References
- Pardeshi R, Singh AK, Dutta P. Modeling of solidification process in a rotary electromagnetic stirrer. Numer Heat Transf A. 2009;55:42–57. doi:https://doi.org/10.1080/10407780802553961.
- Wang BX, Chen W, Chen Y, et al. Coupled numerical simulation on electromagnetic field and flow field in the round billet mould with electromagnetic stirring. Ironmak Steelmak. 2015;42:63–69. doi:https://doi.org/10.1179/1743281214Y.0000000201.
- Yu HQ, Zhu MY. Influence of electromagnetic stirring on transport phenomena in round billet continuous casting mould and macrostructure of high carbon steel billet. Ironmak Steelmak. 2012;39:574–584. doi:https://doi.org/10.1179/0301923312z.00000000058.
- Natarajan TT, El-Kaddah N. Finite element analysis of electromagnetic and fluid flow phenomena in rotary electromagnetic stirring of steel. Appl Math Model. 2004;28:47–61. doi:https://doi.org/10.1016/s0307-904x(03)00114-8.
- Natarajan TT, El-Kaddah N. Finite element analysis of electromagnetically driven flow in sub-mold stirring of steel Billets and slabs. ISIJ Int. 1998;38:680–689. doi:https://doi.org/10.2355/isijinternational.38.680.
- Barna M, Javurek M, Reiter J, et al. Numerical simulations of mould electromagnetic stirring for round bloom strands. BHM Berg-Und Hüttenmännische Monatsh. 2009;154:518–522. doi:https://doi.org/10.1007/s00501-009-0509-3.
- Barna M, Javurek M, Willers B, et al. Numeric simulations of a liquid metal model of a bloom caster under the effect of rotary electromagnetic stirring. IOP Conf Ser: Mater Sci Eng. 2016;143:012027. doi:https://doi.org/10.1088/1757-899x/143/1/012027.
- Jiang D, Zhu MY. Flow and solidification in billet continuous casting machine with dual electromagnetic stirrings of mold and the final solidification. Steel Res Int. 2015;86:993–1003. doi:https://doi.org/10.1002/srin.201400281.
- Jiang D, Zhu MY. Solidification structure and macrosegregation of billet continuous casting process with dual eectromagnetic stirrings in mold and final Stage of Solidification: A numerical study. Metall Mater Trans B. 2016;47:3446–3458. doi:https://doi.org/10.1007/s11663-016-0772-0.
- Ren BZ, Chen D, Wang HD, et al. Numerical analysis of Coupled turbulent flow and macroscopic solidification in a round bloom continuous casting mold with electromagnetic stirring. Steel Res Int. 2015;86:1104–1115. doi:https://doi.org/10.1002/srin.201400178.
- Maurya A, Jha PK. Influence of electromagnetic stirrer position on fluid flow and solidification in continuous casting mold. Appl Math Model. 2017;48:736–748. doi:https://doi.org/10.1016/j.apm.2017.02.029.
- Trindade LB, Nadalon JEA, Contini AC, et al. Modeling of solidification in continuous casting round billet with mold electromagnetic stirring (M-EMS). Steel Res Int. 2017;88:1–8. doi:https://doi.org/10.1002/srin.201600319.
- Ayata K, Mori T, Fujimoto T, et al. Improvement of macrosegregation in continuously cast bloom and billet by electromagnetic stirring. Trans Iron Steel Inst Japan. 1984;24:931–939. doi:https://doi.org/10.2355/isijinternational1966.24.931.
- Li JC, Wang BF, Ma YL, et al. Effect of complex electromagnetic stirring on inner quality of high carbon steel bloom. Mater Sci Eng A. 2006;425:201–204. doi:https://doi.org/10.1016/j.msea.2006.03.061.
- Oh KS, Chang YW. Macrosegregation behavior in continuously cast high carbon steel blooms and billets at the final stage of solidification in combination stirring. ISIJ Int. 1995;35:866–875. doi:https://doi.org/10.2355/isijinternational.35.866.
- Rui G, Ji C, Zhu MY. Modeling the effect of combined electromagnetic stirring modes on macrosegregation in continuous casting blooms. Metall Mater Trans B. 2020;51:1137–1153. doi:https://doi.org/10.1007/s11663-020-01827-7.
- Liu HP, Xu MG, Qiu ST, et al. Numerical simulation of fluid flow in a round bloom mold with In-mold rotary electromagnetic stirring. Metall Mater Trans B. 2012;43:1657–1675. doi:https://doi.org/10.1007/s11663-012-9737-0.
- Liu HP, Wang ZY, Qiu H. Numerical simulation of fluid flow and solidification in a vertical round bloom caster using a four-port SEN with mold and strand electromagnetic stirring. ISIJ Int. 2020;60:1924–1937. doi:https://doi.org/10.2355/isijinternational.ISIJINT-2019-738.
- Liu HP, Yang CZ, Zhang H, et al. Numerical simulation of fluid flow and thermal characteristics of thin slab in the funnel-type molds of two casters. ISIJ Int. 2011;51:392–401. doi:https://doi.org/10.2355/isijinternational.51.392.