![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
The cutouts are commonly found in fiber metal laminates to facilitate to pass electrical wires, water/fuel lines and sometime to facilitate easy access and inspection. Sometimes, such cutouts need to be reinforced by providing stiffener around the cutouts to avoid pre-mature failures. This article addresses the effects of reinforced cutouts and non-linearly varying edge loads on the vibration and buckling performance of inter laminar hybrid fiber metal laminates (HFMLs) by utilizing finite element approach. Toward this a 9-noded heterosis plate element has been used to discretize both plate and stiffener by taking into account the effect of shear deformation and rotary inertia. The stiffener considered in this study is spread in nature. The displacement compatibility by the plate and stiffener is maintained by using transformation matrix. The effect of eccentricity of the spread stiffener is also incorporated within the transformation matrix. Since the stress distribution within the plate is highly non-uniform in nature, the dynamic approach has been used to solve the buckling problems. The present study consists of aluminum metal face sheets bonded with four layered symmetric hybrid cross-ply laminates, in which six different hybrid configurations have been considered. The performance of each hybrid configuration along with different sized and positioned reinforced cutouts is well investigated under various nonlinear loading conditions.