Citations (22)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Gaurav D. Sonawane & Vikas G. Sargade. (2022) Performance evaluation of HiPIMS, S3p and CAE deposited coatings during dry turning of Dss2205. Machining Science and Technology 26:3, pages 396-427.
Read now
Read now
J. Y. Yi, K. H. Chen, Y. C. Xu & C. J. Zhu. (2019) Performance of AlTiBN and AlTiTaN coatings during milling of titanium. Surface Engineering 35:6, pages 501-506.
Read now
Read now
Atul Prabhakar Kulkarni & Vikas G. Sargade. (2015) Characterization and Performance of AlTiN, AlTiCrN, TiN/TiAlN PVD Coated Carbide Tools While Turning SS 304. Materials and Manufacturing Processes 30:6, pages 748-755.
Read now
Read now
R. K. Upadhyay & L. A. Kumaraswamidhas. (2015) Investigation of monolayer–multilayer PVD nitride coating. Surface Engineering 31:2, pages 123-133.
Read now
Read now
A. H. Liu & J. X. Deng. (2015) Elevated temperature tribological properties of AlTiN coating up to 700°C. Surface Engineering 31:1, pages 17-23.
Read now
Read now
Articles from other publishers (17)
S S Rajput, C Upadhyay, S Gangopadhyay & F Fernandes. (2023) Effects of roughing, finishing, and aggressive machining conditions on the milling performance of AISI 1045 steel using TiAlN coated inserts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pages 095440542311579.
Crossref
Crossref
Mustafa Günay. (2022) Modeling and multiple optimization in face milling of hardfacing welding applied steel: Force, roughness, power. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:12, pages 6652-6664.
Crossref
Crossref
Li Hua, Luo Yang, Han Mingyue, Tang Ling, Gu Jiabin, Li Guodong, Deng Dachen, Liu Hongtao, Huang Kai & Li Liuhe. (2022) Effect of geometric position on the film properties for a complex-shaped substrate in HiPIMS discharge: Experiment and simulation. Surface and Coatings Technology 434, pages 128196.
Crossref
Crossref
Wenzheng Li, Zhiwei Yuan, Yebiao Zhu, Wuming Guo, Yongxin Wang, Haixin Wang & Jinlong Li. (2021) Influence of nitrogen partial pressure on structure, mechanical and tribological properties of TaCN coatings. Ceramics International 47:18, pages 26233-26241.
Crossref
Crossref
Aditya Kumar, Rakhohari Bauri, Anirban Naskar & A.K. Chattopadhyay. (2021) Characterization of HiPIMS and DCMS deposited TiAlN coatings and machining performance evaluation in high speed dry machining of low and high carbon steel. Surface and Coatings Technology 417, pages 127180.
Crossref
Crossref
Gaurav D. Sonawane & Vikas G. Sargade. (2020) Machinability Study of Duplex Stainless Steel 2205 During Dry Turning. International Journal of Precision Engineering and Manufacturing 21:5, pages 969-981.
Crossref
Crossref
Chunmei Zhao, Changjun Shi, Qiang Wang, Changchun Zhao, Yukui Gao & Qingxiang Yang. (2020) Residual Stress Field of High-Strength Steel After Shot Peening by Numerical Simulation. Journal of Materials Engineering and Performance 29:1, pages 358-364.
Crossref
Crossref
T. Sampath Kumar, A. Vinoth Jebaraj, E. Shankar, N. Tamiloli & K. Sivakumar. (2019) Metallurgical and mechanical characterization of TiCN/TiAlN and TiAlN/TiCN bilayer nitride coatings. Surfaces and Interfaces 15, pages 256-264.
Crossref
Crossref
Neeraj Sharma & Kapil Gupta. (2019) Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304. Materials Research Express 6:8, pages 086585.
Crossref
Crossref
Eleonora Santecchia, Marcello Cabibbo, Abdel Hamouda, Farayi Musharavati, Anton Popelka & Stefano Spigarelli. (2019) Investigation of the Temperature-Related Wear Performance of Hard Nanostructured Coatings Deposited on a S600 High Speed Steel. Metals 9:3, pages 332.
Crossref
Crossref
R. K. Upadhyay & L. A. Kumaraswamidhas. 2019. Pollutants from Energy Sources. Pollutants from Energy Sources
325
346
.
Thomas Glaser, Tillmann Körner, Jochen Sapparth & Mats Wennmo. (2018) Hard Machining of Spur Gears with the InvoMillingTM Method. Journal of Manufacturing and Materials Processing 2:3, pages 44.
Crossref
Crossref
Xuming Zha, Feng Jiang & Xipeng Xu. (2017) Investigation of modelling and stress distribution of a coating/substrate system after an indentation test. International Journal of Mechanical Sciences 134, pages 1-14.
Crossref
Crossref
Hui-Bo He, Hua-Ying Li, Jun Yang, Xian-Yin Zhang, Qi-Bin Yue, Xue Jiang & Sung-ki Lyu. (2017) A study on major factors influencing dry cutting temperature of AISI 304 stainless steel. International Journal of Precision Engineering and Manufacturing 18:10, pages 1387-1392.
Crossref
Crossref
Janette Brezinová, Dagmar Jakubéczyová & Mariana Landová. (2015) Evaluation of AlTiCrN Coatings Surface after Tribological Tests. Materials Science Forum 818, pages 49-52.
Crossref
Crossref
Satish Chinchanikar & S.K. Choudhury. (2014) Hard turning using HiPIMS-coated carbide tools: Wear behavior under dry and minimum quantity lubrication (MQL). Measurement 55, pages 536-548.
Crossref
Crossref
Atul P. Kulkarni, Girish G. Joshi & Vikas G. Sargade. (2013) Dry Turning of AISI 304 Austenitic Stainless Steel Using AlTiCrN Coated Insert Produced by HPPMS Technique. Procedia Engineering 64, pages 737-746.
Crossref
Crossref