24
Views
24
CrossRef citations to date
0
Altmetric
Articles

Die Filling Characteristics of Metal Powders

Pages 183-194 | Published online: 19 Jul 2013

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (3)

Paul G. Tallon & Dmitri V. Malakhov. (2021) Properties of a powder metallurgy low-alloy steel with varying fractions of large iron particles. Canadian Metallurgical Quarterly 60:4, pages 249-264.
Read now
X. Xie & V. M. Puri. (2007) Powder Deposition in Three Parallel-Oriented Dies of Different Shapes. Particulate Science and Technology 25:6, pages 507-518.
Read now
X. Xie & V. M. Puri. (2006) Uniformity of Powder Die Filling Using a Feed Shoe: A Review. Particulate Science and Technology 24:4, pages 411-426.
Read now

Articles from other publishers (21)

Yasumasa Ando, Takashi Watanabe, Takahiro Orikasa & Satoru Tomita. (2023) Structural Differences Between Hot Air-Dried and Freeze-Dried Two-Spotted Cricket (Gryllus bimaculatus), House Cricket (Acheta domesticus), and Silkworm (Bombyx mori) Larvae and Their Effect on Powder Properties After Grinding. Food and Bioprocess Technology.
Crossref
Yasumasa Ando & Daisuke Nei. (2022) Comparison of Potato Void Structures Dried by Air-Drying, Freeze-Drying, and Microwave-Vacuum-Drying, and the Physical Properties of Powders After Grinding. Food and Bioprocess Technology 16:2, pages 447-458.
Crossref
Varun Kumar Ojha, Serena Schiano, Chuan-Yu Wu, Václav Snášel & Ajith Abraham. (2016) Predictive modeling of die filling of the pharmaceutical granules using the flexible neural tree. Neural Computing and Applications 29:7, pages 467-481.
Crossref
Paul Beiss. 2003. Ullmann's Encyclopedia of Industrial Chemistry. Ullmann's Encyclopedia of Industrial Chemistry 1 49 .
Joon-Phil Choi, Gi-Hun Shin, Hak-Sung LeeDong-Yeol YangSangsun YangChang-Woo LeeMathieu Brochu & Ji-Hun Yu. (2017) Evaluation of Powder Layer Density for the Selective Laser Melting (SLM) Process. MATERIALS TRANSACTIONS 58:2, pages 294-297.
Crossref
Y. Guo & C.-Y. Wu. 2017. Predictive Modeling of Pharmaceutical Unit Operations. Predictive Modeling of Pharmaceutical Unit Operations 253 271 .
Chunlei Pei & Chuan-Yu Wu. 2017. Engineering Crystallography: From Molecule to Crystal to Functional Form. Engineering Crystallography: From Molecule to Crystal to Functional Form 437 449 .
Joon-Phil Choi, Geon-Yong Lee, Jun-Il Song, Joon-Chul Yun & Jai-Sung Lee. (2014) Improvement of Powder Properties and Chemical Homogeneity of Partially Alloyed Iron Powder by a Nanopowder Process. MATERIALS TRANSACTIONS 55:8, pages 1356-1362.
Crossref
Emmanuel Nkem Nwose, Chunlei Pei & Chuan-Yu Wu. (2012) Modelling die filling with charged particles using DEM/CFD. Particuology 10:2, pages 229-235.
Crossref
Y. Guo, C.-Y. Wu & C. Thornton. (2011) The effects of air and particle density difference on segregation of powder mixtures during die filling. Chemical Engineering Science 66:4, pages 661-673.
Crossref
Masatoshi Akashi, Tsukasa Otani, Atsuko Shimosaka, Yoshiyuki Shirakawa & Jusuke Hidaka. (2011) Analysis of Filling Characteristics of Granular Particles into Small Die Cavity Using Powder Simulation. Journal of the Society of Powder Technology, Japan 48:1, pages 4-11.
Crossref
Masatoshi Akashi, Tsukasa Otani, Atsuko Shimosaka, Yoshiyuki Shirakawa & Jusuke Hidaka. (2010) Estimation of particle size distribution from cross-sectional particle diameter on the cutting plane. Advanced Powder Technology 21:6, pages 676-680.
Crossref
Rafael Mendez, Fernando Muzzio & Carlos Velazquez. (2010) Study of the effects of feed frames on powder blend properties during the filling of tablet press dies. Powder Technology 200:3, pages 105-116.
Crossref
C. Bierwisch, T. Kraft, H. Riedel & M. Moseler. (2009) Three-dimensional discrete element models for the granular statics and dynamics of powders in cavity filling. Journal of the Mechanics and Physics of Solids 57:1, pages 10-31.
Crossref
Paul Beiss & Stefan Lindlohr. (2008) Zusammenhang zwischen der Höchstwertstatistik der Porosität und der Schwingfestigkeit von Sinterstahl. Materials Testing 50:3, pages 126-132.
Crossref
Gijsbertus de With. 2006. Materials Science and Technology. Materials Science and Technology.
Chuan-Yu Wu & Alan C.F. Cocks. (2006) Numerical and experimental investigations of the flow of powder into a confined space. Mechanics of Materials 38:4, pages 304-324.
Crossref
Chuan-Yu Wu, Alan C.F. Cocks, Olivier T. Gillia & David A. Thompson. (2003) Experimental and numerical investigations of powder transfer. Powder Technology 138:2-3, pages 216-228.
Crossref
Chuan-Yu Wu, Luiza Dihoru & Alan C.F. Cocks. (2003) The flow of powder into simple and stepped dies. Powder Technology 134:1-2, pages 24-39.
Crossref
G Jiang, G.S Daehn, J.J Lannutti, Y Fu & R.H Wagoner. (2001) Effects of lubrication and aspect ratio on the consolidation of metal matrix composites under cyclic pressure. Acta Materialia 49:8, pages 1471-1477.
Crossref
Consuelo Margarita Kong & John J. Lannutti. (2004) Effect of Agglomerate Size Distribution on Loose Packing Fraction. Journal of the American Ceramic Society 83:9, pages 2183-2188.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.