ABSTRACT
The magnetically driven fluid flow and solidification process in a curved round bloom continuous caster for production of a highstrength low-alloy steel grade (Q345) with the diameter of ø600mm by a combined rotary electromagnetic stirring including the mold, the strand and the final electromagnetic stirring (M+S+F-EMS) is numerically described. The strand surface temperature and the solidified shell thickness are compared and validated by the available measured data. The magnetic field, fluid flow, temperature field and macrosolidification behaviors under the combined electromagnetic stirring are analyzed. The effects of casting speed and the position of the FEMS on the solidification and electromagnetic stirring are focused. Results show that the variation of casting speed is very important to control the length of liquid core and the solidification pool thickness for a large-size round bloom. The pool thickness and liquid fraction of the melt determines the range of the optimum stirring location and the effectiveness of the final electromagnetic stirring.
Acknowledgements
The authors gratefully acknowledge the support of the National Natural Science Foundation of China (grant number 51774098).
Disclosure statement
No potential conflict of interest was reported by the author(s).
Correction Statement
This article has been republished with minor changes. These changes do not impact the academic content of the article.