Citations (69)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (2)
Abhay Mishra & Vivek Srivastava. (2021) Biomaterials and 3D printing techniques used in the medical field. Journal of Medical Engineering & Technology 45:4, pages 290-302.
Read now
Read now
Nicolai Adolphs, Weichen Liu, Erwin Keeve & Bodo Hoffmeister. (2013) Craniomaxillofacial surgery planning based on 3D models derived from Cone-Beam CT data. Computer Aided Surgery 18:5-6, pages 101-108.
Read now
Read now
Articles from other publishers (67)
Vjekoslav Kopačin, Ivan Mumlek, Vedran Zubčić, Josip Butković & Luka Šimić. 2024. Advances in Biomedical and Veterinary Engineering. Advances in Biomedical and Veterinary Engineering
81
87
.
Joachim E. Zöller & Alexander Kübler. 2023. Mund-Kiefer-gesichtschirurgie. Mund-Kiefer-gesichtschirurgie
409
423
.
Leon Pope, Darpan Shidid & Kate Fox. 2022. Additive Manufacturing in Biomedical Applications. Additive Manufacturing in Biomedical Applications
115
129
.
Roderick Y. Kim, Fayette Williams & Brent B. Ward. 2022. Management of Complications in Oral and Maxillofacial Surgery. Management of Complications in Oral and Maxillofacial Surgery
395
410
.
Priyanka Kenkare, Shravan Shetty, Utkarsh Mangal, Ashith MV & Siddarth Shetty. (2021) The Utilization of Three-Dimensional Technology for an Accurate Diagnosis and Precise Treatment Planning in the Field of Orthodontics. Biomedical and Pharmacology Journal 14:4, pages 2101-2107.
Crossref
Crossref
Luka Šimić, Vjekoslav Kopačin, Ivan Mumlek, Josip Butković & Vedran Zubčić. (2021) Improved technique of personalised surgical guides generation for mandibular free flap reconstruction using an open-source tool. European Radiology Experimental 5:1.
Crossref
Crossref
Giovanni Gerbino, Umberto Autorino, Elena Giaccone, Andrea Novaresio & Gugliemo Ramieri. (2021) Virtual planning and CAD/CAM-assisted distraction for maxillary hypoplasia in cleft lip and palate patients: Accuracy evaluation and clinical outcome. Journal of Cranio-Maxillofacial Surgery 49:9, pages 799-808.
Crossref
Crossref
Kristopher M. Day, Patrick K. Kelley, Raymond J. Harshbarger, Amir H. Dorafshar, Anand R. Kumar, Derek M. Steinbacher, Pravin Patel, Patrick D. Combs & Jamie P. Levine. (2021) Advanced Three-Dimensional Technologies in Craniofacial Reconstruction. Plastic & Reconstructive Surgery 148:1, pages 94e-108e.
Crossref
Crossref
Hossein Behnia, Saeed Reza Motamedian, Dorsa Ghadiridehkordi, Mohammad Reza Vatankhah & Parsa Behnia. 2021. Integrated Procedures in Facial Cosmetic Surgery. Integrated Procedures in Facial Cosmetic Surgery
737
762
.
Mohammad Elsayed, Nadja Kadom, Comeron Ghobadi, Benjamin Strauss, Omran Al Dandan, Abhimanyu Aggarwal, Yoshimi Anzai, Brent Griffith, Frances Lazarow, Christopher M Straus & Nabile M Safdar. (2020) Virtual and augmented reality: potential applications in radiology. Acta Radiologica 61:9, pages 1258-1265.
Crossref
Crossref
Ramin Javan, Maureen Schickel, Yuanlong Zhao, Terry Agbo, Cullen Fleming, Parisa Heidari, Taha Gholipour, Donald C. Shields & Mohamad Koubeissi. (2019) Using 3D-Printed Mesh-Like Brain Cortex with Deep Structures for Planning Intracranial EEG Electrode Placement. Journal of Digital Imaging 33:2, pages 324-333.
Crossref
Crossref
Stella Leng, Kejd Bici, Flavio Facchini, Yary Volpe, Francesca Uccheddu, Rocco Furferi, Lapo Governi, Monica Carfagni, Marco Ghionzoli & Antonio Messineo. (2019) Customized Cutting Template to Assist Sternotomy in Pectus Arcuatum. The Annals of Thoracic Surgery 107:4, pages 1253-1258.
Crossref
Crossref
Margaret E. Brennan Fournet, Farah Alwani Azaman, Suzan Gunbay, Yuan Yuan Chen & Declan M. Devine. 2019. Polymer-Based Additive Manufacturing. Polymer-Based Additive Manufacturing
121
142
.
Leonid Chepelev, Nicole Wake, Justin Ryan, Waleed Althobaity, Ashish Gupta, Elsa Arribas, Lumarie Santiago, David H Ballard, Kenneth C Wang, William Weadock, Ciprian N Ionita, Dimitrios Mitsouras, Jonathan Morris, Jane Matsumoto, Andy Christensen, Peter Liacouras, Frank J Rybicki & Adnan Sheikh. (2018) Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios. 3D Printing in Medicine 4:1.
Crossref
Crossref
Hee-June Kim, Jaeyeong Park, Ji-Yeon Shin, Il-Hyung Park, Kyeong-Hyeon Park & Hee-Soo Kyung. (2018) More accurate correction can be obtained using a three-dimensional printed model in open-wedge high tibial osteotomy. Knee Surgery, Sports Traumatology, Arthroscopy 26:11, pages 3452-3458.
Crossref
Crossref
S Yim, C Sung, S Miyashita, D Rus & S Kim. (2018) Animatronic soft robots by additive folding. The International Journal of Robotics Research 37:6, pages 611-628.
Crossref
Crossref
Sophy Barber, Lachlan Carter, Christopher Mannion & Claire Bates. (2018) Distraction osteogenesis part 2: technical aspects. Orthodontic Update 11:2, pages 46-54.
Crossref
Crossref
Kristopher M. DayKyle S. GabrickLarry A. Sargent. (2018) Applications of Computer Technology in Complex Craniofacial Reconstruction. Plastic and Reconstructive Surgery - Global Open 6:3, pages e1655.
Crossref
Crossref
Haizum Aimi Zaharin, Ahmad Majdi Abdul Rani, Turnad Lenggo Ginta & Farooq I Azam. (2018) Additive Manufacturing Technology for Biomedical Components: A review. IOP Conference Series: Materials Science and Engineering 328, pages 012003.
Crossref
Crossref
Kataria Rashim, K. Verma Pawan & V.D. Sinha. (2018) Increasing the safety of surgical treatment for complex Cranio-vertebral anomalies using customized 3D printed models. Journal of Clinical Neuroscience 48, pages 203-208.
Crossref
Crossref
Gerald T. Grant, Jayanthi Parthasarathy, Shivakumar Raman, Bruno Azevedo & William C. Scarfe. 2018. Maxillofacial Cone Beam Computed Tomography. Maxillofacial Cone Beam Computed Tomography
1207
1242
.
Jenna N. Winer, Frank J. M. Verstraete, Derek D. Cissell, Steven Lucero, Kyriacos A. Athanasiou & Boaz Arzi. (2017) The application of 3-dimensional printing for preoperative planning in oral and maxillofacial surgery in dogs and cats. Veterinary Surgery 46:7, pages 942-951.
Crossref
Crossref
Paolo Scolozzi & Georges Herzog. (2017) Computer-Assisted Virtual Planning for Surgical Guide Manufacturing and Internal Distractor Adaptation in the Management of Midface Hypoplasia in Cleft Patients. The Cleft Palate-Craniofacial Journal 54:4, pages 457-464.
Crossref
Crossref
I. Chao, J. Young, J. Coles-Black, J. Chuen, L. Weinberg & C. Rachbuch. (2017) The application of three-dimensional printing technology in anaesthesia: a systematic review. Anaesthesia 72:5, pages 641-650.
Crossref
Crossref
Jun-Dae Kwun, Hee-June Kim, Jaeyoung Park, Il-Hyung Park & Hee-Soo Kyung. (2017) Open wedge high tibial osteotomy using three-dimensional printed models: Experimental analysis using porcine bone. The Knee 24:1, pages 16-22.
Crossref
Crossref
Vicknes Waran, Vairavan Narayanan, Ravindran Karrupiah & Chun Yoong Cham. 2017. 3D Printing in Medicine. 3D Printing in Medicine
51
58
.
Jong Woo Choi, Namkug Kim & Chang Mo Hwang. 2017. Salivary Gland Development and Regeneration. Salivary Gland Development and Regeneration
173
191
.
Philip Tack, Jan Victor, Paul Gemmel & Lieven Annemans. (2016) 3D-printing techniques in a medical setting: a systematic literature review. BioMedical Engineering OnLine 15:1.
Crossref
Crossref
David S.C. Soon, Michael P. Chae, Charles H.C. Pilgrim, Warren Matthew Rozen, Robert T. Spychal & David J. Hunter-Smith. (2016) 3D haptic modelling for preoperative planning of hepatic resection: A systematic review. Annals of Medicine and Surgery 10, pages 1-7.
Crossref
Crossref
Stephanie J. Drew. 2016. Vertical Alveolar Ridge Augmentation in Implant dentistry : A Surgical Manual. Vertical Alveolar Ridge Augmentation in Implant dentistry : A Surgical Manual
199
221
.
Parisa Kamali, David Dean, Roman Skoracki, Pieter G. L. Koolen, Marek A. Paul, Ahmed M. S. Ibrahim & Samuel J. Lin. (2016) The Current Role of Three-Dimensional Printing in Plastic Surgery. Plastic and Reconstructive Surgery 137:3, pages 1045-1055.
Crossref
Crossref
Guk Bae KimSangwook LeeHaekang KimDong Hyun YangYoung-Hak KimYoon Soo KyungChoung-Soo KimSe Hoon ChoiBum Joon KimHojin HaSun U. KwonNamkug Kim. (2016) Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology. Korean Journal of Radiology 17:2, pages 182.
Crossref
Crossref
Xin-Bao Wu, Jun-Qiang Wang, Chun-Peng Zhao, Xu Sun, Yin Shi, Zi-An Zhang, Yu-Neng Li & Man-Yi Wang. (2015) Printed Three-dimensional Anatomic Templates for Virtual Preoperative Planning Before Reconstruction of Old Pelvic Injuries. Chinese Medical Journal 128:4, pages 477-482.
Crossref
Crossref
Nicolai Adolphs, Nicole Ernst, Horst Menneking & Bodo Hoffmeister. (2014) Significance of distraction osteogenesis of the craniomaxillofacial skeleton ? A clinical review after 10 years of experience with the technique. Journal of Cranio-Maxillofacial Surgery 42:6, pages 966-975.
Crossref
Crossref
Adrien-Maxence Hespel, Ray Wilhite & Judith Hudson. (2014) INVITED REVIEW-APPLICATIONS FOR 3D PRINTERS IN VETERINARY MEDICINE. Veterinary Radiology & Ultrasound 55:4, pages 347-358.
Crossref
Crossref
Sushant Negi, Suresh Dhiman & Rajesh Kumar Sharma. (2014) Basics and applications of rapid prototyping medical models. Rapid Prototyping Journal 20:3, pages 256-267.
Crossref
Crossref
S-H. WonY-K. LeeY-C. HaY-S. SuhK-H. Koo. (2013) Improving pre-operative planning for complex total hip replacement with a Rapid Prototype model enabling surgical simulation. The Bone & Joint Journal 95-B:11, pages 1458-1463.
Crossref
Crossref
Erin J Smith, Joseph A Anstey, Gabriel Venne & Randy E Ellis. (2013) Using additive manufacturing in accuracy evaluation of reconstructions from computed tomography. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227:5, pages 551-559.
Crossref
Crossref
Neal de Beer & André van der Merwe. (2013) Patient‐specific intervertebral disc implants using rapid manufacturing technology. Rapid Prototyping Journal 19:2, pages 126-139.
Crossref
Crossref
Cosmin Faur, Nicolae Crainic, Carmen Sticlaru & Cristian Oancea. (2013) Rapid prototyping technique in the preoperative planning for total hip arthroplasty with custom femoral componentsRasche Prototypen-Technik in der präoperativen Planung der totalen Hüft-Arthroplastie mit speziell angefertigten femoralen Komponenten. Wiener klinische Wochenschrift 125:5-6, pages 144-149.
Crossref
Crossref
Neal de Beer & Cornie Scheffer. (2012) Reducing subsidence risk by using rapid manufactured patient-specific intervertebral disc implants. The Spine Journal 12:11, pages 1060-1066.
Crossref
Crossref
Vicknes Waran, Roshni Menon, Devaraj Pancharatnam, Alwin Kumar Rathinam, Yuwaraj Kumar Balakrishnan, Tan Su Tung, Rajagopalan Raman, Narayanan Prepageran, Hari Chandran & Zainal Ariff Abdul Rahman. (2012) The Creation and Verification of Cranial Models Using Three-dimensional Rapid Prototyping Technology in Field of Transnasal Sphenoid Endoscopy. American Journal of Rhinology & Allergy 26:5, pages e132-e136.
Crossref
Crossref
Vicknes Waran, P. Devaraj, T. Hari Chandran, K.A. Muthusamy, Alwin Kumar Rathinam, Yuwaraj Kumar Balakrishnan, Tan Su Tung, R. Raman & Z.A.A. Rahman. (2012) Three-dimensional anatomical accuracy of cranial models created by rapid prototyping techniques validated using a neuronavigation station. Journal of Clinical Neuroscience 19:4, pages 574-577.
Crossref
Crossref
Raphael Olszewski. (2012) Surgical Engineering in Cranio-Maxillofacial Surgery: A Literature Review. Journal of Healthcare Engineering 3:1, pages 53-86.
Crossref
Crossref
Miller Smith, Fayette Williams & Brent B. Ward. 2012. Management of Complications in Oral and Maxillofacial Surgery. Management of Complications in Oral and Maxillofacial Surgery
283
316
.
Reza Jarrahy. (2012) Controversies in the Management of Neonatal Micrognathia. Journal of Craniofacial Surgery 23:1, pages 243-249.
Crossref
Crossref
Luis A. Quevedo, Jessica V. Ruiz & Cristobal A. Quevedo. (2011) Using a Clinical Protocol for Orthognathic Surgery and Assessing a 3-Dimensional Virtual Approach: Current Therapy. Journal of Oral and Maxillofacial Surgery 69:3, pages 623-637.
Crossref
Crossref
F. Rengier, A. Mehndiratta, H. von Tengg-Kobligk, C. M. Zechmann, R. Unterhinninghofen, H.-U. Kauczor & F. L. Giesel. (2010) 3D printing based on imaging data: review of medical applications. International Journal of Computer Assisted Radiology and Surgery 5:4, pages 335-341.
Crossref
Crossref
S. Benazzi, E. Stansfield, C. Milani & G. Gruppioni. (2009) Geometric morphometric methods for three-dimensional virtual reconstruction of a fragmented cranium: the case of Angelo Poliziano. International Journal of Legal Medicine 123:4, pages 333-344.
Crossref
Crossref
Uwe Klammert, Hartmut B?hm, Tilmann Schweitzer, Kristian W?rzler, Uwe Gbureck, J?rgen Reuther & Alexander K?bler. (2009) Multi-directional Le Fort III midfacial distraction using an individual prefabricated device. Journal of Cranio-Maxillofacial Surgery 37:4, pages 210-215.
Crossref
Crossref
Stefano Benazzi, Marco Orlandi & Giorgio Gruppioni. (2009) Technical note: Virtual reconstruction of a fragmentary clavicle. American Journal of Physical Anthropology 138:4, pages 507-514.
Crossref
Crossref
Manuel Oliveira, N. Sooraj Hussain, A.G. Dias, M.A. Lopes, Lu?s Azevedo, Hor?cio Zenha, Hor?cio Costa & J.D. Santos. (2008) 3-D biomodelling technology for maxillofacial reconstruction. Materials Science and Engineering: C 28:8, pages 1347-1351.
Crossref
Crossref
Dylan John Murray, Glenn Edwards, James G. Mainprize & Oleh Antonyshyn. (2008) Optimizing Craniofacial Osteotomies: Applications of Haptic and Rapid Prototyping Technology. Journal of Oral and Maxillofacial Surgery 66:8, pages 1766-1772.
Crossref
Crossref
Ralf Sodian, Daniel Schmauss, Mathias Markert, Stefan Weber, Konstantin Nikolaou, Sandra Haeberle, Ferdinand Vogt, Calin Vicol, Tim Lueth, Bruno Reichart & Christoph Schmitz. (2008) Three-Dimensional Printing Creates Models for Surgical Planning of Aortic Valve Replacement After Previous Coronary Bypass Grafting. The Annals of Thoracic Surgery 85:6, pages 2105-2108.
Crossref
Crossref
Axel Thomas Stadie, Ralf Alfons Kockro, Robert Reisch, Andrei Tropine, Stephan Boor, Peter Stoeter & Axel Perneczky. (2008) Virtual reality system for planning minimally invasive neurosurgery. Journal of Neurosurgery 108:2, pages 382-394.
Crossref
Crossref
Stephen J. Golding & Stephen R. Watt-Smith. 2008. Image Processing in Radiology. Image Processing in Radiology
173
182
.
KCP Santos, MEP Dutra, C Costa, CA Lascala, CE Lascala & JX de Oliveira. (2007) Aplasia of the mandibular condyle. Dentomaxillofacial Radiology 36:7, pages 420-422.
Crossref
Crossref
Mathias Markert, Stefan Weber & Tim C. Lueth. (2007) A beating heart model 3D printed from specific patient data. A beating heart model 3D printed from specific patient data.
Shawn Russett, Paul Major, Jason Carey, Roger Toogood & Pierre Boulanger. (2007) An Experimental Method for Stereolithic Mandible Fabrication and Image Preparation. The Open Biomedical Engineering Journal 1:1, pages 4-10.
Crossref
Crossref
Wellingson Silva Paiva, Robson Amorim, Douglas Alexandre França Bezerra & Marcos Masini. (2007) Aplication of the stereolithography technique in complex spine surgery. Arquivos de Neuro-Psiquiatria 65:2b, pages 443-445.
Crossref
Crossref
Ralf Sodian, Stefan Weber, Mathias Markert, Darius Rassoulian, Ingo Kaczmarek, Tim C. Lueth, Bruno Reichart & Sabine Daebritz. (2007) Stereolithographic Models for Surgical Planning in Congenital Heart Surgery. The Annals of Thoracic Surgery 83:5, pages 1854-1857.
Crossref
Crossref
Wan Abdul Rahman Wan Harun, V. Devadass & I. A. Aziz. 2007. World Congress on Medical Physics and Biomedical Engineering 2006. World Congress on Medical Physics and Biomedical Engineering 2006
2632
2635
.
Gopikrishna Kakarala, Andrew D. Toms & Jan-Herman Kuiper. (2006) Stereolithographic models for biomechanical testing. The Knee 13:6, pages 451-454.
Crossref
Crossref
Douglas P. Sinn, Joseph E. CilloJrJr & Brett A. Miles. (2006) Stereolithography for Craniofacial Surgery. Journal of Craniofacial Surgery 17:5, pages 869-875.
Crossref
Crossref
Daniel B. Spagnoli & Steven G. Gollehon. (2006) Distraction Osteogenesis in Reconstruction of the Mandible and Temporomandibular Joint. Oral and Maxillofacial Surgery Clinics of North America 18:3, pages 383-398.
Crossref
Crossref
S. Nakajima, H. Arimoto, H. Rensha & T. Toriu. (2006) Measurement of a Translation and a Rotation of a Tooth after an Orthodontic Treatment Using GA. Measurement of a Translation and a Rotation of a Tooth after an Orthodontic Treatment Using GA.
W. Kater, R. Seeberger, R. Davids & D. Schäfer. (2005) CT-basierte Distraktion des Unterkiefers mit Gelenkrekonstruktion und Impaktation der Maxilla bei KiefergelenkankyloseCT assisted mandibular osteodistraction with reconstruction of the temporomandibular joint and two piece maxilla. Mund-, Kiefer- und Gesichtschirurgie 10:1, pages 50-55.
Crossref
Crossref