Advanced search
Publication Cover
Powder Metallurgy Volume 57, 2014 - Issue 3: Euromat 2013: Emerging technologies in powder metallurgy
Journal homepage
2,514
Views
127
CrossRef citations to date
0
Altmetric
Special Issue Articles

Mechanical properties of alloy Ti–6Al–4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures

A. MertensMetallic Materials Science UnitDepartment of Aerospace and Mechanics, Faculty of Applied Science, University of Liege (ULg), Chemin des Chevreuils, 1 B52/3, B4000Liège, BelgiumCorrespondence[email protected]
,
S. ReginsterMetallic Materials Science UnitDepartment of Aerospace and Mechanics, Faculty of Applied Science, University of Liege (ULg), Chemin des Chevreuils, 1 B52/3, B4000Liège, Belgium
,
H. PaydasMetallic Materials Science UnitDepartment of Aerospace and Mechanics, Faculty of Applied Science, University of Liege (ULg), Chemin des Chevreuils, 1 B52/3, B4000Liège, Belgium
,
Q. ContrepoisMetallic Materials Science UnitDepartment of Aerospace and Mechanics, Faculty of Applied Science, University of Liege (ULg), Chemin des Chevreuils, 1 B52/3, B4000Liège, Belgium
,
T. DormalSirris Research Centre (Liège), Rue Bois St-Jean, 12, B 4102 Seraing, Belgium
,
O. LemaireCRM GroupAvenue Bois St-Jean, 21, B 4000Liège, Belgium
&
J. Lecomte-BeckersMetallic Materials Science UnitDepartment of Aerospace and Mechanics, Faculty of Applied Science, University of Liege (ULg), Chemin des Chevreuils, 1 B52/3, B4000Liège, Belgium
 show all
Pages 184-189 | Received 05 Nov 2013, Accepted 19 Mar 2014, Published online: 15 Apr 2014

Citations (127)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (7)

Shi-Hao Li, Punit Kumar, Shubham Chandra & Upadrasta Ramamurty. (2023) Directed energy deposition of metals: processing, microstructures, and mechanical properties. International Materials Reviews 68:6, pages 605-647.
Read now
Yu Yin, Qiyang Tan, Michael Bermingham, Ning Mo, Jingqi Zhang & Ming-Xing Zhang. (2022) Laser additive manufacturing of steels. International Materials Reviews 67:5, pages 487-573.
Read now
Amit Bandyopadhyay, Yanning Zhang & Bonny Onuike. (2022) Additive manufacturing of bimetallic structures. Virtual and Physical Prototyping 17:2, pages 256-294.
Read now
Md Al-Amin, Ahmad Majdi Abdul Rani, Abdul Azeez Abdu Aliyu, Michael G Bryant, Mohd Danish & Azlan Ahmad. (2020) Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes 35:11, pages 1157-1180.
Read now
Pan Wang, Min Hao Goh, Qiang Li, Mui Ling Sharon Nai & Jun Wei. (2020) Effect of defects and specimen size with rectangular cross-section on the tensile properties of additively manufactured components. Virtual and Physical Prototyping 15:3, pages 251-264.
Read now
H. X. Li, H. L. Qi, C. H. Song, Y. L. Li & M. Yan. (2018) Selective laser melting of P20 mould steel: investigation on the resultant microstructure, high-temperature hardness and corrosion resistance. Powder Metallurgy 61:1, pages 21-27.
Read now
Alexey Domashenkov, András Borbély & Igor Smurov. (2017) Structural modifications of WC/Co nanophased and conventional powders processed by selective laser melting. Materials and Manufacturing Processes 32:1, pages 93-100.
Read now

Articles from other publishers (120)

Quan Dong, Meng Li, Xuejian Liu, Yufei Zhang & Jing Zhang. (2024) Microstructure, phase stability, and mechanical properties of (AlLiMg0.5Ti1.5)100-xScx lightweight high-entropy alloys. Intermetallics 164, pages 108089.
Crossref
Akshay Pathania, S Anand Kumar & BK Nagesha. (2023) Influence of post-heat treatment with super β transus temperature on the tensile behaviour of LPBF processed Ti6Al4V. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
A. Duchaussoy, M. Marteleur, P.J. Jacques & L. Choisez. (2023) Improved mechanical properties of β metastable Ti alloys processed by laser powder bed fusion. Materials Science and Engineering: A 887, pages 145755.
Crossref
Jenő Gubicza, Megumi Kawasaki, Zoltán Dankházi, Márk Windisch & Moustafa El-Tahawy. (2023) X-ray line profile analysis study on the evolution of the microstructure in additively manufactured 316L steel during severe plastic deformation. Journal of Materials Science.
Crossref
Tatiana Mishurova, Sergei Evsevleev, Pierre Piault, Andrew King, Laura Henry & Giovanni Bruno. (2023) Understanding the hot isostatic pressing effectiveness of laser powder bed fusion Ti-6Al-4V by in-situ X-ray imaging and diffraction experiments. Scientific Reports 13:1.
Crossref
Israt Zarin Era, Mojtaba A. Farahani, Thorsten Wuest & Zhichao Liu. (2023) Machine learning in Directed Energy Deposition (DED) additive manufacturing: A state-of-the-art review. Manufacturing Letters 35, pages 689-700.
Crossref
J.R.O. Leo, S. Zabeen, M.E. Fitzpatrick, J. Zou & M.M. Attallah. (2023) A study on the effects of laser shock peening on the microstructure and substructure of Ti–6Al–4V manufactured by Selective Laser Melting. Journal of Materials Processing Technology 316, pages 117959.
Crossref
Paweł BIAŁOBRZEWSKI, Judyta SIENKIEWICZ, Jacek JANISZEWSKI & Janusz KLUCZYŃSKI. (2023) Dynamic Behaviour of Selective Laser Melted 316L Steel - Mechanical Properties and Microstructure Changes. Problems of Mechatronics Armament Aviation Safety Engineering 14:2, pages 51-72.
Crossref
Michaela Zeißig & Frank Jablonski. (2023) Numerical Investigation of Production-Related Characteristics Regarding their Influence on the Fatigue Strength of Additively Manufactured Components. Acta Mechanica et Automatica 17:2, pages 288-291.
Crossref
Chuanbin Du, Yanhua Zhao, Jingchao Jiang, Qian Wang, Haijin Wang, Nan Li & Jie Sun. (2023) Pore defects in Laser Powder Bed Fusion: Formation mechanism, control method, and perspectives. Journal of Alloys and Compounds 944, pages 169215.
Crossref
Dovgyy Bogdan & Minh‐Son Pham. 2023. Additive Manufacturing Technology. Additive Manufacturing Technology 131 153 .
Dovgyy Bogdan & Minh‐Son Pham. 2023. Additive Manufacturing Technology. Additive Manufacturing Technology 93 130 .
Pietro Magarò, Gianluca Alaimo, Massimo Carraturo, Emanuele Sgambitterra & Carmine Maletta. (2023) A novel methodology for the prediction of the stress–strain response of laser powder bed fusion lattice structure based on a multi-scale approach. Materials Science and Engineering: A 863, pages 144526.
Crossref
Zhifu Yao, Xue Jia, Jinxin Yu, Mujin Yang, Chao Huang, Zhijie Yang, Cuiping Wang, Tao Yang, Shuai Wang, Rongpei Shi, Jun Wei & Xingjun Liu. (2023) Rapid accomplishment of strength/ductility synergy for additively manufactured Ti-6Al-4V facilitated by machine learning. Materials & Design 225, pages 111559.
Crossref
Natalia B. Ghisi C, Hend Alqaydi, Nujood Alshehhi, Nesma T. Aboulkhair & Amal M.K. Esawi. 2023. Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing. Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing 405 429 .
Muhammad Waqas, Dingyong He, Yude Liu, Saleem Riaz & Farkhanda Afzal. (2022) Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Fabricated by Selective Laser Melting. Journal of Materials Engineering and Performance 32:2, pages 680-694.
Crossref
J. Richter, M. Vollmer, G. Bartzsch, S. Scherbring, O. Volkova, J. Mola & T. Niendorf. (2022) Novel austenitic Cr-Mn-Ni TWIP-steel with superior strength enabled by laser powder bed fusion – On the role of substrate temperatures. Additive Manufacturing Letters 3, pages 100065.
Crossref
Sulaymon Eshkabilov, Ismat Ara & Fardad Azarmi. (2022) A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel. The International Journal of Advanced Manufacturing Technology 123:7-8, pages 2733-2756.
Crossref
Einat Strumza, Peri Landau, Giora Kimmel, Yaron I. Ganor, Ori Yeheskel & Shmuel Hayun. (2022) Thermophysical properties of Ti-6Al-4V fabricated by powder bed fusion methods. Additive Manufacturing 58, pages 103045.
Crossref
Fan Yang, Daigen Zhu, Menglei Jiang, Hui Liu, Shiri Guo, Qingyan Wang, Hui Wang, Kai Zhang, Aijun Huang & Juan Hou. (2022) Effect of Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of Selective Laser Melted 304L Stainless Steel. Acta Metallurgica Sinica (English Letters) 35:10, pages 1688-1702.
Crossref
J.J. Rindler, C.E. Slone, E.D. Herderick, M.J. Mills & A.J. Ramirez. (2022) Investigation on the potential effects of laser stitching and subsequent heat treatment on the microstructure and mechanical properties of Nickel Alloy 718 produced via Laser Powder Bed Fusion (L-PBF). Additive Manufacturing 57, pages 102906.
Crossref
Claudio Tosto, Jacopo Tirillò, Fabrizio Sarasini, Claudia Sergi & Gianluca Cicala. (2022) Fused Deposition Modeling Parameter Optimization for Cost-Effective Metal Part Printing. Polymers 14:16, pages 3264.
Crossref
W.W. Deng, H.F. Lu, Y.H. Xing, K.Y. Luo & J.Z. Lu. (2022) Effect of laser shock peening on tensile properties and microstructure of selective laser melted 316L stainless steel with different build directions. Materials Science and Engineering: A 850, pages 143567.
Crossref
Shoujin Sun, Duyao Zhang, Suresh Palanisamy, Qianchu Liu & Matthew S. Dargusch. (2022) Mechanical properties and deformation mechanisms of martensitic Ti6Al4V alloy processed by laser powder bed fusion and water quenching. Materials Science and Engineering: A 839, pages 142817.
Crossref
Emanuele Ghio & Emanuela Cerri. (2022) Additive Manufacturing of AlSi10Mg and Ti6Al4V Lightweight Alloys via Laser Powder Bed Fusion: A Review of Heat Treatments Effects. Materials 15:6, pages 2047.
Crossref
Antriksh Sharma, Jie Chen, Evan Diewald, Anahita Imanian, Jack Beuth & Yongming Liu. (2022) Data-Driven Sensitivity Analysis for Static Mechanical Properties of Additively Manufactured Ti–6Al–4V. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering 8:1.
Crossref
N. Ahmed, I. Barsoum, G. Haidemenopoulos & R.K. Abu Al-Rub. (2022) Process parameter selection and optimization of laser powder bed fusion for 316L stainless steel: A review. Journal of Manufacturing Processes 75, pages 415-434.
Crossref
Erfan Maleki, Sara Bagherifard & Mario Guagliano. (2021) Application of artificial intelligence to optimize the process parameters effects on tensile properties of Ti-6Al-4V fabricated by laser powder-bed fusion. International Journal of Mechanics and Materials in Design 18:1, pages 199-222.
Crossref
Dawei Wang, Huili Han, Bo Sa, Kelin Li, Jujie Yan, Jiazhen Zhang, Jianguang Liu, Zhengdi He, Ning Wang & Ming Yan. (2022) A review and a statistical analysis of porosity in metals additively manufactured by laser powder bed fusion. Opto-Electronic Advances 5:10, pages 210058-210058.
Crossref
Kh. Moeinfar, F. Khodabakhshi, S.F. Kashani-bozorg, M. Mohammadi & A.P. Gerlich. (2022) A review on metallurgical aspects of laser additive manufacturing (LAM): Stainless steels, nickel superalloys, and titanium alloys. Journal of Materials Research and Technology 16, pages 1029-1068.
Crossref
Ismat Ara, Fardad Azarmi & X. W. Tangpong. (2021) Microstructure Analysis of High-Density 316L Stainless Steel Manufactured by Selective Laser Melting Process. Metallography, Microstructure, and Analysis 10:6, pages 754-767.
Crossref
John Slotwinski, Christine Martin & Terrence Johnson. (2021) A Survey of Mechanical Property Variability of Additively Manufactured Metals. Journal of Testing and Evaluation 49:6, pages 20200461.
Crossref
Abdulaziz Kurdi & A.K. Basak. (2021) Micro-mechanical behaviour of selective laser melted Ti6Al4V under compression. Materials Science and Engineering: A 826, pages 141975.
Crossref
Peyman Ansari, Asif Ur Rehman, Fatih Pitir, Salih Veziroglu, Yogendra Kumar Mishra, Oral Cenk Aktas & Metin U. Salamci. (2021) Selective Laser Melting of 316L Austenitic Stainless Steel: Detailed Process Understanding Using Multiphysics Simulation and Experimentation. Metals 11:7, pages 1076.
Crossref
Qi Chao, Sebastian Thomas, Nick Birbilis, Pavel Cizek, Peter D. Hodgson & Daniel Fabijanic. (2021) The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel. Materials Science and Engineering: A 821, pages 141611.
Crossref
Partha Sarathi Ghosh, Abhishek Sen, Somnath Chattopadhyaya, Shubham Sharma, Jujhar Singh, Shashi Parkash Dwivedi, Ambuj Saxena, Aqib Mashood Khan, Danil Yurievich Pimenov & Khaled Giasin. (2021) Prediction of Transient Temperature Distributions for Laser Welding of Dissimilar Metals. Applied Sciences 11:13, pages 5829.
Crossref
Magdalena Łępicka, Yurii Tsybrii, Daniel Kiejko & Karol Golak. (2021) The Effect of TiN and DLC Anti-Wear Coatings on the Tribofilm Formation and Frictional Heat Phenomena in Coated Metals vs. WC-Co. Materials 14:12, pages 3342.
Crossref
Yude Liu, Meng Zhang, Wentian Shi, Yingyi Ma & Jin Yang. (2021) Study on performance optimization of 316L stainless steel parts by High-Efficiency Selective Laser Melting. Optics & Laser Technology 138, pages 106872.
Crossref
Seifallah Fetni, Tommaso Maurizi Enrici, Tobia Niccolini, Hoang Son Tran, Olivier Dedry, Laurent Duchêne, Anne Mertens & Anne Marie Habraken. (2021) Thermal model for the directed energy deposition of composite coatings of 316L stainless steel enriched with tungsten carbides. Materials & Design 204, pages 109661.
Crossref
Katharina Bartsch, Dirk Herzog, Bastian Bossen & Claus Emmelmann. (2021) Material modeling of Ti–6Al–4V alloy processed by laser powder bed fusion for application in macro-scale process simulation. Materials Science and Engineering: A 814, pages 141237.
Crossref
Alireza Dareh Baghi, Shahrooz Nafisi, Reza Hashemi, Heike Ebendorff-Heidepriem & Reza Ghomashchi. (2021) Experimental realisation of build orientation effects on the mechanical properties of truly as-built Ti-6Al-4V SLM parts. Journal of Manufacturing Processes 64, pages 140-152.
Crossref
Cole Britt, Colt J. Montgomery, Michael J. Brand, Zi-Kui Liu, John S. Carpenter & Allison M. Beese. (2021) Effect of processing parameters and strut dimensions on the microstructures and hardness of stainless steel 316L lattice-emulating structures made by powder bed fusion. Additive Manufacturing 40, pages 101943.
Crossref
N. V. Kazantseva, P. V. Krakhmalev, I. A. Yadroitsava & I. A. Yadroitsev. (2021) Laser Additive 3D Printing of Titanium Alloys: Current Status, Problems, Trends. Physics of Metals and Metallography 122:1, pages 6-25.
Crossref
E. Langi, L. G. Zhao, P. Jamshidi, M. M. Attallah, V. V. Silberschmidt, H. Willcock & F. Vogt. (2021) Microstructural and Mechanical Characterization of Thin-Walled Tube Manufactured with Selective Laser Melting for Stent Application. Journal of Materials Engineering and Performance 30:1, pages 696-710.
Crossref
Zackary Snow, Abdalla R. Nassar & Edward W. Reutzel. (2020) Invited Review Article: Review of the formation and impact of flaws in powder bed fusion additive manufacturing. Additive Manufacturing 36, pages 101457.
Crossref
L. Wiesent, U. Schultheiß, P. Lulla, A. Nonn & U. Noster. (2020) Mechanical properties of small structures built by selective laser melting 316 L stainless steel – a phenomenological approach to improve component design. Materialwissenschaft und Werkstofftechnik 51:12, pages 1615-1629.
Crossref
Ivan Erdakov, Lev Glebov, Kirill Pashkeev, Vitaly Bykov, Anastasia Bryk, Vyacheslav Lezin & Liudmila Radionova. (2020) Effect of the Ti6Al4V Alloy Track Trajectories on Mechanical Properties in Direct Metal Deposition. Machines 8:4, pages 79.
Crossref
Vincent Benoist, Lionel Arnaud & Maher Baili. (2020) A new method of design for additive manufacturing including machining constraints. The International Journal of Advanced Manufacturing Technology 111:1-2, pages 25-36.
Crossref
Hossein Eskandari Sabzi & Pedro E.J. Rivera-Díaz-del-Castillo. (2020) Composition and process parameter dependence of yield strength in laser powder bed fusion alloys. Materials & Design 195, pages 109024.
Crossref
Kun Sun, Wenli Xiang, Yuan Xu & Xinzhu Shu. (2020) Softening Behavior and Mechanism of Laser Rapid Forming Ti-6Al-4V Alloy Deformed at the High Temperature. Journal of Physics: Conference Series 1637:1, pages 012019.
Crossref
H. Wang, Z.G. Zhu, H. Chen, A.G. Wang, J.Q. Liu, H.W. Liu, R.K. Zheng, S.M.L. Nai, S. Primig, S.S. Babu, S.P. Ringer & X.Z. Liao. (2020) Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting. Acta Materialia 196, pages 609-625.
Crossref
Sheng Huang, Swee Leong Sing, Geoff de Looze, Robert Wilson & Wai Yee Yeong. (2020) Laser powder bed fusion of titanium-tantalum alloys: Compositions and designs for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials 108, pages 103775.
Crossref
Muhammad Qasim Zafar, Chao Chao Wu, Haiyan Zhao, Jinnan Wang & Xingjian Hu. (2020) Finite element framework for electron beam melting process simulation. The International Journal of Advanced Manufacturing Technology 109:7-8, pages 2095-2112.
Crossref
Soumya Sridar, Yunhao Zhao, Kun Li, Xin Wang & Wei Xiong. (2020) Post-heat treatment design for high-strength low-alloy steels processed by laser powder bed fusion. Materials Science and Engineering: A 788, pages 139531.
Crossref
Pranjal Chauhan, Sushil Yebaji, Vijay N. Nadakuduru & T. Shanmugasundaram. (2020) Development of a novel light weight Al35Cr14Mg6Ti35V10 high entropy alloy using mechanical alloying and spark plasma sintering. Journal of Alloys and Compounds 820, pages 153367.
Crossref
P. Agrawal, S. Thapliyal, S.S. Nene, R.S. Mishra, B.A. McWilliams & K.C. Cho. (2020) Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing. Additive Manufacturing 32, pages 101098.
Crossref
Le Zai, Chaoqun Zhang, Yiqiang Wang, Wei Guo, Daniel Wellmann, Xin Tong & Yingtao Tian. (2020) Laser Powder Bed Fusion of Precipitation-Hardened Martensitic Stainless Steels: A Review. Metals 10:2, pages 255.
Crossref
Seifallah Fetni, Tommaso Maurizi Enrici, Tobia Niccolini, Son Hoang Tran, Olivier Dedry, Ruben Jardin, Laurent Duchêne, Anne Mertens & Anne Marie Habraken. (2020) 2D thermal finite element analysis of laser cladding of 316L+WC Composite coatings. Procedia Manufacturing 50, pages 86-92.
Crossref
Richard Gumbleton, Jerome A. Cuenca, Georgina M. Klemencic, Nick Jones & Adrian Porch. (2019) Evaluating the coefficient of thermal expansion of additive manufactured AlSi10Mg using microwave techniques. Additive Manufacturing 30, pages 100841.
Crossref
Mingji Huang, Zongxin Zhang & Ping Chen. (2019) Effect of selective laser melting process parameters on microstructure and mechanical properties of 316L stainless steel helical micro-diameter spring. The International Journal of Advanced Manufacturing Technology 104:5-8, pages 2117-2131.
Crossref
Kaiwen Wei, Xiaoyan Zeng, Gao Huang, Jinfeng Deng & Mengna Liu. (2019) Selective laser melting of Ti-5Al-2.5Sn alloy with isotropic tensile properties: The combined effect of densification state, microstructural morphology, and crystallographic orientation characteristics. Journal of Materials Processing Technology 271, pages 368-376.
Crossref
Zan Li, Thomas Voisin, Joseph T. McKeown, Jianchao Ye, Tom Braun, Chandrika Kamath, Wayne E. King & Y. Morris Wang. (2019) Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels. International Journal of Plasticity 120, pages 395-410.
Crossref
Jin Myoung Jeon, Jeong Min Park, Ji-Hun Yu, Jung Gi Kim, Yujin Seong, Sun Hong Park & Hyoung Seop Kim. (2019) Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel. Materials Science and Engineering: A 763, pages 138152.
Crossref
Xiaolei Xing, Guangkuo Qin, Yefei Zhou, Hui Yu, Ligang Liu, Lijie Zhang & Qingxiang Yang. (2019) Microstructure Optimization and Cracking Control of Additive Manufactured Bainite Steel by Gas Metal Arc Welding Technology. Journal of Materials Engineering and Performance 28:8, pages 5138-5145.
Crossref
A. E. Wilson-Heid, T. C. Novak & A. M. Beese. (2018) Characterization of the Effects of Internal Pores on Tensile Properties of Additively Manufactured Austenitic Stainless Steel 316L. Experimental Mechanics 59:6, pages 793-804.
Crossref
Hassanen Jaber & Tunde Kovacs. (2019) Selective laser melting of Ti alloys and hydroxyapatite for tissue engineering: progress and challenges. Materials Research Express 6:8, pages 082003.
Crossref
Zhixin Zhan, Hua Li & K.Y. Lam. (2019) Development of a novel fatigue damage model with AM effects for life prediction of commonly-used alloys in aerospace. International Journal of Mechanical Sciences 155, pages 110-124.
Crossref
Javed Akram, Deepankar Pal & Brent Stucker. (2019) Establishing Flow Stress and Elongation Relationships as a Function of Microstructural Features of Ti6Al4V Alloy Processed using SLM. Designs 3:2, pages 21.
Crossref
Amir Mahyar Khorasani, Ian Gibson, Alireza Ghaderi & Mazher Iqbal Mohammed. (2018) Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts. The International Journal of Advanced Manufacturing Technology 101:9-12, pages 3183-3197.
Crossref
Aleksandra Szafrańska, Anna Antolak-Dudka, Paweł Baranowski, Paweł Bogusz, Dariusz Zasada, Jerzy Małachowski & Tomasz Czujko. (2019) Identification of Mechanical Properties for Titanium Alloy Ti-6Al-4V Produced Using LENS Technology. Materials 12:6, pages 886.
Crossref
AmirMahyar Khorasani, Ian Gibson, Umar Shafique Awan & Alireza Ghaderi. (2019) The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V. Additive Manufacturing 25, pages 176-186.
Crossref
Jeong Min Park, Jin Myoung Jeon, Jung Gi Kim, Yujin Seong, Sun Hong Park & Hyoung Seop Kim. (2018) Effect of Porosity on Mechanical Anisotropy of 316L Austenitic Stainless Steel Additively Manufactured by Selective Laser Melting. Journal of Korean Powder Metallurgy Institute 25:6, pages 475-481.
Crossref
N. Kazantseva, P. Krakhmalev, M. Thuvander, I. Yadroitsev, N. Vinogradova & I. Ezhov. (2018) Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D Printing. Materials Characterization 146, pages 101-112.
Crossref
Thomas Voisin, Nicholas P. Calta, Saad A. Khairallah, Jean-Baptiste Forien, Levente Balogh, Ross W. Cunningham, Anthony D. Rollett & Y. Morris Wang. (2018) Defects-dictated tensile properties of selective laser melted Ti-6Al-4V. Materials & Design 158, pages 113-126.
Crossref
Behzad Fotovvati, Navid Namdari & Amir Dehghanghadikolaei. (2018) Fatigue performance of selective laser melted Ti6Al4V components: state of the art. Materials Research Express 6:1, pages 012002.
Crossref
Justin Mezzetta, Joon-Phil Choi, Jason Milligan, Jason Danovitch, Nejib Chekir, Alexandre Bois-Brochu, Yaoyao Fiona Zhao & Mathieu Brochu. (2018) Microstructure-Properties Relationships of Ti-6Al-4V Parts Fabricated by Selective Laser Melting. International Journal of Precision Engineering and Manufacturing-Green Technology 5:5, pages 605-612.
Crossref
Alexander Leicht, Uta Klement & Eduard Hryha. (2018) Effect of build geometry on the microstructural development of 316L parts produced by additive manufacturing. Materials Characterization 143, pages 137-143.
Crossref
Pan Tao, Huai-xue Li, Bai-ying Huang, Quan-dong Hu, Shui-li Gong & Qing-yan Xu. (2018) Tensile behavior of Ti-6Al-4V alloy fabricated by selective laser melting: effects of microstructures and as-built surface quality. China Foundry 15:4, pages 243-252.
Crossref
Yusuf Kaynak & Ozhan Kitay. (2018) Porosity, Surface Quality, Microhardness and Microstructure of Selective Laser Melted 316L Stainless Steel Resulting from Finish Machining. Journal of Manufacturing and Materials Processing 2:2, pages 36.
Crossref
Chengcheng Wang, Xipeng Tan, Erjia Liu & Shu Beng Tor. (2018) Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting. Materials & Design 147, pages 157-166.
Crossref
Jinguo Ge, Jian Lin, Yan Chen, Yongping Lei & Hanguang Fu. (2018) Characterization of wire arc additive manufacturing 2Cr13 part: Process stability, microstructural evolution, and tensile properties. Journal of Alloys and Compounds 748, pages 911-921.
Crossref
Maria Doubenskaia, Alexey Domashenkov, Igor Smurov & Pavel Petrovskiy. (2018) Study of Selective Laser Melting of intermetallic TiAl powder using integral analysis. International Journal of Machine Tools and Manufacture 129, pages 1-14.
Crossref
O. Fergani, A. Bratli Wold, F. Berto, V. Brotan & M. Bambach. (2018) Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting. Fatigue & Fracture of Engineering Materials & Structures 41:5, pages 1102-1119.
Crossref
Duyao Zhang, Shoujin Sun, Dong Qiu, Mark A. Gibson, Matthew S. Dargusch, Milan Brandt, Ma Qian & Mark Easton. (2018) Metal Alloys for Fusion‐Based Additive Manufacturing. Advanced Engineering Materials 20:5.
Crossref
T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De & W. Zhang. (2018) Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92, pages 112-224.
Crossref
Dylan Agius, Kyriakos Kourousis & Chris Wallbrink. (2018) A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs. Metals 8:1, pages 75.
Crossref
Christian Schulze, Markus Weinmann, Christoph Schweigel, Olaf Keßler & Rainer Bader. (2018) Mechanical Properties of a Newly Additive Manufactured Implant Material Based on Ti-42Nb. Materials 11:1, pages 124.
Crossref
Y. Morris Wang, Thomas Voisin, Joseph T. McKeown, Jianchao Ye, Nicholas P. Calta, Zan Li, Zhi Zeng, Yin Zhang, Wen Chen, Tien Tran Roehling, Ryan T. Ott, Melissa K. Santala, Philip J. Depond, Manyalibo J. Matthews, Alex V. Hamza & Ting Zhu. (2017) Additively manufactured hierarchical stainless steels with high strength and ductility. Nature Materials 17:1, pages 63-71.
Crossref
Kim Vanmeensel, Karel Lietaert, Bey Vrancken, Sasan Dadbakhsh, Xiaopeng Li, Jean-Pierre Kruth, Pavel Krakhmalev, Igor Yadroitsev & Jan Van Humbeeck. 2018. Additive Manufacturing. Additive Manufacturing 261 309 .
Allison M. Beese. 2018. Thermo-Mechanical Modeling of Additive Manufacturing. Thermo-Mechanical Modeling of Additive Manufacturing 81 92 .
A. V. Dub, V. V. Beregovsky, E. V. Tretyakov, S. A. Schurenkova & A. V. Yudin. 2018. Proceedings of the Scientific-Practical Conference "Research and Development - 2016". Proceedings of the Scientific-Practical Conference "Research and Development - 2016" 329 340 .
Z. Brytan. (2017) Comparison of Vacuum Sintered and Selective Laser Melted Steel AISI 316L. Archives of Metallurgy and Materials 62:4, pages 2125-2131.
Crossref
Alexander E. Wilson-Heid, Zhuqing Wang, Brenna McCornac & Allison M. Beese. (2017) Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V. Materials Science and Engineering: A 706, pages 287-294.
Crossref
M.L. Pace, A. Guarnaccio, P. Dolce, D. Mollica, G.P. Parisi, A. Lettino, L. Medici, V. Summa, R. Ciancio & A. Santagata. (2017) 3D additive manufactured 316L components microstructural features and changes induced by working life cycles. Applied Surface Science 418, pages 437-445.
Crossref
Shuo Wang, Yude Liu, Wentian Shi, Bin Qi, Jin Yang, Feifei Zhang, Dong Han & Yingyi Ma. (2017) Research on High Layer Thickness Fabricated of 316L by Selective Laser Melting. Materials 10:9, pages 1055.
Crossref
Jianfeng Sun, Zhou Yang, Yongqiang Yang & Di Wang. (2017) Research on the microstructure and properties of the overhanging structure formed by selective laser melting. Rapid Prototyping Journal 23:5, pages 904-910.
Crossref
H.-S. Tran, J.T. Tchuindjang, H. Paydas, A. Mertens, R.T. Jardin, L. Duch?ne, R. Carrus, J. Lecomte-Beckers & A.M. Habraken. (2017) 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials & Design 128, pages 130-142.
Crossref
A. A. Popovich, V. Sh. Sufiiarov, E. V. Borisov, I. A. Polozov, D. V. Masaylo & A. V. Grigoriev. (2017) Anisotropy of mechanical properties of products manufactured using selective laser melting of powdered materials. Russian Journal of Non-Ferrous Metals 58:4, pages 389-395.
Crossref
Xiang-Yu Zhang, Gang Fang & Jie Zhou. (2017) Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review. Materials 10:1, pages 50.
Crossref
Xuezhi Shi, Shuyuan Ma, Changmeng Liu, Qianru Wu, Jiping Lu, Yude Liu & Wentian Shi. (2017) Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy: Microstructure and mechanical properties. Materials Science and Engineering: A 684, pages 196-204.
Crossref
S. Sun, M. Brandt & M. Easton. 2017. Laser Additive Manufacturing. Laser Additive Manufacturing 55 77 .
Xuezhi Shi, Shuyuan Ma, Changmeng Liu, Cheng Chen, Qianru Wu, Xianping Chen & Jiping Lu. (2016) Performance of High Layer Thickness in Selective Laser Melting of Ti6Al4V. Materials 9:12, pages 975.
Crossref
Michaela Fousová, Dalibor Vojtěch & Jaroslav Fojt. (2016) Microscopic Evaluation of 3D-Printed Materials Surface and Characteristic Microstructure. Manufacturing Technology 16:5, pages 902-909.
Crossref
Dirk Herzog, Vanessa Seyda, Eric Wycisk & Claus Emmelmann. (2016) Additive manufacturing of metals. Acta Materialia 117, pages 371-392.
Crossref
Michaela Fousová, Dalibor Vojtěch & Jiří Kubásek. (2016) Titanium Alloy Ti-6Al-4V Prepared by Selective Laser Melting (SLM). Manufacturing Technology 16:4, pages 691-697.
Crossref
R. Casati, J. Lemke & M. Vedani. (2016) Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting. Journal of Materials Science & Technology 32:8, pages 738-744.
Crossref
John J. LewandowskiMohsen Seifi. (2016) Metal Additive Manufacturing: A Review of Mechanical Properties. Annual Review of Materials Research 46:1, pages 151-186.
Crossref
Zhuqing Wang, Todd A. Palmer & Allison M. Beese. (2016) Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing. Acta Materialia 110, pages 226-235.
Crossref
Allison M. Beese & Beth E. Carroll. (2015) Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock. JOM 68:3, pages 724-734.
Crossref
P. Krakhmalev, G. Fredriksson, I. Yadroitsava, N. Kazantseva, A. du Plessis & I. Yadroitsev. (2016) Deformation Behavior and Microstructure of Ti6Al4V Manufactured by SLM. Physics Procedia 83, pages 778-788.
Crossref
Ming-Wei Wu, Pang-Hsin Lai & Jhewn-Kuang Chen. (2016) Anisotropy in the impact toughness of selective laser melted Ti–6Al–4V alloy. Materials Science and Engineering: A 650, pages 295-299.
Crossref
H. Paydas, A. Mertens, R. Carrus, J. Lecomte-Beckers & J. Tchoufang Tchuindjang. (2015) Laser cladding as repair technology for Ti?6Al?4V alloy: Influence of building strategy on microstructure and hardness. Materials & Design 85, pages 497-510.
Crossref
Scott M. Thompson, Zachary S. Aspin, Nima Shamsaei, Alaa Elwany & Linkan Bian. (2015) Additive manufacturing of heat exchangers: A case study on a multi-layered Ti–6Al–4V oscillating heat pipe. Additive Manufacturing 8, pages 163-174.
Crossref
Qingsong Wei, Shuai Li, Changjun Han, Wei Li, Lingyu Cheng, Liang Hao & Yusheng Shi. (2015) Selective laser melting of stainless-steel/nano-hydroxyapatite composites for medical applications: Microstructure, element distribution, crack and mechanical properties. Journal of Materials Processing Technology 222, pages 444-453.
Crossref
Bo Song, Xiao Zhao, Shuai Li, Changjun Han, Qingsong Wei, Shifeng Wen, Jie Liu & Yusheng Shi. (2015) Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review. Frontiers of Mechanical Engineering 10:2, pages 111-125.
Crossref
Pang-Hsin Lai, Jhewn-Kuang Chen & Ming-Wei Wu. (2015) The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting. MATEC Web of Conferences 27, pages 02010.
Crossref
John Romano, Leila Ladani & Magda Sadowski. (2015) Thermal Modeling of Laser Based Additive Manufacturing Processes within Common Materials. Procedia Manufacturing 1, pages 238-250.
Crossref
Pietro Magaro'Gianluca Alaimo, Massimo Carraturo, Emanuele Sgambitterra & Carmine Maletta. (2022) A Novel Methodology for the Prediction of the Stress-Stain Response of Laser Powder Bed Fusion Lattice Structure Based on a Multi-Scale Approach. SSRN Electronic Journal.
Crossref
shmuel Hayun, Einat Strumza, Peri Landau, Giora Kimmel, Yaron I. Ganor & Ori Yeheskel. (2022) Thermophysical Properties of Ti-6al-4v Fabricated by Powder Bed Fusion Methods. SSRN Electronic Journal.
Crossref
shmuel Hayun, Einat Strumza, Peri Landau, Giora Kimmel, Yaron I. Ganor & Ori Yeheskel. (2022) Thermophysical Properties of Ti-6al-4v Fabricated by Powder Bed Fusion Methods. SSRN Electronic Journal.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.