Evaluation of the performance of microcrystalline cellulose in retarding degradation of two epoxy resin systems

Abstract

Accelerated weathering studies are necessary to determine future risks arising from the loss of durability of materials under environmental conditions (e.g. ultraviolet irradiation from the sun, moisture from rainfall, temperature cycling). The influence of different accelerated weathering conditions such as UV light and moisture on the properties of two epoxy resin systems incorporating microcrystalline cellulose (MCC) was evaluated. This study aimed to assess changes in chemical properties (FTIR), mechanical properties (tensile tests), thermal properties (TGA and DSC) and morphology (SEM) before and after accelerated weathering. The samples exposed to different accelerated weathering times (1, 2, 3, 4, and 6 months) were based on the diglycidyl ether of bisphenol A, DGEBA, or hydrogenated diglycidyl ether of bisphenol A, HDGEBA, with amine crosslinker (2,2,4-trimethyl-1,6-hexanediamine, TMDA) and 2% MCC. Incorporation of MCC improved thermal stability, reduced surface oxidation, and gave better retention of mechanical properties after accelerated weathering. Both epoxy resins and epoxy composites exhibited a reduction in the tensile strength upon accelerated weathering with the composites showing less reduction in the tensile strength after 6 months. The glass transition temperatures (T_g) before and after accelerated weathering were also measured. DGEBA-TMDA/2%MCC and HDGEBA-TMDA/2% MCC composites reduced the decrease in the T_g after accelerated weathering, compared to that of DGEBA-TMDA and HDGEBA-TMDA samples. Degradation primarily decreased the mechanical properties of the composites, with some damaged specimens showing on the surfaces of DGEBA-TMDA/2% epoxy composites and HGEBA-TMDA/2%MCC composites. Fewer morphological changes with limited voids were seen on the DGEBA epoxy interface for HDGEBA compared to DGEBA composite samples. Incorporation of 2%MCC in DGEBA-TMDA and HDGEBA-TMDA increased resistance to thermal degradation after accelerated weathering.

keywords:

• Accelerated weathering
• epoxy resin
• thermal stability
• microcrystalline cellulose
• tensile strength

Acknowledgments

The authors gratefully acknowledge Mr. Andrew Wallace, Mr. Wayne Dillon, Mr. Tony Mackinnon, Mr. Malcom Lambert, and Mr. John Pesor for instrumental assistance. Mr. Awad’s studies are supported by The University of New England in Australia, the Higher Committee for Education Development (HCED), and The University of Anbar in Iraq.We wish to thank Dr. Jason Watling of Brien Holden Ltd. NSW, Australia, for the generous supply of the UV treatment chamber.