Performance of PVD AlTiCrN coating during machining of austenitic stainless steel

References

• Trent EM, Wright P: ‘Metal cutting’, 4th edn; 2000, Woburn, Butterworths Press.
   Google Scholar
• Klocke F, Kuchle A: ‘Manufacturing processes 1 cutting’, 1st edn; 2011, Berlin, Springer-Verlag.
   Google Scholar
• Zhong N, Zhou YX, Zhu XF, Zhang JJ, Li GY: ‘Microstructure and cutting performance of carbonitride coated tools in high speed machining of 40Cr steel’, Surf. Eng., 2011, 27, (4), 306–310.
   Web of Science ®Google Scholar
• Paro J, Hanninen H, Kauppinen V: ‘Tool wear and machinability of X5CrMnN18 18 stainless steels’, J. Mater. Process. Technol., 2001, 119, (1–3), 14–20.
   Web of Science ®Google Scholar
• O’Sullivan D, Cotterell M: ‘Machinability of austenitic stainless steel SS303’, J. Mater. Process. Technol., 2002, 124, 153–159.
   Web of Science ®Google Scholar
• Holmberg K, Matthews A: ‘Coating tribology: principles, techniques and application in surface engineering’, 257–260; 1994, Amsterdam, Elsevier Science B.V.
   Google Scholar
• Bromark M, Larsson M, Hedenqvist P, Olsson M, Hogmark S, Bergmann E: ‘PVD coatings for tool applications: tribological evaluation’, Surf. Eng., 1994, 10, (3), 205–214.
   Google Scholar
• Bunshah RF: ‘Handbook of hard coatings’; 2001, Park Ridge, NJ, Noyes Publications.
   Google Scholar
• Zoestbergen E, de Hosson JThM: ‘Crack resistance of PVD coatings: influence of surface treatment prior to deposition’, Surf. Eng., 2002, 18, (4), 283–288.
   Web of Science ®Google Scholar
• Tański T, Lukaszkowicz K: ‘Structure and properties of PVD coatings deposited on aluminium alloys’, Surf. Eng., 2012, 28, (8), 598–604.
   Web of Science ®Google Scholar
• Rother B: ‘Cathodic arc evaporation as a coating technique’, Surf. Eng., 1998, 4, 335–342.
   Google Scholar
• Alami J., Persson P.O.Å., Böhlmark J., Gudmundsson J.T., Music D., Helmersson U.: ‘Ion-assisted physical vapor deposition for enhanced film properties on nonflat surfaces’, J. Vac. Sci. Technol., 2005, 23, 278–284.
   Web of Science ®Google Scholar
• Ehiasarian AP, New R, Münz W.-D, Hultman L, Helmersson U, Kouznetsov V: ‘Influence of high power densities on the composition of pulsed magnetron plasmas’, Vacuum, 2002, 65, 147–154.
   Web of Science ®Google Scholar
• Hovsepian P, Ehiasarian AP, Petrov I: ‘TiAlCN/VCN nanolayer coatings suitable for machining of Al and Ti alloys deposited by combined high power impulse magnetron sputtering/unbalanced magnetron sputtering’, Surf. Eng., 2010, 26, (8), 610–614.
   Web of Science ®Google Scholar
• Dearnley P, Neville A, Turner S, Scheibe H, Tietema R, Tap R, Stüber M, Hovsepian P, Layyous A, Stenbom B: ‘Coatings tribology drivers for high density plasma technologies’, Surf. Eng., 2010, 26, (1–2), 80–96.
   Web of Science ®Google Scholar
• Takalka H, Nakamura E, Oshika T, Nishiyama A: ‘Relationship between an affinity of (Ti1−x,Alx)N layer toward iron and its cutting performance’, Surf. Coat. Technol., 2004, 177–188, 306–311.
   Web of Science ®Google Scholar
• Zhong D, Mishra B, Moore JJ, Madan A: ‘Effect of pulsed plasma processing on controlling nanostructure and properties of thin film/coatings’, Surf. Eng., 2004, 20, (3), 196–204.
   Web of Science ®Google Scholar
• Gil L.E., Liscano1 S., Goudeau P., Le Bourhis E., Puchi-Cabrera E.S., Staia M.H.: ‘Effect of TiAlN PVD coatings on corrosion performance of WC–6%Co’, Surf. Eng., 2010, 26, (8), 566–562.
   Google Scholar
• Goršćak D, Panjan P, Čekada M, Ćurković L: ‘Comparison of mechanical properties of various PVD hard coatings for forming tools’, Surf. Eng., 2007, 23, (3), 177–182.
   Web of Science ®Google Scholar
• Korkut I, Kasap M, Ciftci I, Seker U: ‘Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel’, Mater. Des., 2004, 25, 303–305.
   Web of Science ®Google Scholar
• Laxane RB, Bhide RS, Patil AS, Sane SG: ‘Characterisation of chromium nitride physical vapour deposition coating on diesel engine pistons’, Surf. Eng., 2006, 22, (1), 78–80.
   Web of Science ®Google Scholar
• Warcholinski B, Gilewicz A: ‘Mechanical properties of multilayer TiAlN/CrN coatings deposited by cathodic arc evaporation’, Surf. Eng., 2011, 27, (7), 491–497.
   Web of Science ®Google Scholar
• Willmann H, Mayrhofer PH, Hultman L, Mitterer C: ‘Thermal stability and age hardening of supersaturated AlCrN hard coatings’, Int. Heat Treat. Surf. Eng., 2007, 1, (2), 75–79.
   Google Scholar
• Pang X, Gao K, Yang H, Qiao L, Wang Y, Volinsky AA: ‘Interfacial microstructure of chromium oxide coatings’, Adv. Eng. Mater., 2007, 9, (7), 594–599.
   Web of Science ®Google Scholar
• Balakrishnan G, Kuppusami P, Sairam TN, Rao Subba RV, Mohandas E, Sastikumar D: ‘Influence of background gas atmosphere on formation of Cr2O3 thin films prepared by pulsed laser deposition’, Surf. Eng., 2009, 23, (3), 223–227.
   Web of Science ®Google Scholar
• Lattemann M, Ehiasarian AP, Bohlmark J, Persson PÅO, Helmersson U: ‘Investigation of high power impulse magnetron sputtering pretreated interfaces for adhesion enhancement of hard coatings on steel’, Surf. Coat. Technol., 2006, 200, 6495–6499.
   Web of Science ®Google Scholar
• Ehiasariana AP, Wen JG, Petrov I: ‘Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion’, J. Appl. Phys., 2007, 101, 543–551.
   Google Scholar