Citations (271)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (41)
Shirley Savetlana, T. Gough & A. Kelly. (2023) Properties of polybutylene succinate and polybutylene succinate -polycaprolactone based composite reinforced with coconut shell particles. Composite Interfaces 30:10, pages 1119-1144.
Read now
Read now
Said Awad, Tamer Hamouda, Mohamad Midani, Evina Katsou & Mizi Fan. (2023) Polylactic Acid (PLA) Reinforced with Date Palm Sheath Fiber Bio-Composites: Evaluation of Fiber Density, Geometry, and Content on the Physical and Mechanical Properties. Journal of Natural Fibers 20:1.
Read now
Read now
Mahaboob Subhani Shaik & Hariharan S Subramanian. (2022) An Experimental Investigation on Low-velocity Impact Response of Abaca/Epoxy Bio-composite. Journal of Natural Fibers 19:13, pages 6977-6992.
Read now
Read now
Gabriel Torrente-Prato, María Daza-Gutiérrez, Alis Pataquiva-Mateus & Juan P. Morales-Arias. (2022) Study of Elastic Behavior of Polylactic Acid with Yanchama Fibers Composite Simulated as Elastic Orthotropic Material. Journal of Natural Fibers 19:13, pages 5741-5754.
Read now
Read now
Karthick Rasu & Anbumalar Veerabathiran. (2022) A Review on Drilling of Natural and Synthetic Fiber Reinforced Polymer Composites: 1992 - 2021. Journal of Natural Fibers 19:16, pages 15100-15115.
Read now
Read now
Yutaka Kawahara, Yuki Torige, Natsumi Kurihara, Hiroaki Ohnishi & Masaki Yamamoto. (2022) Totally Bio-Based, Recyclable Wood Filler-Feather Resin Composite. Journal of Natural Fibers 19:15, pages 10679-10692.
Read now
Read now
Lalit Ranakoti, Pawan Kumar Rakesh & Brijesh Gangil. (2022) Effect of Tasar Silk Waste on the Mechanical Properties of Jute/Grewia Optiva Fibers Reinforced Epoxy Laminates. Journal of Natural Fibers 19:15, pages 10462-10474.
Read now
Read now
Saker Messaoui, Karama Elfehri Borchani, Lassaad Ghali, Noamen Guermazi, Nader Haddar & Slah Msahli. (2022) Effect of a New Composition Ratio and of a New Chemical Treatment on Natural Alfa Fiber/polypropylene Composites Manufacturing and Their Mechanical Properties. Journal of Natural Fibers 19:15, pages 10126-10141.
Read now
Read now
P. Sivasubramanian, K Mayandi, C. Santulli, A. Alavudeen & N. Rajini. (2022) Effect of Fiber Length on Curing and Mechanical Behavior of Pineapple Leaf Fiber (PALF) Reinforced Natural Rubber Composites. Journal of Natural Fibers 19:11, pages 4326-4337.
Read now
Read now
Alexis Morinval & Luc Averous. (2022) Systems Based on Biobased Thermoplastics: From Bioresources to Biodegradable Packaging Applications. Polymer Reviews 62:4, pages 653-721.
Read now
Read now
Sabih Ovalı & Erhan Sancak. (2022) Investigation of Mechanical Properties of Jute Fiber Reinforced Low Density Polyethylene Composites. Journal of Natural Fibers 19:8, pages 3109-3126.
Read now
Read now
Yutaka Kawahara, Natsumi Kurihara & Masaki Yamamoto. (2022) Totally Bio-based Kenaf Fiber-Feather Resin Green Composite. Journal of Macromolecular Science, Part B 61:6, pages 741-748.
Read now
Read now
Surajit Sengupta. (2022) Development of Jute Fabric for Jute-Polyester Biocomposite considering Structure–Property Relationship. Journal of Natural Fibers 19:5, pages 1864-1878.
Read now
Read now
Suryani Salim, Teuku Rihayat, Shafira Riskina & Aida Safitri. (2021) Physical and mechanical properties of bamboo/flax fibre reinforced epoxy composite water absorption behaviour and high-temperature conditions. Plastics, Rubber and Composites 50:8, pages 415-424.
Read now
Read now
Yutaka Kawahara, Hiroaki Ohnishi, Seijiro Asakawa & Hiroyuki Wakizaka. (2021) Recrystallization Behavior and Mechanical, and Carbonizing Properties of Feather Keratin Resin Sheets Produced by Hot-Compression Molding. Journal of Macromolecular Science, Part B 60:8, pages 571-588.
Read now
Read now
Lalta Prasad, Aruna Saini & Virendra Kumar. (2021) Mechanical Performance of Jute and Basalt Fiber Geo-grid-Reinforced Epoxy Hybrid Composite Material. Journal of Natural Fibers 18:5, pages 694-704.
Read now
Read now
Vinayagamoorthy R.. (2020) Trends and Challenges on the Development of Hybridized Natural Fiber Composites. Journal of Natural Fibers 17:12, pages 1757-1774.
Read now
Read now
Yutaka Kawahara, Takuma Ohtani & Makoto Nakamura. (2020) Direct Resinification of Two (1→3)-β-D-Glucans, Curdlan and Paramylon, via Hot-Press Compression Molding. Journal of Macromolecular Science, Part B 59:10, pages 635-647.
Read now
Read now
K. Saravanan & C. Prakash. (2020) Effect of Processing Conditions on Flexural Strength Properties of Chicken Feather Fibre (CFF) and Its Hybrid Composites with Polypropylene Resin. Journal of Natural Fibers 17:7, pages 933-944.
Read now
Read now
Yutaka Kawahara, Tomohiro Yamamoto, Kiyoshi Yamamoto, Yoshimitsu Ikeda & Yukihiro Nishikawa. (2020) Application of β-sheet proteins as a compatibilizer in injection molding of kenaf core/polypropylene composites. Journal of Natural Fibers 17:4, pages 609-621.
Read now
Read now
A. Arun Premnath. (2019) Impact of surface treatment on the mechanical properties of sisal and jute reinforced with epoxy resin natural fiber hybrid composites. Journal of Natural Fibers 16:5, pages 718-728.
Read now
Read now
Joefreim A. Delicano. (2018) A review on abaca fiber reinforced composites. Composite Interfaces 25:12, pages 1039-1066.
Read now
Read now
Zhanying Sun, Fengqiang Yi & Xiongyan Zhao. (2018) Effect of grafting generations of poly(amidoamine) dendrimer from the sisal fiber surface on the mechanical properties of composites. Journal of Natural Fibers 15:6, pages 896-905.
Read now
Read now
Hendri Hestiawan, Jamasri & Kusmono. (2018) Effect of chemical treatments on tensile properties and interfacial shear strength of unsaturated polyester/fan palm fibers. Journal of Natural Fibers 15:5, pages 762-775.
Read now
Read now
Yutaka Kawahara & Shinji Hirai. (2018) Resinification Behavior of Regenerated Feather Keratin Powder. Journal of Natural Fibers 15:5, pages 707-716.
Read now
Read now
Jai Inder Preet Singh, Sehijpal Singh & Vikas Dhawan. (2018) Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites. Journal of Natural Fibers 15:5, pages 687-696.
Read now
Read now
R. Ramasamy, K. Obi Reddy & A. Varada Rajulu. (2018) Extraction and Characterization of Calotropis gigantea Bast Fibers as Novel Reinforcement for Composites Materials. Journal of Natural Fibers 15:4, pages 527-538.
Read now
Read now
Hamid Souri & Debes Bhattacharyya. (2018) Electrical conductivity of the graphene nanoplatelets coated natural and synthetic fibres using electrophoretic deposition technique. International Journal of Smart and Nano Materials 9:3, pages 167-183.
Read now
Read now
Ganesh Jogur, Ashraf Nawaz Khan, Apurba Das, Puneet Mahajan & R. Alagirusamy. (2018) Impact properties of thermoplastic composites. Textile Progress 50:3, pages 109-183.
Read now
Read now
Thingujam Jackson Singh, Sutanu Samanta & Hemanta Singh. (2017) Influence of Kevlar Hybridization on Dielectric and Conductivity of Bamboo Fiber Reinforced Epoxy Composite. Journal of Natural Fibers 14:6, pages 837-845.
Read now
Read now
Yutaka Kawahara, Yo Saito, Kiyoshi Yamamoto, Yoshimitsu Ikeda & Yukihiro Nishikawa. (2017) Study on the Application of Kenaf Core as a Composite Reinforcement: Injection Molding of Kenaf Core/Poly(l-lactide) Compounds. Journal of Natural Fibers 14:5, pages 666-677.
Read now
Read now
Heow Pueh Lee, Benson Mun Pun Ng, Abhishek Vishwanath Rammohan & Le Quan Ngoc Tran. (2017) An Investigation of the Sound Absorption Properties of Flax/Epoxy Composites Compared with Glass/Epoxy Composites. Journal of Natural Fibers 14:1, pages 71-77.
Read now
Read now
Othman Laban & Elsadig Mahdi. (2016) Energy Absorption Capability of Cotton Fiber/Epoxy Composite Square and Rectangular Tubes. Journal of Natural Fibers 13:6, pages 726-736.
Read now
Read now
A. V. Singhal, K. Debnath, I. Singh & B. S. S. Daniel. (2016) Critical Parameters Affecting Mechanical Behavior of Natural Fiber Reinforced Plastics. Journal of Natural Fibers 13:6, pages 640-650.
Read now
Read now
K. Palanikumar, M. Ramesh & K. Hemachandra Reddy. (2016) Experimental Investigation on the Mechanical Properties of Green Hybrid Sisal and Glass Fiber Reinforced Polymer Composites. Journal of Natural Fibers 13:3, pages 321-331.
Read now
Read now
Umit Tayfun, Mehmet Dogan & Erdal Bayramli. (2016) Influence of Surface Modifications of Flax Fiber on Mechanical and Flow Properties of Thermoplastic Polyurethane Based Eco-Composites. Journal of Natural Fibers 13:3, pages 309-320.
Read now
Read now
Umit Halis Erdoğan, Yasemin Seki, Gözde Aydoğdu, Bengi Kutlu & Aysun Akşit. (2016) Effect of Different Surface Treatments on the Properties of Jute. Journal of Natural Fibers 13:2, pages 158-171.
Read now
Read now
Pramendra
Kumar Bajpai, Dharmendra Meena, Shrey Vatsa & Inderdeep Singh. (2013) Tensile Behavior of Nettle Fiber Composites Exposed to Various Environments. Journal of Natural Fibers 10:3, pages 244-256.
Read now
Read now
Priyanka & Sanjay Palsule. (2013) Banana fiber/chemically functionalized polypropylene composites with in-situ fiber/matrix interfacial adhesion by Palsule process. Composite Interfaces 20:5, pages 309-329.
Read now
Read now
Aznizam
Abu Bakar, Kee
Wee Cheng & Siti
Waqina Abdul Ghani. (2012) Flexural and Impact Properties of Poly (Vinyl Chloride) and Acrylic-Impact Modified Poly (Vinyl Chloride) Composite Filled with Poly (Methyl Methacrylate) Grafted to Oil Palm Empty Fruit Bunches. International Journal of Polymeric Materials and Polymeric Biomaterials 61:4, pages 263-275.
Read now
Read now
Debora Puglia, Andrea Terenzi, SilviaE. Barbosa & JoséM. Kenny. (2008) Polypropylene-natural fibre composites. Analysis of fibre structure modification during compounding and its influence on the final properties. Composite Interfaces 15:2-3, pages 111-129.
Read now
Read now
Articles from other publishers (230)
Siddhartha Arya, Ritesh Kumar & Shakti Chauhan. (2024) Preparation and characterization of woven jute fabric layered composite by using bamboo fiber reinforced polymers as resin matrix. Construction and Building Materials 411, pages 134343.
Crossref
Crossref
Md Mahmudur Rahman, Mohd Maniruzzaman & Mst Sarmina Yeasmin. (2023) A state-of-the-art review focusing on the significant techniques for naturally available fibers as reinforcement in sustainable bio-composites: Extraction, processing, purification, modification, as well as characterization study. Results in Engineering 20, pages 101511.
Crossref
Crossref
Anil Dhanola. (2023) A comprehensive overview on tribo-mechanical characteristics of hybrid plant fiber–based biocomposites. Emergent Materials 6:6, pages 1707-1726.
Crossref
Crossref
Wenjie Wang, Yunpeng Zhang, Zonglai Mo, Nawawi Chouw, Krishnan Jayaraman & Zhao-dong Xu. (2023) A critical review on the properties of natural fibre reinforced concrete composites subjected to impact loading. Journal of Building Engineering 77, pages 107497.
Crossref
Crossref
Taweechai Amornsakchai, Sorn Duangsuwan, Karine Mougin & Kheng Lim Goh. (2023) Comparative Study of Flax and Pineapple Leaf Fiber Reinforced Poly(butylene succinate): Effect of Fiber Content on Mechanical Properties. Polymers 15:18, pages 3691.
Crossref
Crossref
Harsh Sharma, Ajay Kumar, Sravendra Rana, Nanda Gopal Sahoo, Muhammad Jamil, Rajeev Kumar, Shubham Sharma, Changhe Li, Abhinav Kumar, Sayed M. Eldin & Mohamed Abbas. (2023) Critical review on advancements on the fiber-reinforced composites: Role of fiber/matrix modification on the performance of the fibrous composites. Journal of Materials Research and Technology 26, pages 2975-3002.
Crossref
Crossref
Aju Jo Sankarathil, R. Raja, S. J. Vijay, Sabitha Jannet & Rittin Abraham Kurien. (2023) Structural, Thermal and Elemental Investigations in Epoxy Polymer Composites Reinforced with NaOH-Treated Short Areca Nut Fibers. Transactions of the Indian Institute of Metals 76:9, pages 2525-2533.
Crossref
Crossref
Yutaka KAWAHARA, Yingshao CHEN & Masaki YAMAMOTO. (2023) Tensile Behavior of the Hardwood Fiber-Curdlan Resin Green Composite Produced via the Direct-Resinification Process. Journal of Textile Engineering 69:4, pages 59-63.
Crossref
Crossref
Faust Seculi, Fernando Julián, Joan Llorens, Francisco X. Espinach, Pere Mutjé & Quim Tarrés. (2023) Methodologies to Evaluate the Micromechanics Flexural Strength Properties of Natural-Fiber-Reinforced Composites: The Case of Abaca-Fiber-Reinforced Bio Polyethylene Composites. Polymers 15:14, pages 3137.
Crossref
Crossref
M. K. Marichelvam, K. Kandakodeeswaran & P. Manimaran. (2023) Investigation of Mechanical and Morphological analysis of natural fiber hybrid composites. Biomass Conversion and Biorefinery.
Crossref
Crossref
Mohammed Mohammed, Anwar Ja'afar Mohamad Jawad, Aeshah M. Mohammed, Jawad K. Oleiwi, Tijjani Adam, Azlin F. Osman, Omar S. Dahham, Bashir O. Betar, Subash C.B. Gopinath & Mustafa Jaafar. (2023) Challenges and advancement in water absorption of natural fiber-reinforced polymer composites. Polymer Testing 124, pages 108083.
Crossref
Crossref
Sahib dua, Hardik Khatri, Jesuarockiam Naveen, M. Jawaid, K. Jayakrishna, M.N.F. Norrrahim & Ahmad Rashedi. (2023) Potential of natural fiber based polymeric composites for cleaner automotive component production -a comprehensive review. Journal of Materials Research and Technology 25, pages 1086-1104.
Crossref
Crossref
Ravi Yerraiahgarahalli Venkataravanappa, Avinash Lakshmikanthan, Natesan Kapilan, Manjunath Patel Gowdru Chandrashekarappa, Oguzhan Der & Ali Ercetin. (2023) Physico-Mechanical Property Evaluation and Morphology Study of Moisture-Treated Hemp–Banana Natural-Fiber-Reinforced Green Composites. Journal of Composites Science 7:7, pages 266.
Crossref
Crossref
Satheeskumar Navaratnam, Kajanan Selvaranjan, Darshana Jayasooriya, Pathmanathan Rajeev & Jay Sanjayan. (2023) Applications of natural and synthetic fiber reinforced polymer in infrastructure: A suitability assessment. Journal of Building Engineering 66, pages 105835.
Crossref
Crossref
A. Karthik, Jafrey Daniel James D, V. Vijayan, Zubair Ahmad, S. Rajkumar, Shubham Sharma, Kanta Prasad Sharma, Rajesh Singh, Changhe Li & Sayed M. Eldin. (2023) Study on the physicomechanical, fracture-deformation, interface-adhesion, and water-absorption properties of twill fabric cotton-bamboo/epoxy composites. Journal of Materials Research and Technology 24, pages 8429-8442.
Crossref
Crossref
Raj Vardhan Patel, Anshul Yadav & Jerzy Winczek. (2023) Physical, Mechanical, and Thermal Properties of Natural Fiber-Reinforced Epoxy Composites for Construction and Automotive Applications. Applied Sciences 13:8, pages 5126.
Crossref
Crossref
Maria Kurańska, Mariusz Ptak, Elżbieta Malewska, Aleksander Prociak, Mateusz Barczewski, Mateusz Dymek, Fábio A. O. Fernandes, Ricardo Alves de Sousa, Krzysztof Polaczek, Karolina Studniarz & Katarzyna Uram. (2023) Cork Porous Biocomposites with Polyurethane Matrix Modified with Polyol Based on Used Cooking Oil. Materials 16:8, pages 3032.
Crossref
Crossref
Jean-Baptiste Souppez & Geethanjali Pavar. (2023) Recycled Carbon Fibre Composites in Automotive Manufacturing. International Journal of Automotive Manufacturing and Materials, pages 12.
Crossref
Crossref
M. Chithirai Pon Selvan, I. Sankar, I. Siva & Yu Dong. (2023) Synergistic effect of fiber surface treatment and nanoclays on the damping behaviors of polyester composites reinforced with palmyra fruit fibers. Polymer Bulletin.
Crossref
Crossref
Mahmuda Akter, Md. Haris Uddin & Habibur Rahman Anik. (2023) Plant fiber-reinforced polymer composites: a review on modification, fabrication, properties, and applications. Polymer Bulletin.
Crossref
Crossref
Renjith Rajan Pillai & Vinoy Thomas. (2023) Plasma Surface Engineering of Natural and Sustainable Polymeric Derivatives and Their Potential Applications. Polymers 15:2, pages 400.
Crossref
Crossref
Mohammed Khalifa, Alexander Berndt, Shamitha C., Stefan Pichler, Herfried Lammer & Guenter Wuzella. (2022) Hybridization effect of cellulose paper and postcuring conditions on the mechanical properties of flax fiber reinforced epoxy biocomposite. Journal of Applied Polymer Science 140:2.
Crossref
Crossref
Anatoly Prokopiev, Regina Salimgaraeva & Ruslan Safin. (2023) Solid wood processing with acetic acid when creating elements of automotive interior. E3S Web of Conferences 371, pages 04024.
Crossref
Crossref
Jun Young Choi, Ji Ho Jeon, Jang Hyeon Lyu, Jungwoo Park, Geun Young Kim, Suk Young Chey, Ying-Jun Quan, Binayak Bhandari, B. Gangadhara Prusty & Sung-Hoon Ahn. (2022) Current Applications and Development of Composite Manufacturing Processes for Future Mobility. International Journal of Precision Engineering and Manufacturing-Green Technology 10:1, pages 269-291.
Crossref
Crossref
Sodagudi Francis XavierS.F. Xavier. 2022. Thermoplastic Polymer Composites. Thermoplastic Polymer Composites
787
886
.
Sodagudi Francis XavierS.F. Xavier. 2022. Thermoplastic Polymer Composites. Thermoplastic Polymer Composites
185
367
.
Tony Hadibarata, Winda Umarie, Bieby Voijant Tangahu, Putri Ramadhany & Gilang Ananda Putra. (2022) Green technology of natural fiber reinforced bio-composites as alternative sustainable product. Environmental and Toxicology Management 2:2, pages 21-25.
Crossref
Crossref
Oumayma Oulidi, Asmae Nakkabi, Fatima Boukhlifi, Mohamed Fahim, Hassane Lgaz, Awad A. Alrashdi & Noureddine Elmoualij. (2022) Peanut shell from agricultural wastes as a sustainable filler for polyamide biocomposites fabrication. Journal of King Saud University - Science 34:6, pages 102148.
Crossref
Crossref
M. R. M. Asyraf, M. Rafidah, S. Ebadi, A. Azrina & M. R. Razman. (2022) Mechanical properties of sugar palm lignocellulosic fibre reinforced polymer composites: a review. Cellulose 29:12, pages 6493-6516.
Crossref
Crossref
Zuzana Mitaľová, František Botko, Radoslav Vandžura, Juliána Litecká, Dušan Mitaľ & Vladimír Simkulet. (2022) Machining of Wood Plastic Composite Using AWJ Technology with Controlled Output Quality. Machines 10:7, pages 566.
Crossref
Crossref
Nurul Ain Maidin, Salit Mohd Sapuan, Mastura Mohammad Taha & Zuhri Mohamed Yusoff Mohd. (2022) Constructing a framework for selecting natural fibres as reinforcements composites based on grey relational analysis. Physical Sciences Reviews 0:0.
Crossref
Crossref
Naresh Kumar, L. Natrayan, G. Kasirajan, S. Kaliappan, M. D. Raj Kamal, Pravin P. Patil & Muse Degefe Chewaka. (2022) Development of Novel Bio-mulberry-Reinforced Polyacrylonitrile (PAN) Fibre Organic Brake Friction Composite Materials. Bioinorganic Chemistry and Applications 2022, pages 1-11.
Crossref
Crossref
Maria E. Nolasco, Viviane A. S. Lemos, Gina López, Sandra A. Soares, Johnny P. M. Feitosa, Bruno S. Araújo, Alejandro P. Ayala, Marleane M. F. de Azevedo, Francisco E. P. Santos & Rivelino M. Cavalcante. (2022) Morphology, Chemical Characterization and Sources of Microplastics in a Coastal City in the Equatorial Zone with Diverse Anthropogenic Activities (Fortaleza city, Brazil). Journal of Polymers and the Environment 30:7, pages 2862-2874.
Crossref
Crossref
Noor S. Sadeq, Zaid G. Mohammadsalih & Duaa Ali. (2022) Natural fibers and their applications: A review. Jornual of AL-Farabi for Engineering Sciences 1:1, pages 13.
Crossref
Crossref
Sampath Boopathi, Alagu Thillaivanan, Mohammed Abdul Azeem, P Shanmugam & V R Pramod. (2022) Experimental investigation on abrasive water jet machining of neem wood plastic composite. Functional Composites and Structures 4:2, pages 025001.
Crossref
Crossref
Muhammad Rizal Muhammad Asyraf, Agusril Syamsir, Abu Bakar Mohd Supian, Fathoni Usman, Rushdan Ahmad Ilyas, Norizan Mohd Nurazzi, Mohd Nor Faiz Norrrahim, Muhammad Rizal Razman, Sharifah Zarina Syed Zakaria, Shubham Sharma, Zarina Itam & Mohamad Zakir Abd Rashid. (2022) Sugar Palm Fibre-Reinforced Polymer Composites: Influence of Chemical Treatments on Its Mechanical Properties. Materials 15:11, pages 3852.
Crossref
Crossref
Osbert Akatwijuka, Mohamed A.-H. Gepreel, Ahmed Abdel-Mawgood, Mitsuo Yamamoto, Yukie Saito & Ahmed H. Hassanin. (2022) Overview of banana cellulosic fibers: agro-biomass potential, fiber extraction, properties, and sustainable applications. Biomass Conversion and Biorefinery.
Crossref
Crossref
R Várdai, M Ferdinánd, T Lummerstorfer, C Pretschuh, M Jerabek, M Gahleitner, G Faludi, J Móczó & B Pukánszky. (2021) Impact modification of hybrid polypropylene composites with poly(vinyl alcohol) fibers. Journal of Reinforced Plastics and Composites 41:9-10, pages 399-410.
Crossref
Crossref
Naresh Kumar, Vikas Mehta, Sushil Kumar, J. S. Grewal & Sarafat Ali. (2022)
Bamboo natural fiber and
PAN
fiber used as a reinforced brake friction material: Developed asbestos‐free brake pads
. Polymer Composites 43:5, pages 2888-2895.
Crossref
Crossref
Enrique Terroba-Delicado, Stefano Fiori, Jaume Gomez-Caturla, Nestor Montanes, Lourdes Sanchez-Nacher & Sergio Torres-Giner. (2022) Valorization of Liquor Waste Derived Spent Coffee Grains for the Development of Injection-Molded Polylactide Pieces of Interest as Disposable Food Packaging and Serving Materials. Foods 11:8, pages 1162.
Crossref
Crossref
Jisoo Kim, Azat Slyamov, Erik Lauridsen, Mie Birkbak, Tiago Ramos, Federica Marone, Jens W. Andreasen, Marco Stampanoni & Matias Kagias. (2022) Macroscopic mapping of microscale fibers in freeform injection molded fiber-reinforced composites using X-ray scattering tensor tomography. Composites Part B: Engineering 233, pages 109634.
Crossref
Crossref
Sarafat Ali, Naresh Kumar, Jasmaninder Singh Grewal Grewal, Vikas Thakur, Kwok Wing Chau & Mukesh Kumar. (2022) Coconut waste fiber used as brake pad reinforcement polymer composite and compared to standard Kevlar‐based brake pads to produce an asbestos free brake friction material. Polymer Composites 43:3, pages 1518-1525.
Crossref
Crossref
Sanjay Mavinkere Rangappa, Suchart Siengchin, Jyotishkumar Parameswaranpillai, Mohammad Jawaid & Togay Ozbakkaloglu. (2021) Lignocellulosic fiber reinforced composites: Progress, performance, properties, applications, and future perspectives. Polymer Composites 43:2, pages 645-691.
Crossref
Crossref
Naresh Kumar, Sushil Kumar, Jasmaninder Singh Grewal, Vikas Mehta & Sarafat Ali. (2021) Comparative study of Abaca fiber and Kevlar fibers based brake friction composites. Polymer Composites 43:2, pages 730-740.
Crossref
Crossref
Louise Lods, Tutea Richmond, Jany Dandurand, Eric Dantras, Colette Lacabanne, Jean-Michel Durand, Edouard Sherwood, Gilles Hochstetter & Philippe Ponteins. (2022) Continuous Bamboo Fibers/Fire-Retardant Polyamide 11: Dynamic Mechanical Behavior of the Biobased Composite. Polymers 14:2, pages 299.
Crossref
Crossref
Rajib Bhowmik, Sibaji Das, Debarshi Mallick & S.S. Gautam. (2022) Predicting the elastic properties of hemp fiber – A comparative study on different polymer composite. Materials Today: Proceedings 50, pages 2510-2514.
Crossref
Crossref
Sandeep Kumar, Alakesh Manna & Rakesh Dang. (2022) A review on applications of natural Fiber-Reinforced composites (NFRCs). Materials Today: Proceedings 50, pages 1632-1636.
Crossref
Crossref
Naresh Kumar, Avtar Singh, Sanpreet Singh, Jai Inder Preet Singh & Sushil Kumar. (2022) Napier natural fibre used as reinforcement polymer composite: As asbestos free brake friction material. Materials Today: Proceedings 56, pages 2532-2536.
Crossref
Crossref
K.S. Anjumol, S.N. Sreenivasan, Thara Tom, Sneha Sabu Mathew, Hanna J. Maria, Petr Spatenka & Sabu Thomas. 2022. Bio-Based Flame-retardant Technology for Polymeric Materials. Bio-Based Flame-retardant Technology for Polymeric Materials
369
389
.
V. Kavimani, P.M. Gopal & Titus Thankachan. 2022. Advances in Bio-Based Fiber. Advances in Bio-Based Fiber
603
618
.
Nur-Us-Shafa Mazumder, Rashed Al Mizan & Mohammad Irfan Iqbal. 2022. Advances in Bio-Based Fiber. Advances in Bio-Based Fiber
213
235
.
Asim Shahzad, Carmen-Alice Teacă & Fulga Tanasă. 2022. Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites. Surface Treatment Methods of Natural Fibres and their Effects on Biocomposites
1
18
.
Louise Lods, Tutea Richmond, Jany Dandurand, Eric Dantras, Colette Lacabanne, Jean-Michel Durand, Edouard Sherwood, Gilles Hochstetter & Philippe Ponteins. (2021) Thermal stability and mechanical behavior of technical bamboo fibers/bio-based polyamide composites. Journal of Thermal Analysis and Calorimetry 147:2, pages 1097-1106.
Crossref
Crossref
Yan Li & Qian LiYan Li & Qian Li. 2022. Plant Fiber Reinforced Composites. Plant Fiber Reinforced Composites
217
222
.
B. D. S. Deeraj, Jitha S. Jayan, Appukuttan Saritha & Kuruvilla Joseph. 2022. Handbook of Epoxy/Fiber Composites. Handbook of Epoxy/Fiber Composites
393
424
.
B. D. S. Deeraj, Jitha S. Jayan, Appukuttan Saritha & Kuruvilla Joseph. 2020. Handbook of Epoxy/Fiber Composites. Handbook of Epoxy/Fiber Composites
1
32
.
Naresh Kumar, Jasmaninder Singh Grewal, Nitin Kumar, Sushil Kumar & Sarafat Ali. (2021) A novel Pinus roxburghii natural leaves fiber used as reinforcement polymer composite: As asbestos‐free brake friction material. Polymer Composites 43:1, pages 566-573.
Crossref
Crossref
Azizatul Karimah, Muhammad Rasyidur Ridho, Sasa Sofyan Munawar, Ismadi, Yusup Amin, Ratih Damayanti, Muhammad Adly Rahandi Lubis, Asri Peni Wulandari, Nurindah, Apri Heri Iswanto, Ahmad Fudholi, Mochamad Asrofi, Euis Saedah, Nasmi Herlina Sari, Bayu Rizky Pratama, Widya Fatriasari, Deded Sarip Nawawi, Sanjay Mavinkere Rangappa & Suchart Siengchin. (2021) A Comprehensive Review on Natural Fibers: Technological and Socio-Economical Aspects. Polymers 13:24, pages 4280.
Crossref
Crossref
M. S. Rabbi, Tansirul Islam & G. M. Sadiqul Islam. (2021) Injection-molded natural fiber-reinforced polymer composites–a review. International Journal of Mechanical and Materials Engineering 16:1.
Crossref
Crossref
K. B. Prakash, Yahya Ali Fageehi, Rajasekaran Saminathan, P. Manoj Kumar, S. Saravanakumar, Ram Subbiah, B. Arulmurugan & S Rajkumar. (2021) Influence of Fiber Volume and Fiber Length on Thermal and Flexural Properties of a Hybrid Natural Polymer Composite Prepared with Banana Stem, Pineapple Leaf, and S-Glass. Advances in Materials Science and Engineering 2021, pages 1-11.
Crossref
Crossref
Venkatesh Ananchaperumal & Srikanth Vedantam. (2021) Formation and Evolution of Microstructure in Shape Memory Alloy Wire Reinforced Composites. Transactions of the Indian Institute of Metals 74:10, pages 2499-2510.
Crossref
Crossref
Neelima Anup, Tejas Chavan, Shruti Chavan, Suryanarayana Polaka, Dnyaneshwar Kalyane, Sara Nidal Abed, Katharigatta N. Venugopala, Kiran Kalia & Rakesh K. Tekade. (2021) Reinforced electrospun nanofiber composites for drug delivery applications. Journal of Biomedical Materials Research Part A 109:10, pages 2036-2064.
Crossref
Crossref
Albert Serra, Ferran Serra-Parareda, Fabiola Vilaseca, Marc Delgado-Aguilar, Francesc X. Espinach & Quim Tarrés. (2021) Exploring the Potential of Cotton Industry Byproducts in the Plastic Composite Sector: Macro and Micromechanics Study of the Flexural Modulus. Materials 14:17, pages 4787.
Crossref
Crossref
Reeghan Osmond, Zahra Mollahoseini, Jeevanjot Singh, Abhisar Gautam, Rudolf Seethaler, Kevin Golovin & Abbas S. Milani. (2021) A group multicriteria decision making with ANOVA to select optimum parameters of drilling flax fibre composites: A case study. Composites Part C: Open Access 5, pages 100156.
Crossref
Crossref
Swapnil Chandgude & Sachin Salunkhe. (2021) In state of art: Mechanical behavior of natural fiber‐based hybrid polymeric composites for application of automobile components. Polymer Composites 42:6, pages 2678-2703.
Crossref
Crossref
Róbert Várdai, Thomas Lummerstorfer, Claudia Pretschuh, Michael Jerabek, Markus Gahleitner, András Bartos, János Móczó, Juliana Anggono & Béla Pukánszky. (2021) Improvement of the impact resistance of natural fiber–reinforced polypropylene composites through hybridization. Polymers for Advanced Technologies 32:6, pages 2499-2507.
Crossref
Crossref
Justyna Miedzianowska, Marcin Masłowski, Przemysław Rybiński & Krzysztof Strzelec. (2021) Straw/Nano-Additive Hybrids as Functional Fillers for Natural Rubber Biocomposites. Materials 14:2, pages 321.
Crossref
Crossref
Rittin Abraham Kurien, D. Philip Selvaraj, M. Sekar, Chacko Preno Koshy & D. Tijo. (2021) Mechanical Characterization and Evaluation of NaOH Treated Chopped Abaca Fiber Reinforced Epoxy Composites. Materials Science Forum 1019, pages 12-18.
Crossref
Crossref
Oluranti Agboola, Patricia A. P. Popoola, Rotimi Sadiku, Samuel Eshorame Sanni, Damilola E. Babatunde, Olubunmi G. Abatan, Sunday Ojo Fayomi & Oluwaseun V. Fasiku. 2021. Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials. Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials
1353
1387
.
Haydar U Zaman & Ruhul A Khan. (2019) Acetylation used for natural fiber/polymer composites. Journal of Thermoplastic Composite Materials 34:1, pages 3-23.
Crossref
Crossref
S. Venkatarajan, C. Subbu, A. Athijayamani & R. Muthuraja. (2021) Mechanical properties of natural cellulose fibers reinforced polymer composites – 2015–2020: A review. Materials Today: Proceedings 47, pages 1017-1024.
Crossref
Crossref
Tanvi Saxena & V.K. Chawla. (2021) Banana leaf fiber-based green composite: An explicit review report. Materials Today: Proceedings 46, pages 6618-6624.
Crossref
Crossref
Himanshu V. Patel & Harshit K. Dave. (2021) Effect of fiber orientation on tensile strength of thin composites. Materials Today: Proceedings 46, pages 8634-8638.
Crossref
Crossref
A. Suresh, A. Devaraju & L. Jayakumar. (2021) Analysis of the mechanical and wear properties of Calotropis Gigantea Stem Fiber/Flax Fiber as reinforcement epoxy hybrid composites. Materials Today: Proceedings 39, pages 827-833.
Crossref
Crossref
Jagannathan Sundarababu, Shanmuga Sundaram Anandan & Paulius Griskevicius. (2021) Evaluation of mechanical properties of biodegradable coconut shell/rice husk Powder polymer composites for light weight applications. Materials Today: Proceedings 39, pages 1241-1247.
Crossref
Crossref
Ana Balea, Elena Fuente, Mª Concepción Monte, Ángeles Blanco & Carlos Negro. 2021. Fiber Reinforced Composites. Fiber Reinforced Composites
597
648
.
Umar Nirmal, C.W. Chin, M.Y. Yuhazri, M.H. Amirhafizan & M.M.H. Megat Ahmad. 2021. Biocomposite and Synthetic Composites for Automotive Applications. Biocomposite and Synthetic Composites for Automotive Applications
107
146
.
Pedro J. Herrera-Franco & Alex Valadez-González. 2021. Encyclopedia of Materials: Composites. Encyclopedia of Materials: Composites
94
116
.
Navin Chand & Mohammed Fahim. 2021. Tribology of Natural Fiber Polymer Composites. Tribology of Natural Fiber Polymer Composites
1
59
.
Prasanth Kottapalli, Rahul Narkhede, Harshit K. Dave, Himanshu V. Patel & Rajesh kumar Verma. 2021. Advances in Manufacturing Processes. Advances in Manufacturing Processes
397
409
.
N. Babu, C. S. Rathnasabapathy & N. Karunakaran. 2021. Advances in Industrial Automation and Smart Manufacturing. Advances in Industrial Automation and Smart Manufacturing
771
783
.
Mohamad Midani & Ahmed H. Hassanin. 2021. Advances in Machining of Composite Materials. Advances in Machining of Composite Materials
395
420
.
Wanja Wellbrock, Daniela Ludin, Linda Röhrle & Wolfgang Gerstlberger. (2020) Sustainability in the automotive industry, importance of and impact on automobile interior – insights from an empirical survey. International Journal of Corporate Social Responsibility 5:1.
Crossref
Crossref
M Arulmurugan, A S Selvakumar, Krishnasamy Prabu & G Rajamurugan. (2020) Effect of barium sulphate on mechanical, DMA and thermal behaviour of woven aloevera/flax hybrid composites. Bulletin of Materials Science 43:1.
Crossref
Crossref
Mohamad Alhijazi, Qasim Zeeshan, Babak Safaei, Mohammed Asmael & Zhaoye Qin. (2020) Recent Developments in Palm Fibers Composites: A Review. Journal of Polymers and the Environment 28:12, pages 3029-3054.
Crossref
Crossref
Mauricio Torres-Arellano, Victoria Renteria-Rodríguez & Edgar Franco-Urquiza. (2020) Mechanical Properties of Natural-Fiber-Reinforced Biobased Epoxy Resins Manufactured by Resin Infusion Process. Polymers 12:12, pages 2841.
Crossref
Crossref
Bhuvaneshwaran Mylsamy, Vivekanandhan Chinnasamy, Sathish Kumar Palaniappan, Sampath Pavayee Subramani & Chandrasekar Gopalsamy. (2020) Effect of surface treatment on the tribological properties of Coccinia Indica cellulosic fiber reinforced polymer composites. Journal of Materials Research and Technology 9:6, pages 16423-16434.
Crossref
Crossref
Quoc‐Bao Nguyen, Nhu‐Hai Nguyen, Agustín Rios de Anda, Vu‐Hieu Nguyen, Davy‐Louis Versace, Valérie Langlois, Salah Naili & Estelle Renard. (2020) Photocurable bulk epoxy resins based on resorcinol derivative through cationic polymerization. Journal of Applied Polymer Science 137:36.
Crossref
Crossref
Yong Guo, Li Wang, Hao Wang, Yuxia Chen, Shiliu Zhu, Tong Chen & Panpan Luo. (2020) Properties of bamboo flour/high‐density polyethylene composites reinforced with ultrahigh molecular weight polyethylene. Journal of Applied Polymer Science 137:33.
Crossref
Crossref
Nesrine Bouhamed, Slim Souissi, Pierre Marechal, Mohamed Ben Amar, Olivier Lenoir, Romain Leger & Anne Bergeret. (2020) Ultrasound evaluation of the mechanical properties as an investigation tool for the wood-polymer composites including olive wood flour. Mechanics of Materials 148, pages 103445.
Crossref
Crossref
Raymond Hajj, Roland El Hage, Rodolphe Sonnier, Belkacem Otazaghine, Sophie Rouif, Michel Nakhl & José-Marie Lopez-Cuesta. (2020) Influence of lignocellulosic substrate and phosphorus flame retardant type on grafting yield and flame retardancy. Reactive and Functional Polymers 153, pages 104612.
Crossref
Crossref
Ferran Serra-Parareda, Francesc Xavier Espinach, Maria Àngels Pelach, José Alberto Méndez, Fabiola Vilaseca & Quim Tarrés. (2020) Effect of NaOH Treatment on the Flexural Modulus of Hemp Core Reinforced Composites and on the Intrinsic Flexural Moduli of the Fibers. Polymers 12:6, pages 1428.
Crossref
Crossref
Mariana D. Stanciu, Horatiu Teodorescu Draghicescu, Florin Tamas & Ovidiu Mihai Terciu. (2020) Mechanical and Rheological Behaviour of Composites Reinforced with Natural Fibres. Polymers 12:6, pages 1402.
Crossref
Crossref
Masrat Rasheed, Mohammad Jawaid, Zoheb Karim & Luqman Chuah Abdullah. (2020) Morphological, Physiochemical and Thermal Properties of Microcrystalline Cellulose (MCC) Extracted from Bamboo Fiber. Molecules 25:12, pages 2824.
Crossref
Crossref
Rittin Abraham Kurien, D Philip Selvaraj, M Sekar & Chacko Preno Koshy. (2020) Green composite materials for green technology in the automotive industry. IOP Conference Series: Materials Science and Engineering 872:1, pages 012064.
Crossref
Crossref
Emmanuel Ajenifuja, Peter Odetola, Abimbola P. I. Popoola & Olawale Popoola. (2020) Spark plasma sintering and structural analysis of nickel-titanium/coconut shell powder metal matrix composites. The International Journal of Advanced Manufacturing Technology 108:11-12, pages 3465-3473.
Crossref
Crossref
Abdulmounem Alchekh Wis, Mehmet Kodal, Sinan Ozturk & Guralp Ozkoc. (2019) Overmolded polylactide/jute‐mat eco‐composites: A new method to enhance the properties of natural fiber biodegradable composites. Journal of Applied Polymer Science 137:20, pages 48692.
Crossref
Crossref
Mouna Werchefani, Catherine Lacoste, Ahmed Elloumi, Hafedh Belghith, Ali Gargouri & Chedly Bradai. (2020) Enzyme‐treated Tunisian Alfa fibers reinforced polylactic acid composites: An investigation in morphological, thermal, mechanical, and water resistance properties. Polymer Composites 41:5, pages 1721-1735.
Crossref
Crossref
Mohamed Habibi & Luc Laperrière. (2020) Digital image correlation and acoustic emission for damage analysis during tensile loading of open-hole flax laminates. Engineering Fracture Mechanics 228, pages 106921.
Crossref
Crossref
Nitin Girdhar Shinde & Dilip Mangesh Patel. (2020) A Short Review on Automobile Dashboard Materials. IOP Conference Series: Materials Science and Engineering 810:1, pages 012033.
Crossref
Crossref
P. Albert Seldon & N. Abilash. (2020) Appraisal on Varied Natural and Artificial Fiber Reinforced Polymeric Composites. Materials Today: Proceedings 22, pages 3213-3219.
Crossref
Crossref
R.S. Rana, Saraswati Rana, Archana Nigrawal, Bipin kumar & Ashish kumar. (2020) Preparation and mechanical properties evaluation of polyvinyl alcohol and banana fibres composite. Materials Today: Proceedings 26, pages 3145-3147.
Crossref
Crossref
Udaykumar V. Saindane, Sandeep Soni & Jyoti V. Menghani. (2020) Recent research status on synthesis and characterization of natural fibers reinforced polymer composites and modern friction materials – An overview. Materials Today: Proceedings 26, pages 1616-1620.
Crossref
Crossref
Yong K. Kim & Vijaya Chalivendra. 2020. Handbook of Natural Fibres. Handbook of Natural Fibres
469
498
.
Pierre Ouagne, Damien Soulat, Philippe Evon, Sullivan Renouard, Manuela Ferreira, Laurent Labonne, Ahmad Rashed Labanieh, Eric Laine & Emmanuel De Luycker. 2020. Handbook of Natural Fibres. Handbook of Natural Fibres
169
204
.
Mohd F. Omar, Haliza Jaya & Nik N. Zulkepli. 2020. Encyclopedia of Renewable and Sustainable Materials. Encyclopedia of Renewable and Sustainable Materials
95
101
.
A. Rafiqah, K. Abdan, M. Nasir & M. Asim. 2020. Pineapple Leaf Fibers. Pineapple Leaf Fibers
41
54
.
Beyanagari Sudheer Reddy, M. Rajesh, Edwin Sudhakar, Ariful Rahaman, Jayakrishna Kandasamy & M. T. H. Sultan. 2020. Pineapple Leaf Fibers. Pineapple Leaf Fibers
279
296
.
Fulga Tanasă, Mădălina Zănoagă, Carmen‐Alice Teacă, Mărioara Nechifor & Asim Shahzad. (2019) Modified hemp fibers intended for fiber‐reinforced polymer composites used in structural applications—A review. I. Methods of modification. Polymer Composites 41:1, pages 5-31.
Crossref
Crossref
S.S. Lawal, N.A. Ademoh, K.C. Bala & A.S. Abdulrahman. (2019) A Review of the Compositions, Processing, Materials and Properties of Brake Pad Production. Journal of Physics: Conference Series 1378:3, pages 032103.
Crossref
Crossref
Matias Kagias, Zhentian Wang, Mie Elholm Birkbak, Erik Lauridsen, Matteo Abis, Goran Lovric, Konstantins Jefimovs & Marco Stampanoni. (2019) Diffractive small angle X-ray scattering imaging for anisotropic structures. Nature Communications 10:1.
Crossref
Crossref
K H Khor, M S Abdul Majid, M J M Ridzuan & E M Cheng. (2019) Impact response performance of pineapple leaf fibre (PALF)/carbon reinforced hybrid composite. IOP Conference Series: Materials Science and Engineering 670:1, pages 012029.
Crossref
Crossref
Kapil Gulati, Sohan Lal & Sanjiv Arora. (2019) Synthesis and characterization of PVA/Starch/CMC composite films reinforced with walnut (Juglans regia L.) shell flour. SN Applied Sciences 1:11.
Crossref
Crossref
Mohammad Hazim Mohamad Hamdan, Januar Parlaungan Siregar, Tezara Cionita, Jamiluddin Jaafar, Agung Efriyohadi, Ramli Junid & Ahmad Kholil. (2019) Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites. The International Journal of Advanced Manufacturing Technology 104:1-4, pages 1075-1086.
Crossref
Crossref
Tang, Wang, Wang, Cheng & Guo. (2019) An Investigation on the Comprehensive Property Assessment and Future Directions of Single Bamboo Fiber Reinforced Polypropylene Composites Fabricated by a Non-Woven Paving and Advanced Molding Process. Materials 12:16, pages 2641.
Crossref
Crossref
Raymond Hajj, Belkacem Otazaghine, Rodolphe Sonnier, Roland El Hage, Sophie Rouif, Michel Nakhl & José-Marie Lopez-Cuesta. (2019) Influence of monomer reactivity on radiation grafting of phosphorus flame retardants on flax fabrics. Polymer Degradation and Stability 166, pages 86-98.
Crossref
Crossref
Nor Azlina Ramlee, Mohammad Jawaid, Edi Syams Zainudin & Shaikh Abdul Karim Yamani. (2019) Tensile, physical and morphological properties of oil palm empty fruit bunch/sugarcane bagasse fibre reinforced phenolic hybrid composites. Journal of Materials Research and Technology 8:4, pages 3466-3474.
Crossref
Crossref
Sana Ben Abdallah, Marie Teixeira, Ichem Chala, Belkacem Otazaghine, Rodolphe Sonnier, Claire Longuet, Jean-Claude Roux & Sophie Rouif. (2019) Chemical treatments of flax fibers – Control of the diffusion of molecules into the fiber structure. Industrial Crops and Products 132, pages 430-439.
Crossref
Crossref
Sutanu Samanta & Thingujam Jackson Singh. (2019) Effect of Kevlar Hybridization on Dry Sliding Friction and Wear Behaviour of Bamboo/Epoxy Composites. Key Engineering Materials 801, pages 89-94.
Crossref
Crossref
M. Ramesh. (2019) Flax (Linum usitatissimum L.) fibre reinforced polymer composite materials: A review on preparation, properties and prospects. Progress in Materials Science 102, pages 109-166.
Crossref
Crossref
Sevda BORAN TORUN, Emrah PEŞMAN & Ayfer DÖNMEZ ÇAVDAR. (2019) Alkali muameleli kupula lifi katkılı yüksek yoğunluklu polietilen kompozitlerin teknolojik özellikleriThe technological properties of the high density polyethylene composites filled with alkali treated cupula fiber. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 20:1, pages 73-81.
Crossref
Crossref
Ahmad Al-Maharma & Naser Al-Huniti. (2019) Critical Review of the Parameters Affecting the Effectiveness of Moisture Absorption Treatments Used for Natural Composites. Journal of Composites Science 3:1, pages 27.
Crossref
Crossref
Sanjay M.R., Suchart Siengchin, Jyotishkumar Parameswaranpillai, Mohammad Jawaid, Catalin Iulian Pruncu & Anish Khan. (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization. Carbohydrate Polymers 207, pages 108-121.
Crossref
Crossref
Oluranti Agboola, Patricia A. P. Popoola, Rotimi Sadiku, Samuel Eshorame Sanni, Damilola E. Babatunde, Olubunmi G. Abatan, Sunday Ojo Fayomi & Oluwaseun V. Fasiku. 2019. Polymer Nanocomposites for Advanced Engineering and Military Applications. Polymer Nanocomposites for Advanced Engineering and Military Applications
96
130
.
L.M. Chiacchiarelli. 2019. Biomass, Biopolymer-Based Materials, and Bioenergy. Biomass, Biopolymer-Based Materials, and Bioenergy
135
160
.
Samson Rwahwire, Blanka Tomkova, Aravin Prince Periyasamy & Bandu Madhukar Kale. 2019. Green Composites for Automotive Applications. Green Composites for Automotive Applications
61
80
.
Shashi Kant Verma, Ashutosh Gupta, Vinay Kumar Patel, Brijesh Gangil & Lalit Ranikoti. 2019. Automotive Tribology. Automotive Tribology
31
49
.
Majda Sfiligoj Smole, Silvo Hribernik, Manja Kurečič, Andreja Urbanek Krajnc, Tatjana Kreže & Karin Stana KleinschekMajda Sfiligoj Smole, Silvo Hribernik, Manja Kurečič, Andreja Urbanek Krajnc, Tatjana Kreže & Karin Stana Kleinschek. 2019. Surface Properties of Non-conventional Cellulose Fibres. Surface Properties of Non-conventional Cellulose Fibres
1
5
.
Mohamed A. Attia, Marwa A. Abd El-Baky, Mohamad A. Hassan, Tamer A. Sebaey & Elsadig Mahdi. (2018) Crashworthiness characteristics of carbon-jute-glass reinforced epoxy composite circular tubes. Polymer Composites 39:S4, pages E2245-E2261.
Crossref
Crossref
Paulo Peças, Hugo Carvalho, Hafiz Salman & Marco Leite. (2018) Natural Fibre Composites and Their Applications: A Review. Journal of Composites Science 2:4, pages 66.
Crossref
Crossref
Mohammed Khalifa, B. Deeksha, Arunjunairaj Mahendran & S. Anandhan. (2018) Synergism of Electrospinning and Nano-alumina Trihydrate on the Polymorphism, Crystallinity and Piezoelectric Performance of PVDF Nanofibers. JOM 70:7, pages 1313-1318.
Crossref
Crossref
N Ramli, N Mazlan, Y Ando, Z Leman, K Abdan, A A Aziz & N A Sairy. (2018) Natural fiber for green technology in automotive industry: A brief review. IOP Conference Series: Materials Science and Engineering 368, pages 012012.
Crossref
Crossref
Yingying Li & Jian Li. (2018) Fabrication of reversible thermoresponsive thin films on wood surfaces with hydrophobic performance. Progress in Organic Coatings 119, pages 15-22.
Crossref
Crossref
Chensong Dong. (2017) Review of natural fibre-reinforced hybrid composites. Journal of Reinforced Plastics and Composites 37:5, pages 331-348.
Crossref
Crossref
Jian Wang, Jie Dong, Jianwei Zhang, Baodong Zhu & Dongling Cui. (2018) Effects of fiber-surface modification on the properties of bamboo flour/polypropylene composites and their interfacial compatibility. Journal of Polymer Engineering 38:2, pages 157-166.
Crossref
Crossref
Bouguessir Hamza, Harkati ElHadi, Rokbi Mansour, Georgios Priniotakis, Savvas Vassilliadis, Sozon Vasilakos, Hadjer Boughanem & Lahcene Fellah. (2018) Physico-chemical and mechanical characterization of Jute fabrics for civil engineering applications. Journal of Computational Methods in Sciences and Engineering 18:1, pages 129-147.
Crossref
Crossref
Sudeepan Jayapalan. 2018. Composites and Advanced Materials for Industrial Applications. Composites and Advanced Materials for Industrial Applications
16
37
.
Sarah S. Gebai, Ali M. Hallal & Mohammad S. Hammoud. 2018. Mechanical Properties of Natural Fiber Reinforced Polymers. Mechanical Properties of Natural Fiber Reinforced Polymers
1
29
.
Aurelio Bifulco, Agostino Capasso, Massimo Durante, Alessandro Piccolo, Pierluigi Mazzei, Aniello Costantini, Brigida Silvestri, Miriam Pennetta, Giulio Malucelli & Francesco Branda. Flame retardancy and mechanical properties of ecofriendly coated hemp fabrics/epoxy composites. Flame retardancy and mechanical properties of ecofriendly coated hemp fabrics/epoxy composites.
Pierre Ouagne, Philippe Evon, Vincent Placet & Damien Soulat. From fibre extraction to the composite manufacturing processes: Which path to adopt to maximise the mechanical properties of natural fibre based composites?. From fibre extraction to the composite manufacturing processes: Which path to adopt to maximise the mechanical properties of natural fibre based composites?.
Shaohua Jiang, Yiming Chen, Gaigai Duan, Changtong Mei, Andreas Greiner & Seema Agarwal. (2018) Electrospun nanofiber reinforced composites: a review. Polymer Chemistry 9:20, pages 2685-2720.
Crossref
Crossref
Moon Mandal, Punampriya Borgohain, Pakiza Begum, Ramesh C. Deka & Tarun K. Maji. (2018) Property enhancement and DFT study of wood polymer composites using rosin derivatives as co-monomers. New Journal of Chemistry 42:3, pages 2260-2269.
Crossref
Crossref
Raymond Hajj, Roland El Hage, Rodolphe Sonnier, Belkacem Otazaghine, Benjamin Gallard, Sophie Rouif, Michel Nakhl & José-Marie Lopez-Cuesta. (2018) Grafting of phosphorus flame retardants on flax fabrics: Comparison between two routes. Polymer Degradation and Stability 147, pages 25-34.
Crossref
Crossref
Anil Dhanola, Anand Singh Bisht, Anil Kumar & Aman Kumar. (2018) Influence of natural fillers on physico-mechanical properties of luffa cylindrica/ polyester composites. Materials Today: Proceedings 5:9, pages 17021-17029.
Crossref
Crossref
S.A.N. Mohamed, E.S. Zainudin, S.M. Sapuan, M.D. Azaman & A.M.T. Arifin. 2018. Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites. Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites
1
25
.
Sikiru Oluwarotimi Ismail & Hom Nath Dhakal. 2018. Functional Biopolymers. Functional Biopolymers
239
280
.
Pietro Russo, Giorgio Simeoli, Valentina Lopresto, Antonio Langella & Ilaria Papa. 2018. Advances in Natural Fibre Composites. Advances in Natural Fibre Composites
119
126
.
M. Tazi, F. Erchiqui & H. Kaddami. (2018) Influence of SOFTWOOD-fillers content on the biodegradability and morphological properties of WOOD-polyethylene composites. Polymer Composites 39:1, pages 29-37.
Crossref
Crossref
R Vinayagamoorthy. (2017) A review on the polymeric laminates reinforced with natural fibers. Journal of Reinforced Plastics and Composites 36:21, pages 1577-1589.
Crossref
Crossref
M. Ramesh, K. Palanikumar & K. Hemachandra Reddy. (2017) Plant fibre based bio-composites: Sustainable and renewable green materials. Renewable and Sustainable Energy Reviews 79, pages 558-584.
Crossref
Crossref
Obed Akampumuza, Paul. M. Wambua, Azzam Ahmed, Wei Li & Xiao-Hong Qin. (2017) Review of the applications of biocomposites in the automotive industry. Polymer Composites 38:11, pages 2553-2569.
Crossref
Crossref
R. Panneer. (2017) Effect of Composition of Fibers on Properties of Hybrid Composites. International Journal of Manufacturing, Materials, and Mechanical Engineering 7:4, pages 28-43.
Crossref
Crossref
Vincenzo Guarino, Gennaro Gentile, Luigi Sorrentino & Luigi Ambrosio. 2002. Encyclopedia of Polymer Science and Technology. Encyclopedia of Polymer Science and Technology
1
36
.
Jiale Huang, Wangyu Liu, Feng Zhou & Yujian Peng. (2017) Stiffness variability analysis of maize fiber bundles via multiscale simulation. Journal of Materials Science 52:13, pages 7917-7928.
Crossref
Crossref
R.R.C. da Costa, A.C. Vieira, R.M. Guedes & V. Tita. 2017. Handbook of Composites from Renewable Materials. Handbook of Composites from Renewable Materials
581
606
.
Katharina Resch-Fauster, Andrea Klein, Silvia Lloret Pertegás & Ralf Schledjewski. 2017. Handbook of Composites from Renewable Materials. Handbook of Composites from Renewable Materials
1
24
.
Basavaraju Bennehalli, Srinivasa Chikkol Venkateshappa, Rama Devi Punyamurthy, Rama Devi Punyamurthy, Dhanalakshmi Sampathkumar, Dhanalakshmi Sampathkumar & Raghu Patel Gowdru Rangana Gowda. 2017. Handbook of Composites from Renewable Materials. Handbook of Composites from Renewable Materials
353
375
.
C I P K Kencanawati, N P G Suardana, I K G Sugita & I W B Suyasa. (2017) A study on biocomposite from local balinese areca catechu l. husk fibers as reinforced material. IOP Conference Series: Materials Science and Engineering 201, pages 012002.
Crossref
Crossref
Taneli Väisänen, Oisik Das & Laura Tomppo. (2017) A review on new bio-based constituents for natural fiber-polymer composites. Journal of Cleaner Production 149, pages 582-596.
Crossref
Crossref
Displaying 200 of 271 citing articles. Use the download link below to view the full list of citing articles.
Download full citations list