Advanced search
Publication Cover
Journal of Microencapsulation
Micro and Nano Carriers
Volume 27, 2010 - Issue 6
Submit an article Journal homepage
619
Views
40
CrossRef citations to date
0
Altmetric
Research Article

Influence of plasticizer type and level on the properties of Eudragit® S100 matrix pellets prepared by hot-melt extrusion

Sandra U. Schilling Drug Dynamics Institute, College of Pharmacy, University of Texas at Austin, Austin, TX, USA; Merck KGaA, Darmstadt, Germany
,
Hélène L. Lirola Drug Dynamics Institute, College of Pharmacy, University of Texas at Austin, Austin, TX, USA
,
Navnit H. Shah Hoffmann-LaRoche, Inc., Nutley, NJ, USA
,
A. Waseem Malick Hoffmann-LaRoche, Inc., Nutley, NJ, USA
&
James W. McGinity Drug Dynamics Institute, College of Pharmacy, University of Texas at Austin, Austin, TX, USACorrespondence[email protected]
Pages 521-532 | Received 29 Jul 2009, Accepted 09 Mar 2010, Published online: 24 Jun 2010

Citations (40)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

Theodoros Avgerinos, Nikolaos Kantiranis, Athanasia Panagopoulou, Stavros Malamataris, Kyriakos Kachrimanis & Ioannis Nikolakakis. (2018) Mechanical properties and drug release of venlafaxine HCl solid mini matrices prepared by hot-melt extrusion and hot or ambient compression. Drug Development and Industrial Pharmacy 44:2, pages 338-348.
Read now
Raju Onkar Sonawane & Savita Dattatraya Patil. (2016) Formulation Aspects and Effect of Critical Factors for Designing Extended Release Pellets: An Updated Review. Polymer-Plastics Technology and Engineering 55:9, pages 976-989.
Read now
Bo Lang, James W. McGinity & Robert O. Williams$suffix/text()$suffix/text(). (2014) Hot-melt extrusion – basic principles and pharmaceutical applications. Drug Development and Industrial Pharmacy 40:9, pages 1133-1155.
Read now
Michael A Repka, Sejal Shah, Jiannan Lu, Sindhuri Maddineni, Joe Morott, Ketaki Patwardhan & Noorullah Naqvi Mohammed. (2012) Melt extrusion: process to product. Expert Opinion on Drug Delivery 9:1, pages 105-125.
Read now

Articles from other publishers (36)

George Wypych. 2023. Handbook of Plasticizers. Handbook of Plasticizers 487 611 .
Jose Waimin, Sarath Gopalakrishnan, Ulisses Heredia-Rivera, Nicholas A. Kerr, Sina Nejati, Nicholas L. F. Gallina, Arun K. Bhunia & Rahim Rahimi. (2022) Low-Cost Nonreversible Electronic-Free Wireless pH Sensor for Spoilage Detection in Packaged Meat Products. ACS Applied Materials & Interfaces 14:40, pages 45752-45764.
Crossref
Ryan Varghese, Sahil Salvi, Purab Sood, Jainam Karsiya & Dileep Kumar. (2022) Recent advancements in additive manufacturing techniques employed in the pharmaceutical industry: A bird's eye view. Annals of 3D Printed Medicine 8, pages 100081.
Crossref
Prathmesh Kenjale & Varsha Pokharkar. (2022) Risk Assessment and QbD-Based Optimization of Sorafenib Tosylate Colon Targeted Bilayer Tablet: In Vitro Characterization, In Vivo Pharmacokinetic, and In Vivo Roentgenography Studies. AAPS PharmSciTech 23:6.
Crossref
Md Obyedul Kalam Azad, Md. Adnan, In Je Sung, Jung Dae Lim, Jong‐Suep Baek, Young Seok Lim & Cheol Ho Park. (2021) Development of value‐added functional food by fusion of colored potato and buckwheat flour through hot‐melt extrusion. Journal of Food Processing and Preservation 46:5.
Crossref
Harpreet Sandhu, Siva Ram Kiran Vaka, Dipen Desai, Paras Jariwala, Aruna Railkar, Wantanee Phuapradit & Navnit Shah. 2022. Oral Drug Delivery for Modified Release Formulations. Oral Drug Delivery for Modified Release Formulations 181 204 .
Sangseo Kim, Paris Fouladian, Franklin Afinjuomo, Yunmei Song, Souha H. Youssef, Sachin Vaidya & Sanjay Garg. (2022) Effect of plasticizers on drug-in-adhesive patches containing 5-fluorouracil. International Journal of Pharmaceutics 611, pages 121316.
Crossref
Ladawan Songtipya, Ponusa Songtipya, Thummanoon Prodpran, Ekwipoo Kalkornsurapranee & Jobish Johns. (2020) Fabrication of water-soluble loose-fill foam from tamarind ( Tamarindus indica L.) seed polysaccharide by mechanical frothing and freeze-drying process . Journal of Cellular Plastics 57:5, pages 643-658.
Crossref
Seth P. Forster, Erin Dippold & Tiffany Chiang. (2021) Twin-Screw Melt Granulation for Oral Solid Pharmaceutical Products. Pharmaceutics 13:5, pages 665.
Crossref
Nour Nashed, Matthew Lam & Ali Nokhodchi. (2021) A comprehensive overview of extended release oral dosage forms manufactured through hot melt extrusion and its combination with 3D printing. International Journal of Pharmaceutics 596, pages 120237.
Crossref
Anh Q. Vo, Gerd Kutz, Herman He, Sagar Narala, Suresh Bandari & Michael A. Repka. (2020) Continuous Manufacturing of Ketoprofen Delayed Release Pellets Using Melt Extrusion Technology: Application of QbD Design Space, Inline Near Infrared, and Inline Pellet Size Analysis. Journal of Pharmaceutical Sciences 109:12, pages 3598-3607.
Crossref
Marius Monschke, Kevin Kayser & Karl G. Wagner. (2020) Processing of Polyvinyl Acetate Phthalate in Hot-Melt Extrusion—Preparation of Amorphous Solid Dispersions. Pharmaceutics 12:4, pages 337.
Crossref
Md Obyedul Kalam Azad, Wie Soo Kang, Jung Dae Lim & Cheol Ho Park. (2019) Bio- Fortification of Angelica gigas Nakai Nano-Powder Using Bio-Polymer by Hot Melt Extrusion to Enhance the Bioaccessibility and Functionality of Nutraceutical Compounds. Pharmaceuticals 13:1, pages 3.
Crossref
Marius Monschke & Karl G. Wagner. (2019) Amorphous solid dispersions of weak bases with pH-dependent soluble polymers to overcome limited bioavailability due to gastric pH variability – An in-vitro approach. International Journal of Pharmaceutics 564, pages 162-170.
Crossref
Xu Xue, Guoguang Chen, Xiaoqing Xu, Jin Wang, Jingjing Wang & Lili Ren. (2019) A Combined Utilization of Plasdone-S630 and HPMCAS-HF in Ziprasidone Hydrochloride Solid Dispersion by Hot-Melt Extrusion to Enhance the Oral Bioavailability and No Food Effect. AAPS PharmSciTech 20:1.
Crossref
Ahmed Zidan, Alaadin Alayoubi, Sarah Asfari, James Coburn, Bahaa Ghammraoui, Sabir Aqueel, Celia N. Cruz & Muhammad Ashraf. (2019) Development of mechanistic models to identify critical formulation and process variables of pastes for 3D printing of modified release tablets. International Journal of Pharmaceutics 555, pages 109-123.
Crossref
J.F. Kelleher, G.C. Gilvary, A.M. Madi, D.S. Jones, S. Li, Y. Tian, A. Almajaan, Z. Senta-Loys, G.P. Andrews & A.M. Healy. (2018) A comparative study between hot-melt extrusion and spray-drying for the manufacture of anti-hypertension compatible monolithic fixed-dose combination products. International Journal of Pharmaceutics 545:1-2, pages 183-196.
Crossref
Matthias E. Lauer, Reto Maurer, Anne T. De Paepe, Cordula Stillhart, Laurence Jacob, Rajesh James, Yuki Kojima, Rene Rietmann, Tom Kissling, Joost A. van den Ende, Sabine Schwarz, Olaf Grassmann & Susanne Page. (2018) A Miniaturized Extruder to Prototype Amorphous Solid Dispersions: Selection of Plasticizers for Hot Melt Extrusion. Pharmaceutics 10:2, pages 58.
Crossref
Jiannan Lu, Sakae Obara, Fei Liu, Wanyi Fu, Wen Zhang & Shingo Kikuchi. (2017) Melt Extrusion for a High Melting Point Compound with Improved Solubility and Sustained Release. AAPS PharmSciTech 19:1, pages 358-370.
Crossref
James DiNunzioSeth ForsterChad Brown. 2017. Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials. Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials 827 844 .
Alvaro Goyanes, Fabrizio Fina, Annalisa Martorana, Daniel Sedough, Simon Gaisford & Abdul W. Basit. (2017) Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing. International Journal of Pharmaceutics 527:1-2, pages 21-30.
Crossref
Jari Pajander, Alexia Rensonnet, Sami Hietala, Jukka Rantanen & Stefania Baldursdottir. (2017) The evaluation of physical properties of injection molded systems based on poly(ethylene oxide) (PEO). International Journal of Pharmaceutics 518:1-2, pages 203-212.
Crossref
. 2017. Handbook of Plasticizers. Handbook of Plasticizers 495 605 .
David S. Jones, Yiwei Tian, Shu Li, Tao Yu, Osama A. Abu-Diak & Gavin P. Andrews. (2016) The Use of Binary Polymeric Networks in Stabilizing Polyethylene Oxide Solid Dispersions. Journal of Pharmaceutical Sciences 105:10, pages 3064-3072.
Crossref
Justin S. LaFountaine, Scott V. Jermain, Leena Kumari Prasad, Chris Brough, Dave A. Miller, Dieter Lubda, James W. McGinity & Robert O. WilliamsIIIIII. (2016) Enabling thermal processing of ritonavir–polyvinyl alcohol amorphous solid dispersions by KinetiSol® Dispersing. European Journal of Pharmaceutics and Biopharmaceutics 101, pages 72-81.
Crossref
Justin S. LaFountaine, James W. McGinity & Robert O. WilliamsIIIIII. (2015) Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review. AAPS PharmSciTech 17:1, pages 43-55.
Crossref
Feng Zhang. (2015) Melt-Extruded Eudragit® FS-Based Granules for Colonic Drug Delivery. AAPS PharmSciTech 17:1, pages 56-67.
Crossref
James DiNunzio, Seth Forster & Chad Brown. 2015. Encyclopedia of Biomedical Polymers and Polymeric Biomaterials. Encyclopedia of Biomedical Polymers and Polymeric Biomaterials 4468 4486 .
Milica Stanković, Henderik W. Frijlink & Wouter L.J. Hinrichs. (2015) Polymeric formulations for drug release prepared by hot melt extrusion: application and characterization. Drug Discovery Today 20:7, pages 812-823.
Crossref
B. Kállai-Szabó, M. Sinka, B. Stiedl, I. Sebe, I. Antal & R. Zelkó. (2014) Tracking of the solubility enhancement and drug release stability of melt extrudates containing mebendazole. Journal of Drug Delivery Science and Technology 24:5, pages 514-518.
Crossref
Sejal Shah, Sindhuri Maddineni, Jiannan Lu & Michael A. Repka. (2013) Melt extrusion with poorly soluble drugs. International Journal of Pharmaceutics 453:1, pages 233-252.
Crossref
Sejal Shah & Michael A. Repka. 2013. Melt Extrusion. Melt Extrusion 3 46 .
Kathrin Nollenberger & Jessica Albers. 2012. Hot‐Melt Extrusion: Pharmaceutical Applications. Hot‐Melt Extrusion: Pharmaceutical Applications 113 144 .
Geert Verreck. 2012. Hot‐Melt Extrusion: Pharmaceutical Applications. Hot‐Melt Extrusion: Pharmaceutical Applications 93 112 .
Ana Almeida, Bart Claeys, Jean Paul Remon & Chris Vervaet. 2012. Hot‐Melt Extrusion: Pharmaceutical Applications. Hot‐Melt Extrusion: Pharmaceutical Applications 43 69 .
. 2012. Handbook of Plasticizers. Handbook of Plasticizers 431 520 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.