182
Views
0
CrossRef citations to date
0
Altmetric
Technical Papers

Optimization Studies of Elemental Composition of Composite Polymer for Neutron Shielding Using Factorial Design Analysis

ORCID Icon, , &
Pages 1192-1204 | Received 15 Mar 2021, Accepted 07 Dec 2021, Published online: 24 Feb 2022
 

Abstract

The present study is envisaged with an aim to highlight a novel approach of applying the statistical factorial design analysis (FDA) technique in radiation shielding design. In FDA, the estimated total dose rate (TDR) and concentration of elements in shielding material are termed as “Response” and “Factors.” The impact on the response due to the change in the level of factors is defined as “Effects.” Monte Carlo simulation (MCS) is performed using the MCNP4A code to compute the surface TDRs due to the coupled neutron-gamma field arising from the 740-GBq 241Am-Be source housed inside a shielding container made of composite polymer (CP). The composition of CP is hydrogen, carbon, and oxygen with lead and natural boron as fillers. In the present work, the weight percent of hydrogen, carbon, and lead is optimized in the CP by minimizing the surface TDR at the exit of the shield, and a proposed CP (PCP) is obtained. For the first time, a detailed regression analysis is performed to develop a model linking TDR and the three factors, namely, hydrogen weight percent, carbon weight percent, and lead weight percent. Three levels of each factor are considered, and the impact due to the linear, quadratic, and interaction effects of the factors that influences the TDR is investigated using Student’s t-test analysis. The results from the statistical analysis indicate that the weight percent of hydrogen and lead have a greater influence on TDR. The interaction effects arising out of the combination of hydrogen, carbon, and lead are observed to be negligible. Hence, the regression model is modified by dropping the statistically insignificant terms from the equation, and the new model has shown excellent correlation within ±1% of the estimated TDRs using MCS. The R2 and R2Adj values are found to be 0.99970 and 0.99966, which explains the computation power of the model. The model can be applied to compute the TDRs for any combinations of factors within the range of variability as studied in the present work. The shielding container made of PCP obtained from the present study provides a minimum of 20% reduction in volume and mass compared to the conventional high-density polyethylene and other polymer-based materials.

Acknowledgments

The authors thank Dr. R. Venkatesan, Head, Radiological & Environmental Safety Division (RESD) and Smt. M. Menaka, Head, Radiation Application & Metrology Section (RAMS), RESD, Indira Gandhi Centre for Atomic Research (IGCAR) for their support in carrying out the work.

Disclosure Statement

 No potential conflict of interest was reported by the authors.

Log in via your institution

Log in to Taylor & Francis Online

PDF download + Online access

  • 48 hours access to article PDF & online version
  • Article PDF can be downloaded
  • Article PDF can be printed
USD 61.00 Add to cart

Issue Purchase

  • 30 days online access to complete issue
  • Article PDFs can be downloaded
  • Article PDFs can be printed
USD 439.00 Add to cart

* Local tax will be added as applicable

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.