Fabrication of tungsten inert gas-welded dissimilar aluminium joints using different friction stir processing tools through response surface method

References

• Abdullah ME, Rohim MN, Mohammed MM, et al. Effects of partial-contact tool tilt angle on friction stir welded aa 1050 aluminum joint properties. Materials. 2023;16(11):4091. doi: 10.3390/ma16114091
   PubMed Web of Science ®Google Scholar
• Derazkola HA, Elyasi M. Cooling-assist friction stir welding: A case study on AA6068 aluminum alloy and copper joint. Proc Inst Mech Eng B J Eng Manuf. 2023. doi: 10.1177/09544054231209779
   Web of Science ®Google Scholar
• Bin Reyaz MS, Sinha AN. An experimental investigation on mechanical characteristics and wear behaviour of TIG welded dissimilar aluminum alloys. J Adhes Sci Technol. 2023:1–36. doi: 10.1080/01694243.2023.2251782
   Google Scholar
• Bin Reyaz MS, Sinha AN. Effect of heat input on microstructure and mechanical properties of automated tungsten inert gas-welded dissimilar AA6061-T6 and AA7075-T6 Joints. J Mater Eng Perform. 2023. doi: 10.1007/s11665-023-09026-6
   Google Scholar
• Bokov DO, Jawad MA, Suksatan W, et al. Effect of pin shape on thermal history of aluminum-steel friction stir welded joint: Computational fluid dynamic modeling and validation. Materials. 2021;14(24):7883. doi: 10.3390/ma14247883
   PubMed Web of Science ®Google Scholar
• Elyasi M, Taherian J, Hosseinzadeh M, et al. The effect of pin thread on material flow and mechanical properties in friction stir welding of AA6068 and pure copper. Heliyon. 2023;9(4):e14752. doi: 10.1016/j.heliyon.2023.e14752
   PubMed Web of Science ®Google Scholar
• Shamanian M, Mostaan H, Safari M, et al. Friction stir modification of GTA 7075-T6 Al alloy weld joints: EBSD study and microstructural evolutions. Arch Civil Mech Eng. 2017;17(3):574–585. doi: 10.1016/j.acme.2017.01.002
   Web of Science ®Google Scholar
• Hadavi MR, Yarmohammad Touski H, Jafari H, et al. Effect of friction stir processing on microstructure, mechanical properties, and corrosion fatigue behavior of AA5083-H111 Metal inert gas welded joint. J Mater Eng Perform. 2021;30(8):5763–5772. doi: 10.1007/s11665-021-05783-4
   Web of Science ®Google Scholar
• Sajed M, Guerrero JWG, Derazkola HA. A literature survey on electrical-current-assisted friction stir welding. Appl Sci. 2023;13(3):1563. doi: 10.3390/app13031563
   Google Scholar
• Khalaf HI, Al-Sabur R, Derazkola HA. Effect of number of tool shoulders on the quality of steel to magnesium alloy dissimilar friction stir welds. Arch Civil Mech Eng. 2023;23:125. doi: 10.1007/s43452-023-00673-z
   Web of Science ®Google Scholar
• Derazkola HA, Kubit A. Thermal analysis of revolution pitch effects on friction stir welding of polypropylene. Int J Adv Manuf Technol. 2024;130:1421–1437. doi: 10.1007/s00170-023-12831-x
   Web of Science ®Google Scholar
• Aghajani Derazkola H, Kordani N, Mohammadi Abokheili R. Investigation of joining mechanism of electrical-assist friction stir joining between polyethylene (PE) and 316 stainless steel. Arch Civil Mech Eng. 2022;22:199. doi: 10.1007/s43452-022-00524-3
   Web of Science ®Google Scholar
• da Silva J, Costa JM, Loureiro A, et al. Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing. Mater Des. 2013;51:315–322. doi: 10.1016/j.matdes.2013.04.026
   Web of Science ®Google Scholar
• Bin Reyaz MS, Sinha AN. Improving tensile strength, impact toughness and wear resistance of TIG welded dissimilar AA7075-T6/AA6061-T6 joints through friction stir processing. Int J Interact Des Manuf. 2024. doi: 10.1007/s12008-023-01691-0
   Google Scholar
• Mehdi H, Mishra RS. Investigation of mechanical properties and heat transfer of welded joint of AA6061 and AA7075 using TIG+FSP welding approach. J Adv Join Proce. 2020;1:100003. doi: 10.1016/j.jajp.2020.100003
   Google Scholar
• Mabuwa S, Msomi V. Comparative analysis between normal and submerged friction stir processed friction stir welded dissimilar aluminium alloy joints. J Mater Res Technol. 2020;9(5):9632–9644. doi: 10.1016/j.jmrt.2020.06.024
   Google Scholar
• Mehdi H, Mishra RS. Effect of friction stir processing on microstructure and mechanical properties of TIG welded joint of AA6061 and AA7075. Metall Microstruct Anal. 2020;9:403–418. doi: 10.1007/s13632-020-00640-7
   Web of Science ®Google Scholar
• Rajendran C, Srinivasan K, Balasubramanian V, et al. Identifying the combination of friction stir welding parameters to attain maximum strength of AA2014-T6 aluminum alloy joints. Adv Mater Process Technol. 2018;4(1):100–119. doi: 10.1080/2374068X.2017.1410687
   Google Scholar
• Msomi V, Mabuwa S. Experimental investigation of bending and tensile strength of friction stir processed TIG-welded AA5083-H111 joint. Eng Res Exp. 2020;2(4):045005. doi: 10.1088/2631-8695/abbd8b
   Google Scholar
• Safeen W, Hussain S, Wasim A, et al. Predicting the tensile strength, impact toughness, and hardness of friction stir-welded AA6061-T6 using response surface methodology. Int J Adv Manuf Technol. 2016;87(5–8):1765–1781. doi: 10.1007/s00170-016-8565-9
   Web of Science ®Google Scholar
• Azam M, Jahanzaib M, Wasim A, et al. Surface roughness modeling using RSM for HSLA steel by coated carbide tools. Int J Adv Manuf Technol. 2015;78(5–8):1031–1041. doi: 10.1007/s00170-014-6707-5
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. An experimental analysis and optimization of process parameters of AA6061 and AA7075 welded joint by TIG+FSP welding using RSM. Adv Mater Process Technol. 2022;8(1):598–620. doi: 10.1080/2374068X.2020.1829952
   Google Scholar
• Mabuwa S, Msomi V. The effect of FSP conditions towards microstructure and mechanical properties of the AA6082/AA8011 TIG-welded joint. Mater Res Express. 2021;8(6):066514. doi: 10.1088/2053-1591/ac0735
   Web of Science ®Google Scholar
• Bin Reyaz MS, Sinha AN. Investigation on the influence of FSP parameters on TIG welded dissimilar aluminum joints using RSM and desirability function approach. Proc Inst Mech Eng C: J Mech Eng Sci. 2024. doi: 10.1177/09544062241231165
   Web of Science ®Google Scholar
• Devireddy K, Devuri V, Cheepu M, et al. Analysis of the influence of friction stir processing on gas tungsten arc welding of 2024 aluminum alloy weld zone. Int J Mech Eng Res Dev. 2018;8(1):243–252. doi: 10.24247/ijmperdfeb201828
   Google Scholar
• Myśliwiec P, Kubit A, Derazkola HA, et al. Feasibility study on dissimilar joint between Alclad AA2024–T3 and DC04 steel by friction stir welding. Mater Today Commun. 2024;38:108167. doi: 10.1016/j.mtcomm.2024.108167
   Web of Science ®Google Scholar
• Fan G, Tomków J, Abdullah ME, et al. Investigation on polypropylene friction stir joint: effects of tool tilt angle on heat flux, material flow and defect formation. J Mater Res Technol. 2023;23:715–729. doi: 10.1016/j.jmrt.2023.01.028
   Google Scholar
• Msomi V, Mabuwa S, Muribwathoho O, et al. Effect of tool geometry on microstructure and mechanical properties of submerged friction stir processed AA6082/AA8011 joints. Mater Today Proc. 2021;46:638–644. doi: 10.1016/j.matpr.2020.11.580
   Google Scholar
• Xu X, Zhang C, Derazkola HA, et al. UFSW tool pin profile effects on properties of aluminium-steel joint. Vacuum. 2021;192:110460. doi: 10.1016/j.vacuum.2021.110460
   Web of Science ®Google Scholar
• Bin Reyaz MS, Sinha AN. Analysis of mechanical properties and optimization of tungsten inert gas welding parameters on dissimilar AA6061-T6 and AA7075-T6 by a response surface methodology-based desirability function approach. Eng Optim. 2023;2023:1–32. doi: 10.1080/0305215X.2023.2230133
   Google Scholar
• Bin Reyaz MS, Sinha AN. Parametric optimization and characterization of AA6061-T6 and AA7075-T6 Tungsten inert gas welding joints subjected to friction stir processing. J Mater Eng Perform. 2024. doi: 10.1007/s11665-023-09111-w
   Web of Science ®Google Scholar
• Liu JF, Guo YB. Residual stress modeling in electric discharge machining (EDM) by Incorporating massive random discharges. Procedia CIRP. 2016;45:299–302. doi: 10.1016/j.procir.2016.02.060
   Google Scholar
• Wang G, Han F, Zhu L. Influence of energy input process on the white layer and residual stress in electrical discharge machining. Int J Adv Manuf Technol. 2022;119(7–8):4925–4937. doi: 10.1007/s00170-022-08657-8
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Microstructure and mechanical characterization of tungsten inert gas-welded joint of AA6061 and AA7075 by friction stir processing. Proc Inst Mech Eng, Part L: J Mater: Des Appl 2021;235:2531–2546. 10.1177/14644207211007882
   Google Scholar
• Vidyarthy RS, Dwivedi DK, Muthukumaran V. Optimization of A-TIG process parameters using response surface methodology. Mater Manuf Processes. 2018;33(7):709–717. doi: 10.1080/10426914.2017.1303154
   Web of Science ®Google Scholar
• Koli Y, Yuvaraj N, Aravindan S. Multi-response mathematical model for optimization of process parameters in CMT welding of dissimilar thickness AA6061-T6 and AA6082-T6 alloys using RSM-GRA coupled with PCA. Adv Ind Manuf Eng. 2021;2(2):100050. doi: 10.1016/j.aime.2021.100050
   Google Scholar
• Kiaee N, Aghaie-Khafri M. Optimization of gas tungsten arc welding process by response surface methodology. Mater Des. 2014;54:25–31. doi: 10.1016/j.matdes.2013.08.032
   Web of Science ®Google Scholar
• Karthikeyan M. Effect of tool travel speed on tensile strength of friction stir welded dissimilar joint of aluminium AA6061 T6 alloy and maraging M250 steel. Mater Res Express. 2021;8(2):026502. doi: 10.1088/2053-1591/abde57
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Effect of friction stir processing on mechanical properties and wear resistance of tungsten inert gas welded joint of dissimilar aluminum alloys. J Mater Eng Perform. 2021;30(3):1926–1937. doi: 10.1007/s11665-021-05549-y
   Web of Science ®Google Scholar
• Kadaganchi R, Gankidi MR, Gokhale H. Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology. Defence Technol. 2015;11(3):209–219. doi: 10.1016/j.dt.2015.03.003
   Web of Science ®Google Scholar
• Jain R, Pal SK, Singh SB. Investigation on effect of pin shapes on temperature, material flow and forces during friction stir welding: A simulation study. Proc Inst Mech Eng B J Eng Manuf. 2019;233:1980–1992. doi: 10.1177/0954405418805615
   Web of Science ®Google Scholar
• Roeen GA, Yousefi SG, Emadi R, et al. Remanufacturing the AA5052 GTAW welds using friction stir processing. Metals (Basel). 2021;11(5):749. doi: 10.3390/met11050749
   Web of Science ®Google Scholar
• Salah AN, Mabuwa S, Mehdi H, et al. Effect of Multipass FSP on Si-rich TIG Welded joint of dissimilar aluminum alloys AA8011-H14 and AA5083-H321: EBSD and microstructural evolutions. Silicon. 2022;14(15):9925–9941. doi: 10.1007/s12633-022-01717-4
   Web of Science ®Google Scholar
• Bin Reyaz MS, Sinha AN, Mehdi H, et al. Effect of pulsed tig welding parameters on the microstructural evolution and mechanical properties of Dissimilar AA6061-T6 and AA7075-T6 weldments. Arab J Sci Eng. 2023. doi: 10.1007/s13369-023-08563-5
   Google Scholar
• Raturi M, Bhattacharya A. Mechanical strength and corrosion behavior of dissimilar friction stir welded AA7075-AA2014 joints. Mater Chem Phys. 2021;262:124338. doi: 10.1016/j.matchemphys.2021.124338
   Web of Science ®Google Scholar
• Tariq M, Khan I, Hussain G, et al. Microstructure and micro-hardness analysis of friction stir welded bi-layered laminated aluminum sheets. Int J Lightweight Mater Manuf. 2019;2(2):123–130. doi: 10.1016/j.ijlmm.2019.04.010
   Google Scholar
• Lee DH, Jeong IJ, Kim KJ. A desirability function method for optimizing mean and variability of multiple responses using a posterior preference articulation approach. Qual Reliab Eng Int. 2018;34(3):360–376. doi: 10.1002/qre.2258
   Web of Science ®Google Scholar
• Madhavan S, Kamaraj M, Vijayaraghavan L, et al. Microstructure and mechanical properties of aluminium/steel dissimilar weldments: effect of heat input. Mater Sci Technol. 2017;33(2):200–209. doi: 10.1080/02670836.2016.1176716
   Web of Science ®Google Scholar
• Bhattacharyya M, Gnaupel-Herold T, Raja KS, et al. Evaluation of residual stresses in isothermal friction stir welded 304L stainless steel plates. Mater Sci Eng A. 2021;826:141982. doi: 10.1016/j.msea.2021.141982
   Web of Science ®Google Scholar
• Lin J, Ma N, Lei Y, et al. Measurement of residual stress in arc welded lap joints by cosα X-ray diffraction method. J Mater Process Technol. 2017;243:387–394. doi: 10.1016/j.jmatprotec.2016.12.021
   Web of Science ®Google Scholar
• Roy JG, Yuvaraj N. Effect of welding parameters on mechanical properties of cold metal transfer welded thin AISI 304 stainless-steel sheets. Trans Indian Inst Met. 2021;74(9):2397–2408. doi: 10.1007/s12666-021-02326-2
   Web of Science ®Google Scholar
• Song G, Wang Z, Liu Z, et al. Effect of partial rolling on the microstructure and mechanical properties of laser-TIG hybrid welded joints of 7075-T6 aluminum alloy. Int J Adv Manuf Technol. 2022;121(1–2):589–599. doi: 10.1007/s00170-022-09287-w
   Web of Science ®Google Scholar