ABSTRACT
AA6061-T6 and AA7075-T6 materials find wide application in manufacturing industries due to their excellent engineering properties. Fusion welding generates solidification cracks, high residual stresses, and brittle intermetallic compounds that degrade joint qualities. To solve these difficulties, friction stir processing (FSP) is frequently employed, which improves joint properties through local microstructural refinement. In this study, the combined effect of FSP parameters, namely tool pin profile (TPF), tool rotation speed (TRS), and travel speed (TS), on tungsten inert gas (TIG) weld properties was investigated. Response surface methodology (RSM)-based mathematical models were developed to predict responses, namely ultimate tensile strength (UTS), impact toughness (IT), microhardness (MH), and residual stress (RS). The optimal FSP parameters were determined through the desirability function technique. Post-FSP increased the UTS, IT, and MH of TIG welds by 71.51%, 95.40%, and 72.46%, respectively, and decreased the RS by 58.46%. ANOVA findings exhibited that TPF was the most influential parameter, followed by TRS and TS. The dissimilar aluminium TIG+FSP joints showed an optimal UTS of 282.08 MPa, an IT of 17.32 J, a MH of 121.48 HV, and an RS of 22.09 MPa when using a TRS of 1108.49 rpm and a TS of 37.74 mm/min with a THF pin.
Acknowledgements
The authors extend their heartfelt appreciation to Prof. Qasim Murtaza from the Department of Mechanical Engineering at Delhi Technological University, Delhi, for providing the experimental setup and his lab support that significantly contributed to the successful completion of this research.
Disclosure statement
No potential conflict of interest was reported by the author(s).
Data availability statement
The data that support the findings of this study are available from the corresponding author upon reasonable request.