Experimental and numerical study on lateral response of pile-group for offshore wind turbines in sand

Abstract

In this study, a series of centrifuge tests are performed to investigate the ultimate lateral capacity of a pile group for offshore wind turbines. The validated Finite element models (FEMs) are established. The rotation center and the maximum bending moment occur at 9 D and 3 D of the pile length. A sensitivity study is performed by considering the soil parameters through numerical tests. The internal friction angle is the most influential factor by introducing 32% change in lateral capacity. The key factors of pile number, pile diameter, loading height, and pile spacing are investigated in the following parametric study. Increasing the pile number and the pile diameter is effective for enhancing the lateral capacity. In contrast, a larger eccentricity has a negative effect on the foundation stability. The failure mode of the pile group foundation tends to change from strain softening to strain hardening when the loading height reaches a threshold magnitude. The p-multiplier is calculated to demonstrate the shadowing effect in a pile group foundation. An optimal design method is proposed by integrating the pile number and the pile spacing factors. This study provides some instructions for the application of pile group foundations in the offshore wind industry.

Keywords:

• Offshore wind turbines
• pile group foundation
• design optimization
• centrifuge test
• FEM
• p-multiplier

Disclosure statement

No potential conflict of interest was reported by the authors.

Additional information

Funding

The funding supports from the National Natural Science Foundation of China (No.51909054, No.51908185) are gratefully acknowledged.