Pool boiling heat transfer of water and nanofluid outside the surface with higher roughness and different wettability

ABSTRACT

In order to investigate the effect of surface wettability on the pool boiling heat transfer, nucleate pool boiling experiments were conducted with deionized water and silica based nanofluid. A higher surface roughness value in the range of 3.9 ~ 6.0μm was tested. The contact angle was from 4.7° to 153°, and heat flux was from 30kW/m² to 300kW/m². Experimental results showed that hydrophilicity diminish the boiling heat transfer of silica nanofluid on the surfaces with higher roughness. As the increment of nanofluid mass concentration from 0.025% to 0.1%, a further reduction of heat transfer coefficient was observed. For the super hydrophobic surface with higher roughness (contact angle 153.0°), boiling heat transfer was enhanced at heat flux less than 93 kW/m², and then the heat transfer degraded at higher heat flux.

KEYWORDS:

• Super hydrophilic
• super hydrophobic
• pool boiling
• heat transfer

Additional information

Funding

This work was supported by the National Natural Science Foundation of China [51776160]; National Key R&D Program of China [2016YFB0601200].