Drying of biofuels from the forest—A review

References

• Wimmerstedt, R. Recent advances in biofuel drying. Chemical Engineering and Processing 1999, 38(4–6), 441–447.
   Web of Science ®Google Scholar
• Wimmerstedt, R. Drying of peat and biofuels. In Handbook of Industrial Drying; Mujumdar, A.S., Eds.; CRC Press: Boca Raton, FL, 2007; 743–753.
   Google Scholar
• Dev, S.R.S.; Raghavan, G.S.V. Advancements in drying techniques for food, fiber and fuel. Drying Technology 2012, 30(11–12), 1147–1159.
   Web of Science ®Google Scholar
• Barrozo, M.A.S.; Mujumdar, A.S.; Freire, J.T. Air drying of seeds: A review. Drying Technology 2014, 32(10), 1127–1141.
   Web of Science ®Google Scholar
• Berge, C., Dejfors, C. Driftserfarenheter från ångtorkar och direkta rökgastorkar (in Swedish). Värmeforsk report number 681, 2000.
   Google Scholar
• Jensen, A.S.; Larsen, K. Large scale drying in superheated steam under pressure. Presented at the 19th International Drying Symposium (IDS 2014), Lyon, France, 2014.
   Google Scholar
• Mujumdar, A.S. Superheated steam drying. In Handbook of Industrial Drying; Mujumdar, A.S., Ed.; CRC Press: Boca Raton, FL, 2007; 439–452.
   Google Scholar
• Björk, H. From laboratory to system – Studies of superheated steam drying of biofuel. Ph.D. thesis. Department of Chemical Engineering Design, Chalmers University of Technology, 2001.
   Google Scholar
• Johansson, I. Drying of biofuels at high dewpoints. Licentiate thesis. Department of Chemical Engineering, Lund University, 2002.
   Google Scholar
• Berghel, J.; Renström, R. Usefulness and significance of energy and mass balances of a fluidized superheated steam dryer. Drying Technology 2001, 19(6), 1083–1098.
   Web of Science ®Google Scholar
• Berghel, J.; Renström, R. Basic design criteria and corresponding results performance of a pilot scale fluidized superheated atmospheric condition steam dryer. Biomass and Bioenergy 2002, 23(2), 103–112.
   Web of Science ®Google Scholar
• Renström, R.; Berghel, J. Drying of sawdust in an atmospheric pressure spouted bed steam dryer. Drying Technology 2002, 20(2), 449–464.
   Web of Science ®Google Scholar
• Berghel, J.; Renström, R. Controllability of product moisture content when nonscreened sawdust is dried in a spouted bed. Drying Technology 2004, 22(3), 507–519.
   Web of Science ®Google Scholar
• Berghel, J. The gas-to-particle heat transfer and hydrodynamics in spouted bed drying of sawdust. Drying Technology 2005, 23(5), 1027–1041.
   Web of Science ®Google Scholar
• Berghel, J.; Nilsson, L.; Renström, R. Particle mixing and residence time when drying sawdust in a continuous spouted bed. Chemical Engineering and Processing 2008, 47(8), 1246–1251.
   Web of Science ®Google Scholar
• Berghel, J.; Renström, R. Analysis of superheated steam drying of sawdust in spouted bed from design perspective. In Proceedings 17th International Drying Symposium (IDS 2010), Magdeburg, Germany, 2010, 1234–1241.
   Google Scholar
• Berghel, J. The effect of using a heating tube in an existing spouted bed superheated steam dryer. Drying Technology 2011, 29(2), 183–188.
   Web of Science ®Google Scholar
• Berghel, J.; Renström, R. An experimental study on the influence of using a draft tube in a continuous spouted bed dryer. Drying Technology 2014, 32(5), 519–527.
   Web of Science ®Google Scholar
• Berghel, J.; Renström, R. Superheated steam drying of sawdust in continuous feed spouted beds – A design perspective. Biomass and Bioenergy 2014, 71, 228–234.
   Web of Science ®Google Scholar
• Berghel, J. Improved fluidized bed drying technology for wood fuels. Ph.D. thesis. Department of Environmental and Energy Systems, Karlstad University, 2004.
   Google Scholar
• Renström, R. Energy efficient wood fuel drying. Ph.D. thesis. Department of Environmental and Energy Systems, Karlstad University, 2004.
   Google Scholar
• Kovenskii, V.I.; Borodulya, V.A.; Teplitskii, Y.S.; Palchenok, G.I.; Slizhuk, D.S. Modeling of superheated-steam drying of biofuel in a fluidized bed. Journal of Engineering Physics and Thermophysics 2010, 83(4), 764–769.
   Google Scholar
• Ghoshdastidar, P.S.; Agarwal, A. Simulation and optimization of drying of wood chips with superheated steam in a rotary kiln. Proceedings of the ASME Summer Heat Transfer Conference HT 2008, 2008.
   Google Scholar
• Fagernäs, L.; Brammer, J.; Wilén, C.; Lauer, M.; Verhoeff, F. Drying of biomass for second generation synfuel production. Biomass and Bioenergy 2010, 34(9), 1267–1277.
   Web of Science ®Google Scholar
• Wahlund, B.; Yan, J.; Westermark, M. A total energy system of fuel upgrading by drying biomass feedstock for cogeneration: A case study of Skellefteå bioenergy combine. Biomass and Bioenergy 2002, 23(4), 271–281.
   Web of Science ®Google Scholar
• Andersson, E.; Harvey, S.; Berntsson, T. Energy efficient upgrading of biofuel integrated with a pulp mill. Energy 2006, 31(10–11), 1384–1394.
   Web of Science ®Google Scholar
• Isaksson, J.; Åsblad, A.; Berntsson, T. Influence of dryer type on the performance of a biomass gasification combined cycle co-located with an integrated pulp and paper mill. Biomass and Bioenergy 2013, 59, 336–347.
   Web of Science ®Google Scholar
• Alamia, A.; Ström, H.; Thunman, H. Design of an integrated dryer and conveyor belt for woody biofuels. Biomass and Bioenergy 2015, 77, 92–109.
   Web of Science ®Google Scholar
• Ström, H.; Thunman, H. CFD simulations of biofuel bed conversion: A submodel for the drying and devolatilization of thermally thick wood particles. Combustion and Flame 2003, 160(2), 417–431.
   Web of Science ®Google Scholar
• Li, H.; Chen, Q.; Zhang, X.; Finney, K.N.; Sharifi, V.N.; Swithenbank, J. Evaluation of a biomass drying process using waste heat from process industries: A case study. Applied Thermal Engineering 2012, 35, 71–80.
   Web of Science ®Google Scholar
• Pakowski, Z.; Krupinska, B.; Adamski, R. Prediction of sorption equilibrium both in air and superheated steam drying of energetic variety of willow Salix viminalis in a wide temperature range. Fuel 2007, 86(12–13), 1749–1757.
   Web of Science ®Google Scholar
• Pakowski, Z.; Adamski, R. Transport coefficients in biomass (Salix viminalis) during drying with superheated steam. In Proceedings 15th International Drying Symposium (IDS 2006), Budapest, Hungary, 2006; 1778–1785.
   Google Scholar
• Pakowski, Z.; Druzdzel, A.; Adamski, R.; Krupinska, B. Superheated steam drying of wood chips in a flash dryer – Experiments and simulation. In Proceedings 15th International Drying Symposium (IDS 2006), Budapest, Hungary, 2006; 1732–1738.
   Google Scholar
• Schwartze, J.P.; Bröcker, S. A theoretical explanation for the inversion temperature. Chemical Engineering Journal 2002, 86(1–2), 61–67.
   Web of Science ®Google Scholar
• Costa, V.A.F.; Neto da Silva, F.; Ruivo, C.R. A new approach to the inversion temperature. In Proceedings 14th International Drying Symposium (IDS 2004), São Paulo, Brazil, 2004; 177–184.
   Google Scholar
• Messai, S.; Sghaier, J.; Belghith, A. Superheated steam drying humid air drying and the inversion temperature. In Proceedings 15th International Drying Symposium (IDS 2006), Budapest, Hungary, 2006; 415–422.
   Google Scholar
• Krokida, M.; Marinos-Kouris, D.; Mujumdar, A.S. Rotary drying. In Handbook of Industrial Drying, Mujumdar, A.S., Ed.; CRC Press Taylor and Frances Group: Boca Raton, 2007; 151–172.
   Google Scholar
• Pang, S.; Mujumdar, A.S. Drying of woody biomass for bioenergy: Drying technologies and optimization for an integrated bioenergy plant. Drying Technology 2010, 28(5), 690–701.
   Web of Science ®Google Scholar
• Hosseinabadi, H.Z.; Layeghi, M.; Berthold, D.; Doosthosseini, K.; Shahhosseini, S. Mathematical modeling the drying of poplar wood particles in a closed-loop triple pass rotary dryer. Drying Technology 2014; 32(1), 55–67.
   Web of Science ®Google Scholar
• Hosseinabadi, H.Z.; Layeghi, M.; Doosthosseini, K.; Berthold, D.; Shahhosseini, S. Simulation of wood particle motion through a concurrent triple pass rotary dryer. Drying Technology 2014, 32(12), 1409–1422.
   Web of Science ®Google Scholar
• Xu, Q.; Pang, S. Mathematical modeling of rotary drying of woody biomass. Drying Technology 2008, 26(11), 1344–1350.
   Web of Science ®Google Scholar
• Zabaniotou, A.A. Simulation of forestry biomass drying in a rotary dryer. Drying Technology 2000, 18(7), 1415–1431.
   Web of Science ®Google Scholar
• Ståhl, M.; Berghel, J. Validation of a mathematical model by studying the effects of recirculation of drying gases. Drying Technology 2008, 26(6), 786–792.
   Web of Science ®Google Scholar
• Coskun, C.; Bayraktar, M.; Oktay, Z.; Dincer, I. Energy and exergy analyses of an industrial wood chips drying process. International Journal of Low Carbon Technologies 2009, 4(4), 224–229.
   Google Scholar
• Cocco, D.; Deiana, P.; Cau, G. Performance evaluation of small size externally fired gas turbine (EFGT) power plants integrated with direct biomass dryers. Energy 2006, 31, 1459–1471.
   Web of Science ®Google Scholar
• Puadian, N.; Li, J.; Pang, S. Analysis of operation parameters in a dual fluidized bed biomass gasifier integrated with a biomass rotary dryer: Development and application of a system model. Energies 2014, 7, 4342–4363.
   Web of Science ®Google Scholar
• Karlsson, E.; Truedsson, I.; Stenström, S. Uppbyggnad av flexibel pilottork för produkter som biobränslen och järnmalmspellets (in Swedish). Värmeforsk Technical Report 1087, 2009.
   Google Scholar
• Holmberg, A.; Stenström, S. Drying of bark from three different Scandinavian species in a pilot dryer. In Proceedings 5th European Drying Conference, October 21–23, Budapest, Hungary, 2015.
   Google Scholar
• Huttunen, M.; Holmberg, A.; Stenström, S. Modeling fixed-bed drying of bark. Drying Technology 2017, 35(1), 97–107.
   Web of Science ®Google Scholar
• Holmberg, A.; Stenström, S. Dewatering and drying of bark. International Journal of Energy Engineering 2014, 4(2A), 8–16.
   Google Scholar
• Holmberg, A.; Wadsö, L.; Stenström, S. Water vapor sorption and diffusivity in bark. Drying Technology 2016, 34(2), 150–160.
   Web of Science ®Google Scholar
• Holmberg, H.; Ahtila, P.; Ahtila, O. Experimental study on drying of bark in fixed beds. Drying Technology 2011, 29(8), 953–960.
   Web of Science ®Google Scholar
• Myllymaa, T.; Holmberg, H.; Hillamo, H.; Laajalehto, T.; Ahtila, P. Wood chip drying in fixed beds: Drying kinetics and economics of drying at a municipal combined heat and power plant site. Drying Technology 2015, 33(2), 205–215.
   Web of Science ®Google Scholar
• Wood fuel and peat prices. Swedish official statistics EN 0307 SM 1504, 2016.
   Google Scholar
• Holmberg, H.; Ahtila, P. Simulation model for the model-based control of a biofuel dryer at an industrial combined heat and power plant. Drying Technology 2006, 24(12), 1547–1557.
   Web of Science ®Google Scholar
• Holmberg, H.; Ahtila, P. Comparison of drying costs in biofuel drying between multi-stage and single-stage drying. Biomass and Bioenergy 2004, 26(6), 515–530.
   Web of Science ®Google Scholar
• Bengtsson, P. Development towards an efficient and sustainable biofuel drying. Ph.D. thesis. School of Technology and Design, Växjö University, 2009.
   Google Scholar
• Bengtsson, P. Experimental analysis of low-temperature bed drying of wooden biomass particles. Drying Technology 2008, 26(5), 602–610.
   Web of Science ®Google Scholar
• Lerman, P.; Wennberg, O. Experimental method for designing a biomass bed dryer. Biomass and Bioenergy 2011, 35(Suppl. 1), 531–539.
   Google Scholar
• Yrjölä, J.; Saastamoinen, J.J. Comparison of moving bed dryers of solids operating in parallel and counterflow modes. Drying Technology 2005, 23(5), 1003–1005.
   Web of Science ®Google Scholar
• Yrjölä, J. Production of dry wood chips in connection with a district heating plant. Thermal Science 2004, 8(2), 143–155.
   Google Scholar
• Saastamoinen, J.J. Comparison of moving bed dryers of solids operating in parallel and counterflow modes. Drying Technology 2005, 23(5), 1003–1005.
   Web of Science ®Google Scholar
• Schlünder, E.U. Drying of porous material during the constant and the falling rate period: A critical review of existing hypotheses. Drying Technology 2004, 22(6), 1517–1532.
   Web of Science ®Google Scholar
• Yang, H.; Milota, M.R. Modeling the process of drying biomass in a fixed bed. Forest Products Journal 2013, 63(5/6), 148–154.
   Web of Science ®Google Scholar
• Pang, S.; Xu, Q. Drying of woody biomass for bioenergy using packed moving bed dryer: Mathematical modeling and optimization. Drying Technology 2010, 28(5), 702–709.
   Web of Science ®Google Scholar
• Peters, B.; Schröder, E.; Bruch, C.; Nussbaumer, T. Measurements and particle resolved modelling of heat-up and drying of a packed bed. Biomass and Bioenergy 2002, 23(4), 291–306.
   Web of Science ®Google Scholar
• di Blasi, C.; Branca, C.; Sparano, S.; la Mantia, B. Drying characteristics of wood cylinders for conditions pertinent to fixed-bed countercurrent gasification. Biomass and Bioenergy 2003, 25(1), 45–58.
   Web of Science ®Google Scholar
• Fritzell, E.; Melander, O.; Rasmuson, A. The drying kinetics and equilibrium moisture content of MDF fibers. Drying Technology 2009, 27(9), 993–998.
   Web of Science ®Google Scholar
• Perré, P. Multiscale modeling of drying as a powerful extension of the macroscopic approach: Application to solid wood and biomass processing. Drying Technology 2010, 28(8), 944–959.
   Web of Science ®Google Scholar
• Colin, J.; Rémond, R.; Perré, P. Design and optimization of industrial woody biomass pretreatment addressed by a multiscale computational model: Particle, bed and dryer levels. Presented at the 19th International Drying Symposium (IDS 2014), Lyon, France, 2014.
   Google Scholar
• Li, J.; Fraikin, L.; Salmon, T.; Toye, D.; Léonard, A. Convective drying of sawdust/sludge mixtures in a fixed bed: The effect of sludge origin. Presented at the 19th International Drying Symposium (IDS 2014), Lyon, France, 2014.
   Google Scholar
• Li, J.; Bennamoun, L.; Fraikin, L.; Salmon, T.; Toye, D.; Schreinemachers, R.; Léonard, A. Analysis of shrinkage effect on mass transfer during convective drying of sawdust/sludge mixtures. Drying Technology 2014, 32(14), 1706–1717.
   Web of Science ®Google Scholar
• Li, J.; Fraikin, L.; Salmon, T.; Bennamoun, L.; Toye, D.; Schreinemachers, R.; Léonard, A. Analysis of shrinkage effect on mass transfer during convective drying of sawdust/sludge mixtures. Drying Technology 2015, 33(6), 704–712.
   Web of Science ®Google Scholar
• Li, J.; Fraikin, L.; Salmon, T.; Plougonven, E.; Toye, D.; Léonard, A. Convective drying behavior of saw-dust sludge mixtures in a fixed bed. Drying Technology 2016, 34(4), 395–402.
   Web of Science ®Google Scholar
• Gigler, J.K.; van Loon, W.K.P.; Vissers, M.M.; Bot, G.P.A. Forced convective drying of willow chips. Biomass and Bioenergy 2000, 19(4), 259–270.
   Web of Science ®Google Scholar
• Frodeson, S.; Berghel, J.; Renström, R. The potential of using two-step drying techniques for improving energy efficiency and increasing drying capacity in fuel pellet industries. Drying Technology 2013, 31(15), 1863–1870.
   Web of Science ®Google Scholar
• Lostec, B.L.; Galanis, N.; Baribeault, J.; Millette, J. Wood chip drying with an absorption heat pump. Energy 2008, 33(3), 500–512.
   Web of Science ®Google Scholar
• Srinivasakannan, C.; Balasubramaniam, N. Drying of rubber wood sawdust using tray dryer. Particulate Science and Technology 2006, 24(4), 427–439.
   Web of Science ®Google Scholar
• Phanphanich, M.; Mani, S. Drying characteristics of pine forest residues. BioResources 2009, 5(1), 108–121.
   Web of Science ®Google Scholar
• Law, C.L.; Mujumdar, A.S. Fluidized bed dryers. In Handbook of Industrial Drying; Mujumdar, A.S.; CRC Press: Boca Raton, FL, 2007; 173–201.
   Google Scholar
• Moreno, R.; Rios, R.; Calbucura, H. Batch vibrating fluid bed dryer for sawdust particles: Experimental results. Drying Technology 2000, 18(7), 1481–1493.
   Web of Science ®Google Scholar
• Moreno, R.; Rios, R. Study of sawdust drying techniques in fluidised bed. Biosystems Engineering 2002, 82(3), 321–329.
   Web of Science ®Google Scholar
• Moreno, R.; Antolin, G.; Reyes, A.; Alvarez, P. Drying characteristics of forest biomass particles of Pinus radiate. Biosystems Engineering 2004, 88(1), 105–115.
   Web of Science ®Google Scholar
• Reyes, A.; Vega, R.; Garcia, G. Drying of sawdust in a pulsed fluidized bed. Drying Technology 2008, 26(4), 476–486.
   Web of Science ®Google Scholar
• Eliaers, P.; De Wilde, J. Drying of biomass particles: Experimental study and comparison of the performance of a conventional fluidized bed and a rotating fluidized bed in a static geometry. Drying Technology 2013, 31(2), 236–245.
   Web of Science ®Google Scholar
• Ciesielczyk, W. Novel gas distributor for fluidized bed drying of biomass. Drying Technology 2009, 27(12), 1309–1315.
   Web of Science ®Google Scholar
• Aziz, M.; Fushimi, C.; Kansha, Y.; Mochidzuki, K.; Kaneko, S.; Tsutsumi, A.; Matsumoto, K.; Hashimoto, T.; Kawamoto, N.; Oura, K.; Yokohama, K.; Yamaguchi, Y.; Kinoshita, M. Innovative energy-efficient biomass drying based on self heat recuperation technology. In Proceedings 17th International Drying Symposium (IDS 2010), Magdeburg, Germany, 2010; 729–737.
   Google Scholar
• Liu, Y.; Aziz, M.; Kansha, Y.; Tsutsumi, A. Drying energy saving by applying self-heat recuperation technology to biomass drying system. Chemical Engineering Transactions 2012, 29, 577–582.
   Google Scholar
• Sudbrock, F.; Kruggel-Emden, H.; Wirtz, S.; Scherer, V. Convective drying of agitated silica gel and beech wood particle beds – Experiments and transient DEM-CFD simulations. Drying Technology 2015, 33(15–16), 1808–1820.
   Web of Science ®Google Scholar
• Cui, H.; Grace, J.R. Spouting of biomass particles. Bioresource Technology 2008, 99(10), 4008–4020.
   PubMed Web of Science ®Google Scholar
• Olazar, M.; Lopez, G.; Altzibar, H.; Amutio, M.; Bilbao, J. Drying of biomass in a conical spouted bed with different types of internal devices. Drying Technology 2012, 30(2), 207–216.
   Web of Science ®Google Scholar
• Lopez, G.; Altzibar, H.; Olazar, M.; Bilbao, J. Drying of biomass in a draft tube conical spouted bed. In Proceedings 17th International Drying Symposium (IDS 2010), Magdeburg, Germany, 2010; 1377–1383.
   Google Scholar
• Passos, M.L.; Trindade, A.L.G.; d’Angelo, J.V.H.; Cardoso, M. Drying of black liquor in spouted bed of inert particles. Drying Technology 2004, 22(5), 1041–1067.
   Web of Science ®Google Scholar
• Poós, T.; Örvös, M.; Legeza, L. Development and thermal modeling of a new construction biomass dryer. Drying Technology 2013, 31(16), 1919–1929.
   Web of Science ®Google Scholar
• Bhattarai, S.; Oh, J.-H.; Euh, S.-H.; Kim, D.H.; Yu, L. Simulation study for pneumatic conveying drying of sawdust for pellet production. Drying Technology 2014, 32(10), 1142–1156.
   Web of Science ®Google Scholar
• Renström, J.; Berghel, J. Experimental results from drying sawdust below the fiber saturation point using a vertical pneumatic dryer. Presented at the 19th International Drying Symposium (IDS 2014), Lyon, France, 2014.
   Google Scholar
• Pang, S. Mathematical modelling of MDF fibre drying: Drying optimisation. Drying Technology 2000, 18(7), 1433–1448.
   Web of Science ®Google Scholar
• Pang, S. Improving MDF fibre drying operation by application of a mathematical model. Drying Technology 2001, 19(8), 1789–1805.
   Web of Science ®Google Scholar
• Melander, O.; Rasmuson, A. Mathematical modelling of heat, mass and momentum transport in MDF fiber drying. Drying Technology 2011, 29(1), 64–72.
   Web of Science ®Google Scholar
• Du, G.; Wang, S.; Cai, Z. Microwave drying of wood strands. Drying Technology 2005, 23(12), 2421–2436.
   Web of Science ®Google Scholar
• He, X.; Lau, A.; Sokhansanj, S.; Lim, J.; Bi, X. Application of a model to simulate the wetting and drying processes of woody biomass in the field. Drying Technology 2015, 33(4), 434–442.
   Web of Science ®Google Scholar
• Holmberg, H.; Ahtila, P. Evaluation of energy efficiency in biofuel drying by means of energy and exergy analyses. Applied Thermal Engineering 2005, 25(17–18), 3115–3128.
   Web of Science ®Google Scholar
• Renström, R. The potential of improvements in the energy system of sawmills when coupled dryers are used for drying of wood fuels and wood products. Biomass and Bioenergy 2006, 30(5), 452–460.
   Web of Science ®Google Scholar
• Renström, R. Mean residence time and residence time distribution when sawdust is dried in continuous dryers. Drying Technology 2008, 26(12), 1457–1463.
   Web of Science ®Google Scholar
• Kobayashi, J.; Itaya, Y.; Tsukada, S.; Mizuno, K.; Ueda, M., Morikawa, H., Sugimoto, T., Ueda, Y., Oshika, Y., Kobayashi, N., Hatano, S., Mori, S. Study on the drying technology of woody biomass for fine grinding by vibration mills. In Proceedings 15th International Drying Symposium (IDS 2006), Budapest, Hungary, 2006; 1739–1744.
   Google Scholar
• Martynenko, A. The system of correlations between moisture, shrinkage, density, and porosity. Drying Technology 2008, 26(12), 1497–1500.
   Web of Science ®Google Scholar
• Jumah, R.Y.; Mujumdar, A.S. Dryer emission control systems. In Handbook of Industrial Drying, Mujumdar, A.S.; CRC Press: Boca Raton, FL, 2007; 1041–1074.
   Google Scholar
• Karlsson, T. Terpene release during drying of wood flakes for particleboard manufacture. Licentiate thesis. Department of Chemical Engineering, Lund University, 2001.
   Google Scholar
• Granström, K. Emissions of volatile organic compounds from wood. Ph.D. thesis. Department of Environmental and Energy Systems, Karlstad University, 2005.
   Google Scholar
• Granström, K. Utsläpp av lättflyktiga kolväten vid torkning av biobränslen (in Swedish). Värmeforsk report number 745, 2001.
   Google Scholar
• Granström, K.; Javeed, A. Emissions from sawdust in packed moving bed dryers and subsequent pellet production. Drying Technology 2016, 34(3), 258–266.
   Web of Science ®Google Scholar
• Ståhl, M.; Granström, K.; Berghel, J.; Renström, R. Industrial processes for biomass drying and their effects on the quality properties of wood pellets. Biomass and Bioenergy 2004, 27(6), 621–628.
   Web of Science ®Google Scholar
• Milota, M.R. Emissions from biomass in a rotary dryer. Forest Products Journal 2013, 63(5/6), 155–161.
   Web of Science ®Google Scholar
• Danielsson, S.; Rasmuson, A. The influence of drying medium, temperature and time on the release of monoterpenes during convective drying of wood chips. Drying Technology 2002, 20(7), 1427–1444.
   Web of Science ®Google Scholar
• Spets, J.-P.; Ahtila, P. Reduction of organic emissions by using a multistage drying system for wood-based biomasses. Drying Technology 2004, 22(3), 541–561.
   Web of Science ®Google Scholar
• Pang, S. Guest editorial biomass drying: Areas for future R&D needs and sustainable energy development. Drying Technology 2008, 26(6), 623–624.
   Web of Science ®Google Scholar