Pool boiling heat transfer of water and nanofluid outside the surface with higher roughness and different wettability

References

• S. U. S. Choi and J. A. Eastman, “Enhancing thermal conductivity of fluids with nanoparticles,” ASME-Publications-Fed, vol. 231, pp. 99–105, 1995.
   Google Scholar
• M. Karimzadehkhouei, M. Shojaeian, K. Şendur, M. P. Mengüç, and A. Koşar, “The effect of nanoparticle type and nanoparticle mass fraction on heat transfer enhancement in pool boiling,” Int. J. Heat. Mass. Transf, vol. 109, pp. 157–166, 2017.
   Web of Science ®Google Scholar
• J. Ham, H. Kim, Y. Shin, and H. Cho, “Experimental investigation of pool boiling characteristics in Al2O3 nanofluid according to surface roughness and concentration,” Int. J. Thermal Sci., vol. Vol.114, pp. 86–97, 2017.
   Web of Science ®Google Scholar
• X. Quan, D. Wang, and P. Cheng, “An experimental investigation on wettability effects of nanoparticles in pool boiling of a nanofluid,” Int. J. Heat. Mass. Transf, vol. 108, pp. 32–40, 2017.
   Web of Science ®Google Scholar
• I. S. Kiyomura, L. L. Manetti, A. P. Da Cunha, G. Ribatski, and E. M. Cardoso, “An analysis of the effects of nanoparticles deposition on characteristics of the heating surface and on pool boiling of water,” Int. J. Heat. Mass. Transf, vol. 106, pp. 666–674, 2017.
   Web of Science ®Google Scholar
• S. Das, D. S. Kumar, and S. Bhaumik, “Experimental study of nucleate pool boiling heat transfer of water on silicon oxide nanoparticle coated copper heating surface,” Appl. Thermal. Eng., vol. 96, pp. 555–567, 2016.
   Web of Science ®Google Scholar
• A. Bolukbasi and D. Ciloglu, “Pool boiling heat transfer characteristics of vertical cylinder quenched by Sio2–water nanofluids,” Int. J. Thermal Sci., vol. 50, pp. 1013–1021, 2011.
   Web of Science ®Google Scholar
• T. Sayahi and M. Bahrami, “Investigation on the effect of type and size of nanoparticles and surfactant on pool boiling heat transfer of nanofluids,” J. Heat. Transfer, vol. 138, pp. 031502, 2015.
   Web of Science ®Google Scholar
• M. M. Sarafraz, T. Kiani, and F. Hormozi, “Critical heat flux and pool boiling heat transfer analysis of synthesized zirconia aqueous nano-fluids,” International. Communications. Heat. Mass. Transfer, vol. 70, pp. 75–83, 2016.
   Web of Science ®Google Scholar
• R. Kathiravan, R. Kumar, A. Gupta, and R. Chandra, “Characterization and pool boiling heat transfer studies of nanofluids,” J. Heat. Transfer, vol. 131, pp. 081902, 2009.
   Web of Science ®Google Scholar
• J. T. Cieslinski and T. Z. Kaczmarczyk, “Pool boiling of water-Al2O3 and water-cu nanofluids on horizontal smooth tubes,” Nanoscale. Res. Lett, vol. 6, pp. 220, 2011.
   PubMed Web of Science ®Google Scholar
• A. Amiri, et al., “Pool boiling heat transfer of CNT/Water nanofluids,” Appl. Thermal. Eng., vol. 71, pp. 450–459, 2014.
   Web of Science ®Google Scholar
• R. Kathiravan, R. Kumar, A. Gupta, R. Chandra, and P. K. Jain, “Pool boiling characteristics of multiwalled Carbon Nanotube (CNT) based nanofluids over a flat plate heater,” Int. J. Heat. Mass. Transf, vol. 54, pp. 1289–1296, 2011.
   Web of Science ®Google Scholar
• H. Peng, G. Ding, H. Hu, and W. Jiang, “Influence of carbon nanotubes on nucleate pool boiling heat transfer characteristics of refrigerant–oil mixture,” Int. J. Thermal Sci., vol. 49, pp. 2428–2438, 2010.
   Web of Science ®Google Scholar
• M. M. Sarafraz and F. Hormozi, “Experimental investigation on the pool boiling heat transfer to aqueous multi-walled carbon nanotube nanofluids on the micro-finned surfaces,” Int. J. Thermal Sci., vol. 100, pp. 255–266, 2016.
   Web of Science ®Google Scholar
• D. Quéré, “Non-sticking drops,” Rep. Prog. Phys., vol. 68, pp. 2495–2532, 2005.
   Web of Science ®Google Scholar
• R. Wang, et al., “Light-induced amphiphilic surfaces,” Nature, vol. 388, pp. 431–432, 1997.
   Web of Science ®Google Scholar
• H. Yu, et al., “Fabrication of durable superamphiphobic aluminum alloy surfaces with anisotropic sliding by HS-WEDM and solution immersion processes,” Surf. Coat. Technol, vol. 275, pp. 112–119, 2015.
   Web of Science ®Google Scholar
• B. J. Zhang, R. Ganguly, K. J. Kim, and C. Y. Lee, “Control of pool boiling heat transfer through photo-induced wettability change of titania nanotube arrayed surface,” International. Communications. Heat. Mass. Transfer, vol. 81, pp. 124–130, 2017.
   Web of Science ®Google Scholar
• C. Kondou, S. Umemoto, S. Koyama, and Y. Mitooka, “Improving the heat dissipation performance of a looped thermosyphon using low-GWP volatile fluids R1234ze(Z) and R1234ze(E) with a super-hydrophilic boiling surface,” Appl. Thermal. Eng., vol. 118, pp. 147–158, 2017.
   Web of Science ®Google Scholar
• M. Tetreault-Friend, et al., “Critical heat flux maxima resulting from the controlled morphology of nanoporous hydrophilic surface layers,” Appl. Phys. Lett, vol. 108, pp. 243102, 2016.
   Web of Science ®Google Scholar
• I. Malavasi, B. Bourdon, P. Di Marco, J. De Coninck, and M. Marengo, “Appearance of a low superheat “quasi-leidenfrost” regime for boiling on superhydrophobic surfaces,” International. Communications. Heat. Mass. Transfer, vol. 63, pp. 1–7, 2015.
   Web of Science ®Google Scholar
• E. Teodori, et al., “Effect of extreme wetting scenarios on pool boiling conditions,” Appl. Thermal. Eng., vol. 115, pp. 1424–1437, 2017.
   Web of Science ®Google Scholar
• F. Villa, A. Georgoulas, M. Marengo, P. D. Marco, and J. D. Coninck, Pool boiling versus surface wettability characteristics, Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT’16), Prague, Czech Republic, April 4-5, pp. 110:1–8, 2016.
   Google Scholar
• L. W. Fan, et al., “Subcooled pool film boiling heat transfer from spheres with superhydrophobic surfaces: an experimental study,” J. Heat. Transfer, vol. 138, pp. 021503, 2015.
   Web of Science ®Google Scholar
• Y. Nam, G. Warrier, J. Wu, and Y. S. Ju, Experimental and numerical study of single bubble dynamics on a hydrophobic surface, ASME 2007 International Mechanical Engineering Congress and Exposition, Seattle, USA, Nov.11–15, pp. 301–307, 2007.
   Google Scholar
• Y. Li, K. Zhang, M. C. Lu, and C. Duan, “Single bubble dynamics on superheated superhydrophobic surfaces,” Int. J. Heat. Mass. Transf, vol. 99, pp. 521–531, 2016.
   Web of Science ®Google Scholar
• T. J. Hendricks, S. Krishnan, C. Choi, C. Chang, and B. Paul, “Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copper,” Int. J. Heat. Mass. Transf, vol. 53, pp. 3357–3365, 2010.
   Web of Science ®Google Scholar
• E. Forrest, et al., “Augmentation of nucleate boiling heat transfer and critical heat flux using nanoparticle thin-film coatings,” Int. J. Heat. Mass. Transf, vol. 53, pp. 58–67, 2010.
   Web of Science ®Google Scholar
• B. Bourdon, P. D. Marco, R. Rioboo, M. Marengo, and J. D. Coninck, “Enhancing the onset of pool boiling by wettability modification on nanometrically smooth surfaces,” International. Communications. Heat. Mass. Transfer, vol. 45, pp. 11–15, 2013.
   Web of Science ®Google Scholar
• B. Shi, Y. Wang, and K. Chen, “Pool boiling heat transfer enhancement with copper nanowire arrays,” Appl. Thermal. Eng., vol. 75, pp. 115–121, 2015.
   Web of Science ®Google Scholar
• L. Fan, J. Li, D. Li, L. Zhang, and Z. Yu, “Regulated transient pool boiling of water during quenching on nanostructured surfaces with modified wettability from superhydrophilic to superhydrophobic,” Int. J. Heat. Mass. Transf, vol. 76, pp. 81–89, 2014.
   Web of Science ®Google Scholar
• H. Jo, D. I. Yu, H. Noh, H. S. Park, and M. H. Kim, “Boiling on spatially controlled heterogeneous surfaces: wettability patterns on microstructures,” Appl. Phys. Lett, vol. 106, pp. 181602, 2015.
   Web of Science ®Google Scholar
• E. Teodori, T. Palma, T. Valente, A. S. Moita, and A. L. N. Moreira, Bubble dynamics and heat transfer for pool boiling on hydrophilic, superhydrophobic and biphilic surfaces, 7th European Thermal-Sciences Conference, Krakow, Poland, June 19–23,, Vol.745, p.032132, 2016.
   Google Scholar
• Z. Zhao, et al., “Thermal performance analysis of pool boiling on an enhanced surface modified by the combination of microstructures and wetting properties,” Appl. Thermal. Eng., vol. 117, pp. 417–426, 2017.
   Web of Science ®Google Scholar
• M. Zupančič, M. Steinbücher, P. Gregorčič, and I. Golobič, “Enhanced pool-boiling heat transfer on laser-made hydrophobic/superhydrophilic polydimethylsiloxane-silica patterned surfaces,” Appl. Thermal. Eng., vol. 91, pp. 288–297, 2015.
   Web of Science ®Google Scholar
• H. Jo, H. S. Ahn, S. Kang, and M. H. Kim, “A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces,” Int. J. Heat. Mass. Transf, vol. 54, pp. 5643–5652, 2011.
   Web of Science ®Google Scholar
• A. R. Betz, J. Jenkins, C. C. Kim, and D. Attinger, “Boiling heat transfer on superhydrophilic, superhydrophobic, and superbiphilic surfaces,” Int. J. Heat. Mass. Transf, vol. 57, pp. 733–741, 2013.
   Web of Science ®Google Scholar
• J. Kim, S. Jun, R. Laksnarain, and S. M. You, “Effect of surface roughness on pool boiling heat transfer at a heated surface having moderate wettability,” Int. J. Heat. Mass. Transf, vol. 101, pp. 992–1002, 2016.
   Web of Science ®Google Scholar
• S. J. Kline and F. A. Mcclintock, “Describing uncertainties in single sample experiments,” Mechanical. Eng., vol. 75, pp. 3–9, 1953.
   Google Scholar
• S. M. Yang and W. Q. Tao, Heat Transfer. Beijing, China: Higher Education Press, 2006, pp. 320–322.
   Google Scholar
• B. J. Jones, J. P. McHale, and S. V. Garimella, “The influence of surface roughness on nucleate pool boiling heat transfer,” J. Heat. Transfer, vol. 131, pp. 1–14, 2009.
   Web of Science ®Google Scholar
• S. R. Yang, R. H. Kim, and A. Mathematical, “Model of the pool boiling nucleation site density in terms of the surface characteristics,” Int. J. Heat. Mass. Transf, vol. 31, pp. 1127–1135, 1988.
   Web of Science ®Google Scholar
• Z. Liu and L. Liao, “Sorption and agglutination phenomenon of nanofluids on a plain heating surface during pool boiling,” Int. J. Heat. Mass. Transf, vol. 51, pp. 2593–2602, 2008.
   Web of Science ®Google Scholar
• D. Milanova and R. Kumar, “Heat transfer behavior of silica nanoparticles in pool boiling experiment,” J. Heat. Transfer, vol. 130, pp. 185–193, 2006.
   Web of Science ®Google Scholar
• C. Gerardi, J. Buongiorno, L. W. Hu, and T. McKrell, “Infrared thermometry study of nanofluid pool boiling phenomena,” Nanoscale. Res. Lett, vol. 6, pp. 232, 2011.
   PubMed Web of Science ®Google Scholar
• S. W. Xue, Y. Q. Li, Z. N. Xiao, Y. X. Wang, and K. Li, “Boiling heat transfer characteristics of water-based SiO2 nanofluids,” J. Chem. Ind. Eng., vol. (0),, pp. 1–9, 2017.
   Google Scholar
• J. Kim, A. Girard, S. Jun, J. Lee, and S. M. You, “Effect of surface roughness on pool boiling heat transfer of water on hydrophobic surfaces,” Int. J. Heat. Mass. Transf, vol. 118, pp. 802–811, 2018.
   Web of Science ®Google Scholar
• Y. Takata, S. Hidaka, and T. Uraguchi, “Boiling feature on a super water-repellent surface,” Heat. Transfer. Eng, vol. 27, pp. 25–30, 2006.
   Web of Science ®Google Scholar
• J. Kim, S. Jun, J. Lee, J. Godinez, and S. M. You, “Effect of surface roughness on pool boiling heat transfer of water on a superhydrophilic aluminum surface,” J. Heat. Transfer, vol. 139, pp. 101501, 2017.
   Web of Science ®Google Scholar
• A. R. Girard, J. Kim, and S. M. You, Pool boiling heat transfer of water on hydrophilic surfaces with different wettability, in: ASME 2016 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, 2016, pp. V008T010A018–V008T010A018.
   Google Scholar
• P. Berenson, “Film-boiling heat transfer from a horizontal surface,” J. Heat. Transfer, vol. 83, pp. 351–356, 1961.
   Google Scholar