Drying of biofuels from the forest—A review

ABSTRACT

The literature during 2000–2016 about drying of biofuels from the forest has been reviewed. Biofuels constitute a low-cost energy resource that is likely to continue to increase and the dryers for such products should be simple, robust, and easy to operate. In 1970s and 1980s, rotary dryers and flash dryers were the most common types, and in 1990s, superheated steam (SHS) dryers became common. Maintenance costs and use of medium pressure steam for the SHS dryers are important topics to consider and one drawback for the rotary dryers is that high-temperature heat sources are used. The development during the last 15 years has moved toward moving bed dryers because of the possibility to use cheap low-temperature energy sources, robust design, and direct capacity control that is achieved by controlling the air temperature in the dryer. A price for the dry biofuel of 15–20 Euro/MWh has been indicated to make a dryer installation profitable based on no cost for the thermal energy and 40 Euro/MWh as the cost for the electrical energy. Shrinkage and the internal transport of moisture and heat in large particles of biofuels will need more considerations in the future. Fractionation of the biofuels, codrying with other products, the total cost for the drying process, environmental issues, and development of drying processes operating at high dew points are the other things to consider.

KEYWORDS:

• Bed dryer
• biofuels
• costs
• drying
• modeling
• review
• superheated steam

Acknowledgments

Henrik Ström and Alberto Alamia are greatly acknowledged for the drawing of the integrated steam dryer shown in Fig. 2.