Drying Characteristics In Superheated Steam Drying at Reduced Pressure

Abstract

The superheated steam drying at reduced pressure is performed, and the effects of operational conditions such as drying pressure and temperature on the drying characteristics are examined. In order to obtain the basic guideline for the design of the superheated steam dryer at reduced pressure, the heat flux to sample was calculated and the optimal conditions were estimated.

After the sample temperature reached at the boiling point, the temperature was maintained at the boiling point and the drying rate became almost constant. Once the sample was dried out, the temperature suddenly increased up to the drying gas temperature. From the calculation of combined heat flux, the followings were found. The contribution of radiative heat transfer to the combined heat flux became larger as the drying pressure was lower. The combined heat flux had a maximum value against the drying pressure. The optimum drying pressure, which gave the maximum heat flux, became lower as the drying gas temperature decreased. It was found that reduction in the drying pressure is effective for the enhancement in drying performance.

Keywords:

• Combined heat flux
• Drying gas temperature
• Optimum drying pressure
• Superheated steam

ACKNOWLEDGMENTS

This study was supported by the Feasibility Study (F/S) Project of Japan, Small and Medium Enterprise Corporation in 2000.