Cristina Suárez, Alejandra Forero, Daniel Monsalvo, Alejandra Taborda & Dario Londoño. (2020) Evaluación costo-efectividad de las prótesis con superficie cerámica-polietileno vs. metal-polietileno para reemplazo articular primario de cadera en Colombia. Revista Colombiana de Ortopedia y Traumatología 34:3, pages 223-230.
Crossref
T. Matsushita & H. Takahashi. 2019. Metals for Biomedical Devices. Metals for Biomedical Devices
431
473
.
. 2019. Alumina Ceramics. Alumina Ceramics
509
539
.
Patricia O. Cubillos, Vinícius O. dos Santos, André Luiz A. Pizzolatti, Edison da Rosa & Carlos R.M. Roesler. (2018) Evaluation of Surface Finish and Dimensional Control of Tribological Metal-Ultra High Molecular Weight Polyethylene Pair of Commercially Available Hip Implants. The Journal of Arthroplasty 33:3, pages 939-944.
Crossref
D. Huten, H. Common, T. Gicquel & F. Basselot. 2017. La Prothèse Totale de Hanche dans Tous ses états. La Prothèse Totale de Hanche dans Tous ses états
99
112
.
S.L. Smith & T.J. Joyce. 2017. Mechanical Testing of Orthopaedic Implants. Mechanical Testing of Orthopaedic Implants
183
206
.
Paola Taddei, Silvia Tozzi, Simone Carmignato & Saverio Affatato. (2016) May the surface roughness of the retrieved femoral head influence the wear behavior of the polyethylene liner?. Journal of Biomedical Materials Research Part B: Applied Biomaterials 104:7, pages 1374-1385.
Crossref
Murat Ali, Mazen Al-Hajjar, Susan Partridge, Sophie Williams, John Fisher & Louise M Jennings. (2016) Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 230:5, pages 389-397.
Crossref
Y-H. KimJ-W. ParkJ-S. Kim. (2015) Isolated revision of an acetabular component to a ceramic-on-ceramic bearing in patients under 50 years of age. The Bone & Joint Journal 97-B:9, pages 1197-1203.
Crossref
Sachiyuki Tsukada, Motohiro Wakui & Munenori Matsueda. (2013) Uncemented third-generation ceramic-on-ceramic total hip arthroplasty using metal acetabular shell with direct taper locking liner. Archives of Orthopaedic and Trauma Surgery 133:6, pages 861-868.
Crossref
C. M. JackD. O. MolloyW. L. WalterB. A. ZicatW. K. Walter. (2013) The use of ceramic-on-ceramic bearings in isolated revision of the acetabular component. The Bone & Joint Journal 95-B:3, pages 333-338.
Crossref
Won-Sik ChoyKap Jung KimSang Ki LeeKyoung Wan BaeYoon Sub HwangChang Kyu Park. (2013) Ceramic-on-Ceramic Total Hip Arthroplasty: Minimum of Six-Year Follow-up Study. Clinics in Orthopedic Surgery 5:3, pages 174.
Crossref
X. Flecher, S. Parratte,J.M. Aubaniac & J.N. Argenson,. 2013. Wear of Orthopaedic Implants and Artificial Joints. Wear of Orthopaedic Implants and Artificial Joints
298
309
.
Francesco Benazzo, Loris Perticarini, Claudia Russo & Alberto Combi. 2013. Total Hip Arthroplasty. Total Hip Arthroplasty
27
35
.
Taishi Sato, Yasuharu Nakashima, Mio Akiyama, Takuaki Yamamoto, Taro Mawatari, Takashi Itokawa, Masanobu Ohishi, Goro Motomura, Masanobu Hirata & Yukihide Iwamoto. (2012) Wear resistant performance of highly cross-linked and annealed ultra-high molecular weight polyethylene against ceramic heads in total hip arthroplasty. Journal of Orthopaedic Research 30:12, pages 2031-2037.
Crossref
Taishi Sato, Yasuharu Nakashima, Mio Akiyama, Takuaki Yamamoto, Taro Mawatari, Takashi Itokawa, Masanobu Ohishi, Goro Motomura, Masanobu Hirata & Yukihide Iwamoto. (2012) Comparison of Polyethylene Wear between Highly Crosslinked and Annealed UHMWPE and Conventional UHMWPE against Ceramic Heads in Total Hip Arthroplasty. Key Engineering Materials 529-530, pages 279-284.
Crossref
Feng-Chih Kuo, Hao-Chen Liu, Wun-Schen Chen & Jun-Wen Wang. (2012) Ceramic-on-ceramic Total Hip Arthroplasty: Incidence and Risk Factors of Bearing Surface–related Noises in 125 Patients. Orthopedics 35:11.
Crossref
Allison Brown, Yatin Kirane & Zakary Knutson. 2012. Osteoarthritis: Linking Basic Science to Intervention. Osteoarthritis: Linking Basic Science to Intervention
1
47
.
A P Harsha & T J Joyce. (2011) Challenges associated with using bovine serum in wear testing orthopaedic biopolymers. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 225:10, pages 948-958.
Crossref
Tomiharu MATSUSHITA & Tadashi KOKUBO. (2010) Performance Improvement of Joint Prosthesis and Its Future Tasks. Journal of the Japan Society for Technology of Plasticity 51:590, pages 182-186.
Crossref
T. Matsushita. 2010. Metals for Biomedical Devices. Metals for Biomedical Devices
329
354
.
Jun-Dong Chang, Rutuj Kamdar, Je-Hyun Yoo, Mina Hur & Sang-Soo Lee. (2009) Third-Generation Ceramic-on-Ceramic Bearing Surfaces in Revision Total Hip Arthroplasty. The Journal of Arthroplasty 24:8, pages 1231-1235.
Crossref
William N. Capello, James A. D'Antonio, Judy R. Feinberg, Michael T. Manley & Marybeth Naughton. (2008) Ceramic-on-Ceramic Total Hip Arthroplasty: Update. The Journal of Arthroplasty 23:7, pages 39-43.
Crossref
Zhinian Wan, Myriam Boutary & Lawrence D. Dorr. (2008) The Influence of Acetabular Component Position on Wear in Total Hip Arthroplasty. The Journal of Arthroplasty 23:1, pages 51-56.
Crossref
V?ctor M. Ilizaliturri S?nchez, Gerardo Mangino Pariente & Javier Camacho Galindo. (2007) Tratamiento quir?rgico de la osteoartritis en la cadera: actualidades en artroplastia total de cadera. Reumatolog?a Cl?nica 3, pages S57-S62.
Crossref
S. Affatato, A. Leardini, W. Leardini, S. Giannini & M. Viceconti. (2007) Meniscal wear at a three-component total ankle prosthesis by a knee joint simulator. Journal of Biomechanics 40:8, pages 1871-1876.
Crossref
Young-Ho Kim. 2007. Bioceramics and Alternative Bearings in Joint Arthroplasty. Bioceramics and Alternative Bearings in Joint Arthroplasty
49
57
.
James A. D’Antonio, William N. Capello, Benjamin Bierbaum, Michael Manley & Marybeth Naughton. (2006) Ceramic-on-Ceramic Bearings for Total Hip Arthroplasty: 5-9 Year Follow-Up. Seminars in Arthroplasty 17:3-4, pages 146-152.
Crossref
L.M. Brunner & T.A. Tervoort. 2006. Encyclopedia of Materials: Science and Technology. Encyclopedia of Materials: Science and Technology
1
8
.
D. A. Dennis, R. D. Komistek & M. R. Mahfouz. 2006. Bioceramics and Alternative Bearings in Joint Arthroplasty. Bioceramics and Alternative Bearings in Joint Arthroplasty
81
92
.
James A D???Antonio, William N Capello, Michael T Manley, Marybeth Naughton & Kate Sutton. (2005) A Titanium-encased Alumina Ceramic Bearing for Total Hip Arthroplasty. Clinical Orthopaedics and Related Research 441:&NA;, pages 151-158.
Crossref
James D???Antonio, William Capello, Michael Manley, Marybeth Naughton & Kate Sutton. (2005) Alumina Ceramic Bearings for Total Hip Arthroplasty. Clinical Orthopaedics and Related Research &NA;:436, pages 164-171.
Crossref
Keiichi Kawanabe, Kenji Tanaka, Jiro Tamura, Motoyuki Shimizu, Eijiro Onishi, Hirokazu Iida & Takashi Nakamura. (2005) Effect of alumina femoral head on clinical results in cemented total hip arthroplasty: old versus current alumina. Journal of Orthopaedic Science 10:4, pages 378-384.
Crossref
YOUNG-HOO KIM, ALLAN RITCHIE & CATH HARDAKER. (2005) SURFACE ROUGHNESS OF CERAMIC FEMORAL HEADS AFTER IN VIVO TRANSFER OF METAL. The Journal of Bone and Joint Surgery-American Volume 87:3, pages 577-582.
Crossref
M. Manley & K. Sutton. 2005. Bioceramics and Alternative Bearings in Joint Arthroplasty. Bioceramics and Alternative Bearings in Joint Arthroplasty
191
195
.
G. de la Herrán & J. Usabiaga. (2004) Propiedades de lubricación del líquido sinovial en la artroplastia total de cadera. Revista Española de Cirugía Ortopédica y Traumatología 48:3, pages 218-224.
Crossref
B. E. Bierbaum, J. D’Antonio, W. Capello, M. Manley & R. Deshmukh. 2004. Bioceramics in Joint Arthroplasty. Bioceramics in Joint Arthroplasty
21
34
.
EDUARDO GARCIA-CIMBRELO, ANA CRUZ-PARDOS, ROSARIO MADERO & MIGUEL ORTEGA-ANDREU. (2003) TOTAL HIP ARTHROPLASTY WITH USE OF THE CEMENTLESS ZWEYMÜLLER ALLOCLASSIC SYSTEM. The Journal of Bone and Joint Surgery-American Volume 85:2, pages 296-303.
Crossref
James D'Antonio, William Capello & Michael Manley. (2003) Alumina Ceramic Bearings for Total Hip Arthroplasty. Orthopedics 26:1, pages 39-46.
Crossref
Ch. Hendrich, S. Goebel, Ch. Roller, S. Kirschner & J. M. Martell. 2003. Bioceramics in Joint Arthroplasty. Bioceramics in Joint Arthroplasty
177
182
.
RICHARD D. KOMISTEK, DOUGLAS A. DENNIS, JORGE A. OCHOA, BRIAN D. HAAS & CURT HAMMILL. (2002) IN VIVO COMPARISON OF HIP SEPARATION AFTER METAL-ON-METAL OR METAL-ON-POLYETHYLENE TOTAL HIP ARTHROPLASTY. The Journal of Bone and Joint Surgery-American Volume 84:10, pages 1836-1841.
Crossref
James D'Antonio, William Capello, Michael Manley & Benjamin Bierbaum. (2002) New experience with alumina-on-alumina ceramic bearings for total hip arthroplasty. The Journal of Arthroplasty 17:4, pages 390-397.
Crossref
S. Affatato, B. Bordini, C. Fagnano, P. Taddei, A. Tinti & A. Toni. (2002) Effects of the sterilisation method on the wear of UHMWPE acetabular cups tested in a hip joint simulator. Biomaterials 23:6, pages 1439-1446.
Crossref
Keiji Haraguchi, Nobuhiko Sugano, Takashi Nishii, Takashi Sakai, Hideki Yoshikawa & Kenji Ohzono. (2001) Analysis of Survivorship After Total Hip Arthroplasty Using a Ceramic Head. Clinical Orthopaedics and Related Research 391, pages 198-209.
Crossref
S. Affatato, B. Fernandes, A. Tucci, L. Esposito & A. Toni. (2001) Isolation and morphological characterisation of UHMWPE wear debris generated in vitro. Biomaterials 22:17, pages 2325-2331.
Crossref
Durgadas P. Sakalkale, Peter F. Sharkey, Kenneth Eng, William J. Hozack & Richard H. Rothman. (2001) Effect of Femoral Component Offset on Polyethylene Wear in Total Hip Arthroplasty. Clinical Orthopaedics and Related Research 388, pages 125-134.
Crossref
Douglas A. Dennis, Richard D. Komistek, Eric J. Northcut, Jorge A. Ochoa & Allan Ritchie. (2001) “In vivo” determination of hip joint separation and the forces generated due to impact loading conditions. Journal of Biomechanics 34:5, pages 623-629.
Crossref
S Affatato. (2001) Mixed oxides prosthetic ceramic ball heads. Part 3: effect of the ZrO2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro wear study. Biomaterials 22:7, pages 717-723.
Crossref
H. Graichen & L. Zichner. 2001. Verankerungsprinzipien in der Hüftendoprothetik. Verankerungsprinzipien in der Hüftendoprothetik
16
21
.
Ian C. Clarke & Allen Gustafson. (2000) Clinical and Hip Simulator Comparisons of Ceramic-on-Polyethylene and Metal-on-Polyethylene Wear. Clinical Orthopaedics and Related Research 379, pages 34-40.
Crossref
Adolph V. LombardiJrJr, Thomas H. Mallory, Douglas A. Dennis, Richard D. Komistek, Robert A. Fada & Eric J. Northcut. (2000) An in vivo determination of total hip arthroplasty pistoning during activity. The Journal of Arthroplasty 15:6, pages 702-709.
Crossref
S. Affatato, E. Ghisolfi, G.L. Cacciari & A. Toni. (2018) Alumina Femoral Head Fracture: An in Vitro Study. The International Journal of Artificial Organs 23:4, pages 256-260.
Crossref
I. Bos. (2018) Histological Investigation of Polyethylene Particles in Total Hip Replacement: Ceramic versus Metal Heads. HIP International 10:3, pages 151-160.
Crossref
Marius von Knoch, Charles A. EnghSrSr, Christi J. Sychterz, C. Anderson EnghJrJr & Hans-Georg Willert. (2000) Migration of polyethylene wear debris in one type of uncemented femoral component with circumferential porous coating. The Journal of Arthroplasty 15:1, pages 72-78.
Crossref
S. Affatato, M. Frigo & A. Toni. (2000) Anin vitro investigation of diamond-like carbon as a femoral head coating. Journal of Biomedical Materials Research 53:3, pages 221-226.
Crossref
S. Affatato, M. Testoni, G.L. Cacciari & A. Toni. (1999) Mixed-oxides prosthetic ceramic ball heads. Part II: effect of the ZrO2 fraction on the wear of ceramic on ceramic joints. Biomaterials 20:20, pages 1925-1929.
Crossref
S. Affatato, M. Tagliati & A. Toni. (2018) Hip Prothesis: An in Vitro Wear Protocol Based on a Comparison between Gravimetric and Profilometric Analysis. The International Journal of Artificial Organs 22:4, pages 226-229.
Crossref
Pekka Paavolainen, Eero Pukkala, Pekka Pulkkinen & Tuomo Visuri. (1999) Cancer incidence in finnish hip replacement patients from 1980 to 1995. The Journal of Arthroplasty 14:3, pages 272-280.
Crossref
Christi J. Sychterz, C. Anderson EnghJr.Jr., Steven W. Swope, Donald E. McNulty & Charles A. Engh. (1999) Analysis of Prosthetic Femoral Heads Retrieved at Autopsy. Clinical Orthopaedics and Related Research 358, pages 223???234.
Crossref
Vesa Saikko. (1998) A multidirectional motion pin-on-disk wear test method for prosthetic joint materials. Journal of Biomedical Materials Research 41:1, pages 58-64.
Crossref
Wesley P. Phipatanakul, Sherry A. Johnson, Victoria Good & Ian C. Clarke. (1998) The fallacy of evaluating biomaterial wear-rates with water as lubricant: A hip simulator study of alumina-PTFE and CoCr-PTFE combinations. Journal of Biomedical Materials Research 39:2, pages 229-233.
Crossref
Jordan A. Simon, Alan J. Dayan, Enrique Ergas, Steven A. Stuchin & Paul E. Di Cesare. (1998) Catastrophic failure of the acetabular component in a ceramic-polyethylene bearing total hip arthroplasty. The Journal of Arthroplasty 13:1, pages 108-113.
Crossref
Tiina Ahlroos & Vesa Saikko. (1997) Wear of prosthetic joint materials in various lubricants. Wear 211:1, pages 113-119.
Crossref
R J A Bigsby, C S Hardaker & J Fisher. (1997) Wear of ultra-high molecular weight polyethylene acetabular cups in a physiological hip joint simulator in the anatomical position using bovine serum as a lubricant. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 211:3, pages 265-269.
Crossref
Z Lu & H McKellop. (2005) Frictional heating of bearing materials tested in a hip joint wear simulator. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 211:1, pages 101-108.
Crossref
J B Medley, J J Krygier, J D Bobyn, F W Chan, A Lippincott & M Tanzer. (2005) Kinematics of the MATCO™ hip simulator and issues related to wear testing of metal-metal implants. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 211:1, pages 89-99.
Crossref
J G Lancaster, D Dowson, G H Isaac & J Fisher. (2005) The wear of ultra-high molecular weight polyethylene sliding on metallic and ceramic counterfaces representative of current femoral surfaces in joint replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 211:1, pages 17-24.
Crossref
G. Willmann, H.J. Früh & H.G. Pfaff. (1996) Wear characteristics of sliding pairs of zirconia (Y-TZP) for hip endoprostheses. Biomaterials 17:22, pages 2157-2162.
Crossref
R M Hall, A Unsworth, P Siney & B M Wroblewski. (2016) Wear in Retrieved Charnley Acetabular Sockets. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 210:3, pages 197-207.
Crossref
Vesa O Saikko. (2016) A Three-Axis Hip Joint Simulator for Wear and Friction Studies on Total Hip Prostheses. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 210:3, pages 175-185.
Crossref
Jonathan Black. (1996) Metal on Metal Bearings. Clinical Orthopaedics and Related Research 329, pages S244-S255.
Crossref
John B. Medley, Frank W. Chan, Jan J. Krygier & J. Dennis Bobyn. (1996) Comparison of Alloys and Designs in a Hip Simulator Study of Metal on Metal Implants. Clinical Orthopaedics and Related Research 329, pages S148-S159.
Crossref
Per Aspenberg, Asko Anttila, Yrjo T. Konttinen, Reijo Lappalainen, Stuart B. Goodman, Lars Nordsletten & Seppo Santavirta. (1996) Benign response to particles of diamond and SiC: bone chamber studies of new joint replacement coating materials in rabbits. Biomaterials 17:8, pages 807-812.
Crossref
Victoria D. Good, Ian C. Clarke & Lucas Anissian. (1996) Water and bovine serum lubrication compared in simulator PTFE/CoCr wear model. Journal of Biomedical Materials Research 33:4, pages 275-283.
Crossref
R M Hall, A Unsworth, P S Craig, C Hardaker, P Siney & B M Wroblewski. (2016) Measurement of Wear in Retrieved Acetabular Sockets. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 209:4, pages 233-242.
Crossref
V. Saikko. (1994) Wear of polyethylene acetabular cups against zirconia femoral heads studied with a hip joint simulator. Wear 176:2, pages 207-212.
Crossref
B. Derbyshire, J. Fisher, D. Dowson, C. Hardaker & K. Brummitt. (1994) Comparative study of the wear of UHMWPE with zirconia ceramic and stainless steel femoral heads in artificial hip joints. Medical Engineering & Physics 16:3, pages 229-236.
Crossref