References
- N. OZBAY et al., “Full Factorial Experimental Design Analysis of Reactive Dye Removal by Carbon Adsorption,” J. Chem., 2013, 1 (2013); https://doi.org/https://doi.org/10.1155/2013/234904.
- S. FAROOQ et al., “Process Optimization Studies of Crystal Violet Dye Adsorption onto Novel, Mixed Metal Ni0.5Co0.5Fe2O4ferrospinel Nanoparticles Using Factorial Design,” J. Water Process Eng., 16, 132 (2017); https://doi.org/https://doi.org/10.1016/j.jwpe.2017.01.001.
- N. BARKA et al., “Full Factorial Experimental Design Applied to Oxalic Acid Photocatalytic Degradation in TiO2 Aqueous Suspension,” Arabian J. Chem., 7, 752 (2014); https://doi.org/https://doi.org/10.1016/j.arabjc.2010.12.015.
- L. KUMAR et al., “Full Factorial Design for Optimization, Development and Validation of HPLC Method to Determine Valsartan in Nanoparticles,” Saudi Pharma. J., 23, 549 (2015).
- S. MOTRI et al., “Application of Factorial Design to the Study of the Effect of Drying Conditions on α-Tocopherol Content in Prickly Pear Seed Oil,” J. New Sci., 19, 8, 759 (2015).
- M. M. AHMAD et al., “Application of Factorial Design to the Stress Phenomenon of Bacillus Cereus (ATCC 14579) Growth,” Australian J. Basic and Appl. Sci., 10, 17, 148 (2016).
- Y. BOUNOURI et al., “Optimization and Modeling of Synthesis Parameters of Neodymium (III) Bromide by Dry Method Using Full Factorial Design Analysis,” Arabian J. Chem., 13, 366 (2020); https://doi.org/https://doi.org/10.1016/j.arabjc.2017.05.003.
- F. C. ZIMMER et al., “Application of Factorial Design for Optimization of the Synthesis of Lactulose Obtained from Whey Permeate,” J. Braz. Chem. Soc., 28, 12, 2326 (2017).
- E. I. SETYAWAN et al., “Application of Factorial Design on the Extraction of Green Tea Leaves (Camellia Sinensis L.),” J. Appl. Pharma. Sci., 8, 4, 131 (2018).
- V. PONNUSAMI et al., “Biosorption of Reactive Dye Using Acid-Treated Rice Husk: Factorial Design Analysis,” J. Hazard. Mater., 142, 1–2, 397 (2007); https://doi.org/https://doi.org/10.1016/j.jhazmat.2006.08.040.
- J. JAYNES et al., “Application of Fractional Factorial Designs to Study Drug Combinations,” Stat. Med., 32, 2, 1 (2013); https://doi.org/https://doi.org/10.1002/sim.5526.
- I. D. SREDOVIC IGNJATOVIC et al., “Experimental Design Optimization of the Determination of Total Halogens in Coal by Combustion-Ion Chromatography,” Anal. Lett., 48, 16, 2597 (2015); https://doi.org/https://doi.org/10.1080/00032719.2015.1041029.
- L. V. ANDERSON and A. R. McLEAN, Design of Experiments: A Realistic Approach, Vol. 5, Marcel Dekker Inc. (1974).
- D. C. MONTGOMERY, Design and Analysis of Experiments, 4th ed., John Wiley & Sons (1997).
- A. BOZKIR and O. M. SAKA, “Formulation and Investigation of 5−FU Nanoparticles with Factorial Design-Based Studies,” II Farmaco, 60, 10, 840 (2005); https://doi.org/https://doi.org/10.1016/j.farmac.2005.06.016.
- C. F. J. WU and M. HAMADA, Experiments: Planning, Analysis and Parameter Design Optimization, 2nd ed., Wiley, New York (2009).
- A. ELHALIL et al., “Factorial Experimental Design for the Optimization of Catalytic Degradation of Malachite Green Dye in Aqueous Solution by Fenton Process,” Water Resour. Ind., 15, 41 (2016); https://doi.org/https://doi.org/10.1016/j.wri.2016.07.002.
- P. BASU, R. SARANGAPANI and B. VENKATRAMAN, “Compact Shielding Design for 740 GBq 241Am-Be Neutron Source Transport Container,” Radiat. Phys. Chem., 170, 108670 (2020); https://doi.org/https://doi.org/10.1016/j.radphyschem.2019.108670.
- F. ZHANG et al., “Compact Shielding Design of a Portable 241Am-Be Source,” Appl. Radiat. Isot., 128, 49 (2017); https://doi.org/https://doi.org/10.1016/j.apradiso.2017.06.033.
- N. H. MOADAB and M. K. SAADI, “Optimization of an Am-Be Neutron Source Shield Design by Advanced Materials Using MCNP Code,” Radiat. Phys. Chem., 158, 109 (2019); https://doi.org/https://doi.org/10.1016/j.radphyschem.2019.01.026.
- G. VENKATARAMAN, J. DAYASHANKAR, and J. S. JAYAKAR, “The Gamma to Neutron Ratios for Pu-Be and Am-Be Neutron Sources,” Nucl. Instrum. Methods, 82, 49 (1970); https://doi.org/https://doi.org/10.1016/0029-554X(70)90323-X.
- Z. LIU et al., “The 4.438 MeV Gamma to Neutron Ratio for the Am-Be Neutron Source,” Appl. Radiat. Isot., 65, 1318 (2007); https://doi.org/https://doi.org/10.1016/j.apradiso.2007.04.007.
- I. MURATA et al., “Neutron and Gamma-Ray Source-Term Characterization of Am-Be Sources in Osaka University,” Prog. Nucl. Sci. Technol., 4, 345 (2014); https://doi.org/https://doi.org/10.15669/pnst.4.345.
- “MCNP—Monte Carlo Neutron and Photon Transport Code,” Version 4A, RSICC–CCC–200, Oak Ridge National Laboratory (1997).
- H. H. ROSSI, “NCRP Scientific Committee 4 on Heavy Particles, Protection Against Neutron Radiation,” NCRP−38, National Council on Radiation Protection and Measurements (1971).
- “Neutron and Gamma-Ray Flux-to-Dose-Rate Factors,” ANSI/ANS−6.1.1, American Nuclear Society, La Grange Park, Illinois (1977).
- S. C. R. SANTOS and R. A. R. BOAVENTURA, “Adsorption Modelling of Textile Dyes by Sepiolite,” Appl. Clay Sci., 42, 137 (2008); https://doi.org/https://doi.org/10.1016/j.clay.2008.01.002.
- “Regulations for the Safe Transport of Radioactive Material. Specific Safety Requirements,” IAEA Safety Standards Series No SSR−6, International Atomic Energy Agency (2018).