009) Residual Stresses in Inertia-Friction-Welded Dissimilar High-Strength Steels. Metallurgical and Materials Transactions A 40:9, pages 2098-2108.
Crossref
Crossref
J. A. Francis, H. J. Stone, S. Kundu, H. K. D. H. Bhadeshia, R. B. Rogge, P. J. Withers & L. Karlsson. (2009) The Effects of Filler Metal Transformation Temperature on Residual Stresses in a High Strength Steel Weld. Journal of Pressure Vessel Technology 131:4.
Crossref
Crossref
Nausheen Naz, Fawad Tariq & Rasheed Ahmed Baloch. (2009) Failure Analysis of HAZ Cracking in Low C–CrMoV Steel Weldment. Journal of Failure Analysis and Prevention 9:4, pages 370-379.
Crossref
Crossref
F. Vakili-Tah & A.H.D. Sorkhabi. (2009) Finite Element Analysis of Thickness Effect on the Residual Stress in Butt-Welded 2.25Cr1Mo Steel Plates. Journal of Applied Sciences 9:7, pages 1331-1337.
Crossref
Crossref
Thomas Kannengiesser & Arne Kromm. (2009) Formation of welding residual stresses in low transformation temperature (LTT) materials. Soldagem & Inspeção 14:1, pages 74-81.
Crossref
Crossref
Farid Vakili-Tah & Hamed Masumi-Asl. (2009) A Two-Dimensional Thermomechanical Analysis of Burn-Through at In-Service Welding of Pressurized Canals. Journal of Applied Sciences 9:4, pages 615-626.
Crossref
Crossref
H. Dai, J.A. Francis, H.J. Stone, H.K.D.H. Bhadeshia & P.J. Withers. (2008) Characterizing Phase Transformations and Their Effects on Ferritic Weld Residual Stresses with X-Rays and Neutrons. Metallurgical and Materials Transactions A 39:13, pages 3070-3078.
Crossref
Crossref
Dean Deng & Hidekazu Murakawa. (2008) Finite element analysis of temperature field, microstructure and residual stress in multi-pass butt-welded 2.25Cr–1Mo steel pipes. Computational Materials Science 43:4, pages 681-695.
Crossref
Crossref
Reza Heidarian, Mehdi Nourazar & Akbar ghanjkhanlo. (2022) Numerical Analysis of the Strength of Stainless Steel Tubes under Various Loading Conditions. SSRN Electronic Journal.
Crossref
Crossref