Welding residual stresses in ferritic power plant steels

References

• P. J. Withers and H. K. D. H. Bhadeshia: ‘Residual stress part 1 — measurement techniques’, Mater. Sci. Technot, 2001, 17, (4), 355–365.
   Web of Science ®Google Scholar
• P. J. Withers and H. K. D. H. Bhadeshia: ‘Residual stress part 2 — nature and origins’, Mater. Sci. Technot, 2001, 17, (4), 366–375.
   Web of Science ®Google Scholar
• D. Radaj: ‘Heat effects of welding — temperature field, residual stress, distortion’, 1-18; 1992, Berlin Heidelberg, Springer-Verlag.
   Google Scholar
• X. H. Cheng, J. W. Fisher, H. J. Prask, T. Gnaupel-Herold, B. T. Yen and S. Roy: ‘Residual stress modification by post-weld treatment and its beneficial effect on fatigue strength of welded structures’, Int. J. Fatig., 2003, 25, (9-11), 1259–1269.
   Web of Science ®Google Scholar
• W. Fricke: ‘Effects of residual stresses on the fatigue behaviour of welded steel structures’, Mater. Werkstofftechn., 2005, 36, (11), 642–649.
   Web of Science ®Google Scholar
• D. J. Hornbach and P. S. Prevey: ‘The effect of prior cold work on tensile residual stress development in nuclear weldments’, J. Press. Vessel Technot, 2002, 124, (3), 359–365.
   Web of Science ®Google Scholar
• D. P. G. Lidbury: ‘The significance of residual stresses in relation to the integrity of LWR pressure vessels’, Int. J. Press Vessels Piping, 1984, 17, (4), 197–328.
   Web of Science ®Google Scholar
• D. T. Read: ‘Measurement of applied j-integral produced by residual-stress’, Eng. Fract. Mech., 1989, 32, (1), 147–153.
   Web of Science ®Google Scholar
• M. Turski, A. H. Sherry, P. J. Bouchard and P. J. Withers: ‘Residual stress driven creep cracking in type 316 stainless steel’, J. Neutron Res., 2004, 12, (1-3), 45–49.
   Google Scholar
• P. J. Bouchard, P. J. Withers, S. A. McDonald and R. K. Heenan: ‘Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel’, Acta Mater., 2004, 52, (1), 23–34.
   Web of Science ®Google Scholar
• R. A. Ainsworth, J. K. Sharples and S. D. Smith: ‘Effects of residual stresses on fracture behaviour — experimental results and assessment methods’, J. Strain Anal. Eng. Design, 2000, 35, (4), 307–316.
   Web of Science ®Google Scholar
• R. A. Ainsworth: ‘125 procedures for assessing structural integrity of components under creep and creep-fatigue conditions’, Int. Mater. Rev., 2006, 51, (2), 107–126.
   Web of Science ®Google Scholar
• Y. Lei, N. P. O'Dowd and G. A. Webster: ‘Fracture mechanics analysis of a crack in a residual stress field’, Int. J. Fract., 2000, 106, (3), 195–216.
   Web of Science ®Google Scholar
• D. J. Smith, P. J. Bouchard and D. George: ‘Measurement and prediction of residual stresses in thick-section steel welds’, J. Strain Anal. Eng. Design, 2000, 35, (4), 287–305.
   Web of Science ®Google Scholar
• P. Duranton, J. Devaux, V. Robin, P. Gilles and J. M. Bergheau: ‘3D modelling of multipass welding of a 316L stainless steel pipe’, J. Mater. Process. Technol., 2004, 153-154, 457–463.
   Google Scholar
• C. D. Elcoate, R. J. Dennis, P. J. Bouchard and M. C. Smith: ‘Three dimensional multi-pass repair weld simulations’, Int. J. Press. Vessels Piping, 2005, 82, (4), 244–257.
   Web of Science ®Google Scholar
• R. Kohno and S. B. Jones: ‘An initial study of arc energy and thermal cycles in the submerged arc welding of steel’, Technical report 81/1978/PE, The Welding Institute, Abington, Cambridge, England, 1978.
   Google Scholar
• S. L. Mannan and K. Laha: ‘Creep behaviour of Cr—Mo steel weldments’, Trans. Ind. Inst. Met., 1996, 49, (4), 303–320.
   Web of Science ®Google Scholar
• J. A. Francis, W. Mazur and H. K. D. H. Bhadeshia: ‘Type IV cracking in ferritic power plant steels’, Mater. Sci. Technol, 2006, 22, (12), 1387–1395.
   Web of Science ®Google Scholar
• V. Karthik, K. V. Kasiviswanathan, K. Laha and B. Raj: ‘Determination of gradients in mechanical properties of 2.25Cr-1Mo weldments using shear-punch tests’, Weld J, 2002, 81, (12), 265S-272S.
   Google Scholar
• J. F. Lancaster: ‘Metallurgy of welding’, 6th edn, 211-309; 1999, Abington, Cambridge, Abington Publishing.
   Google Scholar
• R. K. Nanstad, D. E. McCabe, M. A. Sokolov, C. A. English and S. R. Ortner: ‘Comparison of effects of thermal aging, irradiation, and thermal annealing on the propensity for temper embrittlement on an RPV submerged-arc weld HAZ’, ORNL Letter report ORNL/NRC/LTR-01/07, Oak Ridge National Laboratory, December 2001.
   Google Scholar
• S. Issler, A. Klenk, A. A. Shibli and J. A. Williams: ‘Weld repair of ferritic welded materials for high temperature application’, Int. Mater. Rev., 2004, 49, (5), 299–324.
   Web of Science ®Google Scholar
• K. S. Kweon, J. H. Kim, J. H. Hong and C. H. Lee: ‘Microstructure and toughness of intercritically reheated heat affected zone in reactor pressure vessel steel weld’, Sci. Technol. Weld. Join., 2000, 5, (3), 161–167.
   Web of Science ®Google Scholar
• M. Hamada: ‘Control of strength and toughness at the heat affected zone’, Weld. Int., 2003, 17, (4), 265–270.
   Google Scholar
• G. M. Reddy, T. Mohandas and D. S. Sarma: ‘Cold cracking studies on low alloy steel weldments: effect of filler metal composition’, Sci. Technot Weld Join., 2003, 8, (6), 407–414.
   Web of Science ®Google Scholar
• J. Onoro: ‘Weld metal microstructure analysis of 9-12% Cr steels’, Int. J. Press. Vessels Piping, 2006, 83, 540–545.
   Web of Science ®Google Scholar
• A. C. Hunt, A. O. Kluken and G. R. Edwards: ‘Heat input and dilution effects in microalloyed steel weld metals’, Weld. 1, 1994, 73, (1), S9—S15.
   Google Scholar
• K. Easterling: ‘Introduction to the physical metallurgy of welding’, 2nd edn, 1-54; 1992, Oxford, Butterworth Heinemann.
   Google Scholar
• K. Suzuki, I. Kurihara, T. Sasaki, Y. Koyoma and Y. Tanaka: ‘Application of high strength MnMoNi steel to pressure vessels for nuclear power plant’, Nuclear Eng. Design, 2001; 206, 261–278.
   Web of Science ®Google Scholar
• H. K. D. H. Bhadeshia: ‘Steels — microstructure and properties’, 3rd edn; 2006, Oxford, Elsevier.
   Google Scholar
• J. S. Kirkaldy and D. Venugopalan: ‘Prediction of microstructure and hardenability in low alloy steels’, in ‘Phase transformations in ferrous alloys’, (eds. A. R. Marder and J. I. Goldstein), 125-148; 1984, New York, AIME.
   Google Scholar
• M. V. Li, D. V. Niebuhr, L. L. Meekisho and D. G. Atteridge: ‘A computational model for the prediction of steel hardenability’, Metall. Mater. Trans. B, 1998, 29B, (3), 661–672.
   Web of Science ®Google Scholar
• C. Zener: ‘Kinetics of the decomposition of austenite’, Trans. AIME, 1946, 167, 550–583.
   Google Scholar
• M. Hillert: ‘The role of interfacial energy during solid state phase transformations’, Jernkont. Ann., 1957, 141, 557–585.
   Google Scholar
• K. W. Andrews: J. Iron Steel Inst., 1969, 203, 721–727.
   Google Scholar
• J.-S. Kim, S.-H. Lee and T.-E. Jin: 'Fatigue evaluation of dissimilar welds on nuclear components', Proc. 17th Int. Conf. on ‘Structural mechanics in reactor technology’ (SMiRT 17), Prague, Czech Republic, August 2003, International Association for Structural Mechanics in Reactor Technology, Paper D03-2.
   Google Scholar
• J. B. Leblond and J. Devaux: ‘A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size’, Acta Metall., 1984, 32, (1), 137–146.
   Google Scholar
• H. K. D. H. Bhadeshia: ‘Developments in martensitic and bainitic steels: role of the shape deformation’, Mater. Sci. Eng. A, 2004, A378, (1-2), 34–39.
   Google Scholar
• J. B. Leblond, G. Mottet and J. C. Devaux: ‘A theoretical and numerical approach to the plastic behaviour of steels during phase transformations’, J. Mech. Phys. Solids, 1986, 34, (4), 395–409.
   Web of Science ®Google Scholar
• G. W. Greenwood and R. H. Johnson: Proc. Royal Soc., 1965, 238, 403–422.
   Google Scholar
• R. H. Johnson and G. W. Grenwood: Nature, 1962, 195, 138–139.
   Web of Science ®Google Scholar
• J. R. Patel and M. Cohen: Acta Metall., 1953, 1, 531–538.
   Google Scholar
• C. L. Magee: ‘Phase transformations’, (eds. V. F. Zackay and H. I. Aaronson), 115-156; 1970, Metals Park, OH, ASM.
   Google Scholar
• H. K. D. H. Bhadeshia, S. A. David, J. M. Vitek and R. W. Reed: ‘Stress induced transformation to bainite in Fe—Cr—Mo—C pressure vessel steel’, Mater. Sci. Technol, 1991,7, (8), 686–698.
   Web of Science ®Google Scholar
• P. H. Shipway and H. K. D. H. Bhadeshia: ‘The effect of small stresses on the kinetics of the bainite transformation’, Mater. Sci. Eng. A, 1995, A201, 143–149.
   Google Scholar
• A. Matsuzaki, H. K. D. H. Bhadeshia and H. Harada: Acta Metall Mater., 1994, 42, 1081–1090.
   Google Scholar
• N. Gey, B. Petit and M. Humbert: Metall. Mater. Trans. A, 2005, 36A, (12), 3291–3299.
   Web of Science ®Google Scholar
• S. Kundu and H. K. D. H. Bhadeshia: Scr. Mater., 2006, 55, 779–781.
   Web of Science ®Google Scholar
• H. K. D. H. Bhadeshia: ISIJ Int., 2002, 42, 1059–1060.
   Web of Science ®Google Scholar
• W. K. C. Jones and P. J. Alberry: in Terrific steels for fast reactor steam generators', 1-4; 1977, London, British Nuclear Engineering Society.
   Google Scholar
• W. K. C. Jones and P. J. Alberry: in ‘Residual stresses in welded constructions’, 1977, Cambridge, The Welding Institute.
   Google Scholar
• T. Nitschke-Pagel and H. Wohlfahrt: ‘Residual stresses in welded joints — sources and consequences’, Mater. Sci. Forum, 2002, 404-407, 215–224.
   Google Scholar
• P. J. Pouchard and P. J. Withers: ‘The appropriateness of residual stress length scales in structural integrity’, J. Neutr. Res., 2004, 12, (1-3), 81–91.
   Google Scholar
• A. Ohta, N. Suzuki, Y. Maeda, K. Hiraoka and T. Nakamura: ‘Superior fatigue crack growth properties in newly developed weld metal’, Int. J. Fatig., 1999, 21, S113—S118.
   Web of Science ®Google Scholar
• A. Ohta, K. Matsuoka, N. T. Nguyen, Y. Maeda and N. Suzuki: 'Fatigue strength improvement of lap joints of thin steel plate using low-transformation-temperature welding wire', Weld. I, 2003, 82, (4), 78S-83S.
   Google Scholar
• W. X. Wang, L. X. Huo, Y. F. Zhang, D. P. Wang and H. Y. Jing: ‘New developed welding electrode for improving the fatigue strength of welded joints’, J. Mater. Sci. Technol, 2002, 18, (6), 527–531.
   Web of Science ®Google Scholar
• J. W. H. Price, A. Paradowska, S. Joshi and T. Finlayson: ‘Residual stresses measurement by neutron diffraction and theoretical estimation in a single weld bead’, Int. J. Press. Vessels Piping, 2006, 83, 381–387.
   Web of Science ®Google Scholar
• S. T. Kimmins and D. J. Smith: J. Strain Anal., 1998, 33, (3), 195–206.
   Web of Science ®Google Scholar
• S. Hossain, C. E. Truman, D. J. Smith and M. R. Daymond: ‘Application of quenching to create highly triaxial residual stresses in type 316H stainless steels’, Int. J. Mech. Sci., 2006, 48, 235–243.
   Web of Science ®Google Scholar
• R. J. Dennis and N. A. Leggatt: ‘Optimisation of weld modelling techniques, bead-on-plate analysis’, Proc. ASME PVP2006, Vancouver, Canada, July 2006, ASME.
   Google Scholar
• J. Goldak, A. Chakravarti and M. Bibby: ‘A new finite-element model for welding heat-sources’, Metall. Trans. B, 1984, 15B, (2), 299–305.
   Web of Science ®Google Scholar
• J. K. Hong, C. L. Tsai and P. Dong: ‘Assessment of numerical procedures for residual stress analysis of multipass welds’, Weld J, 1998, 77, (9), 372S-382S.
   Google Scholar
• P. Dong and K. Hong: ‘Recommendations for determining residual stresses in fitness for service assessments’, WRC Bulletin 476, New York, November 2002.
   Google Scholar
• T. Zacharia, J. M. Vitek, J. A. Goldak, T. A. Debroy, M. Rappaz and H. K. D. H. Bhadeshia: ‘Modelling of fundamental phenomena in welds’, Model. Simul. Mater. Sci. Eng., 1995, 3, 265–288.
   Web of Science ®Google Scholar
• T. Debroy and S. A. David: ‘Physical processes in fusion welding’, Rev. Modern Phys., 1995, 67, (1), 85–112.
   Google Scholar
• S. Mishra and T. Debroy: ‘A genetic algorithm and gradient-descent-based neural network with the predictive power of a heat and fluid flow model for welding’, Weld. 1, 2006, 85, (11), 231s-242s.
   Google Scholar
• A. Kumar and T. Debroy: ‘Calculation of three-dimensional electromagnetic force field during arc welding’, J. Appl. Phys., 2003, 94, (2), 1267–1277.
   Web of Science ®Google Scholar
• S. A. David, S. S. Babu and J. M. Vitek: ‘Recent advances in modelling and characterisation of weld microstructures’, Sci. Technot Weld Join., 2001, 6, (6), 341–346.
   Web of Science ®Google Scholar
• D. F. Watt, L. Coon, M. Bibby, J. Goldak and C. Henwood: ‘An algorithm for modeling microstructural development in weld heat-affected zones: part A — reaction kinetics’, Acta Metall, 1988, 36, (11), 3029–3035.
   Google Scholar
• C. Henwood, M. Bibby, J. Goldak and D. Watt: ‘Coupled transient heat transfer-microstructure weld computations: part B’, Acta Metall, 1988, 36, (11), 3037–3046.
   Google Scholar
• L.-E. Lindgren: ‘Finite element modeling and simulation of welding part 2: improved material modeling’, J. Therm. Stress., 2001, 24, 195–231.
   Web of Science ®Google Scholar
• M. Preuss, J. Pang, P. J. Withers and G. J. Baxter: ‘Inertia welding nickel-based superalloy: metallurgical development’, Metall Mater. Trans. A, 2002, 33A, (10), 3215–3225.
   Web of Science ®Google Scholar
• M. Preuss, J. Pang, P. J. Withers and G. J. Baxter: ‘Inertia welding nickel-based superalloy: residual stress development’, Metall. Mater. Trans. A, 2002, 33A, (10), 3227–3234.
   Web of Science ®Google Scholar
• D. Deng and H. Murakawa: ‘Prediction of welding residual stress in multi-pass butt-welded modified 9Cr—lMo steel pipe considering phase transformation effects’, Comput. Mater. Sci, 2006, 37, 209–219.
   Web of Science ®Google Scholar