ABSTRACT
Underground in situ pyrolysis mining of coal will be a new trend for utilizing coal resources in the future. Steam heating is a feasible and key technology used in this process. Investigating the evolution mechanism of microstructural parameters during coal in situ steam pyrolysis is essential. The influence of external stress on microstructural parameters of coal has not been considered in previous studies. Herein, the permeability and fracture structure parameters of bituminous coal subjected to in situ steam pyrolysis were studied using a high-temperature and high-pressure triaxial testing machine combined with in situ micro-computed tomography (micro-CT) technology. Moreover, the advantages of steam pyrolysis were revealed by comparing it with the natural pyrolysis process. Results showed that (1) the evolution law of fracture ratio and the proportion of large fractures (equivalent fracture diameter R >100 μm) with temperature is consistent. The proportion of large fractures has a considerable impact on the fracture ratio. (2) From 25°C to 600°C, the permeability and fracture structure parameters of bituminous coal exhibit an “increase – decrease–increase” trend with increasing temperature. The threshold temperature points for changing fracture structure parameters are 300°C and 400°C. The promoting effect of pyrolysis on fracture structure parameters competes with the inhibition effect of external stress on fracture development, determining the evolution law of fracture structure parameters with temperature. (3) The threshold temperature zone where the microstructural parameters change considerably is 400°C–600°C. The fracture ratio, proportion of large fractures, and permeability of coal increase considerably. (4) Unlike natural pyrolysis, steam pyrolysis promotes the advancement of threshold temperature point. After 450°C, steam pyrolysis promotes the development of large fractures (R >100 μm) and the fracture ratio is about twice that observed in case of natural pyrolysis. These findings provide theoretical support for the engineering practice of coal in situ underground pyrolysis mining and are of great importance to the development of micromechanics.
Acknowledgements
This work was supported by the National Natural Science Foundation of China (No. 51974191 and 12102293). The authors would like to thank Wenqian Wang from Shiyanjia Lab (www.shiyanjia.com) for enhancing the language in the manuscript. The authors greatly appreciate the suggestions from the anonymous reviewers for improving the paper’s quality.
Disclosure statement
No potential conflict of interest was reported by the authors.
Credit authorship contribution statement
Jianhang Shi: Conceptualization, Methodology, Validation, Visualization, Writing-original draft, Writing-review and editing. Zengchao Feng: Investigation, Writing-review and editing, Su-pervision, Resources, and Project administration. Dong Zhou: Supervision, Project administration, Resources. Xuecheng Li: Investigation. Qiaorong Meng: Resources.
Additional information
Funding
Notes on contributors
Jianhang Shi
Jianhang Shi is a Ph.D. candidate at Taiyuan University of Technology, main engaged in research on in-situ pyrolysis mining of coal.
Zengchao Feng
Zengchao Feng is a professor at Taiyuan University of Technology. He is engaged in teaching and research in the fields of mining engineering and rock mechanics.
Dong Zhou
Dong Zhou is an associate professor at Taiyuan University of Technology, mainly engaged in the exploration and development of coalbed methane.
Xuecheng Li
Xuecheng Li is a Ph.D. candidate at Taiyuan University of Technology, specializing in high temperature rock mechanics.
Qiaorong Meng is an associate professor at Taiyuan University of Technology, mainly engaged in the microstructure of coal.