Citations (38)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar. (2023) Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review. Journal of Adhesion Science and Technology 37:22, pages 3053-3124.
Read now
Read now
Jasjeevan Singh & Simranpreet Singh Gill. (2023) Turning of Al 7075-T6 aerospace alloy under different sustainable metalworking fluid strategies by coated carbide tools. Surface Engineering 39:3, pages 275-294.
Read now
Read now
Gurpreet Singh, Vivek Aggarwal & Sehijpal Singh. (2021) Experimental investigations into machining performance of Hastelloy C-276 in different cooling environments. Materials and Manufacturing Processes 36:15, pages 1789-1799.
Read now
Read now
Kore Mahesh, Jibin T Philip, S N Joshi & Basil Kuriachen. (2021) Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes 36:7, pages 753-791.
Read now
Read now
J. Y. Yi, K. H. Chen, Y. C. Xu & C. J. Zhu. (2019) Performance of AlTiBN and AlTiTaN coatings during milling of titanium. Surface Engineering 35:6, pages 501-506.
Read now
Read now
A. Thakur, S. Gangopadhyay, K. P. Maity & S. K. Sahoo. (2016) Evaluation on Effectiveness of CVD and PVD Coated Tools during Dry Machining of Incoloy 825. Tribology Transactions 59:6, pages 1048-1058.
Read now
Read now
A. Mohanty, S. Gangopadhyay & A. Thakur. (2016) On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel. Materials and Manufacturing Processes 31:7, pages 869-879.
Read now
Read now
A. Thakur, S. Gangopadhyay & A. Mohanty. (2015) Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning. Materials and Manufacturing Processes 30:8, pages 1026-1034.
Read now
Read now
Articles from other publishers (30)
Zhiqiang Zhang, Daohui Xiang, Zhipeng Zhang, Yu Zhang & Bo Zhao. (2023) Study on tribology and cutting performance of boron doped diamond composite coated tool. International Journal of Refractory Metals and Hard Materials 117, pages 106385.
Crossref
Crossref
Abdulsalam Abdulaziz Al-Tamimi & Chintakindi Sanjay. (2023) Intelligent Systems to Optimize and Predict Machining Performance of Inconel 825 Alloy. Metals 13:2, pages 375.
Crossref
Crossref
Mahendra Singh, Soni Kumari, Ajay Biswas & Kumar Abhishek. (2023) Influence of advanced coated tools on surface integrity characteristics of Nimonic C263. Materials Today: Proceedings.
Crossref
Crossref
Daohui Xiang, Zebin Su, Yanqin Li & Zhiqiang Zhang. (2022) The effect of laser texture on adhesion and tribological properties of boron-doped diamond film on WC-Co cemented carbide. Diamond and Related Materials 130, pages 109469.
Crossref
Crossref
SABANA AZIM, ARUNA THAKUR & SOUMYA GANGOPADHYAY. (2022) Analysis of surface layer characteristics after machining of a Ni-based superalloy. Sādhanā 47:4.
Crossref
Crossref
Sabana Azim, Soumya Gangopadhyay, Siba Sankar Mahapatra & Rinku K. Mittal. (2022) Performance evaluation of CrAlN and TiAlN coatings deposited by HiPIMS in micro drilling of a Ni-based superalloy. Surface and Coatings Technology 449, pages 128980.
Crossref
Crossref
Mahendra Singh, Ajay Biswas & Arabinda Meher. (2022) Comparative evaluation of machinability aspects for a sustainable alternative in the machining of Nimonic C-263, a Ni-based superalloy. Materials Today: Proceedings.
Crossref
Crossref
Wei Wang, Yepeng Tu, Caiyuan Sun, Jin Zhang & Songxia Li. (2022) Wear Performance of TiCN Coating on Medium-Carbon Steel by Composite Thermo-Reactive Deposition. Transactions of the Indian Institute of Metals 75:11, pages 2759-2766.
Crossref
Crossref
Gurpreet Singh, Vivek Aggarwal, Sehijpal Singh, Balkar Singh, Shubham Sharma, Jujhar Singh, Changhe Li, R.A. Ilyas & Abdullah Mohamed. (2022) Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants. Materials 15:15, pages 5451.
Crossref
Crossref
M. Kamatchi Hariharan, M.D. Rajkamal, K. Ravikumar & M. Sheik Mohammed. (2022) Investigation on effect of TiN, TiAlN & DLC-triple layer coated carbide tool in machining of Al-Si 4032 alloy. Materials Today: Proceedings 59, pages 39-46.
Crossref
Crossref
Anton Seleznev, Nestor Washington Solis Pinargote & Anton Smirnov. (2021) Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 11:9, pages 1385.
Crossref
Crossref
M. Kamatchi Hariharan, A. Anderson, K. Ravi Kumar & A. Senthilkumar. (2021) Optimization of machining parameters in turning of LM6 high silicon aluminium alloy using aluminium titanium nitride and diamond like carbon coated carbide tool. Materials Today: Proceedings 45, pages 5853-5859.
Crossref
Crossref
J Kesavan & V Senthilkumar. (2020) Experimental investigations on cryo-machining of Hastelloy C-276 with tool wear characteristics. Sādhanā 45:1.
Crossref
Crossref
Raju Pawade, Avinash Khadtare, Dhanashree Dhumal & Vishal Wankhede. (2019) Machinability Assessment in High Speed Turning of High Strength Temperature Resistant Superalloys. Journal of Advanced Manufacturing Systems 18:04, pages 595-623.
Crossref
Crossref
Neeraj Sharma & Kapil Gupta. (2019) Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304. Materials Research Express 6:8, pages 086585.
Crossref
Crossref
K. Venkatesan, K. Manivannan, S. Devendiran, Arun Tom Mathew, Nouby M Ghazaly, Aadhavan & S.M. Neha Benny. (2019) Study of Forces, Surface Finish and Chip Morphology on Machining of Inconel 825. Procedia Manufacturing 30, pages 611-618.
Crossref
Crossref
Xiaoliang Liang, Zhanqiang Liu & Bing Wang. (2019) State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review. Measurement 132, pages 150-181.
Crossref
Crossref
Rajiv Kumar Yadav, Anadh Gandhi, Kumar Abhishek, Siba Sankar Mahapatra & Goutam Nandi. (2019) Effect of Feed and Nose radius on various machinability criteria in dry machining of Inconel 825. Materials Today: Proceedings 18, pages 5231-5239.
Crossref
Crossref
K. Vetri Velmurugan, K. Venkatesan, S. Devendiran & Arun Tom Mathew. 2019. Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018). Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
179
198
.
Bing Wang & Zhanqiang Liu. (2018) Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review. The International Journal of Advanced Manufacturing Technology 98:5-8, pages 1925-1975.
Crossref
Crossref
S. K. Tamang, M. Chandrasekaran & A. K. Sahoo. (2018) Sustainable machining: an experimental investigation and optimization of machining Inconel 825 with dry and MQL approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:8.
Crossref
Crossref
A Thakur & S Gangopadhyay. (2016) Evaluation of micro-features of chips of Inconel 825 during dry turning with uncoated and chemical vapour deposition multilayer coated tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:6, pages 979-994.
Crossref
Crossref
Xuming Zha, Feng Jiang & Xipeng Xu. (2017) Investigation of modelling and stress distribution of a coating/substrate system after an indentation test. International Journal of Mechanical Sciences 134, pages 1-14.
Crossref
Crossref
M.M. Ratnam. 2017. Comprehensive Materials Finishing. Comprehensive Materials Finishing
1
25
.
A. ?. S. Antonialli, A. Magri & A. E. Diniz. (2016) Tool life and tool wear in taper turning of a nickel-based superalloy. The International Journal of Advanced Manufacturing Technology 87:5-8, pages 2023-2032.
Crossref
Crossref
A. Thakur & S. Gangopadhyay. (2016) Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825. Tribology International 102, pages 198-212.
Crossref
Crossref
A. Thakur & S. Gangopadhyay. (2016) Dry machining of nickel-based super alloy as a sustainable alternative using TiN/TiAlN coated tool. Journal of Cleaner Production 129, pages 256-268.
Crossref
Crossref
B. Koyilada, S. Gangopadhyay & A. Thakur. (2016) Comparative evaluation of machinability characteristics of Nimonic C-263 using CVD and PVD coated tools. Measurement 85, pages 152-163.
Crossref
Crossref
A. Thakur & S. Gangopadhyay. (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture 100, pages 25-54.
Crossref
Crossref
A. Thakur, A. Mohanty & S. Gangopadhyay. (2014) Comparative study of surface integrity aspects of Incoloy 825 during machining with uncoated and CVD multilayer coated inserts. Applied Surface Science 320, pages 829-837.
Crossref
Crossref