Citations (331)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (33)
Simeon A. Babalola, Samik Dutta, Himadri Roy & Naresh C. Murmu. (2023) Deciphering the interdependent impact of process parameters in friction stir welding - Part I: an overview of the challenges and way forward. Materials and Manufacturing Processes 38:11, pages 1339-1360.
Read now
Read now
Jainesh Sarvaiya & Dinesh Singh. (2023) Influence of hybrid pin profile on enhancing microstructure and mechanical properties of AA5052/SiC surface composites fabricated via friction stir processing. Canadian Metallurgical Quarterly 62:3, pages 426-439.
Read now
Read now
Shwetanshu Gaurav, R. S. Mishra & M. Zunaid. (2023) A critical review on mechanical and microstructural properties of dissimilar aluminum (Al)-magnesium (Mg) alloys. Journal of Adhesion Science and Technology 37:7, pages 1117-1149.
Read now
Read now
Ankur Vasava & Dinesh Singh. (2023) Influence of various tool shoulder design on hybrid surface composite of AA7075-T651/SiC/graphene through friction stir processing. Canadian Metallurgical Quarterly 0:0, pages 1-19.
Read now
Read now
K. N. Uday & G. Rajamurugan. (2023) Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites – a review. Journal of Adhesion Science and Technology 37:5, pages 767-800.
Read now
Read now
B. D. Bankong, T. E. Abioye, T. O. Olugbade, H. Zuhailawati, O. O. Gbadeyan & T. I. Ogedengbe. (2023) Review of post-processing methods for high-quality wire arc additive manufacturing. Materials Science and Technology 39:2, pages 129-146.
Read now
Read now
Pragyan Paramita Mohanty. (2022) Wear of friction stir tools considering qualitative and quantitative aspects: a review. International Journal of Ambient Energy 43:1, pages 5535-5553.
Read now
Read now
Devang Sejani, Wenya Li & Vivek Patel. (2022) Stationary shoulder friction stir welding – low heat input joining technique: a review in comparison with conventional FSW and bobbin tool FSW. Critical Reviews in Solid State and Materials Sciences 47:6, pages 865-914.
Read now
Read now
Getachew Gebreamlak, Sivaprakasam Palani, Belete Sirhabizu, Samson Mekbib Atnaw & Elias Gebremichael. (2022) Dissimilar friction stir welding process-a review. Advances in Materials and Processing Technologies 8:4, pages 3900-3922.
Read now
Read now
R Subramanya B Prabhu, Arun Kumar Shettigar, Manjunath Patel GC, Mervin Herbert & Shrikantha S Rao. (2022) Influence of process variables on joint attributes of friction stir welded aluminium matrix composite. Advances in Materials and Processing Technologies 8:2, pages 1550-1559.
Read now
Read now
R. Venkateswara Rao & M. Senthil Kumar. (2022) Effect of pin geometry on material flow characteristics of friction stir welded dissimilar AA6061/AA2014 alloys. Australian Journal of Mechanical Engineering 20:2, pages 552-566.
Read now
Read now
Md. Parwez Alam & Amar Nath Sinha. (2022) Optimization of process parameters of friction stir welding using desirability function analysis. Welding International 36:3, pages 129-143.
Read now
Read now
Kush P. Mehta & Pedro Vilaça. (2022) A review on friction stir-based channeling. Critical Reviews in Solid State and Materials Sciences 47:1, pages 1-45.
Read now
Read now
Akihiko Ikuta. (2022) Influence of material adhered to welding tool in consideration of shape of cutting tools on friction stir spot welds. Welding International 36:1, pages 53-64.
Read now
Read now
Ashish Kumar Srivastava, Nilesh Kumar, Ambuj Saxena & Sandeep Tiwari. (2021) Effect of friction stir processing on microstructural and mechanical properties of lightweight composites and cast metal alloys – A review. International Journal of Cast Metals Research 34:3-6, pages 169-195.
Read now
Read now
Vladimir Torganchuk, Igor Vysotskiy, Sergey Malopheyev, Andrey Belyakov & Rustam Kaibyshev. (2021) On friction stir welding of a medium manganese austenitic steel. Philosophical Magazine 101:5, pages 576-597.
Read now
Read now
Shalok Bharti, Nilesh D. Ghetiya & Kaushik M. Patel. (2021) A review on manufacturing the surface composites by friction stir processing. Materials and Manufacturing Processes 36:2, pages 135-170.
Read now
Read now
Dipen Kumar Rajak, Durgesh D. Pagar, Pradeep L. Menezes & Arameh Eyvazian. (2020) Friction-based welding processes: friction welding and friction stir welding. Journal of Adhesion Science and Technology 34:24, pages 2613-2637.
Read now
Read now
Zhikang Shen, Yuquan Ding & Adrian P. Gerlich. (2020) Advances in friction stir spot welding. Critical Reviews in Solid State and Materials Sciences 45:6, pages 457-534.
Read now
Read now
Virendra Pratap Singh, Surendra Kumar Patel, Nitin Kumar & Basil Kuriachen. (2019) Parametric effect on dissimilar friction stir welded steel-magnesium alloys joints: a review. Science and Technology of Welding and Joining 24:8, pages 653-684.
Read now
Read now
L. H. Shah, S. Walbridge & A. Gerlich. (2019) Tool eccentricity in friction stir welding: a comprehensive review. Science and Technology of Welding and Joining 24:6, pages 566-578.
Read now
Read now
Padmakumar A. Bajakke, Vinayak R. Malik & Anand S. Deshpande. (2019) Particulate metal matrix composites and their fabrication via friction stir processing – a review. Materials and Manufacturing Processes 34:8, pages 833-881.
Read now
Read now
Akihiko Ikuta & Thomas H North. (2019) Characteristics of friction stir spot welding tools in consideration of cutting tools. Welding International 33:4-6, pages 200-210.
Read now
Read now
Kishan Fuse & Vishvesh Badheka. (2019) Bobbin tool friction stir welding: a review. Science and Technology of Welding and Joining 24:4, pages 277-304.
Read now
Read now
V. K. Parikh, A. D. Badgujar & N. D. Ghetiya. (2019) Joining of metal matrix composites using friction stir welding: a review. Materials and Manufacturing Processes 34:2, pages 123-146.
Read now
Read now
V. M. Magalhães, C. Leitão & D. M. Rodrigues. (2018) Friction stir welding industrialisation and research status. Science and Technology of Welding and Joining 23:5, pages 400-409.
Read now
Read now
Akihiko Ikuta, Thomas H North & Yoshihiko Uematsu. (2018) Characteristics of keyhole refill process using friction stir spot welding. Welding International 32:6, pages 417-426.
Read now
Read now
Sandeep Rathee, Sachin Maheshwari & Arshad Noor Siddiquee. (2018) Issues and strategies in composite fabrication via friction stir processing: A review. Materials and Manufacturing Processes 33:3, pages 239-261.
Read now
Read now
W. D. P. Brassington & P. A. Colegrove. (2017) Alternative friction stir welding technology for titanium–6Al–4V propellant tanks within the space industry. Science and Technology of Welding and Joining 22:4, pages 300-318.
Read now
Read now
I. Galvão, A. Loureiro & D. M. Rodrigues. (2016) Critical review on friction stir welding of aluminium to copper. Science and Technology of Welding and Joining 21:7, pages 523-546.
Read now
Read now
C. Langlade, A. Roman, D. Schlegel, E. Gete & M. Folea. (2016) Formation of a Tribologically Transformed Surface (TTS) on AISI 1045 Steel by Friction Stir Processing. Materials and Manufacturing Processes 31:12, pages 1565-1572.
Read now
Read now
G. K. Padhy, C. S. Wu & S. Gao. (2015) Auxiliary energy assisted friction stir welding – status review. Science and Technology of Welding and Joining 20:8, pages 631-649.
Read now
Read now
. (2012) Special Issue on Advances in High Temperature Joining of Materials. Canadian Metallurgical Quarterly 51:3, pages 237-237.
Read now
Read now
Articles from other publishers (298)
S. Emamian, M. Awang & Bahman Meyghani. 2024. Advances in Material Science and Engineering. Advances in Material Science and Engineering
294
311
.
Wondu Tesfaye Heramo & Henok Zewdu Workneh. (2023) Optimization of process parameters in friction stir welding of dissimilar aluminum alloys (AA6061–T6 and AA5052–H32). The International Journal of Advanced Manufacturing Technology 129:9-10, pages 4473-4489.
Crossref
Crossref
Yeong-Maw Hwang, Cheng-Yu Lu & Ren-Yu Chen. (2023) Effect of micro-friction stir welding parameters on the mechanical properties and microstructure of 5052 aluminum thin sheets. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
Ahmed I. Alhatti, Jamal Sheikh-Ahmad, Fahad Almaskari, Kamran A. Khan, Suleyman Deveci & Abdelrahman I. Hosny. (2023) A Study of the Friction Stir Lap Welding of AA5052 and Polypropylene. Polymers 15:23, pages 4481.
Crossref
Crossref
Mohammad Reza Akbarpour, Homayoun Mousa Mirabad, Farid Gazani, Iman Khezri, Amirhossein Ahmadi Chadegani, Ali Moeini & Hyoung Seop Kim. (2023) An overview of friction stir processing of Cu–SiC composites: Microstructural, mechanical, tribological, and electrical properties. Journal of Materials Research and Technology 27, pages 1317-1349.
Crossref
Crossref
D. Ambrosio, Y. Morisada, K. Ushioda & H. Fujii. (2023) Material flow in friction stir welding: A review. Journal of Materials Processing Technology 320, pages 118116.
Crossref
Crossref
Essam B. Moustafa, Mazen Sharaf, Ghazi Alsoruji, Ahmed O. Mosleh, S. S. Mohamed & Hossameldin Hussein. (2023) Microstructural and Mechanical Characterization of the Dissimilar AA7075 and AA2024 Aluminum Alloys Reinforced with Different Carbide Particles Welded by Friction Stir Welding. Journal of Composites Science 7:11, pages 448.
Crossref
Crossref
Uttam Acharya, Uday Kumar, Moupiya Ghosh, Smrity Choudhury, Ashok Kumar Srivastava & Barnik Saha Roy. (2023) An experimental approach for achieving high strength dissimilar aluminium-magnesium joints: Application of tool pin profiles on different joint configurations. CIRP Journal of Manufacturing Science and Technology 45, pages 49-60.
Crossref
Crossref
Rustem Munasypov, Sergei Fetsak & Artem Danilin. (2023) Friction Mixing Welding Process Monitoring System. Friction Mixing Welding Process Monitoring System.
Suleyman Kilic, Fahrettin Ozturk & Mehmet Fatih Demirdogen. (2023) A comprehensive literature review on friction stir welding: Process parameters, joint integrity, and mechanical properties. Journal of Engineering Research.
Crossref
Crossref
Deepika Harwani, Vishvesh Badheka & Vivek Patel. (2023) Investigation of superplastic behaviour in double-pass friction stir processed Mg–Al–Zn alloy. International Journal of Lightweight Materials and Manufacture 6:3, pages 405-415.
Crossref
Crossref
Mustafa Yildiz, Fahrettin Ozturk & Jamal Sheikh-Ahmad. (2023) A Comprehensive Review on Friction Stir Welding of High-Density Polyethylene. Arabian Journal for Science and Engineering 48:9, pages 11167-11210.
Crossref
Crossref
Viresh Payak, Jawahar Paulraj, Barnik Saha Roy, Manish Bhargava & Smrity Choudhury. (2023) Microstructural and mechanical characteristics of friction stir welded Al6101/C11000 joints with zinc and silver interlayer. The International Journal of Advanced Manufacturing Technology 128:3-4, pages 1419-1439.
Crossref
Crossref
R. Venkateswara Rao & Senthil Kumar Marikkannan. (2023) Experimental Analysis and Weld Joint Characteristics Study on Friction Stir Welded Dissimilar Joints Fabricated by Novel Hybrid Pin Profiles. Transactions of the Indian Institute of Metals.
Crossref
Crossref
B. Vinith, S. A. Dhanush Dharshan, S. Aravind & Bipin Kumar Singh. (2023) Friction stir welding evolution, hybrid technologies and shoulder shape. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:4, pages 1443-1458.
Crossref
Crossref
Hussein Ali Hussein, Akeel Dhahir Subhi & Makarim Hazim Abdulkareem. (2022) Characteristics of Functionally Graded AZ91 Mg Alloy/WC Nanocomposite Manufactured Using Friction Stir Processing. Journal of Materials Engineering and Performance 32:16, pages 7149-7161.
Crossref
Crossref
Sipokazi Mabuwa & Velaphi Msomi. (2023) Investigation of the Microstructure and Mechanical Properties in Friction Stir Welded Dissimilar Aluminium Alloy Joints via Sampling Direction. Crystals 13:7, pages 1108.
Crossref
Crossref
Piotr Noga, Tomasz Skrzekut, Maciej Wędrychowicz, Marek St. Węglowski & Aleksandra Węglowska. (2023) Research of Friction Stir Welding (FSW) and Electron Beam Welding (EBW) Process for 6082-T6 Aluminum Alloy. Materials 16:14, pages 4937.
Crossref
Crossref
Nergizhan Anaç. (2023) The mechanical properties of dissimilar/similar polymer materials joined by friction stir welding. Heliyon 9:7, pages e17627.
Crossref
Crossref
Emre Can Çavuş & Oğuz Koçar. (2023) Mechanical behavior of AA5083/AA6061 friction stir welds using modal analysis. Materials Testing 65:6, pages 961-971.
Crossref
Crossref
ShivaKumar G N & Rajamurugan G. (2022) Understanding the effect of particle reinforcement on friction stir weldment: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237:6, pages 1231-1250.
Crossref
Crossref
Tanvir Singh. (2023) Nanoparticles reinforced joints produced using friction stir welding: a review. Engineering Research Express 5:2, pages 022001.
Crossref
Crossref
Francisco B. Ferreira, Igor Felice, Isaque Brito, João Pedro Oliveira & Telmo Santos. (2023) A Review of Orbital Friction Stir Welding. Metals 13:6, pages 1055.
Crossref
Crossref
Dezhi Li, Carl Slater, Huisheng Cai, Xiaonan Hou, Yongbing Li & Qudong Wang. (2023) Joining Technologies for Aluminium Castings—A Review. Coatings 13:5, pages 958.
Crossref
Crossref
Bala Murali Nagarajan & Manikandan Manoharan. (2021) Assessment of dissimilar joining between metal and polymer hybrid structure with different joining processes. Journal of Thermoplastic Composite Materials 36:5, pages 2169-2211.
Crossref
Crossref
Jainesh Sarvaiya & Dinesh Singh. (2023) Development of surface composites AA5052/SiC using micro and nano-SiC reinforcement particles via friction stir processing. Materials Today: Proceedings.
Crossref
Crossref
T. Niranjan, B. Singaravel, B. Chakradhar & S. Srinivasulu Raju. (2023) Process parameter optimization in friction stir welding process using Taguchi method. Materials Today: Proceedings.
Crossref
Crossref
Hassanein I. Khalaf, Raheem Al-Sabur & Hamed Aghajani Derazkola. (2023) Effect of number of tool shoulders on the quality of steel to magnesium alloy dissimilar friction stir welds. Archives of Civil and Mechanical Engineering 23:2.
Crossref
Crossref
Jainesh Sarvaiya & Dinesh Singh. (2023) Prediction of performance parameters in friction stir processing using ANN and multiple regression models. Materials Today: Proceedings.
Crossref
Crossref
Behrouz Abnar, Samaneh Gashtiazar & Mousa Javidani. (2023) Friction Stir Welding of Non-Heat Treatable Al Alloys: Challenges and Improvements Opportunities. Crystals 13:4, pages 576.
Crossref
Crossref
Mohammad Khalid, Farhan Hameed Malik, Dani Abdo & Apurv Yadav. (2023) The Experimental Investigation between Similar and Dissimilar materials using Friction Stir Welding Method. The Experimental Investigation between Similar and Dissimilar materials using Friction Stir Welding Method.
Deepika Harwani, Vishvesh Badheka & Vivek Patel. (2023) High temperature tensile deformation in single-pass friction stirred AZ31 alloy. International Journal of Lightweight Materials and Manufacture 6:1, pages 140-148.
Crossref
Crossref
S. K. Nirgude & S. D. Kalpande. (2023) Parametric optimization of friction stir welding of AA 6101 T-64 and pure Cu using response surface methodology. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Mayank Verma & Probir Saha. (2023) Effect of micro-grooves featured tool and their depths on dissimilar micro-friction stir welding (μFSW) of aluminum alloys: A study of process responses and weld characteristics. Materials Characterization 196, pages 112614.
Crossref
Crossref
Guilherme Gadelha de Sousa Figueiredo, Igor Jordão Marques, Lucas Oliveira Siqueira, Jiajia Shen, Joao Pedro Oliveira & Tiago Felipe de Abreu Santos. (2022) A coupled computational fluid dynamics approach as a viable tool for thermal history assessment of UNS S32205 duplex stainless steels friction stir welded joints. Welding in the World 67:2, pages 353-372.
Crossref
Crossref
Shyam Sundar Das, Avinash Ravi Raja, Hemant Nautiyal, Rohit Kumar Singh Gautam, Pushkar Jha, Jyoti Sharma & Sudesh Singh. (2023) A Review on Aluminum Matrix Composites Synthesized by FSP. Macromolecular Symposia 407:1.
Crossref
Crossref
Surendra Kumar Lader, Mayuri Baruah, Raj Ballav & Swarup Bag. (2023) Recent Developments in Friction Stir Welding Tools for Weld Bead Defects Minimization – A Review. Soldagem & Inspeção 28.
Crossref
Crossref
R. Chandana & K. Saraswathamma. (2023) Impact of tool pin profiles in friction stir welding process-A review. Materials Today: Proceedings 76, pages 602-606.
Crossref
Crossref
Rakesh Kumar, Shailendra Singh Bhadauria, Varun Sharma & Manoj Kumar. (2023) Effect on microstructure and mechanical properties of single pass friction stir welded aluminium alloy AA-7075-T651 joint. Materials Today: Proceedings 80, pages 40-47.
Crossref
Crossref
Jie Chen, Xue Wang, Lei Shi, Chuansong Wu, Huijie Liu & Gaoqiang Chen. (2023) Numerical simulation of weld formation in friction stir welding based on non-uniform tool-workpiece interaction: An effect of tool pin size. Journal of Manufacturing Processes 86, pages 85-97.
Crossref
Crossref
Avneesh Kumar, R. Ganesh Narayanan & Nelson Muthu. 2023. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Ramprasad Ganesan & Hema Pothur. 2023. Advances in Additive Manufacturing and Metal Joining. Advances in Additive Manufacturing and Metal Joining
445
460
.
S. Dharani Kumar, B. Arulmurugan, N. Muthukumaran & S. Ramesh Babu. 2023. Advances in Processing of Lightweight Metal Alloys and Composites. Advances in Processing of Lightweight Metal Alloys and Composites
231
248
.
Anugrah Singh, Vikas Upadhyay & Joy Prakash Misra. 2023. Advances in Modelling and Optimization of Manufacturing and Industrial Systems. Advances in Modelling and Optimization of Manufacturing and Industrial Systems
581
592
.
Namrata Thakkar & Vishvesh Badheka. 2023. Advances in Manufacturing Engineering. Advances in Manufacturing Engineering
175
193
.
L. H. Ahmad Shah, S. Walbridge & A. Gerlich. 2023. Technological Advancement in Instrumentation & Human Engineering. Technological Advancement in Instrumentation & Human Engineering
669
676
.
S. M. Senthil, M. Bhuvanesh Kumar & Milon Selvam Dennison. (2022) A Contemporary Review on Friction Stir Welding of Circular Pipe Joints and the Influence of Fixtures on This Process. Advances in Materials Science and Engineering 2022, pages 1-25.
Crossref
Crossref
C. Devanathan, A. Suresh Babu, S. Senthil Murugan, E. Shankar & R. Giri. (2022) Review of Joining Various Materials by FSW Process and Applications. Annals of Dunarea de Jos University of Galati. Fascicle XII, Welding Equipment and Technology 33, pages 75-88.
Crossref
Crossref
Nada Ratković, Živana Jovanović Pešić, Dušan Arsić, Miloš Pešić & Dragan Džunić. (2022) Tool geometry effect on material flow and mixture in FSW. Advanced Technologies & Materials 47:2, pages 33-36.
Crossref
Crossref
Wazir Hassan Khalafe, Ewe Lay Sheng, Mohd Rashdan Bin Isa, Abdoulhadi Borhana Omran & Shazarel Bin Shamsudin. (2022) The Effect of Friction Stir Welding Parameters on the Weldability of Aluminum Alloys with Similar and Dissimilar Metals: Review. Metals 12:12, pages 2099.
Crossref
Crossref
Ankit Thakur, Ambikashwer Ojha, Shailendra Singh Bhadauria & Varun Sharma. (2022) Influence of forging action on the microstructural and mechanical characteristics of the friction stir welded joints of aluminum alloy with varied joint configurations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:23, pages 11330-11344.
Crossref
Crossref
Saeid Alipour, Atieh Moridi, Frank Liou & Arezoo Emdadi. (2022) The Trajectory of Additively Manufactured Titanium Alloys with Superior Mechanical Properties and Engineered Microstructures. Additive Manufacturing 60, pages 103245.
Crossref
Crossref
M. Khalili, A.R. Eivani, S.H. Seyedein & H.R. Jafarian. (2022) The effect of multi-pass friction stir processing on microstructure and mechanical properties of dual-phase brass alloy. Journal of Materials Research and Technology 21, pages 1177-1195.
Crossref
Crossref
Arabinda Meher, Manas Mohan Mahapatra, Priyaranjan Samal & Pandu R. Vundavilli. (2022) A review on manufacturability of magnesium matrix composites: Processing, tribology, joining, and machining. CIRP Journal of Manufacturing Science and Technology 39, pages 134-158.
Crossref
Crossref
Zeping Han & Lijie Cao. (2022) Research progress on numerical simulation of temperature field in friction stir welding of dissimilar alloys. Research progress on numerical simulation of temperature field in friction stir welding of dissimilar alloys.
Gaurang R. Joshi, Vishvesh J. Badheka, Raghavendra S. Darji, Ankit D. Oza, Vivek J. Pathak, Dumitru Doru Burduhos-Nergis, Diana Petronela Burduhos-Nergis, Gautam Narwade & Gopinath Thirunavukarasu. (2022) The Joining of Copper to Stainless Steel by Solid-State Welding Processes: A Review. Materials 15:20, pages 7234.
Crossref
Crossref
Hemant Agiwal, Mohammad Ali Ansari, Daniel Franke, Patrick Faue, Samuel J. Clark, Kamel Fezzaa, Shiva Rudraraju, Michael Zinn & Frank E. Pfefferkorn. (2022) Material flow visualization during friction stir welding using high-speed X-ray imaging. Manufacturing Letters 34, pages 62-66.
Crossref
Crossref
Kai Hu, Yanjin Guan, Jiqiang Zhai, Yi Li, Fengjiao Chen, Ya Liu & Jun Lin. (2022) Effect on microstructure and properties of LA103Z Mg–Li alloy plate by multi-pass friction stir processing. Journal of Materials Research and Technology 20, pages 3985-3994.
Crossref
Crossref
D.A.P. Prabhakar, Arun Kumar Shettigar, Mervin A. Herbert, Manjunath Patel G C, Danil Yu. Pimenov, Khaled Giasin & Chander Prakash. (2022) A comprehensive review of friction stir techniques in structural materials and alloys: challenges and trends. Journal of Materials Research and Technology 20, pages 3025-3060.
Crossref
Crossref
Yuichi Ono & Takashi Yokoyama. (2022) Determination of local constitutive behavior of AA6061–T6 friction stir welds using digital image correlation. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236:8, pages 1574-1589.
Crossref
Crossref
Ahmed Y Shash, Mohamed H El-Moayed, Mahmoud Abd Rabou & Mahmoud GD El-Sherbiny. (2022) A coupled experimental and numerical analysis of AA6063 friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:15, pages 8392-8400.
Crossref
Crossref
Zs. F. Kovács. (2022) The effect of Argon Shield Gas and Cold Air for Friction Stir Welding of Ceramic-reinforced Aluminium Matrix Composite and Aluminium Alloy. IOP Conference Series: Materials Science and Engineering 1246:1, pages 012035.
Crossref
Crossref
Zhen Sun, Pengfei Liu & Xinghua Yu. (2022) Thermomechanical analysis of friction stir welding using a new velocity-based model for tool-workpiece interaction. The International Journal of Advanced Manufacturing Technology 121:11-12, pages 7341-7357.
Crossref
Crossref
L. Prasad, A. Kumar, R. Jaiswal, A. Kumar, V. Kumar & A. Yadav. (2022) Mechanical properties of AA6061T6 and AA6351T6 plates joined by friction stir welding. Materialwissenschaft und Werkstofftechnik 53:8, pages 888-896.
Crossref
Crossref
Nectarios Vidakis, Markos Petousis, Nikolaos Mountakis & John D. Kechagias. (2022) Optimization of Friction Stir Welding Parameters in Hybrid Additive Manufacturing: Weldability of 3D-Printed Poly(methyl methacrylate) Plates. Journal of Manufacturing and Materials Processing 6:4, pages 77.
Crossref
Crossref
Nafeez Ahmed Liyakat & Dhinakaran Veeman. (2022) Improvement of mechanical and microstructural properties of AA 5052-H32 TIG weldment using friction stir processing approach. Journal of Materials Research and Technology 19, pages 332-344.
Crossref
Crossref
Leonardo Viana Dias, Aderci de Freitas Filho & Cláudio Turani Vaz. (2022) Parameter optimization in the friction stir welding of polycarbonate using cylindrical and conical tool pins. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:7.
Crossref
Crossref
Nectarios Vidakis, Markos Petousis, Nikolaos Mountakis & John D. Kechagias. (2022) Material extrusion 3D printing and friction stir welding: an insight into the weldability of polylactic acid plates based on a full factorial design. The International Journal of Advanced Manufacturing Technology 121:5-6, pages 3817-3839.
Crossref
Crossref
Utkarsh Chadha, Senthil Kumaran Selvaraj, Neha Gunreddy, S. Sanjay Babu, Swapnil Mishra, Deepesh Padala, M. Shashank, Rhea Mary Mathew, S. Ram Kishore, Shraddhanjali Panigrahi, R. Nagalakshmi, R. Lokesh Kumar & Addisalem Adefris. (2022) A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions. Material Design & Processing Communications 2022, pages 1-28.
Crossref
Crossref
Michael Hasieber, Moritz Kranz, Torsten Löhn, Michael Grätzel, Anton Zemlicka & Jean P Bergmann. (2022) Effect of friction stir welding tool hardness on wear behaviour in friction stir welding of AA-6060 T66. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236:6, pages 1333-1345.
Crossref
Crossref
Yoshihiko Hangai, Sohshi Eguro, Hironao Mitsugi & Yuichi Takahashi. (2022) Fabrication of aluminum foam by friction stir processing with zero-degree tilt angle前進角0度の摩擦攪拌法による発泡アルミニウムの作製. Journal of Japan Institute of Light Metals 72:5, pages 271-273.
Crossref
Crossref
Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee & Saad Parvez. (2022) Joining of aluminium matrix composites using friction stir welding: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236:5, pages 917-932.
Crossref
Crossref
N Rajesh Jesudoss Hynes, M Vivek Prabhu, P Shenbaga Velu, R Kumar, R Tharmaraj, Muhammad Umar Farooq & Catalin Iulian Pruncu. (2021) An experimental insight of friction stir welding of dissimilar AA 6061/Mg AZ 31 B joints. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 236:6-7, pages 787-797.
Crossref
Crossref
Yu-Qing Mao, Ping Yang, Li-Ming Ke, Yang Xu & Yu-Hua Chen. (2021) Microstructure Evolution and Recrystallization Behavior of Friction Stir Welded Thick Al–Mg–Zn–Cu alloys: Influence of Pin Centerline Deviation. Acta Metallurgica Sinica (English Letters) 35:5, pages 745-756.
Crossref
Crossref
Yuqi Jin, Xinyue Wang, Edward A. Fox, Zhiwu Xie, Arup Neogi, Rajiv S. Mishra & Tianhao Wang. (2022) Numerically Trained Ultrasound AI for Monitoring Tool Degradation. Advanced Intelligent Systems 4:5.
Crossref
Crossref
Eisha Khalid, Vasanth C. Shunmugasamy & Bilal Mansoor. (2022) Microstructure and tensile behavior of a Bobbin friction stir welded magnesium alloy. Materials Science and Engineering: A 840, pages 142861.
Crossref
Crossref
Hao Su, Ji Chen & Chuansong Wu. (2022) Effect of tool eccentricity on the periodic material flow in friction stir welding process. International Journal of Mechanical Sciences 220, pages 107164.
Crossref
Crossref
Ranamay Saha & Pankaj Biswas. (2022) Current status and development of external energy-assisted friction stir welding processes: a review. Welding in the World 66:3, pages 577-609.
Crossref
Crossref
Huijie Zhang, Shulei Sun, Xu Liu, Jianling Song & Xiaoguang Chen. (2021) Effect of Tool-Workpiece Relative Position on Microstructure and Mechanical Properties of Al-Cu Dissimilar Friction Stir Weld. Journal of Materials Engineering and Performance 31:3, pages 2457-2465.
Crossref
Crossref
N. Arun, M. Prakash, V. D. Sathvik & Chhavi Paramhans. A review of friction stir processing and its parameters. A review of friction stir processing and its parameters.
Rahul Kesharwani, Kishor Kumar Jha, Chiranjit Sarkar & Murshid Imam. (2022) Numerical and experimental analysis on friction stir welding of the dissimilar materials 6061-T6 AA and pure copper. Materials Today: Proceedings 65, pages 3132-3142.
Crossref
Crossref
Ashish Sharma, Zahid A. Khan & Arshad Noor Siddiquee. (2022) Review of various methods of keyhole removal in friction stir welding sheets and pipes. Materials Today: Proceedings 62, pages 404-409.
Crossref
Crossref
Ankur S. Vasava & Dinesh Singh. (2022) Microhardness and microstructure of AA7075-T651/graphene surface composite through FSP. Materials Today: Proceedings 58, pages 140-145.
Crossref
Crossref
Satish Kumar, Aishna Mahajan, Santosh Kumar & Harvinder Singh. (2022) Friction stir welding: Types, merits & demerits, applications, process variables & effect of tool pin profile. Materials Today: Proceedings 56, pages 3051-3057.
Crossref
Crossref
Pragya Saxena, Arunkumar Bongale & Satish Kumar. (2022) A review of friction stir processing in fabricating surface composites for process control and sensor data monitoring. Materials Today: Proceedings 50, pages 2099-2104.
Crossref
Crossref
Mohamed A. E. Omer, Maher Rashad, Ammar H. Elsheikh & Ezzat A. Showaib. (2021) A review on friction stir welding of thermoplastic materials: recent advances and progress. Welding in the World 66:1, pages 1-25.
Crossref
Crossref
Ritesh Jaiswal, Anil Kumar & Rajnish Singh. 2022. Recent Trends in Industrial and Production Engineering. Recent Trends in Industrial and Production Engineering
1
22
.
Elizabeth Hoyos & María Camila Serna. (2021) Basic Tool Design Guidelines for Friction Stir Welding of Aluminum Alloys. Metals 11:12, pages 2042.
Crossref
Crossref
Supat Chupradit, Dmitry Olegovich Bokov, Wanich Suksatan, Michał Landowski, Dariusz Fydrych, Mahmoud E. Abdullah & Hesamoddin Aghajani Derazkola. (2021) Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation. Materials 14:24, pages 7565.
Crossref
Crossref
Mahdi Kazemi & Amir Ghiasvand. (2021) Effect of cone angle of cylindrical pin in the SFSW and DFSW on mechanical properties of AA6061-T6 alloy. International Journal of Mechanical and Materials Engineering 16:1.
Crossref
Crossref
Ebrahim Seidi, Scott F. Miller & Blair E. Carlson. (2021) Friction Surfacing Deposition by Consumable Tools. Journal of Manufacturing Science and Engineering 143:12.
Crossref
Crossref
Rahul Kesharwani, Murshid Imam & Chiranjit Sarkar. (2021) Effect of Flat Probe on Local Heat Generation and Microstructural Evolution in Friction Stir Welding of 6061-T6 Aluminium Alloy. Transactions of the Indian Institute of Metals 74:12, pages 3185-3203.
Crossref
Crossref
Suppachai Chainarong, Rapeepan Pitakaso, Worapot Sirirak, Thanatkij Srichok, Surajet Khonjun, Kanchana Sethanan & Thai Sangthean. (2021) Multi-Objective Variable Neighborhood Strategy Adaptive Search for Tuning Optimal Parameters of SSM-ADC12 Aluminum Friction Stir Welding. Journal of Manufacturing and Materials Processing 5:4, pages 123.
Crossref
Crossref
Farzad Badkoobeh, Hossein Mostaan, Mahdi Rafiei, Hamid Reza Bakhsheshi-Rad & Filippo Berto. (2021) Friction Stir Welding/Processing of Mg-Based Alloys: A Critical Review on Advancements and Challenges. Materials 14:21, pages 6726.
Crossref
Crossref
Ankit Thakur, Varun Sharma & Shailendra Singh Bhadauria. (2021) Effect of tool tilt angle on weld joint strength and microstructural characterization of double-sided friction stir welding of AZ31B magnesium alloy. CIRP Journal of Manufacturing Science and Technology 35, pages 132-145.
Crossref
Crossref
John VICTOR CHRISTY, Abdel-Hamid ISMAIL MOURAD, Muhammad M. SHERIF & B. SHIVAMURTHY. (2021) Review of recent trends in friction stir welding process of aluminum alloys and aluminum metal matrix composites. Transactions of Nonferrous Metals Society of China 31:11, pages 3281-3309.
Crossref
Crossref
Joanna Hrabia-Wiśnios, Beata Leszczyńska-Madej, Marcin Madej & Aleksandra Węglowska. (2021) Characterization of microstructure and selected properties of SnSbCu alloy after FSP. The International Journal of Advanced Manufacturing Technology 117:1-2, pages 469-479.
Crossref
Crossref
Amir Ghiasvand, Mohammad Yavari, Jacek Tomków, John Grimaldo Guerrero, Hasan Kheradmandan, Aleksei Dorofeev, Shabbir Memon & Hesamoddin Derazkola. (2021) Investigation of Mechanical and Microstructural Properties of Welded Specimens of AA6061-T6 Alloy with Friction Stir Welding and Parallel-Friction Stir Welding Methods. Materials 14:20, pages 6003.
Crossref
Crossref
Leejon Choy, Seungkyung Kim, Jeonghun Park, Myungchang Kang & Dongwon Jung. (2021) Effect of Process Factors on Tensile Shear Load Using the Definitive Screening Design in Friction Stir Lap Welding of Aluminum–Steel with a Pipe Shape. Materials 14:19, pages 5787.
Crossref
Crossref
Aida Najmi Azar, Leila Nikzad & Azam Moosavi. (2021) Spark plasma sintering and mechanical properties of tungsten carbide in presence of Ni and Al2O3 binders. Materials Science and Engineering: A 826, pages 141968.
Crossref
Crossref
Alessandro Ralls, Ashish Kasar & Pradeep Menezes. (2021) Friction Stir Processing on the Tribological, Corrosion, and Erosion Properties of Steel: A Review. Journal of Manufacturing and Materials Processing 5:3, pages 97.
Crossref
Crossref
Neçar Merah, Mohammed Abdul Azeem, Hafiz M. Abubaker, Fadi Al-Badour, Jafar Albinmousa & Ahmad A. Sorour. (2021) Friction Stir Processing Influence on Microstructure, Mechanical, and Corrosion Behavior of Steels: A Review. Materials 14:17, pages 5023.
Crossref
Crossref
. (2021) Challenges and Solutions for Fabrication of Magnesium-Based Composites by Friction Stir Processing Technique. Nanosistemi, Nanomateriali, Nanotehnologii 19:3.
Crossref
Crossref
Hao Su & Chuansong Wu. (2021) Numerical Simulation for the Optimization of Polygonal Pin Profiles in Friction Stir Welding of Aluminum. Acta Metallurgica Sinica (English Letters) 34:8, pages 1065-1078.
Crossref
Crossref
Vijay Kumar Mahakur, Krushna Gouda, Promod Kumar Patowari & Sumit Bhowmik. (2021) A Review on Advancement in Friction Stir Welding Considering the Tool and Material Parameters. Arabian Journal for Science and Engineering 46:8, pages 7681-7697.
Crossref
Crossref
Renangi Sandeep, A. K. Jeevanantham, M. Manikandan, N. Arivazhagan & Szymon Tofil. (2021) Multi-Performance Optimization in Friction Stir Welding of AA6082/B4C Using Genetic Algorithm and Desirability Function Approach for Aircraft Wing Structures. Journal of Materials Engineering and Performance 30:8, pages 5845-5857.
Crossref
Crossref
Huangyu Gao & Hongjun Li. (2021) Friction additive manufacturing technology: A state-of-the-art survey. Advances in Mechanical Engineering 13:7, pages 168781402110344.
Crossref
Crossref
K Balachandar, R Jegadeeshwaran, J Lakshmipathi & D Saravanakumar. (2021) Friction Stir Welding Tool Condition Prediction Using Vibrational Analysis Through Machine Learning – A Review. Journal of Physics: Conference Series 1969:1, pages 012051.
Crossref
Crossref
Ashish Kumar Srivastava, Amit Rai Dixit, Manish Maurya, Ambuj Saxena, Nagendra Kumar Maurya, Shashi Prakash Dwivedi & Rajesh Bajaj. (2021) 20th Century Uninterrupted Growth in Friction Stir Processing of Lightweight Composites and Alloys. Materials Chemistry and Physics 266, pages 124572.
Crossref
Crossref
Mihai Octavian Crăcănel, Eduard Laurențiu Niţu & Daniela Monica Iordache. (2021) Friction Stir Welding of Steel Structures - A Brief Review. Key Engineering Materials 890, pages 105-119.
Crossref
Crossref
Abdulla Almazrouee, Khaled Al-Fadhalah & Saleh Alhajeri. (2021) A New Approach to Direct Friction Stir Processing for Fabricating Surface Composites. Crystals 11:6, pages 638.
Crossref
Crossref
Virendra Pratap Singh, Surendra Kumar Patel & Basil Kuriachen. (2021) Mechanical and microstructural properties evolutions of various alloys welded through cooling assisted friction-stir welding: A review. Intermetallics 133, pages 107122.
Crossref
Crossref
Zhiyong Yang, Yulin Wang, Joseph P. Domblesky, Wupeng Li & Jianmin Han. (2021) Development of a heat source model for friction stir welding tools considering probe geometry and tool/workpiece interface conditions. The International Journal of Advanced Manufacturing Technology 114:5-6, pages 1787-1802.
Crossref
Crossref
Rafael A. R. Giorjão, Julian A. Avila, Julian David Escobar, Victor Ferrinho Pereira, Ricardo Reppold Marinho, Marcelo Torres Piza Paes, Eduardo B. Fonseca, Alex M. S. Costa & Maysa Terada. (2021) The study of volumetric wearing of PCBN/W-Re composite tool during friction stir processing of pipeline steels (X70) plates. The International Journal of Advanced Manufacturing Technology 114:5-6, pages 1555-1564.
Crossref
Crossref
Shuja Ahmed, Mayank Verma & Probir Saha. (2021) Process responses during μFSW of AA6061-T6 under the influence of triple-spiral micro-grooves on shoulder end-surface. Journal of Materials Processing Technology 290, pages 116984.
Crossref
Crossref
Pooja Dwivedi, Arshad Noor Siddiquee & Sachin Maheshwari. (2021) Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art. Russian Journal of Non-Ferrous Metals 62:2, pages 212-225.
Crossref
Crossref
Vinayak Malik & Satish V Kailas. (2020) Understanding the effect of tool geometrical aspects on intensity of mixing and void formation in friction stir process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235:4, pages 744-757.
Crossref
Crossref
Fadi Al-Badour. (2021) Finite Element Modeling of Hybrid Friction Diffusion Welding of Tube–Tubesheet Joints. Journal of Pressure Vessel Technology 143:1.
Crossref
Crossref
D.G. Andrade, C. Leitão, N. Dialami, M. Chiumenti & D.M. Rodrigues. (2021) Analysis of contact conditions and its influence on strain rate and temperature in friction stir welding. International Journal of Mechanical Sciences 191, pages 106095.
Crossref
Crossref
Mohamed H. El‐Moayed, Ahmed Y. Shash, Mahmoud Abd Rabou & Mahmoud G. El‐Sherbiny. (2020) A detailed process design for conventional friction stir welding of aluminum alloys and an overview of related knowledge. Engineering Reports 3:2.
Crossref
Crossref
Akihiko IKUTA. (2021) Influence of Material Adhered to Welding Tool in Consideration of Shape of Cutting Tools on Friction Stir Spot Welds摩擦攪拌点接合継手におよぼす切削工具の形状を考慮した接合ツールへの付着物の影響. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 39:3, pages 190-199.
Crossref
Crossref
Leonardo Viana Dias & Cláudio Turani Vaz. (2021) União de Termoplásticos Pelo Processo Friction Stir Welding: Influência da Ferramenta e Parâmetros do Processo. Soldagem & Inspeção 26.
Crossref
Crossref
Hamid Reza Sadeghi, Kamran Amini & Farhad Gharavi. (2021) Effect of tool offset on microstructure and mechanical properties of dissimilar copper-brass friction stir welding. Metallurgical Research & Technology 118:3, pages 307.
Crossref
Crossref
Xiangchen Meng, Yongxian Huang, Jian Cao, Junjun Shen & Jorge F. dos Santos. (2021) Recent progress on control strategies for inherent issues in friction stir welding. Progress in Materials Science 115, pages 100706.
Crossref
Crossref
Ashish Kumar Srivastava, Nilesh Kumar & Amit Rai Dixit. (2021) Friction stir additive manufacturing – An innovative tool to enhance mechanical and microstructural properties. Materials Science and Engineering: B 263, pages 114832.
Crossref
Crossref
Nasir Khan, Sandeep Rathee, Manu Srivastava & Chaitanaya Sharma. (2021) Effect of tool rotational speed on weld quality of friction stir welded AA6061 alloys. Materials Today: Proceedings 47, pages 7203-7207.
Crossref
Crossref
Ashish M. Desai, Bharat C. Khatri, Vivek Patel & Harikrishna Rana. (2021) Friction stir welding of AZ31 magnesium alloy: A review. Materials Today: Proceedings 47, pages 6576-6584.
Crossref
Crossref
P.S. Gowthaman & B.A. Saravanan. (2021) Determination of weldability study on mechanical properties of dissimilar Al-alloys using Friction stir welding process. Materials Today: Proceedings 44, pages 206-212.
Crossref
Crossref
P. Mastanaiah, G. Madhusudhan Reddy & Abhay Sharma. 2021. Advanced Welding and Deforming. Advanced Welding and Deforming
151
177
.
Kannan Ravi Ramkumar & Isaac Dinaharan. 2021. Encyclopedia of Materials: Composites. Encyclopedia of Materials: Composites
679
701
.
Uttam Acharya, Barnik Saha Roy & Subhash Chandra Saha. (2020) On the Role of Tool Tilt Angle on Friction Stir Welding of Aluminum Matrix Composites. Silicon 13:1, pages 79-89.
Crossref
Crossref
Dhruv Shah & Vishvesh J. Badheka. 2021. Recent Advances in Mechanical Infrastructure. Recent Advances in Mechanical Infrastructure
13
36
.
Nisarg Patel, Farhan Khimani & Vishvesh J. Badheka. 2021. Recent Advances in Mechanical Infrastructure. Recent Advances in Mechanical Infrastructure
211
222
.
Jainesh Sarvaiya & Dinesh Singh. 2021. Recent Advances in Smart Manufacturing and Materials. Recent Advances in Smart Manufacturing and Materials
327
339
.
Pratap Singh & K. Hans Raj. 2021. Advances in Materials Processing and Manufacturing Applications. Advances in Materials Processing and Manufacturing Applications
431
439
.
Nadimul Faisal, Ömer Necati Cora, Muhammed Latif Bekci, Romana Ewa Śliwa, Yehuda Sternberg, Shashank Pant, Richard Degenhardt & Anil Prathuru. 2021. Structural Health Monitoring Damage Detection Systems for Aerospace. Structural Health Monitoring Damage Detection Systems for Aerospace
15
72
.
Ahmad Fatihi Azhar, Azman Ismail, Darulihsan Abdul Hamid, Fauziah Ab Rahman, Bakhtiar Ariff Baharudin, Megat Khalid Puteri Zarina & Achilles Enchangan Ulak Anak Mancha. 2021. Advanced Engineering for Processes and Technologies II. Advanced Engineering for Processes and Technologies II
271
277
.
Pooja Sarkar, Surjya Kanta Pal, Anandaroop Bhattacharya & Barbara Shollock. 2021. Welding Technology. Welding Technology
131
166
.
Atul Kumar Choudhary & Rahul Jain. 2021. Welding Technology. Welding Technology
41
90
.
Suman Kalyan Das, Suresh Gain & Prasanta Sahoo. 2021. Welding Technology. Welding Technology
1
39
.
Velaphi Msomi & Sipokazi Mabuwa. (2020) Experimental investigation of bending and tensile strength of friction stir processed TIG-welded AA5083-H111 joint. Engineering Research Express 2:4, pages 045005.
Crossref
Crossref
P Jayaseelan, S Rajesh Ruban, M Suresh, NS Gowtham & P Saravanan. (2020) Thermal analysis of pentagonal profiled friction stir welding tool using Ansys. IOP Conference Series: Materials Science and Engineering 993:1, pages 012144.
Crossref
Crossref
Yu G Lyudmirsky, V V Shchepkin & S S Assaulenko. (2020) Constructive and technological modernization of the aircraft beam. IOP Conference Series: Materials Science and Engineering 1001:1, pages 012013.
Crossref
Crossref
Surendra Kumar Patel, Virendra Pratap Singh, Barnik Saha Roy & Basil Kuriachen. (2020) Recent research progresses in Al-7075 based in-situ surface composite fabrication through friction stir processing: A review. Materials Science and Engineering: B 262, pages 114708.
Crossref
Crossref
Z. Nouri, R. Taghiabadi & M. Moazami-Goudarzi. (2020) Mechanical properties enhancement of cast Al-8.5Fe-1.3V-1.7Si (FVS0812) alloy by friction stir processing. Archives of Civil and Mechanical Engineering 20:4.
Crossref
Crossref
D. Bajaj, A. N. Siddiquee, A. K. Mukhopadhyay & N. Ali. (2020) The Effect of Tool Design on the Friction Stir Welding of Thick Aluminum Alloy AA6082-T651 Extruded Flats. Metallography, Microstructure, and Analysis 9:6, pages 841-855.
Crossref
Crossref
Lee-jon Choy, Seong-Hwan Park, Myung-Won Lee, Jae-Ha Park, Byeong-Joon Choi & Myungchang Kang. (2020) Tensile Strength Application Using a Definitive Screening Design Method in Friction Stir Welding of Dissimilar Cast Aluminum and High-Strength Steel with Pipe Shape. Journal of the Korean Society of Manufacturing Process Engineers 19:10, pages 98-104.
Crossref
Crossref
Junping Li, Yifu Shen, Wentao Hou & Yiming Qi. (2020) Friction stir welding of Ti-6Al-4V alloy: Friction tool, microstructure, and mechanical properties. Journal of Manufacturing Processes 58, pages 344-354.
Crossref
Crossref
Piotr Lacki, Wojciech Więckowski, Grzegorz Luty, Paweł Wieczorek & Maciej Motyka. (2020) Evaluation of Usefulness of AlCrN Coatings for Increased Life of Tools Used in Friction Stir Welding (FSW) of Sheet Aluminum Alloy. Materials 13:18, pages 4124.
Crossref
Crossref
D.G. Andrade, C. Leitão, N. Dialami, M. Chiumenti & D.M. Rodrigues. (2020) Modelling torque and temperature in friction stir welding of aluminium alloys. International Journal of Mechanical Sciences 182, pages 105725.
Crossref
Crossref
Austine D. D’Souza, Shrikantha S. Rao & Mervin A. Herbert. (2019) Evaluation of Microstructure, Hardness and Mechanical Properties of Friction Stir Welded Al–Ce–Si–Mg Aluminium Alloy. Metals and Materials International 26:9, pages 1394-1403.
Crossref
Crossref
Mahboubeh Momeni & Michel Guillot. (2020) Implementation of right angle friction stir welding (RAFSW) to assemble the side panels of truck box. The International Journal of Advanced Manufacturing Technology 110:1-2, pages 351-364.
Crossref
Crossref
Abhijit Sadhu, Debapriya Patra Karmakar, Omkar Mypati, Gopinath Muvvala, Surjya K. Pal & Ashish Kumar Nath. (2020) Performance of additive manufactured Stellite 6 tools in friction stir processing of CuCrZr sheet. Optics & Laser Technology 128, pages 106241.
Crossref
Crossref
Danial Ghahremani-Moghadam & Seyedmeysam Khaleghian. (2020) Microstructure and Mechanical Properties of Friction Stir Welded and Processed Joints with the Addition of Nanoparticles: A Review. Current Biochemical Engineering 6:2, pages 82-90.
Crossref
Crossref
Junping Li, Fujun Cao & Yifu Shen. (2020) Effect of Welding Parameters on Friction Stir Welded Ti–6Al–4V Joints: Temperature, Microstructure and Mechanical Properties. Metals 10:7, pages 940.
Crossref
Crossref
Munaf Hashim Ridha, Sohaib Khlil Alkhazraji & Isam Tareq Abdullah. (2020) Investigation of Friction Stir Welding of AA2024-T4 Thin Sheets for Industrial Applications. IOP Conference Series: Materials Science and Engineering 881:1, pages 012074.
Crossref
Crossref
Fadi Al-Badour & Abdelaziz Bazoune. (2020) Hybrid Friction Diffusion Bonding of Tube–Tubesheet Joint: A finite Element Model. Arabian Journal for Science and Engineering 45:7, pages 5541-5554.
Crossref
Crossref
Tadeusz Balawender & Piotr Myśliwiec. (2020) Experimental Analysis of FSW Process Forces. Advances in Manufacturing Science and Technology 44:2, pages 51-56.
Crossref
Crossref
Luqman Hakim Ahmad Shah, Abdelbaset R.H. Midawi, Scott Walbridge & Adrian Gerlich. (2020) Influence of tool eccentricity on the material flow and microstructural properties of AA6061 aluminum alloy friction stir welds. Journal of Alloys and Compounds 826, pages 154219.
Crossref
Crossref
Shaik Mozammil, Jimmy Karloopia, Raviraj Verma & P.K. Jha. (2020) Mechanical response of friction stir butt weld Al-4.5%Cu/TiB2/2.5p in situ composite: Statistical modelling and optimization. Journal of Alloys and Compounds 826, pages 154184.
Crossref
Crossref
O.P. Abolusoro, E.T. Akinlabi & S.V. Kailas. (2020) Impact of tool profile on mechanical behavior and material flow in friction stir welding of dissimilar aluminum alloys. Materialwissenschaft und Werkstofftechnik 51:6, pages 725-731.
Crossref
Crossref
Virendra Pratap Singh, Surendra Kumar Patel, Alok Ranjan & Basil Kuriachen. (2020) Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: a critical review. Journal of Materials Research and Technology 9:3, pages 6217-6256.
Crossref
Crossref
Hao Su, Long Xue & Chuansong Wu. (2020) Optimizing the tool pin with three flats in friction stir welding of aluminum alloy. The International Journal of Advanced Manufacturing Technology 108:3, pages 721-733.
Crossref
Crossref
Mahdi Alishavandi, Mahnam Ebadi, Sajjad Alishavandi & Amir Hossein Kokabi. (2020) Microstructural and mechanical characteristics of AA1050/mischmetal oxide in-situ hybrid surface nanocomposite by multi-pass friction stir processing. Surface and Coatings Technology 388, pages 125488.
Crossref
Crossref
Qi Qiao, Yishi Su, Zhiqiang Li, Qifeng Cui, Hong Yu, Qiubao Ouyang & Di Zhang. (2020) Effect of overlapping region on double-sided friction stir welded joint of 120 mm ultra-thick SiCp/Al composite plates. Materials Science and Engineering: A 782, pages 139238.
Crossref
Crossref
Shude Ji, Wei Hu, Zhongwei Ma, Qinghua Li & Xue Gong. (2019) Friction Stir Lap Welding of Mg/Ti Dissimilar Alloys Using a Slight Penetration Depth. JOM 72:4, pages 1589-1596.
Crossref
Crossref
Abhishek Ajri, Nitin Rohatgi & Yung C. Shin. (2020) Analysis of defect formation mechanisms and their effects on weld strength during friction stir welding of Al 6061-T6 via experiments and finite element modeling. The International Journal of Advanced Manufacturing Technology 107:11-12, pages 4621-4635.
Crossref
Crossref
Displaying 200 of 331 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list