Influence of plasticizer type and level on the properties of Eudragit® S100 matrix pellets prepared by hot-melt extrusion

References

• Andrews GP, Jones DS, Diak OA, McCoy CP, Watts AB, McGinity JW. The manufacture and characterisation of hot-melt extruded enteric tablets. Eur J Pharm Biopharm 2008; 69: 264–273
   PubMed Web of Science ®Google Scholar
• Avramov I. Viscosity in disordered media. J Non-Cryst Sol 2005; 351: 3163–3173
   Web of Science ®Google Scholar
• Bando H, McGinity JW. Relationship between drug dissolution and leaching of plasticizer for pellets coated with an aqueous Eudragit® S100:L100 dispersion. Int J Pharm 2006; 323: 11–17
   PubMed Web of Science ®Google Scholar
• Bodmeier R, Paeratakul O. Leaching of water-soluble plasticizers from polymeric films prepared from aqueous colloidal polymer dispersions. Drug Dev Ind Pharm 1992; 18: 1865–1882
   Web of Science ®Google Scholar
• Bruce C, Fegely KA, Rajabi-Siahboomi AR, McGinity JW. Crystal growth formation in melt extrudates. Int J Pharm 2007; 341: 162–172
   PubMed Web of Science ®Google Scholar
• Bruce LD, Shah NH, Malick WA, Infeld MH, McGinity JW. Properties of hot-melt extruded tablet formulations for the colonic delivery of 5-aminosalicylic acid. Eur J Pharm Biopharm 2005; 59: 85–97
   PubMed Web of Science ®Google Scholar
• Crowley MM, Schroeder B, Fredersdorf A, Obara S, Talarico M, Kucera SA, McGinity JW. Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion. Int J Pharm 2004; 269: 509–522
   PubMed Web of Science ®Google Scholar
• de Brabander C, Vervaet C, Remon JP. Development and evaluation of sustained release mini-matrices prepared via hot melt extrusion. J Contr Rel 2003; 89: 235–247
   PubMed Web of Science ®Google Scholar
• Fadda HM, Hernández MC, Margetson DN, McAllister SM, Basit AW, Brocchini S, Suárez N. The molecular interactions that influence the plasticizer dependent dissolution of acrylic polymer films. J Pharm Sci 2008; 97: 3957–3971
   PubMed Web of Science ®Google Scholar
• Follonier N, Doelker E, Cole ET. Evaluation of hot-melt extrusion as a new technique for the production of polymer-based pellets for sustained release capsules containing high loadings of freely soluble drugs. Drug Dev Ind Pharm 1994; 20: 1323–1339
   Web of Science ®Google Scholar
• Ghebre-Sellassie I. Multiparticulate oral drug delivery. Marcel Dekker, New York 1994
   Google Scholar
• Ghebre-Sellassie I, Martin C, Elliot B, 2007. Continuous melt spheronization apparatus and process for the production of pharmaceutical pellets. US 0264328
   Google Scholar
• Goodrich JE, Porter RS. A rheological interpretation of torque-rheometer data. Polym Eng Sci 1967; 7: 45–51
   Google Scholar
• Gryczke A, 2008. Pellets comprising an active substance matrix resistant to gastric juice. WO 2008/101743
   Google Scholar
• Lecomte F, Siepmann J, Walther M, MacRae R, Bodmeier R. Polymer blends used for the coating of multiparticulates: comparison of aqueous and organic coating techniques. Pharm Res 2004a; 21: 882–890
   PubMed Web of Science ®Google Scholar
• Lecomte F, Siepmann J, Walther M, MacRae RJ, Bodmeier R. Polymer blends used for the aqueous coating of solid dosage forms: importance of the type of plasticizer. J Contr Rel 2004b; 99: 1–13
   PubMed Web of Science ®Google Scholar
• Li Y, Wu D, Zhang J, Chang L, Wu D, Fang Z, Shi Y. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts. Powder Technol 2000; 113: 176–184
   Web of Science ®Google Scholar
• Menon ARR, Sonia TA, Sudha JD. Studies on blends of natural rubber and ethylene propylene diene rubber modified with phosphorylated cardanol prepolymer: processability, physico-mechanical properties, and morphology. J Appl Polym Sci 2006; 102: 5123–5130
   Web of Science ®Google Scholar
• Mueller W, Spengler R, Grabowski S, Sanner A, 1996. Solid depot drug form. US 5552159
   Google Scholar
• Nicklasson F, Alderborn G. Modulation of the tabletting behaviour of microcrystalline cellulose pellets by the incorporation of polyethylene glycol. Eur J Pharm Sci 1999; 9: 57–65
   PubMed Web of Science ®Google Scholar
• Okarter TU, Singla K. The effects of plasticizers on the release of metoprolol tartrate from granules coated with a polymethacrylate film. Drug Dev Ind Pharm 2000; 26: 323–329
   PubMed Web of Science ®Google Scholar
• Oshlack B, Chasin M, Huan H-P, 2004. Melt-extrusion multiparticulates. US 6706281 B2
   Google Scholar
• Rein R, 2005. Device for producing round pellets. EP 1563897
   Google Scholar
• Rohera B, Parikh N. Influence of plasticizer type and coat level on Surelease® film properties. Pharm Dev Technol 2002; 7: 407–420
   PubMed Web of Science ®Google Scholar
• Saettone MF, Perini G, Rijli P, Rodriguez L, Cini M. Effect of different polymer-plasticizer combinations on in vitro release of theophylline from coated pellets. Int J Pharm 1995; 126: 83–88
   Web of Science ®Google Scholar
• Sauer D, McGinity JW. Influence of additives on melt viscosity, surface tension, and film formation of dry powder coatings. Drug Dev Ind Pharm 2009; 35: 646–654
   PubMed Web of Science ®Google Scholar
• Schilling SU, Bruce CD, Shah NH, Malick AW, McGinity JW. Citric acid monohydrate as a release-modifying agent in melt extruded matrix tablets. Int J Pharm 2008; 361: 158–168
   PubMed Web of Science ®Google Scholar
• Schilling SU, Shah NH, Malick AW, McGinity JW. Properties of melt extruded enteric matrix pellets. Eur J Pharm Biopharm 2010; 74: 352–361
   PubMed Web of Science ®Google Scholar
• Shenoy AV, Saini DR. Fundamentals of polymer melt rheology. Thermoplastic melt rheology and processing. Marcel Dekker, New York 1996; 53–94
   Google Scholar
• Thumma S, ElSohly MA, Zhang SQ, Gul W, Repka MA. Influence of plasticizers on the stability and release of a prodrug of 9-tetrahydrocannabinol incorporated in poly (ethylene oxide) matrices. Eur J Pharm Biopharm 2008; 70: 605–614
   PubMed Web of Science ®Google Scholar
• Timoshenko SP, Goodier JN. Theory of elasticity. McGraw-Hill, New York, Toronto, London 1951
   Google Scholar
• Torrado JJ, Augsburger LL. Effect of different excipients on the tableting of coated particles. Int J Pharm 1994; 106: 149–155
   Web of Science ®Google Scholar
• Verhoeven E, De Beer TRM, Van den Mooter G, Remon JP, Vervaet C. Influence of formulation and process parameters on the release characteristics of ethylcellulose sustained-release mini-matrices produced by hot-melt extrusion. Eur J Pharm Biopharm 2008; 69: 312–319
   PubMed Web of Science ®Google Scholar
• Wang CC, Zhang G, Shah NH, Infeld MH, Malick AW, McGinity JW. Mechanical properties of single pellets containing acrylic polymers. Pharm Dev Technol 1996; 1: 213–222
   PubMedGoogle Scholar
• Wang CC, Zhang G, Shah NH, Infeld MH, Malick WA, McGinity JW. Influence of plasticizers on the mechanical properties of pellets containing Eudragit® RS 30D. Int J Pharm 1997; 152: 153–163
   Web of Science ®Google Scholar
• Wang JS, Porter RS. On the viscosity-temperature behavior of polymer melts. Rheol Acta 1995; 34: 496–503
   Web of Science ®Google Scholar
• Wypych G. Effect of plasticizers on properties of plasticized materials. Handbook of plasticizers, G Wypych. William Andrew, Toronto, New York 2004; 193–204
   Google Scholar
• Young CR, Crowley M, Dietzsch C, McGinity JW. Physicochemical properties of film-coated melt-extruded pellets. J Microencapsul 2007; 24: 57–71
   PubMed Web of Science ®Google Scholar
• Young CR, Dietzsch C, Cerea M, Farrell T, Fegely KA, Rajabi-Siahboomi A, McGinity JW. Physicochemical characterization and mechanisms of release of theophylline from melt-extruded dosage forms based on a methacrylic acid copolymer. Int J Pharm 2005b; 301: 112–120
   PubMed Web of Science ®Google Scholar
• Young CR, Dietzsch C, McGinity JW. Compression of controlled-release pellets produced by a hot-melt extrusion and spheronization process. Pharm Dev Technol 2005a; 10: 133–139
   PubMed Web of Science ®Google Scholar
• Young CR, Koleng JJ, McGinity JW. Production of spherical pellets by a hot-melt extrusion and spheronization process. Int J Pharm 2002; 242: 87–92
   PubMed Web of Science ®Google Scholar
• Young CR, Koleng JJ, McGinity JW. Properties of drug-containing spherical pellets produced by a hot-melt extrusion and spheronization process. J Microencapsul 2003; 20: 613–625
   PubMed Web of Science ®Google Scholar
• Zhu Y, Mehta KA, McGinity JW. Influence of plasticizer level on the drug release from sustained release film coated and hot-melt extruded dosage forms. Pharm Dev Technol 2006; 11: 285–294
   PubMed Web of Science ®Google Scholar
• Zhu Y, Shah NH, Malick AW, Infeld MH, McGinity JW. Solid-state plasticization of an acrylic polymer with chlorpheniramine maleate and triethyl citrate. Int J Pharm 2002; 241: 301–310
   PubMed Web of Science ®Google Scholar