Abstract
A feedback strategy of drying control of mate leaves in a thin-layer conveyor-belt dryer was experimentally evaluated. Moisture content in the discharge of the continuous dryer was controlled by manually adjusting the speed of the moving belt between 3.7 × 10−4 and 15.2 × 10−4 m s−1 for approximately 7200 s in 120 s time steps. The sets of PID controller parameters and manipulated conveyor velocities were computed with a dynamic drying model at conditions identical to those found in the closed-loop experiments. The model is represented by a system of two partial differential equations built by energy and solute mass balances in the solid phase of the dryer. A large set of experimental drying curves and temperature of mate leaves as a function of drying time, in the temperature range from 55 to 130°C, confirmed the reliability of the considered model. Experimental closed-loop responses of discharge moisture content in the presence of disturbances in the feed moisture content (≈ 0.5 − 1.7 dry basis) and variations in set-point (≈ 0.1 − 1.0 dry basis) validated the suggested control scheme.
Notes
Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/ldrt.