Advanced search
Publication Cover
Materials Science and Technology Volume 5, 1989 - Issue 8
Journal homepage
118
Views
163
CrossRef citations to date
0
Altmetric
Proceedings of conference 'Alloy design and oxidation'

Role of reactive elements in alloy protection

D. P. Moon
Pages 754-764 | Published online: 02 Dec 2013

Citations (163)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (16)

E. A. A. Nilsson, L. Pettersson & M.-L. Antti. (2019) Mn, Si and Ti in cast stainless steel at elevated temperature. Ironmaking & Steelmaking 46:8, pages 731-741.
Read now
J. Tian, W. H. Yu, W. Tian, J. Zhao, Y. Q. Li & Y. Z. Liu. (2015) Effects of Y–Ce on wear behaviours of silicide coatings. Surface Engineering 31:4, pages 289-294.
Read now
D. Ghosh, S. K. Mukherjee, S. Das & S. K. Mitra. (2015) CeO2 based coating for high temperature oxidation protection. Surface Engineering 31:5, pages 323-328.
Read now
S. M. C. Fernandes & L. V. Ramanathan. (2006) Cyclic oxidation behaviour of rare earth oxide coated Fe–20Cr alloys. Surface Engineering 22:4, pages 248-252.
Read now
B. A. Pint, K. L. More & I. G. Wright. (2003) The use of two reactive elements to optimize oxidation performance of alumina-forming alloys. Materials at High Temperatures 20:3, pages 375-386.
Read now
p. Fox, J. Ritherdon & A. J. Papworth. (2000) The oxidation behaviour of an Fe,AI, Si alloy containing uranium as an impurity, oxidised for short times at high temperatures. Materials at High Temperatures 17:4, pages 429-438.
Read now
S.M.C. Fernandes & L.V. Ramanathan. (2000) Influence of rare earth oxide coatings on oxidation behaviour of Fe–20Cr alloys. Surface Engineering 16:4, pages 327-332.
Read now
D.J. Harris & J.H. Harding. (1999) The effect of impurities on vacancy migration at NiO grain boundaries. Radiation Effects and Defects in Solids 151:1-4, pages 305-309.
Read now
A. Jeutter & M. Schütze. (1999) The role of HCl-impurities in the environment and Y for the high temperature corrosion of CoNiCrAl(Y)-coatings on a Ni-base-superalloy under complex loading conditions. Materials at High Temperatures 16:2, pages 71-86.
Read now
B. A. Pint, P. F Tortorelli & I .G. Wright. (1999) Long-term oxidation performance of ingot-produced Fe3Al alloys. Materials at High Temperatures 16:1, pages 1-13.
Read now
H. E. Evans. (1995) Stress effects in high temperature oxidation of metals. International Materials Reviews 40:1, pages 1-40.
Read now
B. A. Pint, A. J. Garratt-Reed & L. W. Hobbs. (1995) The reactive element effect in commercial ODS FeCrAI alloys. Materials at High Temperatures 13:1, pages 3-16.
Read now
Bernard Pieraggi & Robert A. Rapp. (1994) Interfacial scaling reactions and the reactive element effect. Materials at High Temperatures 12:2-3, pages 229-235.
Read now
H. E. Evans. (1994) Modelling oxide spallation. Materials at High Temperatures 12:2-3, pages 219-227.
Read now
A. Strawbridge & P. Y. Hou. (1994) The role of reactive elements in oxide scale adhesion. Materials at High Temperatures 12:2-3, pages 177-181.
Read now
S. Seshan & Junichi Kaneko. (1992) Advanced materials through mechanical alloying-a retrospective review. Advanced Composite Materials 2:2, pages 153-170.
Read now

Articles from other publishers (147)

Xiao Peng, Yuanchao Huang, Xiaolan Wang & Yun Xie. (2023) Nanoparticles Application in Promoting the Growth of a More Protective Oxide Scale at High Temperatures. High Temperature Corrosion of Materials 100:5-6, pages 413-450.
Crossref
Yun Xie, Chang Su, Zongxiang Huang, Xiaoyong Shu, Limei You & Xiao Peng. (2023) Improvement of oxidation resistance and alumina regrowth ability of Ni-30Cr-5Al alloy without and with Y: Nanocrystallization effect. Corrosion Science 223, pages 111472.
Crossref
P.H. Mayrhofer, S. Kagerer, P. Polcik & A. Kirnbauer. (2023) Superior oxidation resistance of the chemically complex but structurally simple Ti-Al-Ta-Ce-Si-La-B-nitride. Materials & Design 227, pages 111722.
Crossref
Wenwei Luo, Qunying Huang, Lin Luo, Zunqi Xiao & Jie Wei. (2023) Effect of Ce on microstructure evolution of oxide scale for CLAM steel exposed to LBE containing 10−6 wt% oxygen at 500 ℃. Journal of Nuclear Materials 573, pages 154109.
Crossref
Haoran Wang, Hao Yu, Jiarui Liu, Sosuke Kondo, Nariaki Okubo & Ryuta Kasada. (2022) Characterization and corrosion behavior of Al-added high Mn ODS austenitic steels in oxygen-saturated lead–bismuth eutectic. Corrosion Science 209, pages 110818.
Crossref
R. Silva, D.J. Young, C.B. Martins Junior, G.S. Vacchi, C.A. Teixeira Alberto, A.M. de Sousa Malafaia, C. Pascal & C.A.D. Rovere. (2022) Role of cerium addition in enhancing the oxidation resistance of austenitic Fe-Mn-Si-Cr-Ni shape memory stainless steels at 800 °C: Microstructure and oxidation mechanism. Corrosion Science 209, pages 110788.
Crossref
Huimin Zhu, Shujiang Geng, Jun Zhang, Minghui Chen & Fuhui Wang. (2022) Oxidation and electrical behavior of Ni-Mn3O4-La2O3-coated SOFC interconnect steel. Ionics 28:12, pages 5525-5537.
Crossref
Mingluo Cheng, Minjie Liang & Haihong Liao. (2022) First principles study of Ni3Al/Ni6Ta2 interface and electronic properties. Vacuum 203, pages 111241.
Crossref
Mingyu Li, Jin Xie, Wei Gao, Zhaolin Zhan & Zulai Li. (2022) Effect of yttrium on the oxidation resistance and areaspecific resistance of MnCo2O4 coating. Surface and Coatings Technology 444, pages 128655.
Crossref
R.G. Ding, J.P. Zheng, Y.Z. Zhang, Y.C. Wang, S.Z. Li, X.W. Li, X.D. Hou, M.Q. Chu, L.Q. Li, S.Y. Zhang, C. Yuan & X.X. Gao. (2022) Microstructure and mechanical properties of direct laser deposited DD98 superalloy. Materials Science and Engineering: A 848, pages 143427.
Crossref
Shucai Zhang, Huabing Li, Zhouhua Jiang, Hao Feng, Zhejian Wen, Junyu Ren & Peide Han. (2022) Unveiling the mechanism of yttrium significantly improving high-temperature oxidation resistance of super-austenitic stainless steel S32654. Journal of Materials Science & Technology 115, pages 103-114.
Crossref
Jian Li, Guangming Cao, Yuchen Jiang, Xuzhao Ma, Chenggang Li & Zhenyu Liu. (2022) Effects of Zr Distribution on High‐Temperature Oxidation Resistance of a FeCrAlZr Alloy. steel research international 93:6.
Crossref
Yimeng Chen, Katherine P. Rice, Ty J. Prosa, Roger C. Reed & Emmanuelle A. Marquis. (2022) Al 2 O 3 Grain Boundary Segregation in a Thermal Barrier Coating on a Ni-Based Superalloy . Microscopy and Microanalysis, pages 1-10.
Crossref
Baisen Chen, Junsheng Meng, Zhihui Chen, Chenfan Hao, Chengshuo Li, Xiaoping Shi & Yuebo Zhou. (2022) Preparation and oxidation behavior of novel CeO 2 /Y 2 O 3 -modified aluminide coatings on Ni using sol–gel derived/pack cementation process . Metallurgical Research & Technology 119:5, pages 513.
Crossref
Łukasz Mazur, Justyna Ignaczak, Maciej Bik, Sebastian Molin, Maciej Sitarz, Aleksander Gil & Tomasz Brylewski. (2022) Effectiveness of a dual surface modification of metallic interconnects for application in energy conversion devices. International Journal of Hydrogen Energy 47:9, pages 6295-6311.
Crossref
Huimin Zhu, Shujiang Geng, Gang Chen & Fuhui Wang. (2022) Ni-Mn3O4-CeO2 composite coating on ferritic stainless steel interconnects. Corrosion Science 194, pages 109932.
Crossref
Yong Zhang, Yutao Zhang, Caihong Wu, Yiting Yang, Qiang Li & Yongnan Chen. (2021) Oxidation behavior and electrical properties of metal interconnects with Ce-doped Ni–Mn spinel coatings. Ceramics International.
Crossref
J. Muñoz-Saldaña, A. Valencia-Ramirez, L.A. Castillo-Perea, S. Díaz-De la Torre, L.A. Caceres-Diaz, J.M. Alvarado Orozco, A.L. Giraldo Betancur & U. Schulz. (2021) Oxidation behavior of dense Yttrium doped B2-NiAl bulk material fabricated by ball milling self-propagating high-temperature synthesis and densified by spark plasma sintering. Surface and Coatings Technology 421, pages 127448.
Crossref
Yuhang Li, Fanping Meng, Fangfang Ge & Feng Huang. (2021) Improved oxidation resistance through an in-situ formed diffusion barrier: Oxidation behavior of amorphous multi-component FeCrAlMoSiY-coated Zr in high-temperature steam. Corrosion Science 189, pages 109566.
Crossref
David A. Shifler & Robert B. Pond, Jr., Jr.. 2021. Failure Analysis and Prevention. Failure Analysis and Prevention 581 614 .
S. Li, M.M. Xu, C.Y. Zhang, Y.S. Niu, Z.B. Bao, S.L. Zhu & F.H. Wang. (2021) Co-doping effect of Hf and Y on improving cyclic oxidation behavior of (Ni,Pt)Al coating at 1150 °C. Corrosion Science 178, pages 109093.
Crossref
Jiahua He, Xiping Guo, Yanqiang Qiao & Fa Luo. (2020) A novel Zr-Y modified silicide coating on Nb-Si based alloys as protection against oxidation and hot corrosion. Corrosion Science 177, pages 108948.
Crossref
Hong-Zhi Yang, Jian-Peng Zou, Qian Shi, Di Wang, Ming-Jiang Dai, Song-Sheng Lin, Xuanxuan Chen, Wei Wang & Xiao-Ping Xia. (2020) Comprehensive study on the microstructure evolution and oxidation resistance performance of NiCoCrAlYTa coating during isothermal oxidation at High temperature. Corrosion Science 175, pages 108889.
Crossref
Jian Li, Guangming Cao, Hao Wang, Weina Zhang, Chenggang Li, Guodong Wang & Zhenyu Liu. (2020) Size effects of Y-enriched intermetallic precipitates in Fe-20Cr-5Al-0.25Y alloy on the spallation resistance of thermally grown α-Al2O3 scales. Corrosion Science 174, pages 108796.
Crossref
Y. F. Yang, P. Ren, Z. B. Bao, S. L. Zhu, F. H. Wang & W. Li. (2020) Microstructure and cyclic oxidation of a Hf-doped (Ni,Pt)Al coating for single-crystal superalloys. Journal of Materials Science 55:25, pages 11687-11700.
Crossref
Hailang Liu, Yiping Huang, Xiaoyu Wang & Ruxue Lu. (2020) Effect of CeO 2 on High-Temperature Oxidation Performance of Electron Beam Cladding NiCoCrAlY Coating on Ni-Based Alloy . Advances in Materials Science and Engineering 2020, pages 1-6.
Crossref
Jiayi Xiang, Faqin Xie, Xiangqing Wu, Lianyang Chen & Meijuan Dong. (2020) Aluminization of a Si–Y co-deposition coating to protect a Ti2AlNb based alloy from high temperature oxidation. Vacuum 174, pages 109190.
Crossref
Yongdong Wang, Yupeng Zhang, Gang Liang & Qilong Ding. (2020) Low temperature formation of aluminide coatings on the electrodeposited nanocrystalline Ni and its oxidation resistance with La2O3/CeO2 nanoparticle dispersion. Vacuum 173, pages 109148.
Crossref
Ping-Jiong Yang & Wei-Zhong Han. (2020) Enhanced oxidation resistance in refractory niobium by surface Ti+/Si+ implantation. Corrosion Science 163, pages 108297.
Crossref
Muhammad Taqi Mehran, Tae-Hun Kim, Muhammad Zubair Khan, Seung-Bok Lee, Tak-Hyoung Lim & Rak-Hyun Song. (2019) Highly durable nano-oxide dispersed ferritic stainless steel interconnects for intermediate temperature solid oxide fuel cells. Journal of Power Sources 439, pages 227109.
Crossref
Xiaoli Li, Shangming He, Jianping Liang & Xingtai Zhou. (2019) High-Temperature Oxidation Behavior and Oxide Scale Structure of Yttrium-Modified Ni–16Mo–7Cr–4Fe Superalloy at 1273 K. Oxidation of Metals 92:1-2, pages 67-88.
Crossref
A. Gil, O. Kryshtal, T. Brylewski & A. Czyrska-Filemonowicz. (2019) Characterization of a Cr2O3 scale formed on chromium with implanted yttrium ions by advanced electron microscopy. Surface and Coatings Technology 368, pages 232-242.
Crossref
Yongdong Wang, Jixiao Wang, Haiting Hu, Junsheng Meng & Xia Zhao. (2018) Effect of Y2O3 content in the pack mixtures on the cyclic-oxidation of Y2O3-modified low temperature aluminide coatings on 309 stainless steel. Vacuum.
Crossref
J. Muñoz Saldaña, U. Schulz, G.C. Mondragón Rodríguez, L.A. Caceres-Diaz & H. Lau. (2018) Microstructure and lifetime of Hf or Zr doped sputtered NiAlCr bond coat/7YSZ EB-PVD TBC systems. Surface and Coatings Technology 335, pages 41-51.
Crossref
Zhen Yang, Jin-tao Lu, Zheng Yang, Yan Li, Yong Yuan & Yue-feng Gu. (2017) Oxidation behavior of a new wrought Ni-30Fe-20Cr based alloy at 750 °C in pure steam and the effects of alloyed yttrium. Corrosion Science 125, pages 106-113.
Crossref
Muhammad Taqi Mehran, Muhammad Shirjeel Khan, Jung-Won Lee, Rak-Hyun Song, Seung-Bok Lee, Jong-Won Lee, Tak-Hyoung Lim & Seok-Joo Park. (2017) Nano-CeO 2 and -LaCrO 3 dispersed ferritic stainless steels as potential interconnect materials for solid oxide fuel cells. Journal of Alloys and Compounds 709, pages 453-463.
Crossref
X. Wei, X. Peng, X. Wang & Z. Dong. (2017) Development of growth and thermal stresses in NiO scale on nanocrystalline Ni without and with dispersion of CeO 2 nanoparticles. Corrosion Science 118, pages 60-68.
Crossref
Thomas Gheno, Bi-Cheng Zhou, Austin Ross, Xuan Liu, Greta Lindwall, Zi-Kui Liu & Brian Gleeson. (2017) A Thermodynamic Approach to Guide Reactive Element Doping: Hf Additions to NiCrAl. Oxidation of Metals 87:3-4, pages 297-310.
Crossref
David A. Shifler. (2017) 2016 Frank Newman Speller Award: Understanding High-Temperature Corrosion—Key to Energy Efficiency? . CORROSION 73:2, pages 103-124.
Crossref
Xiaolei Dong, Xiao Song, Shiliu Yin, Mandar M. Shirolkar, Ming Li & Haiqian Wang. (2017) Probing the oxidation kinetics of small permalloy particles. Journal of Solid State Chemistry 246, pages 309-318.
Crossref
Zhang Haijun & Sun Jianfeng. (2017) Fabrication and Cyclic Oxidation of Y 2 O 3 /CeO 2 -Modified Low Temperature Aluminide Coatings. Rare Metal Materials and Engineering 46:2, pages 301-306.
Crossref
Y.F. Yang, C.Y. Jiang, H.R. Yao, Z.B. Bao, S.L. Zhu & F.H. Wang. (2016) Preparation and enhanced oxidation performance of a Hf-doped single-phase Pt-modified aluminide coating. Corrosion Science 113, pages 17-25.
Crossref
Xueyuan Gong, Yonghong Yang, Yue Ma, Hui Peng & Hongbo Guo. (2016) Microstructures and mechanical properties of β-NiAlHf coated single crystal superalloy. Materials Science and Engineering: A 673, pages 39-46.
Crossref
Xu Jiawen, Liu Ailian, Wang Shuhua, Zhou Yuebo, Zhang He, Zhou Chang-hai & Cai Wei. (2016) Effect of Y Addition on Isothermal Oxidation Behavior of Ti50Ni50 Shape Memory Alloy at 700 °C. Rare Metal Materials and Engineering 45:9, pages 2246-2252.
Crossref
David J Jorgensen, Akane Suzuki, Don M Lipkin & Tresa M Pollock. 2016. Superalloys 2016. Superalloys 2016 131 140 .
Ahmed Umar Munawar, Uwe Schulz & Muhammad Shahid. (2016) Microstructure and lifetime of EB-PVD TBCs with Hf-doped bond coat and Gd-zirconate ceramic top coat on CMSX-4 substrates. Surface and Coatings Technology 299, pages 104-112.
Crossref
X. Wang, X. Peng, X. Tan & F. Wang. (2016) The reactive element effect of ceria particle dispersion on alumina growth: A model based on microstructural observations. Scientific Reports 6:1.
Crossref
D. Ghosh, S. Mukherjee, S. Das & S. K. Mitra. (2016) Effect of yttria(Y2O3) coating for high temperature oxidation resistance of 9Cr-1Mo steel. Protection of Metals and Physical Chemistry of Surfaces 52:4, pages 737-743.
Crossref
Xu Jiawen, Liu Ailian, Wang Yongdong & Zhou Yuebo. (2016) Effect of Rare Earth Element Yttrium on the Isothermal Oxidation Behavior of Aluminide Coatings on Ti-Ni Shape Memory Alloys. Rare Metal Materials and Engineering 45:6, pages 1413-1418.
Crossref
Suresh Telu, Rahul Mitra & Shyamal Kumar Pabi. (2015) Effect of Y2O3 Addition on Oxidation Behavior of W-Cr Alloys. Metallurgical and Materials Transactions A 46:12, pages 5909-5919.
Crossref
Xuan Li, Xiping Guo & Yanqiang Qiao. (2015) Research on Oxidation Resistant ZrSi2–NbSi2 Bilayer Coatings for an Nb–Ti–Si–Cr Based Ultrahigh Temperature Alloy. Oxidation of Metals 84:3-4, pages 447-462.
Crossref
Liangliang Wei, Hui Peng, Fang Jia, Lei Zheng, Shengkai Gong & Hongbo Guo. (2015) Cyclic oxidation behavior of Hf/Zr co-doped EB-PVD β-NiAl coatings at 1200 °C. Surface and Coatings Technology 276, pages 721-725.
Crossref
Wang Yongdong & Li Bairu. (2015) Influence of Superficial Y2O3 Coatings on High-Temperature Oxidation of Ni. Rare Metal Materials and Engineering 44:6, pages 1331-1334.
Crossref
D. Ghosh, S. Mukherjee & S. Das. (2015) Ceria (CeO2) based coating for high temperature corrosion protection of 9Cr-1 Mo steel. Protection of Metals and Physical Chemistry of Surfaces 51:3, pages 441-447.
Crossref
Xuan Li, Xiping Guo & Yanqiang Qiao. (2014) Structure and Oxidation Behavior of Zr–Y Modified Silicide Coatings Prepared on an Nb–Ti–Si–Cr Based Ultrahigh Temperature Alloy. Oxidation of Metals 83:3-4, pages 253-271.
Crossref
Wenhai YU, Jin TIAN, Wei TIAN, Jun ZHAO, Yongquan LI & Yanzheng LIU. (2015) Study of yttrium and cerium on the oxidation resistance of silicide coatings prepared on Ti-6Al-4V alloy by pack-cementation process. Journal of Rare Earths 33:2, pages 221-226.
Crossref
Kang Yuan, Ru Lin Peng, Xin-Hai Li, Sten Johansson & Yan-Dong Wang. (2015) Some aspects of elemental behaviour in HVOF MCrAlY coatings in high-temperature oxidation. Surface and Coatings Technology 261, pages 86-101.
Crossref
Jun-sheng MENG & Ze-sheng JI. (2014) Effect of La2O3/CeO2 particle size on high-temperature oxidation resistance of electrodeposited Ni–La2O3/CeO2 composites. Transactions of Nonferrous Metals Society of China 24:11, pages 3571-3577.
Crossref
Jun-sheng MENG & Ze-sheng JI. (2014) Effect of different fillers on oxidation behavior of low-temperature chromizing coating. Transactions of Nonferrous Metals Society of China 24:6, pages 1785-1790.
Crossref
Hugo F. Lopez & Haiying Zhang. (2014) The Effect of Particle Size on the Oxidation Resistance of a Nanoceria-Coated 304 Stainless Steel. Metallurgical and Materials Transactions A 45:4, pages 2297-2308.
Crossref
Hugo F. Lopez, Humberto Mendoza & Ben Church. (2013) High-Temperature Oxidation Resistance of a Nanoceria Spray-Coated 316L Stainless Steel Under Short-Term Air Exposure. Metallurgical and Materials Transactions A 45:3, pages 1362-1370.
Crossref
Guo Ying Zhang, Ran Chu, Hui Zhang & Chun Ming Liu. (2013) The Oxidation Mechanism of FeCrAl Alloy Added with Rare Earth Y from First-Principle Study. Advanced Materials Research 853, pages 192-197.
Crossref
Jian-feng SUN, Yue-bo ZHOU & Hai-jun ZHANG. (2013) Preparation and oxidation behavior of a novel CeO2-modified chromizing coating. Transactions of Nonferrous Metals Society of China 23:5, pages 1375-1381.
Crossref
Ziqiang Dong, Weixing Chen, Wenyue Zheng & Dave Guzonas. (2012) Corrosion behavior of chromium oxide based ceramics in supercritical water (SCW) environments. Corrosion Science 65, pages 461-471.
Crossref
Y.B. Zhou & H.J. Zhang. (2012) Preparation and oxidation of an Al2O3-modified aluminide coating. Vacuum 86:9, pages 1353-1357.
Crossref
H. Zhang, X. Peng & F. Wang. (2012) Fabrication of an oxidation-resistant β-NiAl coating on γ-TiAl. Surface and Coatings Technology 206:8-9, pages 2454-2458.
Crossref
Jingbo Yan, Yimin Gao, Yudi Shen, Fang Yang, Dawei Yi, Zhaozhong Ye, Long Liang & Yingqian Du. (2011) Effect of yttrium on the oxide scale adherence of pre-oxidized silicon-containing heat-resistant alloy. Corrosion Science 53:11, pages 3588-3595.
Crossref
C. Xu, X. Peng, L. Zheng & F. Wang. (2011) Erosion?corrosion in a laboratory-scale coal-firing FBC of various aluminized coatings prepared by low-temperature pack cementation. Surface and Coatings Technology 205:19, pages 4540-4546.
Crossref
H. Hattendorf. (2011) Influence of minor additions on the emissivity of the oxide scale of FeCrAlY alloys during resistance heating. Materials and Corrosion 62:6, pages 481-489.
Crossref
X. Peng, J. Yan, L. Zheng & F. Wang. (2011) Oxidation of a novel CeO 2 ‐dispersed chromium coating in wet air . Materials and Corrosion 62:6, pages 514-520.
Crossref
X. Peng, Y. Guan, Z. Dong, C. Xu & F. Wang. (2011) A fundamental aspect of the growth process of alumina scale on a metal with dispersion of CeO2 nanoparticles. Corrosion Science 53:5, pages 1954-1959.
Crossref
Y.-D. Zhang, C. Zhang, H. Lan, P.Y. Hou & Z.-G. Yang. (2011) Improvement of the oxidation resistance of Tribaloy T-800 alloy by the additions of yttrium and aluminium. Corrosion Science 53:3, pages 1035-1043.
Crossref
X. Peng. 2011. Thermal Barrier Coatings. Thermal Barrier Coatings 53 74 .
Jing Chong Zhang & Yue Bo Zhou. (2010) Development and Oxidation of RexOy-Modified Aluminide Coating. Advanced Materials Research 142, pages 274-278.
Crossref
S.J. Hong, G.H. Hwang, W.K. Han, K.S. Lee & S.G. Kang. (2010) Effect of zirconium addition on cyclic oxidation behavior of platinum-modified aluminide coating on nickel-based superalloy. Intermetallics 18:5, pages 864-870.
Crossref
X. Peng, J. Yan, Z. Dong, C. Xu & F. Wang. (2010) Discontinuous oxidation and erosion-oxidation of a CeO2-dispersion-strengthened chromium coating. Corrosion Science 52:5, pages 1863-1873.
Crossref
C. Xu, X. Peng & F. Wang. (2010) Cyclic oxidation of an ultrafine-grained and CeO2-dispersed δ-Ni2Al3 coating. Corrosion Science 52:3, pages 740-747.
Crossref
B.A. Pint. 2010. Shreir's Corrosion. Shreir's Corrosion 606 645 .
Y.B. Zhou, G.G. Zhao, H.J. Zhang, Y.C. Zhang & B.Y. Qian. (2009) Effect of CeO2 on the microstructure and isothermal oxidation of Ni–Al alloy coatings transformed from electrodeposited Ni–Al films at 800°C. Vacuum 83:11, pages 1333-1339.
Crossref
X. Yang, X. Peng, C. Xu & F. Wang. (2009) Electrochemical Assembly of Ni–xCr–yAl Nanocomposites with Excellent High-Temperature Oxidation Resistance. Journal of The Electrochemical Society 156:5, pages C167.
Crossref
Yue-bo ZHOU, Hai-jun ZHANG & Yong-dong WANG. (2008) Effect of Y2O3 on microstructure and oxidation of chromizing coating. Transactions of Nonferrous Metals Society of China 18:5, pages 1122-1127.
Crossref
Huikai Cheng, Shen J. Dillon, Hugo S. Caram, Jeffrey M. Rickman, Helen M. Chan & Martin P. Harmer. (2008) The Effect of Yttrium on Oxygen Grain‐Boundary Transport in Polycrystalline Alumina Measured Using Ni Marker Particles. Journal of the American Ceramic Society 91:6, pages 2002-2008.
Crossref
Yue-bo ZHOU, Hong-yu CHEN, Hai-jun ZHANG & Yong-dong WANG. (2008) Oxidation of Al2O3-dispersion chromizing coating by pack-cementation at 800 °C. Transactions of Nonferrous Metals Society of China 18:3, pages 598-602.
Crossref
Y.B. Zhou, H. Chen, H. Zhang & Y. Wang. (2008) Preparation and oxidation of an Y2O3-dispersed chromizing coating by pack cementation at 800°C. Vacuum 82:8, pages 748-753.
Crossref
Yue-bo ZHOU, Hai-jun ZHANG & Zhen-ting WANG. (2008) Effect of Y2O3 on microstructure and oxidation of γ -Ni+γ′ -Ni3Al coatings transformed from electrodeposited Ni-Al films at 1 000 °C. Transactions of Nonferrous Metals Society of China 18:2, pages 297-302.
Crossref
W. Zhou, Y.G. Zhao, W. Li, X.L. Mei & Q.C. Jiang. (2008) The in situ synthesis and wear performance of a metal matrix composite coating reinforced with TiC–TiB2 particulates, formed on Ti–6Al–4V alloy by a low oxygen partial pressure fusing technique. Surface and Coatings Technology 202:9, pages 1652-1660.
Crossref
X. Peng & F. Wang. 2008. Developments in High Temperature Corrosion and Protection of Materials. Developments in High Temperature Corrosion and Protection of Materials 456 475 .
B.A. Pint. 2008. Developments in High Temperature Corrosion and Protection of Materials. Developments in High Temperature Corrosion and Protection of Materials 398 432 .
Nima Shaigan, Douglas G. Ivey & Weixing Chen. (2008) Electrodeposition of Ni∕LaCrO[sub 3] Composite Coatings for Solid Oxide Fuel Cell Stainless Steel Interconnect Applications. Journal of The Electrochemical Society 155:4, pages D278.
Crossref
X. Peng, J. Yan, C. Xu & F. Wang. (2007) Oxidation at 900 °C of the Chromized Coatings on A3 Carbon Steel with the Electrodeposition Pretreatment of Ni or Ni-CeO2 Film. Metallurgical and Materials Transactions A 39:1, pages 119-129.
Crossref
W. Zhou, Y.G. Zhao, W. Li, B. Tian, S.W. Hu & Q.D. Qin. (2007) Oxidation behavior of the Y2O3-modified aluminide coating on Ti–6Al–4V alloy. Materials Science and Engineering: A 458:1-2, pages 34-38.
Crossref
J. Liu, Yong Ho Sohn & K.S. Murphy. (2007) Microstructural Evolution of Durable Thermal Barrier Coatings with Hf and/or Y Modified CMSX-4<sup>TM</sup> Superalloy Substrates. Materials Science Forum 539-543, pages 1206-1211.
Crossref
Iulian Radu & D.Y. Li. (2007) The wear performance of yttrium-modified Stellite 712 at elevated temperatures. Tribology International 40:2, pages 254-265.
Crossref
Lin Geng, Young-Sang Na & Nho-Kwang Park. (2007) Oxidation behavior of Alloy 718 at a high temperature. Materials & Design 28:3, pages 978-981.
Crossref
. 2007. Pulvermetallurgie. Pulvermetallurgie 291 315 .
Marina Fuser Pillis, Edval Gonçalves de Araújo & Lalgudi Venkataraman Ramanathan. (2006) Effect of rare earth oxide additions on oxidation behavior of AISI 304L stainless steel. Materials Research 9:4, pages 375-379.
Crossref
P.Eh. Hovsepian, C. Reinhard & A.P. Ehiasarian. (2006) CrAlYN/CrN superlattice coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique. Surface and Coatings Technology 201:7, pages 4105-4110.
Crossref
M.F. Pillis, Edval G. de Araújo & Lalgudi Venkataraman Ramanathan. (2006) Effect of Addition of Rare Earth Oxide Concentrates on Oxidation Resistance of AISI 304L. Materials Science Forum 530-531, pages 99-104.
Crossref
Stela Maria Cristina Fernandes & Lalgudi Venkataraman Ramanathan. (2006) Effect of surface deposited rare earth oxide gel characteristics on cyclic oxidation behavior of Fe20-Cr alloys. Materials Research 9:2, pages 199-203.
Crossref
Wei Zhang, Zhi-kang Fan, Peng-fei Hu, Yong-qiang Long, Hua Liu & Jiu-ba Wen. (2006) Effect of Rare Earth on Void Band of Diffusion Layer and Properties of Aluminized Steel. Journal of Iron and Steel Research International 13:5, pages 60-64.
Crossref
T. J. Nijdam, C. Kwakernaak & W. G. Sloof. (2006) The effects of alloy microstructure refinement on the short-term thermal oxidation of NiCoCrAlY alloys. Metallurgical and Materials Transactions A 37:3, pages 683-693.
Crossref
S. Rajendran Pillai,. (2005) Life History of Oxide Scale in Metals and Alloys. Corrosion Reviews 23:4-5-6, pages 277-328.
Crossref
Q.M. Wang, Y.J. Tang, M.H. Guo, P.L. Ke, J. Gong, C. Sun & L.S. Wen. (2005) Thermal shock cycling behavior of NiCoCrAlYSiB coatings on Ni-base superalloys. Materials Science and Engineering: A 406:1-2, pages 337-349.
Crossref
P.Eh. Hovsepian, D.B. Lewis, Q. Luo, W.-D. Münz, P.H. Mayrhofer, C. Mitterer, Z. Zhou & W.M. Rainforth. (2005) TiAlN based nanoscale multilayer coatings designed to adapt their tribological properties at elevated temperatures. Thin Solid Films 485:1-2, pages 160-168.
Crossref
X Peng & F Wang. (2003) Morphologic investigation and growth of the alumina scale on magnetron-sputtered CoCrAl NCs with and without yttrium. Corrosion Science 45:10, pages 2293-2306.
Crossref
S. Pahlavanyali, A. Sabour & M. Hirbod. (2003) The hot corrosion behaviour of HVOF sprayed MCrAlX coatings under Na 2 SO 4 (+NaCl) salt films . Materials and Corrosion 54:9, pages 687-693.
Crossref
R. Guerrero, M.H. Farias & L. Cota-Araiza. (2002) Corrosion study of a Zn–22Al–2Cu alloy coated with Y2O3. Surface and Coatings Technology 154:2-3, pages 218-222.
Crossref
X Peng, T Li & W.P Pan. (2001) Oxidation of a La2O3-modified aluminide coating. Scripta Materialia 44:7, pages 1033-1038.
Crossref
C.-H Xu, W Gao & S Li. (2001) Oxidation behaviour of FeAl intermetallics – the effect of Y on the scale spallation resistance. Corrosion Science 43:4, pages 671-688.
Crossref
X. Peng, T. Li, W. Wu & W.P. Pan. (2001) Effect of La2O3 particles on microstructure and cracking-resistance of NiO scale on electrodeposited nickel films. Materials Science and Engineering: A 298:1-2, pages 100-109.
Crossref
Naoki Oishi, Tatsuru Namikawa & Yohtaro Yamazaki. (2000) Oxidation behavior of an La-coated chromia-forming alloy and the electrical property of oxide scales. Surface and Coatings Technology 132:1, pages 58-64.
Crossref
D.J Harris, J.H Harding & G.W Watson. (2000) Computer simulation of the reactive element effect in NiO grain boundaries. Acta Materialia 48:12, pages 3039-3048.
Crossref
E. C. Dickey, B. A. Pint, K. B. Alexander & I. G. Wright. (2011) Oxidation behavior of platinum–aluminum alloys and the effect of Zr doping. Journal of Materials Research 14:12, pages 4531-4540.
Crossref
P Castello, F.H Stott & F Gesmundo. (1999) Yttrium-promoted selective oxidation of aluminium in the oxidation at 1100°C of an eutectic Ni–Al–Cr3C2 alloy. Corrosion Science 41:5, pages 901-918.
Crossref
R Balasubramaniam. (1999) Environmental effects in iron aluminides. Bulletin of Materials Science 22:3, pages 571-579.
Crossref
Akihiro SAITO, Isao SAEKI & Ryusaburo FURUICHI. (1999) Effect of Lanthanum Hydroxide Coating on the High Temperature Oxidation of SUS430 Stainless Steel. Tetsu-to-Hagane 85:11, pages 814-820.
Crossref
P.F. Tortorelli & K. Natesan. (1998) Critical factors affecting the high-temperature corrosion performance of iron aluminides. Materials Science and Engineering: A 258:1-2, pages 115-125.
Crossref
S.D. Norris. (1998) The degradation of dissimilar explosively welded joints due to thermal ageing. International Journal of Pressure Vessels and Piping 75:10, pages 735-748.
Crossref
W. Brandl, D. Toma & H.J. Grabke. (1998) The characteristics of alumina scales formed on HVOF-sprayed MCrAlY coatings. Surface and Coatings Technology 108-109, pages 10-15.
Crossref
You Wang, Radovan Kovacevic & Jiajun Liu. (1998) Mechanism of surface modification of CeO2 in laser remelted alloy spray coatings. Wear 221:1, pages 47-53.
Crossref
B.A Pint, I.G Wright, W.Y Lee, Y Zhang, K Prüßner & K.B Alexander. (1998) Substrate and bond coat compositions: factors affecting alumina scale adhesion. Materials Science and Engineering: A 245:2, pages 201-211.
Crossref
Bruce A. Pint, Anthony J. Garratt‐Reed & Linn W. Hobbs. (2005) Possible Role of the Oxygen Potential Gradient in Enhancing Diffusion of Foreign Ions on α‐Al 2 O 3 Grain Boundaries . Journal of the American Ceramic Society 81:2, pages 305-314.
Crossref
B. A. Pint, K. B. Alexander, O. R. Monteiro & I. G. Brown. (2011) An Oxygen Potential Gradient as a Possible Diffusion Driving Force. MRS Proceedings 527.
Crossref
R.O. Srinivasan & J.J. Lannutti. (1996) Aluminum and reactive element additions to chromium steel fibers for oxidation resistance in surface combustion. Surface and Coatings Technology 86-87, pages 54-60.
Crossref
K. M. N. Prasanna, A. S. Khanna, Ramesh Chandra & W. J. Quadakkers. (1996) Effect of?-alumina formation on the growth kinetics of alumina-forming superalloys. Oxidation of Metals 46:5-6, pages 465-480.
Crossref
C.T. Liu, P.F. Tortorelli, J.A. Horton & C.A. Carmichael. (1996) Effects of alloy additions on the microstructure and properties of CrCr2Nb alloys. Materials Science and Engineering: A 214:1-2, pages 23-32.
Crossref
S. C. Choi, H. J. Cho & D. B. Lee. (1996) Effect of Cr, Co, and Ti additions on the high-temperature oxidation behavior of Ni3Al. Oxidation of Metals 46:1-2, pages 109-127.
Crossref
K. Nagarathnam & K. Komvopoulos. (1996) Microstructural analysis and oxidation behavior of laser-processed Fe-Cr-AI-Y alloy coatings. Metallurgical and Materials Transactions A 27:2, pages 381-390.
Crossref
P.Y. Hou & J. Stringer. (1995) The effect of reactive element additions on the selective oxidation, growth and adhesion of chromia scales. Materials Science and Engineering: A 202:1-2, pages 1-10.
Crossref
Bernard Pieraggi, Robert A. Rapp & John P. Hirth. (1995) Role of interface structure and interfacial defects in oxide scale growth. Oxidation of Metals 44:1-2, pages 63-79.
Crossref
Xinying Lu, Rizhang Zhu & Yedong He. (1995) Reactive-element effect of electrodeposited Y2O3 oxide films on the oxidation of Fe?25Cr and Fe?25Cr?10Al alloys. Oxidation of Metals 43:3-4, pages 217-236.
Crossref
John P. Hirth, Bernard Pieraggi & Robert A. Rapp. (1995) The role of interface dislocations and ledges as sources/sinks for point defects in scaling reactions. Acta Metallurgica et Materialia 43:3, pages 1065-1073.
Crossref
H.M. Tawancy, N.M. Abbas & A. Bennett. (1994) Role of Y during high temperature oxidation of an M-Cr-Al-Y coating on an Ni-base superalloy. Surface and Coatings Technology 68-69, pages 10-16.
Crossref
B.A. Pint. (2013) Limitations on the Use of Surface Doping for Improving High-Temperature Oxidation Resistance. MRS Bulletin 19:10, pages 26-30.
Crossref
G. Bonnet, M. Lachkar, J.P. Larpin & J.C. Colson. (1994) Organometallic chemical vapor deposition of rare earth oxide thin films. Application for steel protection against high temperature oxidation. Solid State Ionics 72, pages 344-348.
Crossref
M.F. Stroosnijder, V. Guttmann, H. Buscail & J.H.W. de Wit. (1994) The effect of pre-oxidation and the influence of deformation on the corrosion behaviour of two heat resistant steels in a sulphur-oxygen-carbon bearing environment. Corrosion Science 36:2, pages 207-219.
Crossref
B. A. Pint & L. W. Hobbs. (2011) The Cyclic Oxidation behavior of Oxide-Dispersed β-NiAl. MRS Proceedings 364.
Crossref
J. Jedlínski, B. Cohat & G. Borchardt. (1994) The Influence of Yttrium on the Oxidation Behaviour of Fe-19Cr-5Al Alloy at High Temperatures: I. Oxidation Resistance. High Temperature Materials and Processes 13:3, pages 241-258.
Crossref
Hirobumi Inoue, Naoto Sasaki & Yasuo Omori. 1994. Advanced Materials '93. Advanced Materials '93 301 304 .
Jerzy Jedliński. (1993) General aspects of the reactive element effect. Corrosion Science 35:5-8, pages 863-869.
Crossref
M. Siegers, H. J. Grabke & H. Viefhaus. (1993) AES- and LEED-investigations of the oxidation behaviour of Fe-19,5 Cr-4,5 Al single crystals. Fresenius' Journal of Analytical Chemistry 346:1-3, pages 269-274.
Crossref
A. Rahmel & M. Sch�tze. (1992) Mechanical aspects of the rare-earth effect. Oxidation of Metals 38:3-4, pages 255-266.
Crossref
E. Roszczynialska, J. Jedlinski, A. Gil & M. Danielewski. (2004) The influence of yttrium on the Oxidation behaviour of Ni‐23Co‐19Cr‐12Al alloy at high temperatures. Materials and Corrosion 43:3, pages 124-130.
Crossref
V. A. C. Haanappel, T. Fransen, B. Geerdink, P. J. Gellings & M. F. Stroosnijder. (1991) The properties of protective oxide scales containing cerium on alloy 800H in oxidizing and oxidizing/sulphidizing environments. Oxidation of Metals 35:5-6, pages 405-414.
Crossref
W.J. Quadakkers, J. Jedlinski, K. Schmidt, M. Krašovec, G. Borchardt & H. Nickel. (1991) The effect of implanted yttrium on the growth and adherence of alumina scales on Fe-20Cr-5Al. Applied Surface Science 47:3, pages 261-272.
Crossref
M.F. Stroosnijder, V. Guttmann & J.H.W. de Wit. (1991) The corrosion behaviour of a 32Ni-27Cr-0.07Ce steel under simulated coal gasification conditions in the stress-free and stressed state. Corrosion Science 32:2, pages 151-166.
Crossref
D. Wiemer, H. J. Grabke & H. Viefhaus. (1991) Investigation on the influence of sulfur segregation on the adherence of protective oxide layers on high temperature materials. Fresenius' Journal of Analytical Chemistry 341:5-6, pages 402-405.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.