Vibration analysis of rotating fully-bonded and delaminated sandwich beam with CNTRC face sheets and AL-foam flexible core in thermal and moisture environments

Abstract

In the present study, the high-order free vibration analysis of rotating fully-bonded and delaminated sandwich beams; with and without vertical contact; containing AL-foam flexible core and carbon nanotubes reinforced composite (CNTRC) face sheets subjected to thermal and moisture field are investigated by using generalized differential quadrature method (GDQM). The compressible core and face sheets of sandwich beam, respectively, are composed of Aluminum alloy foam with variable mechanical properties in the thickness direction and CNTRC with temperature dependent material properties. In this study, the high-order sandwich panel theory (HSAPT) for AL-foam flexible core and Euler-Bernoulli beam theory for CNTRC face sheets are considered. By employing Hamilton’s principle, the governing partial differential equations of motion and associated boundary and continuity conditions for various types of regions (fully-bonded, delaminated with contact, delaminated without contact) are derived and then discretized by using GDQM. The final formulations lead to 14 partial differential equations for the entire structure including five equations for fully-bonded two-headed parts of AL-foam cored sandwich beam (AL-FCSB) and four equations for delaminated middle part of AL-FCSB beam which are combined in axial and transverse deformations. A parametric study is performed to investigate the influence of some important parameters such as existence of delaminated region, type of delaminated region (with or without contact), longitudinal position of delaminated region, slenderness ratio, face sheet thickness ratio, CNT volume fraction, temperature rise, moisture concentration, rotating speed, and hub radius. The obtained results reveal that the 1st frequency of delaminated AL-FCSB beam, whether with or without vertical contact, is less remarkably than ones of fully-bonded AL-FCSB beam which its value for the case of delaminated ‘with contact’ is larger than that of ‘without contact’. Moreover, the 1st frequency variation of the delaminated AL-FCSB beam is symmetrical with regard to the longitudinal position of the debonded region such that the 1st natural frequency declines with moving the debonded region toward the center of the beam. The study of vibration behavior of rotating sandwich beams is very important in design of rotating structural systems, specially damaged ones, such as airplanes, helicopter rotor blades, and robot arms. One of the most important types of damage encountered in mentioned cases is the decomposition of two layers or delamination. Working these rotating structures in the media, are always along with variations of temperature and humidity and hence their mechanical properties may be changed due to the environment conditions.

Communicated by S. Velinsky

Keywords:

• High-order sandwich panel theory
• delamination
• contact
• AL-foam flexible core
• CNT reinforced nanocomposite face sheets

Acknowledgments

The authors would like to thank the referees for their valuable comments and their suggestions to improve the clarity of this research.

Declaration of conflicting interests

The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Additional information

Funding

The authors are thankful to the Iranian Nanotechnology Development Committee for their financial support and the University of Kashan for supporting this work by Grant No. 682561/6